Thank you so much for getting people such a good deal! My family got together and we bought some about two years back and by the grace of God haven't needed it yet. I know you know but please ignore all the people that blast you and give you such a hard time. I enjoy your videos! Thanks and keep up the good work.
They didn’t get covered up when I watch it. The video was shoved all the way to the bottom part of it was literally cut off I wonder if he moved it later or something 🤷🏼♂️
My great grandfather built his own house. The insert he used for his fireplace worked the same way. We still own the the house and I love that fireplace. Keep up the good work, you're doing great.
I think we may well be moving back to a time when all men had skills and competence and self reliance and masculinity. that or humanity chooses extinction.
Wait, what?! The video ended? That wasn't part of the deal! I was so emotionally invested in this stove getting built. I literally stopped what I was doing, and then unconsciously put everything down and got super comfortable, just imagining how toasty that stove would make any room. Mr. W, you make some very interesting content, that I wholeheartedly have been enjoying having recently found your channel.
Cody, I love it. Your like a brother I never had. After your opening comment, I couldn't quit laughing..Thanks for another great video! As always, your the man. God bless you, and your family!
Cody, I was impressed by the way you lined up the pipes, if it was me doing this job I would probably have used full length tubing and tag welded each tube in place before using the plasma cutter to trim them to length and then finish off the welds round each pipe, before moving on to the next one, so I bow down to your skill set.
So much ingenuity on this channel. Even though I will probably never make this exact wood stove, it will help guide my future choices now that you have passed on your wisdom by showing us how you do most of your awesome work!
I really felt it when he said "Oh don't worry I'll get it in." That last step before insanity when you've lost all reason, and you plant that flag and say yes I'm going to die on this hill if necessary, but I'm going to beat this thing.
Couldn't be better timing for this! We need to build one of these for our pole barn since we plan to pull the trailer in it for winter while we build! Thank you for the video!
I built a very similar top barrel for my workshop wood heater. Only I near filled the top barrel with pipe, leaving 1 inch spacing between pipes. Enclosed the back side with a 4 inch hole for the input pipe from a medium size fan, to feed air into the barrel heat exchanger from the back side and hot air out the front. I found that I needed 15' of chimney above the top barrel to pull a draft, and the unit is amazing at how it heats my entire 1400 sq/ft workshop in the dead of winter. Outside it can be -35c, and in the workshop I'm in a T-shirt. The air flow means no cold spots, and even heat from floor to ceiling.
I always love how I pick up little tricks when I watch your videos. You are braver than most showing the welds on youtube hehe. Thanks for showing us :)
Travel and wire speed are everything and then just lots of practice IT took me a bit in college but it will come now I can weld both left and right hand just takes time good job
"This is the hardest thing I've ever done in my life".. I laughed out loud because just last week I was replacing the shield on my face Shield mask and I couldn't snap the darn thing in place. I'm in my garage yelling and I thought to myself this is one of the hardest projects I've ever attempted😂😂. Thank for another great video. God bless all.
I have done this but had used more and larger tubes. With only 6 tubes I would have placed then on the upper half of the drum as that is the hottest part of the chamber and would be the most efficient use of your energy. I recommend putting the top outlet on the opposite end of the drum from the inlet, and for internal turbulence have the outlet side slightly lower than the inlet. Note - you must have the chamber completely sealed to do it this way or you will have exhaust gas seeping into your living/working area. Good job Cody, thanks for sharing!
Been a subscriber for ~10 years now. It will NEVER cease to impress me how brave you are. Doing metal work on TH-cam AND admitting you're not the best of all time... Wow! I can't imagine the comments that come your way. Keep it up!
I love that you put your struggles on the videos and poke fun at them. Especially knowing there will be people out there that try and bring you down over it. Always love your videos.
9:43 Oh boy does that bring back memories. Standing on top of a very steep hill welding gates off a generator on my folks farm. The tension screws weren't holding my welding lid up and it kept falling down over my face while I was trying to set up the electrode. I had my arm drawn back to thow it down the hill before realising it would be a 15 minute hike to retrieve it. Deep breaths, carry on....
