How to fix broken lift gate | Will not open remotely|Nissan Armada

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ต.ค. 2024
  • The back gate would only be manually open, not automatically. Check out how I found the issue and solved it without calling a mechanic which enabled me to save money for myself.
    Please watch the entire video
    Like | Share| Subscribe
    Leave a comment, I want to hear what you are thinking.
    Affiliates:
    My Favorite Book - Kindle Edition
    amzn.to/4dvGGol - Don't Let Your Problem Keep You Down: God has a creative plan for you
    Affiliates:
    Car Air Fresheners - amzn.to/3ttdega
    Jump Starter Cable - amzn.to/3LYyWz6
    Portable Jump Starter -amzn.to/3FeeupZ
    Thank you

ความคิดเห็น • 15

  • @davemoss7537
    @davemoss7537 8 หลายเดือนก่อน +1

    2010 qx 56 problem fixed because rear window on gate wasn't completely closed. I opened the window up and reclosed and it fixed the gate problem.

  • @bagwindydiyauto
    @bagwindydiyauto  ปีที่แล้ว +3

    Leave us a comment

  • @Annie-px5ni
    @Annie-px5ni ปีที่แล้ว +1

    Where did you get appropriate bolt?

    • @bagwindydiyauto
      @bagwindydiyauto  ปีที่แล้ว +1

      That is a special bolt that can be purchased at your local Nissan Dealer, but try searching for it first. Most likely it has fallen and is hidden down inside the lower interior.

  • @deloresarce7441
    @deloresarce7441 ปีที่แล้ว +1

    I have a 2012 equinox..I had interior lift gate switch replace ..it open for a while but fail to work again ..what can the problem be

    • @bagwindydiyauto
      @bagwindydiyauto  ปีที่แล้ว +1

      I would first check the fuse box for an open circuit. If fuse is good, check for power at the lift gate motor while regulating switch in open or closed position. If power is at your motor in either position open or closed, that’s an indication that your switch is good. If there is no power at your motor that is an indication that your switch could be bad or there could also be an open circuit between your switch and your motor. Also, check for proper ground at your lift gate motor.

    • @bagwindydiyauto
      @bagwindydiyauto  ปีที่แล้ว +1

      It is also a possibility that your lift gate motor is disconnected between the motor and the internal mechanism assembly.

    • @bagwindydiyauto
      @bagwindydiyauto  ปีที่แล้ว +1

      PS. Also your lift gate motor relay could be sticking or stuck in the open position. Hopefully these tips help.

    • @deloresarce7441
      @deloresarce7441 ปีที่แล้ว

      It was the lift gate switch..thank you

    • @bagwindydiyauto
      @bagwindydiyauto  ปีที่แล้ว

      Great!! Thank you .

  • @jillybeandurham207
    @jillybeandurham207 ปีที่แล้ว +2

    My lift gate will not work with any of the switches or manually

    • @bagwindydiyauto
      @bagwindydiyauto  ปีที่แล้ว +1

      I would start with the minor repairs by checking all my fuses.

    • @Humboldtcounty707
      @Humboldtcounty707 หลายเดือนก่อน

      ​@bagwindydiyauto tr6 disconnecting the switch on the back. Once I did that the remote and dash buttons started working again

    • @Yesthatsmyfirstname
      @Yesthatsmyfirstname 21 วันที่ผ่านมา

      @@Humboldtcounty707 what switch do you mean. like the one there by the motor and actuator? My liftgate wont work with anything either, it's like it has no power but all the fuses are fine. I have to open the hatch glass and reach in to pull the manual lever behind the panel there it open it. So annoying