I love that you recogniozed the maker's experience as a repairman and that the truss rod nut, once removed allowed the rod to clear the soundboard. It's that little stuff that makes a world of difference. If not planned, what is litte, when not done properly, becomes very big down the road.
I wonder if the non-comment watching, self described curmudgeon, will acknowledge his silver playbutton. It may sound like I am complaining, but i am not. Ted amuses me because he experiences incremental success but it always happens even though he only produces videos and tells his fans that he will never read their comments. Its fascinating really. I love this channel and am happy for the guy
@@duckrutt I noticed they digitized and rereleased. Teds got fresh stuff tho. I do watch both I guess haha. The western tradition and lord of Bob Ross too. PBS is great.
The videos are always entertaining and very informative. I was gently coerced into teaching an instrument repair course with only a short luthier training with a Spanish guitar maker to my credit. You give me the confidence I needed to do this. You have my deeply felt gratitude.
I don't know where you live but here in New England a brisk fall day usually means lots of ticks. Check yourself over carefully and throw your clothes in the wash, or at least in the clothes dryer, to dislodge and kill the little buggers; then you can out in your pajamas and watch Ted work! (I live less than an hour away from Ground Zero for Lyme disease and so you can never be too careful! )
I have found, through the years; that it is easier to keep a tool (or knife) sharp, than it is to get it that way the first time. I think doing so also adds to its longevity. I have a translucent Arkansas stone that is so fine, it feels like a piece of cold glass. Nice work with the chisel.
Very cool. I really appreciated your discussion on sharpening your tools. Unfortunately, I’m 61 years old and try, though I might, I’ve never learned the art of putting a razors edge back on a dulled knife or chisel. Frustrating.
I really love watching you work. It's so clear that you really love what you do. I just hope that when I finally take my LP Studio in for a setup that the luthier near me cares as much about his/her work as you do.
I have been watching these neck resets and am no longer terrified of them, not that I’d try one myself, but I think I could trust one to someone. For sure I find these luthier vids relaxing
Thanks for sharing your sharpening system, Ted. I know there's a lot of videos and resources for learning about sharpening, but you're right that it's been fetishised. As with a bunch of woodworking and luthiery, though, what's good enough for Ted, it's more than good enough for me :-)
Apart from being the 100th comment - There is a technical precision to note with this channel, without it being too technically obscure. Excellent video!
I'm always impressed with Ted's scalpel work - Often enough my use will track off the line and create a deep scratch - my solution to this is to use the back of a number 11 exacto blade - to create the initial scoring mark and I follow with the blade - works every time but I've yet to trust myself again to just use the sharp side.
Fantastic information and history. I recently acquired a Bill DeLap classical. He only made 9 of them in the 80’s. Talked with Bill over the phone for more than an hour, two weeks ago. Bill built custom electrics for Allan Holdsworth as most may know. Still builds guitars in Monterey CA. But, like his business card states, “You get what you wait for”. 😊 Takes some time to get one of his amazing works of art.
Just getting back to my home garage after a test drive on my Mustang. It has new rear control arms, adjustable upper and lowers and sorta like Ted is doing here, a bunch of measuring and adjustments. Snagged my wife and myself a nice Latte from the local coffee shop, checked my notifications on the iPad on my workbench and boom! A perfect video to enjoy my coffee to 👍. Next is wash the car up and I’m ready for the drag strip next weekend. Life is good. Twodfrd is a contributing factor. I do have a co-workers Sears Teisco SilverTone model 319 on my bench. It’s been in the attic for years, it’s a 1960’s model, really decent shape and more importantly complete. It still has a strap on it, hardened with age, probably the origin one it was sold with. Should be a fun project! Lookin forward to starting that this week.
@@unknown-ub9rz - I saw a couple of other post like this, just copying I guess. Ted is a busy guy and I don’t think he spends much time reading comments. I’m really just posting to satisfy the algorithm. Once I posted the word “comment”…got static for that. The internet is a funny place, somebody always has a gripe of some sort.
Easy tiger, the guy is just sharing his about his car and a beautiful day. Reading about taking the missus out for a latte is a nice break from the usual. Good luck with that Teisco, attic finds are rare and great.
I can't tell you how much I look forward to your next videos...always so fascinating and enlightening! Suggestion.... you need to sell a T shirt that shows a fretboard and says, "polishing...polishing...polishing"... I would buy one!