Have you thought about trying small computer fans on each tube vs the box fan? They could be powered by a thermocouple heated by the stove itself. However the "box store box fan" is certainly an elegantly easy solution. :D Looking forward to seeing it in action!!!!
One of my favorite Wranglerstar videos of all time! Love the music and the frustration with the helmet at the end. Great heating project for the common homesteader.
Had a barrel stove back in the 80s. Yes, it is all about surface area. I always wondered why some one didn’t just tack weld a bunch of rebar all over one and call it The Hedgehog.
@5:45 just to clarify, when you add the fan you go from free convection to forced convection. Conduction would be if you made physical contact with the barrels themselves to transfer heat. Whether forced or free, convection is basically just the conduction of heat from the metal drum to the surrounding fluid (air) then from that fluid to you. Please note, this is all based off of my memory of my heat transfer classes and may not be word for word definitions.
Neat thing about hexagons, there are 6 equilateral triangles in one and all of the sides of these equilateral triangles is equal to the radius of the circle that they are located in. So once you draw your circle, take the radius of that circle and start walking it around the circle and you'll end up with a perfect hexagon.
@Wranglerstar - I always tell people that when cutting the holes for the pipes,, to cut the front normally, but the backside the pipes should be cut so the holes are 2+ inches lower. and the pipes in the back extend out a couple inches farther than the ones in the front. Purpose: the holes in the back are intakes, so when the stove is lite the pipes are heated and since heat rises it automatically draws air from the back the air is then superheated and blown out the front. it's far more effective than the simple straight pipe.
Yes, always have a few moments for some Beethoven. THE Rock Star of the Classical era.- Amen Brother on the welding. I was forced to teach myself (job demanded it) how to weld with an old Buzz Box Stick welder, MIG welders were just coming out and Very Expensive. Talk about a huge learning curve.
You make great videos. Seriously. Really great. Content, style, composition, length, lighting, wholesomeness, intellectual curiousity AND honesty, I could go on. MOAR.
Tip of the day when you go to replace your pilot bits for your holesaw look for the reverse cut bit will save you from breaking a bit. The hole saw doesn't grab when you make it through the pilot hole
I delivered and loaded a lot of heavy stuff working for UPS. I don't remember what they were but there were these enormous barrel shaped things we would have to load on the semis right at the end and your need help getting them on the truck and then you'd have to roll them around to reposition them because they were so big. Delivered a lot of particleboard furniture kits by myself with no dolly. It sucked at times. But I can understand a USPS worker being upset given Cody's location and I don't think y'all usually handle stuff that big.
Just like everything now days, welding helmets are getting techy. I'd much rather have good enough and simple than customizable and complicated. My cheap harbor freight auto darken helmet is 5 years old and works fine.
I like it man. As an Hvac guy I’m thinking you could extend them on one side and bring them all together to larger box and put a small blower to push air through the tubes and it could even supply other rooms in someone’s shop. Like the office and bathroom
This is brilliant. I love collaborating peoples expertise……. I’m probably going to do this now as I have the perfect shop with a cold bathroom and office.
The best way to gauge if you have correct amperage and wire speed is your welder should sound like bacon frying in a pan. It should be a consistent crackling. Love the welding videos. Awesome work!
I built our upper barrel with a single 8" ID pipe through the middle and push air through it with a all-metal 8" duct fan. When its real cold I slide my 8" auger attachment into the pipe to slow, circulate and capture more heat.
Seriously though, beyond the pride of work of making an aesthetically pleasing piece, you need perfect symmetry to maximize the Venturi effects peak efficiency. It's science.
Same effect, efficient principles based on the "All Nighter" stoves, Big Moe and Little Moe. My neighbor still runs a Little Moe, mint condition with exchanger tubes, original directional vents and the water jacket on the flue for hot water.
You left me hanging brother! Can't wait to see the barrel. I just got my two barrels a couple of days ago. I've got to get my parts. Thanks for teaching in a good way. As always keep walking with our KING!!
