Nice looking timber, are they pre primed painted pine, hard to tell in the video. In the good old days we used liquid damproof added to the mortar, it seemed to work fine so long as the mortar was a stronger mix of about 4:1. These days though they insist on a membrane whether it be plastic or bitumen strip. But still use the liquid damproof in some non technical applications like retaining walls or parging on the back of retaining wall.
Work looks good. I cant believe code allows for use of 4 inch block. Are the joists that are sitting on the block just sitting there ? Not tied in yet ? What ties those into the block?
Always love to see timbers going in. What hole size did you drill for the resin anchors? I always like the idea of drilling at least 4mm bigger hole than the bolt so I know I'm getting a good amount of resin around the anchor. Did you make sure to brush and blow out the holes, dust isn't going to create a good bond for the resin otherwise!
Looks good mate, how comes the joists aren't pressure treated? Plastic DPCs I suppose you could SBR slurry then under and over but we are bricklayers, get it up and get some weight on them 😁😁👍
Hi Mark, making good progress there. How did you ensure the new joists are the same height as the existing? Or is there no access between the old and new at 1st floor level?
Hi matt. On this one floor hights are different levels and don't match. So we just had to go with the plans. Think it's because it's having a loft room to get the hight. So the new floor is lower 👍👍👍
@@markhep Don't see the point either but find it strange that some building inspectors insist on it and others don't? Then again.... What do we know.. We only build houses for a living lol.
@@shaunhennessy603 😂you right there mate. I stopped doing it when I had one inspector saying what you wrapped them for it makes then sweat. Then I never did it again. I sopose we just do as we told. we just need the pass lol😂👍👍👍
Well done Mark got loads done there cutting the pockets out and all the joists up every thing coming in to place !
Cheers John. Will be good when we get the boards on something to work off 👍👍👍
The job looks spot on. Great work guys 👍👍👍
Chears mate 👍👍👍👍
Omg mark how lucky was you 😳need you get SDS with a clutch, great job 👏
Yere nearly lost a tooth lol. The other one I have. has a clutch on. I borrowed this one lol👍👍👍
You have a certain talent for staring at rebel drillers who refuse to make holes 😁👍
😂😂😂👍👍👌
Nice looking timber, are they pre primed painted pine, hard to tell in the video. In the good old days we used liquid damproof added to the mortar, it seemed to work fine so long as the mortar was a stronger mix of about 4:1. These days though they insist on a membrane whether it be plastic or bitumen strip. But still use the liquid damproof in some non technical applications like retaining walls or parging on the back of retaining wall.
Hi mate. Yere the pritty straight too. They not treated with anything. They don't bother over hear. Unless it's a old house with damp problems 👍👍👍
Cracking job there mark.
Really coming on now isn’t it.
Chears Billy. Yere going up now mate. Should be good when we get some boards on to stand on 👍👍👍
Work looks good. I cant believe code allows for use of 4 inch block. Are the joists that are sitting on the block just sitting there ? Not tied in yet ? What ties those into the block?
Cheers mate .yes they get built into the walls there was another story going on top so they got built in 👍👍👍
Great work Mark
⭐️⭐️⭐️⭐️⭐️
Thanks alot geoff👍👍👍
Always love to see timbers going in. What hole size did you drill for the resin anchors? I always like the idea of drilling at least 4mm bigger hole than the bolt so I know I'm getting a good amount of resin around the anchor. Did you make sure to brush and blow out the holes, dust isn't going to create a good bond for the resin otherwise!
Yere I always try to make them a little bigger nothing worse than hammering them in and messing up the thread 👍👍👍
Looks good mate, how comes the joists aren't pressure treated? Plastic DPCs I suppose you could SBR slurry then under and over but we are bricklayers, get it up and get some weight on them 😁😁👍
Hi mate. They don't need to be. I would put dpc and treated joists in a old house. But you don't need to. 👍👍👍
@@markhep 👍
You've done well there 😊 ...are they letting you carry on??? 🤠🐎😂🤣😇🤟
😂😂Yere all good lol
Great work
Chears pat 👍👍👍
Fair old lumps them Mark 💪🏽, you just take it on the chin ….. literally 🤣🤣🧱👍🏼
😂😂😂I like that one steve 😂😂👍👍👍😉
@@markhep 😏😆🧱👍🏽
Hi Mark, making good progress there. How did you ensure the new joists are the same height as the existing? Or is there no access between the old and new at 1st floor level?
Hi matt. On this one floor hights are different levels and don't match. So we just had to go with the plans. Think it's because it's having a loft room to get the hight. So the new floor is lower 👍👍👍
@@markhep gotcha. thanks.
Aren't you supposed to blow those holes out before the resin?
Hi mate we used the ones that don't need resin in this one .but yes definitely better with clean holes 👍👍👍
@@markhepBrill 👍
Does your building inspector ask you to wrap the joist ends with dpc?
Hi shaun. I never get asked to wrap them. But I know a few builders that do. But I don't sew the need unless it says use dpc then I would 👍👍👍
@@markhep
Don't see the point either but find it strange that some building inspectors insist on it and others don't?
Then again.... What do we know.. We only build houses for a living lol.
@@shaunhennessy603 😂you right there mate. I stopped doing it when I had one inspector saying what you wrapped them for it makes then sweat. Then I never did it again. I sopose we just do as we told. we just need the pass lol😂👍👍👍
@@markhep
Makes you wonder.. How much of what they ask us to do is actually building regs and how much is personal opinion.?
👍👍👍
You not rapping damp round them
Bad idea wrapping damp around joists can't believe people do it.
Hi Jo I never bother. I one did it and the inspector said why you bothered rapping it. So don't do it now unless someone says 👍👍👍
Nice work coming along nice mark.shame about the wall but it happens dont it until the weight goes on its vulnerable 👍🧱🧱
Chears Justin. Yere I dont no why they design them like that pain in the arse 😂😂😂👍👍👍
👍🧱