Interesting guitar. I enjoyed the history on Bozo, as a Leo Kottke fan. Kottke played Bozos I believe at some point. Your talk got me remembering an old catalog I used to get in the mid-70's from a place called "Guitar's Friend". Hand lettered, with a sort of sepia toned hippie aesthetic, these were works of art, and they sold only the best acoustics, often smaller builders. I remember Gurians, Gianninis (the Craviola!), Mossmans, etc. Wish I'd kept those catalogs...
I once owned a Bozo 12 string back in 1970...it was a BEAST and beautifully appointed. Like many of my guitars I had to let it go for various reason$😒. Now own a Taylor 910ce. I would love to see you work with a Taylor new neck design. Love your videos. Keep on truck"n my man.
Love that I Always pickup something new from a Twoodfrd neck set session. That ridge of lacquer, where the neck meets the side, did in fact cause a heel to become rounded over. I dwasnt sure of the cause or prevention until now. Thank you for an another awesome video.
Your respectful approach to the traditions of repair can be applied to any walk of life. I believe the original maker is smiling above knowing his instrument found your capable hands.
Fun linguistics fact - Božo is a common shortening of the full name Božidar, which is actually two words fused together, translating to "God's gift". Then english turns Ž into Z and it becomes a synonym for clown
"Prdanovack"? Probably PRODANOVIĆ. i get more worked up with age... my english is decent, and a lot of it is ... DECENCY. So be decent in return. It is not so hard. PRO DA NO -VIĆ. Vić is not "vick". It is a Soft "CH". Examples of it can be found all over the internet, and i am confident that any english speaker can say it, as i can speak english just fine ( unfortunately with a US accent, but what can you do...), yet even a hard CH would be better than CK. like when you pronounce Russian surrnames.
Great chordal resolve to another great video. I appreciate anyone's efforts to do all the fiddly work. I'm one of those people who puts in the extra fiddly effort, but in another profession.
I’m gonna start my second guitar soon, built the first maybe 2 years ago. Your videos really help. Just fine tuned the intonation yesterday thanks to your guidance. And just wanna say I appreciate your videos. Thanks
I always love watching a master craftsman work. Having done a bit of amateur repair work myself, I recognize that it takes years of experience to attain this level of expertise.
Great work. Very clean sound & projection. Actually, enjoyed the resharpening on all the edges used for making gun muzzleloading gun stocks. It was fun while it lasted. enjoy your channel. Cheers
Ted, thank you for the information and the courage to repair,build and maintain instruments. I have opened a music store in Northern California and I’m working on amazing guitars with confidence . I have been a finish carpenter for a long time, without that basic knowledge of finish carpenter craftsmanship I would not be able to do what I do. But in combination with Twoodfrd and life experience anything is possible. Thank you again my friend. Hope to talk and meet you one day, intel rocknroll..
Could you please show in a future video more detail of creating new saddles and the process of setting up the intonation for an acoustic like this? Thank you so much!
That truss rod and neck pocket issue is exactly why I am a bit worried about the 70s Yamaha 12 string I have that needs a reset. Those guitars are notorious for weird neck joints. I LOVE Japanese water stones for sharpening. I also keep a small plate of plastic with some 600 grit wet/dry sandpaper and a leather strop on my bench for quick sharpening while I work.
Thanks for sharing your sharpening method. I bought Leonard's book when it was first published. I've been using the Lee Valley water stones and the stone pond since the early to mid-90s.
I really appreciate you sharpening a chisel properly. I cringe when people bevel the back of a chisel.. and the professional tutorial about sharp enough.. 😎 Btw- when building 12,000’ homes in Rancho Santa Fe, Kalifornia- with open beam ceilings- I would sharpen my chisel 12-15 times a day.
I had a Bozo 7 string. The first O in Bozo had a tuning machine mounted over the center of the O. It held an octave course tuning peg for the G string octave up string. The guitar was not quite as adorned with fancy purfling, and pearl as other Bozos, but it was still pretty pretty fancy looking. It played very well and sounded great.
Hit it with a claw hammer, like Blues Creek Guitars!! When I saw him do that, I was flabbergasted! Hitting the neck with a hammer is one thing, but doing so with a claw hammer without a piece of sacrificial wood, or even a rawhide hammer??? Crazy!