My Milwaukee has outlasted two of my neighbor's Dewalts, and I use mine far more than he uses his. You must have got a bad one. CS for Milwaukee is amazing, give them a call. Worst case scenario, it's video content.
I need the rest of this video tomorrow at the earliest! But really good job with your patience. I’d have thrown that thing in the trash way before I ever got it back together. Thanks for the lesson today.
Dresdon Acacin I have an Airco welder that will give either a run for thier money, but I would give an eyetooth for a bullet welder I could hook to a Continental engine out of a forklift and make it so it will run on gasoline or Woodgas .
Dresdon Acacin The really cool thing with a bullet style welder is that it's 3ph and has a,100%duty cylcle , as far as welding goes there is absolutely no comparison to a 3ph welder .I actually have a friend that has his dialed down to a particular brand of rod for his stick welder .If memory serves me correctly only the Big 40 is 3ph .
Word of advice. A flat (horizontal) weld is better for novice welders. Tack the pipe to the barrel then stand the barrel on end to weld. I am looking forward to seeing the complete stove.
I’d be down for an amateur welding competition. I guarantee you that I do the most amateur welds you’ve ever seen. Grinder and paint make me the welder I ain’t.
SPECIAL PRICING ON EMERGENCY FOOD FOR WRANGLERSTAR SUBSCRIBERS: preparewithwranglerstar.com/
I dropped my phone I was laughing so hard when you were talking about the mailman!
@Nick Piscitelli Maybe to make sure the opposite side was exactly the same so the pipes fit through straight
Wranglerstar wish more TH-camrs were like you consistent and quality content
If you wasn't a man of fath that helmet would had gotten a good cussing lol
Thank you so much for getting people such a good deal! My family got together and we bought some about two years back and by the grace of God haven't needed it yet. I know you know but please ignore all the people that blast you and give you such a hard time. I enjoy your videos! Thanks and keep up the good work.
"If discretion is the better part of valor, then sharing your welds on TH-cam is the better part of courage." That is hilarious! Quote of the Year.
An educated man I see, Thanks C.A.
For sure. Show welds or cutting a tree down on
TH-cam and people will tear you apart in the comments
I'm a pipeline welder, and I won't even share my welds on here. That statement is soooooo true, I had to play it for my wife, she laughed!
Grinder and paint makes me the welder I ain't! I see bbq black in the future now..
The way I see it, Cody's gotten to that point where he could show darn near anything and we'd watch it lol.
I love it when Cody talks to himself sometimes during these vids “this is the hardest thing I’ve ever done in my life” 😂
First sign of madness 🙄 , hope he s ok
Mine was named Hilda. Man was she ugly.
Of course I talk to myself... sometimes I need expert advice
I was lol. Too relateable
@@geoffreyhoran7396 Please say your joking.
The simplest of thing makes such a big difference, like using a smaller pipe to guide the bigger one through.
I was really impressed by that idea!
I concur!!🤣🤣 Us ‘East coasters’, would call that ‘Yankee ingenuity’!!😁
Glad I'm not the only one to appreciate a simple idea that I had never thought of. Props!
If you have more pipe, that center circle is screaming out to me.
I thought that was absolutely brilliant!!!
My favorite part is the end where the recommended videos covered up his welds. I seriously admire this mans trolling capabilities! :)
yeah, that got a genuine chuckle out of me
Lmao!
@thefilth thefury You lost me at Allah. Sorry
?
They didn’t get covered up when I watch it. The video was shoved all the way to the bottom part of it was literally cut off I wonder if he moved it later or something 🤷🏼♂️
I was at the store, and the storeperson called a connector "male" and one "female" so offensive. I stormed out. I only use gender neutral connectors.
How dare you assume the gender of the connectors! They are fluid and can be whatever they feel like! LOL
It's not "mail man" its "Male woman"😁
Lol
Literally laughed out loud. Good one. You made my day. I don't get out much ;-)
RogueShadowTCN Anderson Power Poles???
My great grandfather built his own house. The insert he used for his fireplace worked the same way. We still own the the house and I love that fireplace.
Keep up the good work, you're doing great.
