Watch Next 😎👇 ✨ How To Sublimate Glitter HTV th-cam.com/video/R_8w6_atOXo/w-d-xo.html 🤩 Clear Glitter HTV On Top Of Sublimation th-cam.com/video/wkquOMFDtNE/w-d-xo.html 🥰 Make Your Own Pattern Glitter HTV with Sublimation th-cam.com/video/78_vQ4MpzAc/w-d-xo.html
I have looked over so many videos and tutorials trying to figure this out in Cricut , and I have to say yours was so easy to follow. It wasn't to fast, I could pause and go to my cricut design space and then back to your video. Thank you, Thank you, Thank you!!! Two days of frustration, quite a few sublimation printouts, and cutouts ruined trying to do a job as a newbie until You😍
I love doing it this way, but I peel the offset off the carrier sheet and put it on a piece of parchment then lay the sublimation on the glitter htv . ( I have a light box so I put it on that to line everything up) Then sub on the glitter then put the whole thing on the shirt. If you mess it up at least you are not ruining the shirt.
Genius! I was just wondering if something like that was possible or if it would ruin the glitter htv! Sometimes I learn as much from the comments section as the video! Thanks guys! PS I sure have missed Becky from DS.
@@jalajala4020 I do too. Actually you are doing the same amount of time under the heatpress. First sub then press like any other htv. I didn't think of this but watched youtube video of course.
Can you go into more detail please? I think I’d like to do it this way instead. Does pressing the sublimation image onto the htv first mess the vinyl up on the parchment? After pressing the sub image do you just flip the whole thing and place face done on the shirt? How long do you press that for? I wish I could find a video doing this but can’t seem to find anything that helps. I’m new so anything helps!
Really cute. Thank you for all the instructions. 💖💖💖 Just wondering why you didn't have the Cricut cut the sublimation design? I wouldn't be able to line it up so perfectly like you. 😁😁😁
Welp, THANK YOU! I did my FIRST shirt:). I know I messed up the top line glitter on mine -- it's three sections lol -- and it is is applied upside down LOL oops! and it did take me all dang day:) but I DID IT:) THANK YOU SO MUCH:)
If you're not going to let the Cricut cut out the sublimation sheet, why not just print to whatever size you want and not use print then cut? Just cut the vinyl, print the sheet from the PDF and line it up after? Save the trees! Haha not really, but get larger prints at least!
You can print right to your sawgrass from cricut without even having to open up PM. I do it all the time as long as it's not bigger than the print and cut allows.
Great tutorial, but when I go to save to PDF to print from Print Manager, I don't have the same screen or option as you to do that? Please can you tell me why? Thank you.
What printer, ink and paper are you using? I’ve spent hours and hours making adjustments, trying different ICC profiles, different shades, etc. My reds turn orange when sublimating on Siser white glitter. So frustrated!
@@DesignBundles I'm still learning the system and the process for both Cricut and sublimation, but the white HTV I have I have to layer a laminate over it so it doesnt come out bland and faded.
Why didn’t you just copy and paste the image instead of the layering and contouring? Wouldn’t it work just to have the same design twice and just print to cut one and cut the other.
Watch Next 😎👇
✨ How To Sublimate Glitter HTV
th-cam.com/video/R_8w6_atOXo/w-d-xo.html
🤩 Clear Glitter HTV On Top Of Sublimation
th-cam.com/video/wkquOMFDtNE/w-d-xo.html
🥰 Make Your Own Pattern Glitter HTV with Sublimation
th-cam.com/video/78_vQ4MpzAc/w-d-xo.html
I have looked over so many videos and tutorials trying to figure this out in Cricut , and I have to say yours was so easy to follow. It wasn't to fast, I could pause and go to my cricut design space and then back to your video. Thank you, Thank you, Thank you!!! Two days of frustration, quite a few sublimation printouts, and cutouts ruined trying to do a job as a newbie until You😍
Angela! Thank you for the kind words, we appreciate you stopping by and watching with us today. If you have any questions, please let us know 😊
I love doing it this way, but I peel the offset off the carrier sheet and put it on a piece of parchment then lay the sublimation on the glitter htv . ( I have a light box so I put it on that to line everything up) Then sub on the glitter then put the whole thing on the shirt. If you mess it up at least you are not ruining the shirt.
Genius! I was just wondering if something like that was possible or if it would ruin the glitter htv! Sometimes I learn as much from the comments section as the video! Thanks guys!