In the 60's I was trying to build my first guitar and was trying to find where I could buy some binding strips. I looked for guitar builders in the phone book, no internet back then, and I found Bozos name and his shop location in downtown Chicago. I visited his shop and told him I was building a guitar and needed some binding strips, but I don't know if I was interrupting his guitar building, or he didn't need to spend his time on a teenager who wasn't there to buy a guitar, but I left his shop empty handed. Then my father, who was a salesman, visited his shop, and although he also didn't leave with any binding or place to buy some, Bozo gave him a tour of his shop and showed him a guitar he had just finished for an artist who would be playing it on TV. My dad insists that soon after that he saw a guitarist on the Tonight Show playing the same guitar.
Great video and demo, I appreciate the info…. Trying to decide if it’s worth resetting the neck on my acoustic, what is the rough cost for your efforts on something like this?
I'm pretty dull, sadly I don't think watching a video on knife sharpening will do much to make me any sharper lol. I do however look forward to your videos Ted.
Thank you so much for sharing your repair videos! I have an old German parlor guitar, it’s neck has a propeller-twist to it. How would you address such a problem? Thank you!
When a new video arrives, I crank your opening music so my wife can hear and she smiles because she knows how much I enjoy them. Thank you, sir!
Lucky winner 🏆 🎉
I love that you recogniozed the maker's experience as a repairman and that the truss rod nut, once removed allowed the rod to clear the soundboard. It's that little stuff that makes a world of difference. If not planned, what is litte, when not done properly, becomes very big down the road.
They just did that to get the rod in originally. Nothing to do with fixing it later.
I swear those neck resets are some wizardry shit
“🤘🤘REACH OUT 🤘”🤘
Sorcery 🎉😮
I would never attempt a task like this on my own, but the information is good to know! Also a joy to watch an artist
at his work. Thanks, Ted!
I wonder if the non-comment watching, self described curmudgeon, will acknowledge his silver playbutton. It may sound like I am complaining, but i am not. Ted amuses me because he experiences incremental success but it always happens even though he only produces videos and tells his fans that he will never read their comments. Its fascinating really. I love this channel and am happy for the guy
Lucky winner 🏆 🎉
I used to watch Normulus Abramsii on Sunday but Theodorus Woodfordus is basically my Sunday woodworking programming anymore. Great show.
If yer in the gang tho you can prolly call him Ted. And also. I knew there was gonna be polishing.
The guy who created Nova Anglia Opus Tabernam has been posting episodes to TH-cam so technically you can watch both
@@duckrutt I noticed they digitized and rereleased. Teds got fresh stuff tho. I do watch both I guess haha. The western tradition and lord of Bob Ross too. PBS is great.
@@duckrutt oh no I’ve been watching the New Yankee Workshop Channel. I wonder if Ted ever got that in Canuckistan….
@@kkupsky6321yup. Via PBS Buffalo
The videos are always entertaining and very informative. I was gently coerced into teaching an instrument repair course with only a short luthier training with a Spanish guitar maker to my credit. You give me the confidence I needed to do this. You have my deeply felt gratitude.
Just came in from cleaning up a bunch of brush and leaves in the beautiful brisk fall weather, and I see a Ted upload notification. Its a good day!
I don't know where you live but here in New England a brisk fall day usually means lots of ticks. Check yourself over carefully and throw your clothes in the wash, or at least in the clothes dryer, to dislodge and kill the little buggers; then you can out in your pajamas and watch Ted work! (I live less than an hour away from Ground Zero for Lyme disease and so you can never be too careful! )
Lucky winner 🏆
Best way to spend the Sunday afternoon at work. As always thank you Ted for sharing you’re knowledge!
he's what ?!
I’ve been watching your videos for a few weeks and I’m constantly learning new stuff.
Sure wish these were longer. We're lucky to get what we do get. Thanks uncle Ted.
Lucky winner 🏆 🎉
Ted videos were made for a nice cool fall day, when the leaves are changing and there’s a warm soup on the stove.
My absolute favorite channel on TH-cam.. Thanks Ted!
Lucky winner
I'm not sure how long I've been watching your channel - but it is measured in years. I still learn new things. Thanks!
Lucky winner 🏆 🎉
I have found, through the years; that it is easier to keep a tool (or knife) sharp, than it is to get it that way the first time. I think doing so also adds to its longevity. I have a translucent Arkansas stone that is so fine, it feels like a piece of cold glass. Nice work with the chisel.
Very cool. I really appreciated your discussion on sharpening your tools.
Unfortunately, I’m 61 years old and try, though I might, I’ve never learned the art of putting a razors edge back on a dulled knife or chisel. Frustrating.
Well, as long as we are alive, there's still time
Lucky winner 🏆
I really love watching you work. It's so clear that you really love what you do. I just hope that when I finally take my LP Studio in for a setup that the luthier near me cares as much about his/her work as you do.