I think we may well be moving back to a time when all men had skills and competence and self reliance and masculinity. that or humanity chooses extinction.
“This is the hardest thing I’ve ever done in my life.”
Oh I was rolling! Great video Cody
I love how polite you are at the starts and ends of your videos
Looked like you were throwing down a ghostbusters trap with the 220 plug. The rant with the helmet had me rolling. 100% me trying to do that lol.
I'm watching ghost busters for the first time while reading this comment. They just captured their first ghost in the hotel. Unbelievable timing!
Lol - "I'm not that guy.", and "I won't be content until I break something". I can relate to both of those situations.
Wait, what?! The video ended? That wasn't part of the deal! I was so emotionally invested in this stove getting built. I literally stopped what I was doing, and then unconsciously put everything down and got super comfortable, just imagining how toasty that stove would make any room.
Mr. W, you make some very interesting content, that I wholeheartedly have been enjoying having recently found your channel.
Cody, I love it. Your like a brother I never had. After your opening comment, I couldn't quit laughing..Thanks for another great video! As always, your the man. God bless you, and your family!
Cody, I was impressed by the way you lined up the pipes, if it was me doing this job I would probably have used full length tubing and tag welded each tube in place before using the plasma cutter to trim them to length and then finish off the welds round each pipe, before moving on to the next one, so I bow down to your skill set.
Love the subtle humor you throw in your videos. Enjoy them all. Keep up the good work.
Cody, I love your unapologetic nature. Keep up the great work!
So much ingenuity on this channel. Even though I will probably never make this exact wood stove, it will help guide my future choices now that you have passed on your wisdom by showing us how you do most of your awesome work!
Pretty sure I laughed out loud twice. Love the humor because it’s real humor , not contrived. Long time subscriber - love your videos.
I love these heat exchangers. Brilliant. I think you could have done like a 4x4 grid of 16 pipes, but still a great improvement from the last one
Never thought I watch your show for comedy. You making fun of those haters cracks me up keep doing what you're doing. 😂👍
The mailman joke quickly let me know I was in the right place. lol Subbed. :D
I really felt it when he said "Oh don't worry I'll get it in." That last step before insanity when you've lost all reason, and you plant that flag and say yes I'm going to die on this hill if necessary, but I'm going to beat this thing.
Couldn't be better timing for this! We need to build one of these for our pole barn since we plan to pull the trailer in it for winter while we build! Thank you for the video!
The welding helmet scene was hilarious! Thanks for laugh !!
I built a very similar top barrel for my workshop wood heater. Only I near filled the top barrel with pipe, leaving 1 inch spacing between pipes. Enclosed the back side with a 4 inch hole for the input pipe from a medium size fan, to feed air into the barrel heat exchanger from the back side and hot air out the front. I found that I needed 15' of chimney above the top barrel to pull a draft, and the unit is amazing at how it heats my entire 1400 sq/ft workshop in the dead of winter. Outside it can be -35c, and in the workshop I'm in a T-shirt. The air flow means no cold spots, and even heat from floor to ceiling.
Use a exhaust pipe expander to bell the ends of the tubing locking it in place, then weld.
If you look at 00:34 you can see what looks like an old exhaust reamer.
Nice tip
@@crazydad6119 thats what she said
Awesome tip. I kept waiting for one of the tubes to slide down inside the barrel
My thought was use the smaller hole saw then flare (or roll) the edge of the hole out to make a snug fit. But, I'm mister overthink overkill.
I always love how I pick up little tricks when I watch your videos. You are braver than most showing the welds on youtube hehe. Thanks for showing us :)
"DID HE JUST SAY MAILMAN". and the response to that made me an instant subscriber. 👍
Travel and wire speed are everything and then just lots of practice IT took me a bit in college but it will come now I can weld both left and right hand just takes time good job
"This is the hardest thing I've ever done in my life".. I laughed out loud because just last week I was replacing the shield on my face Shield mask and I couldn't snap the darn thing in place. I'm in my garage yelling and I thought to myself this is one of the hardest projects I've ever attempted😂😂. Thank for another great video. God bless all.