PS I sure have missed Becky from DS.
@@jalajala4020 I do too. Actually you are doing the same amount of time under the heatpress. First sub then press like any other htv. I didn't think of this but watched youtube video of course.
@@jalajala4020 Where did Becky go? I really learned a lot from her.
Can you go into more detail please? I think I’d like to do it this way instead. Does pressing the sublimation image onto the htv first mess the vinyl up on the parchment? After pressing the sub image do you just flip the whole thing and place face done on the shirt? How long do you press that for? I wish I could find a video doing this but can’t seem to find anything that helps. I’m new so anything helps!
So did you mirror the actual sublimation image and the glitter cutout? That part was confusing.
Love this 🥰
Thank you 😊
Nice video
Thank you, Good job 👍😊
Thank you so much
Really cute. Thank you for all the instructions.
💖💖💖
Just wondering why you didn't have the Cricut cut the sublimation design? I wouldn't be able to line it up so perfectly like you. 😁😁😁
Welp, THANK YOU! I did my FIRST shirt:). I know I messed up the top line glitter on mine -- it's three sections lol -- and it is is applied upside down LOL oops! and it did take me all dang day:) but I DID IT:) THANK YOU SO MUCH:)
If you're not going to let the Cricut cut out the sublimation sheet, why not just print to whatever size you want and not use print then cut? Just cut the vinyl, print the sheet from the PDF and line it up after? Save the trees! Haha not really, but get larger prints at least!
do you have to use only Siser white glitter?
You can print right to your sawgrass from cricut without even having to open up PM. I do it all the time as long as it's not bigger than the print and cut allows.
Great tip! Thank you for sharing - Agata
Hi when you are tacking down the htv do you need to put butcher paper on top ? I don't want the plastic to melt on my heat press 😊 thank you ❤️
Hi there! The HTV will have a carrier sheet and that is fine! You can also use butcher paper if you would like but it isn't necessary! - Dawn
Sister sparkle … can it be the clear or does it have to be the white ?
It can be either one! - Dawn
very cute. but i am a newbie to all this and have a quick question, does this type of sublimation feel plastic or rubbery when you wear it?
It does
@@jalajala4020 oh shoot, then i won't be a fan of doing clothing with it. Thanks for the response!
It does feel a little "plastic" because it is not like regular sublimation where it goes into the fabric.
Great tutorial, but when I go to save to PDF to print from Print Manager, I don't have the same screen or option as you to do that? Please can you tell me why? Thank you.
What type of device are you using?
What printer, ink and paper are you using? I’ve spent hours and hours making adjustments, trying different ICC profiles, different shades, etc. My reds turn orange when sublimating on Siser white glitter. So frustrated!
Hi Teressa, links to all of the products used can be found in the description box below the video 🙂
How do you cut the sub? I’m not having any luck cutting it with the Cricut maker 3
You could also try to "messy cut" around the design instead of having your machine cut it!
How would I do this on my Silhouette cameo?🤔
It would be really similar -- you would just use the print and cut features in Silhouette. 😊
Can regular white htv be used?
Yes! You can definitely use white HTV!
@@DesignBundles It depends on the HTV. If you are using the cheap stuff chances are it will look faded. But of course as you say it can be done.
@@DesignBundles I'm still learning the system and the process for both Cricut and sublimation, but the white HTV I have I have to layer a laminate over it so it doesnt come out bland and faded.
Does this process only work on glitter vinyl?
Hi Norma! We've also used clear matte HTV as well and it worked just as good! 😊
Why didn’t you just copy and paste the image instead of the layering and contouring? Wouldn’t it work just to have the same design twice and just print to cut one and cut the other.
Great suggestion! Thank you for your feedback! Definitely can print and cut one design and then just cut the second design!
Does this work on cricut glitter htv?
Yes it definitely should!
I guess I'm the first person to watch this video! So it is possible to sublimate on vinyl? Is that a special vinyl? Can you sublimate on any htv?
No, just a white or light colored glitter, glow ‘n the dark or EasySubli.
Or Siser Sparkle (I believe the white opal’s been tested too and worked).
Easy direction's for any newbie to follow. That's what most need. Thank you for dumbing it down so everyone can be able to do this
I really enjoyed this video, I’m a bit confused but I think I got it👍🏾👍🏾
As long as it is a light colored vinyl. 😊