Fascinating... It truly has wonderful overtones. The choices of woods have served the guitars voice in a very delightful way.
Balkanian luthiers’re very experienced crafters. With attitude
Does anyone else just feel grateful to be alive after watching a Teddy video( even if there isn't a lot of polishing)? Think about it. Pensez-y.
Lucky winner 🏆
Awesome. That forgotten truss rod nut at the end is a metaphor for any guitar projects I do. :p
Polishing shing shing. 😅. Great video and again as always so informativ! Thx Ted ❤
Lucky winner 🏆 🎉
I have been watching these neck resets and am no longer terrified of them, not that I’d try one myself, but I think I could trust one to someone. For sure I find these luthier vids relaxing
20:15. Loved the reference to Cusco and Sacsayhuamán in comparison to a guitar repair.
Ted you never cease to amaze me
Thanks for sharing your sharpening system, Ted. I know there's a lot of videos and resources for learning about sharpening, but you're right that it's been fetishised. As with a bunch of woodworking and luthiery, though, what's good enough for Ted, it's more than good enough for me :-)
I love the way that one sounds. Nice work Ted.
“🤘🤘REACH OUT 🤘”🤘
Great sound out of it. Excellent job as always, Ted.
Lucky winner
Apart from being the 100th comment - There is a technical precision to note with this channel, without it being too technically obscure. Excellent video!
For Ted, another successful work. For us, another piece of art has been restored by the hands of the master luthier artist. Another amazing video! ❤
Get in touch🤘
I'm always impressed with Ted's scalpel work - Often enough my use will track off the line and create a deep scratch - my solution to this is to use the back of a number 11 exacto blade - to create the initial scoring mark and I follow with the blade - works every time but I've yet to trust myself again to just use the sharp side.
Fantastic information and history. I recently acquired a Bill DeLap classical. He only made 9 of them in the 80’s. Talked with Bill over the phone for more than an hour, two weeks ago. Bill built custom electrics for Allan Holdsworth as most may know. Still builds guitars in Monterey CA. But, like his business card states, “You get what you wait for”. 😊 Takes some time to get one of his amazing works of art.
Lucky winner
Every Word I hear does present 30 years of Experience!!! Comforting to see the Ears as well as the Eyes!!! Well Done😊
These videos make my Monday morning lunch hours so nice and chill
Sharpal 126n. I cook for a living, used to use wet stones from Japan. Now I use this. Never loses its shape. It’s heavy and the box holds it in place.
Get in touch🤘
Just getting back to my home garage after a test drive on my Mustang. It has new rear control arms, adjustable upper and lowers and sorta like Ted is doing here, a bunch of measuring and adjustments. Snagged my wife and myself a nice Latte from the local coffee shop, checked my notifications on the iPad on my workbench and boom! A perfect video to enjoy my coffee to 👍. Next is wash the car up and I’m ready for the drag strip next weekend. Life is good. Twodfrd is a contributing factor.
I do have a co-workers Sears Teisco SilverTone model 319 on my bench. It’s been in the attic for years, it’s a 1960’s model, really decent shape and more importantly complete. It still has a strap on it, hardened with age, probably the origin one it was sold with. Should be a fun project! Lookin forward to starting that this week.
Why do you make a post so much about you? Not classy.
@@unknown-ub9rz - I saw a couple of other post like this, just copying I guess. Ted is a busy guy and I don’t think he spends much time reading comments. I’m really just posting to satisfy the algorithm. Once I posted the word “comment”…got static for that. The internet is a funny place, somebody always has a gripe of some sort.
Easy tiger, the guy is just sharing his about his car and a beautiful day. Reading about taking the missus out for a latte is a nice break from the usual. Good luck with that Teisco, attic finds are rare and great.
The Halloween ref is much appreciated, Ted.
Thanks for another fascinating video.
I've enjoyed, and learned from Paul Seller's videos on sharpening planes and chisels.
Love the new polishing shh shh shh. Just in time for Halloween. Always look forward to your videos. Thanks for sharing 😎
Excellent sharpening Ted Talk mid-video! Great video as always thanks Ted 😊
“🤘🤘REACH OUT 🤘”🤘
beautiful tone on that one. I reallly like it. Nice work, as usual
I can't tell you how much I look forward to your next videos...always so fascinating and enlightening! Suggestion.... you need to sell a T shirt that shows a fretboard and says, "polishing...polishing...polishing"... I would buy one!