I have done this but had used more and larger tubes. With only 6 tubes I would have placed then on the upper half of the drum as that is the hottest part of the chamber and would be the most efficient use of your energy. I recommend putting the top outlet on the opposite end of the drum from the inlet, and for internal turbulence have the outlet side slightly lower than the inlet. Note - you must have the chamber completely sealed to do it this way or you will have exhaust gas seeping into your living/working area. Good job Cody, thanks for sharing!
My first job was screen printing the logos on pieces of “Miller blue” sheet metal, thousands and thousands of pieces of miller blue sheet metal...
The first video I watched on your channel was your first double barrel wood stove video.
"Love that Miller blue!" Spot on!
9.00 - 10.00 time frame gave me a chuckle, I enjoyed the snap editing Cody. Thanks for sharing!
I'm about 30 seconds from throwing this in the fire 😂
Brett Bond 🤣🤣
I love how you say things... you are not looking for the audience approval you say things like you think and that shows how honest you are..
Been a subscriber for ~10 years now. It will NEVER cease to impress me how brave you are. Doing metal work on TH-cam AND admitting you're not the best of all time... Wow! I can't imagine the comments that come your way. Keep it up!
I came back to comment. This is the first video I have seen of yours. Since this, I have watched 15 of your videos. Keep up the good life.
I love that you put your struggles on the videos and poke fun at them. Especially knowing there will be people out there that try and bring you down over it. Always love your videos.
Ryan Pitkin correct, and they have already. He knows TH-cam and how engagement works!
Got to the mailman convo instantly stopped the video and liked and subscribed @45 seconds in. Well done
I identify as a wood stove and this whole video is so offensive to me.
J dawg 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
I also identify as a wood stove ,but I'm stoked... what?
Stop blowing your hot air... smh
This comment is under appreciated
I was born a wood stove but now identify as a propane coal hybrid fire pit.
Don't label me. Reeeeee.
Lov the sarcasm in the beginning this is a great build. Really nice job on this channel.
“…rending their garments and tearing their hair...” Oh my goodness, I laughed so hard. Thank you for that!
Been a subscriber for over 6 years. Always my favorite channel!
"Did he say mailman?" Haha and the comments after were amazing.
to find the weight of the smoke take the weight of the consumables (wood?) - the weight of the Ash
I stopped watching at the 33 second mark. How dare you assume
He stole my childhood!
@@TerryDax Stole mine too! My iPhone is almost a year old, and they call us privileged!
9:43 Oh boy does that bring back memories.
Standing on top of a very steep hill welding gates off a generator on my folks farm.
The tension screws weren't holding my welding lid up and it kept falling down over my face while I was trying to set up the electrode.
I had my arm drawn back to thow it down the hill before realising it would be a 15 minute hike to retrieve it.
Deep breaths, carry on....
Have you thought about trying small computer fans on each tube vs the box fan? They could be powered by a thermocouple heated by the stove itself.
However the "box store box fan" is certainly an elegantly easy solution. :D
Looking forward to seeing it in action!!!!
And this is why I watch your channel. This is great.
Hahaha this was an awesome video! That helmet construction was comedy gold!
One of my favorite Wranglerstar videos of all time! Love the music and the frustration with the helmet at the end. Great heating project for the common homesteader.
Had a barrel stove back in the 80s. Yes, it is all about surface area. I always wondered why some one didn’t just tack weld a bunch of rebar all over one and call it The Hedgehog.
OldKbellGuy 🤣🤣
That's next weeks build, lol
@5:45 just to clarify, when you add the fan you go from free convection to forced convection. Conduction would be if you made physical contact with the barrels themselves to transfer heat. Whether forced or free, convection is basically just the conduction of heat from the metal drum to the surrounding fluid (air) then from that fluid to you. Please note, this is all based off of my memory of my heat transfer classes and may not be word for word definitions.
When you defined "mailman" I hit subscribe and thumbs up! : )
This thing is so cool. I dig this project a lot. As an engineer it was entertaining watching you pull the protractor out.