Get in touch🤘
Cool history lesson as well as a technical one. Thanks for another great vid.
I enjoyed this video. Thank you for your time making it. The tip re taking the lacquer step down to prevent rounding the heel was a good one.
Interesting guitar. I enjoyed the history on Bozo, as a Leo Kottke fan. Kottke played Bozos I believe at some point. Your talk got me remembering an old catalog I used to get in the mid-70's from a place called "Guitar's Friend". Hand lettered, with a sort of sepia toned hippie aesthetic, these were works of art, and they sold only the best acoustics, often smaller builders. I remember Gurians, Gianninis (the Craviola!), Mossmans, etc. Wish I'd kept those catalogs...
I once owned a Bozo 12 string back in 1970...it was a BEAST and beautifully appointed. Like many of my guitars I had to let it go for various reason$😒. Now own a Taylor 910ce. I would love to see you work with a Taylor new neck design. Love your videos. Keep on truck"n my man.
I think Leo Kottke had a Bozo 12-string, earlier in his career.
the taylor reset would almost be boring by comparison, the neck angle can be corrected by a mechanically inclined guitar salesman with a screwdriver
Lucky winner
Love that I Always pickup something new from a Twoodfrd neck set session. That ridge of lacquer, where the neck meets the side, did in fact cause a heel to become rounded over. I dwasnt sure of the cause or prevention until now. Thank you for an another awesome video.
Man, that box ROCKS. Such jangle and chime!
Lucky winner
Your respectful approach to the traditions of repair can be applied to any walk of life. I believe the original maker is smiling above knowing his instrument found your capable hands.
Leonard Lee! Thank you, Mr. Lee.
That acoustic sounds fantastic, as always very nice work as well Ted 🤙
Fun linguistics fact - Božo is a common shortening of the full name Božidar, which is actually two words fused together, translating to "God's gift". Then english turns Ž into Z and it becomes a synonym for clown
"Prdanovack"?
Probably PRODANOVIĆ.
i get more worked up with age... my english is decent, and a lot of it is ... DECENCY.
So be decent in return.
It is not so hard. PRO DA NO -VIĆ. Vić is not "vick". It is a Soft "CH". Examples of it can be found all over the internet, and i am confident that any english speaker can say it, as i can speak english just fine ( unfortunately with a US accent, but what can you do...), yet even a hard CH would be better than CK. like when you pronounce Russian surrnames.
" God's gift, a clown",
Great chordal resolve to another great video. I appreciate anyone's efforts to do all the fiddly work. I'm one of those people who puts in the extra fiddly effort, but in another profession.
“🤘🤘REACH OUT 🤘”🤘
I’m gonna start my second guitar soon, built the first maybe 2 years ago. Your videos really help. Just fine tuned the intonation yesterday thanks to your guidance. And just wanna say I appreciate your videos. Thanks
The longer this guy does this- the more he sounds like Werner Herzog
Sunday night staple, your time zone may vary. "You might not get the precisely aligned bevels of Sacsayhuamán". Charlie what now? Never change, Ted.
Lucky winner 🏆
What a sweet guitar! Restored with a reverent attention to detail. So your craft is as usual but what a special instrument.
Ah, my Sunday is not complete without your vids
Lucky winner 🏆
What a great sounding instrument! Amazing work as always.
Truly inspiring videos! I love every episode and look forward to seeing them!
Lucky winner
I always love watching a master craftsman work. Having done a bit of amateur repair work myself, I recognize that it takes years of experience to attain this level of expertise.
Get in touch🤘
Great work. Very clean sound & projection. Actually, enjoyed the resharpening on all the edges used for making gun muzzleloading gun stocks. It was fun while it lasted. enjoy your channel.
Cheers
Lucky winner 🏆 🎉
What a neat guitar, it seems to have responded well to the love you have givin it.
Lucky winner
great video; good information that is well stated. easy to watch and learn from. thank you!!!!
You made that guitar sound good! I wasn't expecting it to have such a full sound. Good work, Ted!
Wonderful work on a very nice guitar. And what a great sound it has!
Ted, thank you for the information and the courage to repair,build and maintain instruments. I have opened a music store in Northern California and I’m working on amazing guitars with confidence . I have been a finish carpenter for a long time, without that basic knowledge of finish carpenter craftsmanship I would not be able to do what I do. But in combination with Twoodfrd and life experience anything is possible. Thank you again my friend. Hope to talk and meet you one day, intel rocknroll..