Neat thing about hexagons, there are 6 equilateral triangles in one and all of the sides of these equilateral triangles is equal to the radius of the circle that they are located in. So once you draw your circle, take the radius of that circle and start walking it around the circle and you'll end up with a perfect hexagon.
bc65925 Genius!
@Wranglerstar - I always tell people that when cutting the holes for the pipes,, to cut the front normally, but the backside the pipes should be cut so the holes are 2+ inches lower. and the pipes in the back extend out a couple inches farther than the ones in the front. Purpose: the holes in the back are intakes, so when the stove is lite the pipes are heated and since heat rises it automatically draws air from the back the air is then superheated and blown out the front. it's far more effective than the simple straight pipe.
“Is there anything prettier than Miller blue?”....... Yes, yes there is. Lincoln red.
Miller for plug in shop machines. Lincoln for gas mobile welder.
Your videos inspire me to do more around my house. Plus good fun to have a laugh or two as well.
Yes, always have a few moments for some Beethoven. THE Rock Star of the Classical era.- Amen Brother on the welding. I was forced to teach myself (job demanded it) how to weld with an old Buzz Box Stick welder, MIG welders were just coming out and Very Expensive. Talk about a huge learning curve.
What song was that during the protractor layout of the wholes?
@@jeffharris7144 Beethoven's "Moonlight Sonata"
@@Titus-as-the-Roman Thank you!!!
You make great videos. Seriously. Really great. Content, style, composition, length, lighting, wholesomeness, intellectual curiousity AND honesty, I could go on. MOAR.
The wood stove insurance companies fear
Tip of the day when you go to replace your pilot bits for your holesaw look for the reverse cut bit will save you from breaking a bit. The hole saw doesn't grab when you make it through the pilot hole
mark tufts I like that!! Great tip!!
We all felt the frustration at the end when you conveniently placed the end cards on your practice weld. Ha!
Probably the most entertaining video I've seen in a long time. Your humor level is great. You gave me a couple big belly laughs. Thank you.
"Mail Carrier" I don't mind delivering 50 gallon barrels and memory foam mattresses. 😉
I delivered and loaded a lot of heavy stuff working for UPS.
I don't remember what they were but there were these enormous barrel shaped things we would have to load on the semis right at the end and your need help getting them on the truck and then you'd have to roll them around to reposition them because they were so big.
Delivered a lot of particleboard furniture kits by myself with no dolly. It sucked at times. But I can understand a USPS worker being upset given Cody's location and I don't think y'all usually handle stuff that big.
Thanks for the great tips, and honesty! For the haters who need to "see" the welds.. Listen to the machine work! It doesn't lie! Thanks bro!
Just like everything now days, welding helmets are getting techy. I'd much rather have good enough and simple than customizable and complicated. My cheap harbor freight auto darken helmet is 5 years old and works fine.
I like it man. As an Hvac guy I’m thinking you could extend them on one side and bring them all together to larger box and put a small blower to push air through the tubes and it could even supply other rooms in someone’s shop. Like the office and bathroom
gtm624 WHOA!!! Creating a monster!!🤣🤣
This is brilliant. I love collaborating peoples expertise……. I’m probably going to do this now as I have the perfect shop with a cold bathroom and office.
I absolutely love the snarkiness! Hahahah "showing your welds on TH-cam is the better part of valor". Hahahahahahah
The best way to gauge if you have correct amperage and wire speed is your welder should sound like bacon frying in a pan. It should be a consistent crackling. Love the welding videos. Awesome work!
You can tell from the sound of the weld if its going good. and from the sound of the weld you was doing it was a bit off from a good weld.
I built our upper barrel with a single 8" ID pipe through the middle and push air through it with a all-metal 8" duct fan.
When its real cold I slide my 8" auger attachment into the pipe to slow, circulate and capture more heat.
Don't change, love the non-political correct commentary.
Wow Cody that’s some impressive math and angle finding that you did ON CAMERA! Well done!
Finally, a perfect example for kids why learning geometry is definitely relevant to your life.
thorzyan : Yeah, cuz it’s super important that the tubing is spaced perfectly, in case someone ever checks it with a caliper someday
Mark Pool as long as they're not metric calipers 🤣🤣
Seriously though, beyond the pride of work of making an aesthetically pleasing piece, you need perfect symmetry to maximize the Venturi effects peak efficiency. It's science.
Same effect, efficient principles based on the "All Nighter" stoves, Big Moe and Little Moe.
My neighbor still runs a Little Moe, mint condition with exchanger tubes, original directional vents and the water jacket on the flue for hot water.
I hear the Foose welding helmet adds 50hp to every weld.
You left me hanging brother! Can't wait to see the barrel. I just got my two barrels a couple of days ago. I've got to get my parts. Thanks for teaching in a good way. As always keep walking with our KING!!
“This is the hardest thing I’ve ever done in my life!” 😅🤣😂
Covering up those welds at the end was dastardly! We'll see them soon enough!
Looks like the Milwaukee couldn't handle a little work had to switch to the big boy Dewalt💪
Oh boy here we go!
This Milwaukie drill really sucks, my first and last Milwaukie,
@@wranglerstar agreed
Bam MasterJ813 lol ok bro
My Milwaukee has outlasted two of my neighbor's Dewalts, and I use mine far more than he uses his. You must have got a bad one. CS for Milwaukee is amazing, give them a call. Worst case scenario, it's video content.
I need the rest of this video tomorrow at the earliest! But really good job with your patience. I’d have thrown that thing in the trash way before I ever got it back together. Thanks for the lesson today.
“What in the cat hair is going on here!” That’s awesome! 😂
Using that EMT conduit to help guide in the 2" exhaust tubing was brilliant 👍
"Is tehre anything more beautiful than that Miller Blue?" Yes... Lincoln Red.
Dresdon Acacin I have an Airco welder that will give either a run for thier money, but I would give an eyetooth for a bullet welder I could hook to a Continental engine out of a forklift and make it so it will run on gasoline or Woodgas .
@@beckywatt5048 you might like a Lincoln Ranger series welder/generator
Dresdon Acacin The really cool thing with a bullet style welder is that it's 3ph and has a,100%duty cylcle , as far as welding goes there is absolutely no comparison to a 3ph welder .I actually have a friend that has his dialed down to a particular brand of rod for his stick welder .If memory serves me correctly only the Big 40 is 3ph .
Purple!
Ha! I love that you show your trials on video. Sometimes it feels like no matter how meticulous the planning, the project just can't go smoothly.
*You had me at TH-cam Thumbnail* 👍🎥🎬📹🔥
Word of advice. A flat (horizontal) weld is better for novice welders. Tack the pipe to the barrel then stand the barrel on end to weld. I am looking forward to seeing the complete stove.
Mark Thomas Hobbies great advice.
Lol that mailman thing had me laughing so hard.
I fabricated a heat exchange system for my fireplace using black pipe, fittings and a small fan. Definitely warms the room better.
oh my word!!!! I had to replay the video at the 33-38 second mark 4 times...... lol I think Im going to write that down.... lol
Salty CowGirl 🤣🤣
The first 40 seconds of this video made my day. Thank you
Mailman, how dare you!
In Gretta's voice
Mailman is sexist; mailperson sexist too. You have to say "unisex-person".
Brilliant idea with the small pipe to help line up the hole for the larger pipe
I want to see those welds! Perhaps you and I could have an amateur welding competition LOL
That would be a very sporting competition between your channels!
You haven’t put enough welding in your videos for me to judge who would win
I’d be down for an amateur welding competition. I guarantee you that I do the most amateur welds you’ve ever seen. Grinder and paint make me the welder I ain’t.
Robert Beattie That saying is true for so many of us LOL I like to think mine are at least presentable LOL
Torqued Up I learned/am learning doing tig. 90% of what we have at work is stainless so I had to learn that first.😳
Thank you for that welding hood clip. I’m starting to think you’re a master of the editing skills Mr wranglerstar!!!
"What in the cat hair is going on here!?" HAhaaha
Man, Cody really made my day with that little rant! My eyes are watering from laughing.