Another great one! Thank you. "Militate" against, not "mitigate."
Could you please show in a future video more detail of creating new saddles and the process of setting up the intonation for an acoustic like this? Thank you so much!
Wonderful episode again!
Lucky winner
Another one for the books. Amazing!
I love Mirka sandpaper and the little bulldog logo.
Get in touch🤘
That truss rod and neck pocket issue is exactly why I am a bit worried about the 70s Yamaha 12 string I have that needs a reset. Those guitars are notorious for weird neck joints.
I LOVE Japanese water stones for sharpening. I also keep a small plate of plastic with some 600 grit wet/dry sandpaper and a leather strop on my bench for quick sharpening while I work.
I love the attention to detail. It is VERY helpful to us novices. 😊
“🤘🤘REACH OUT 🤘”🤘
Thanks for sharing your sharpening method. I bought Leonard's book when it was first published. I've been using the Lee Valley water stones and the stone pond since the early to mid-90s.
Lucky winner 🏆
A beautiful sounding and unique guitar.
That’s one of the nicest dovetails I have seen
Thank you for taking the timeand sharing , you are appreciated
I would be happy to own and play an instrument like this. It seems to be well made and I think it sounds very good.
Lucky winner 🏆
I really appreciate you sharpening a chisel properly.
I cringe when people bevel the back of a chisel..
and the professional tutorial about sharp enough.. 😎
Btw- when building 12,000’ homes in Rancho Santa Fe, Kalifornia- with open beam ceilings- I would sharpen my chisel 12-15 times a day.
Lucky winner 🏆
Really lovely sound!
I had a Bozo 7 string. The first O in Bozo had a tuning machine mounted over the center of the O. It held an octave course tuning peg for the G string octave up string. The guitar was not quite as adorned with fancy purfling, and pearl as other Bozos, but it was still pretty pretty fancy looking. It played very well and sounded great.
What a great sounding guitar! ❤
Hit it with a claw hammer, like Blues Creek Guitars!! When I saw him do that, I was flabbergasted! Hitting the neck with a hammer is one thing, but doing so with a claw hammer without a piece of sacrificial wood, or even a rawhide hammer??? Crazy!
It was a nice sounding Guitar👍.
I’d love to go see Sacsayhuaman in person.
Thanks for another great video, Uncle Ted.
Lucky winner 🏆 🎉
Beautiful job on a beautiful instrument
“🤘🤘REACH OUT 🤘”🤘
In the 60's I was trying to build my first guitar and was trying to find where I could buy some binding strips. I looked for guitar builders in the phone book, no internet back then, and I found Bozos name and his shop location in downtown Chicago. I visited his shop and told him I was building a guitar and needed some binding strips, but I don't know if I was interrupting his guitar building, or he didn't need to spend his time on a teenager who wasn't there to buy a guitar, but I left his shop empty handed. Then my father, who was a salesman, visited his shop, and although he also didn't leave with any binding or place to buy some, Bozo gave him a tour of his shop and showed him a guitar he had just finished for an artist who would be playing it on TV. My dad insists that soon after that he saw a guitarist on the Tonight Show playing the same guitar.
Leo Kottkei used to play a Bozo guitar or rwo; I don't remember if it was a 6 or a 12 string, or one of each.
Lucky winner 🏆
I love the batwing/mustache bridge!
“🤘🤘REACH OUT 🤘”🤘.
Great video and demo, I appreciate the info…. Trying to decide if it’s worth resetting the neck on my acoustic, what is the rough cost for your efforts on something like this?
Thank you Ted 👍👍👍🎸🎥🎬❤
“🤘🤘REACH OUT 🤘”🤘
I'm pretty dull, sadly I don't think watching a video on knife sharpening will do much to make me any sharper lol.
I do however look forward to your videos Ted.
Lucky winner 🏆 🎉
Thank you so much for sharing your repair videos!
I have an old German parlor guitar, it’s neck has a propeller-twist to it.
How would you address such a problem?
Thank you!
That bridge is such a Lord Kirchner mustache… I wanna twirl it’s ends…
New video! Love your stuff, man.
Lucky winner 🏆
Leo Kottke used to play a Bozo guitar or two; I seem to remember he had a Bozo 12-string.
Lucky winner
I like the “polishing shh shh shh polishing shh shh shh polishing shh shh shh”… a new twist on an old favourite.
Lucky winner
I enjoy your jams at the end …can we have some at the beginning prior any work ?
You do so good work!