Funnily enough I just watched the previous fantasy sword ratings video 2 days ago, and replied on the comments there that they should rate Imperius, even if it probably doesn't quite qualify as 'pop culture.' Not yet anyway. It's probably coincidence because by that time they must've already shot this, but I still found it amusing. It's not much of a plug since the two LARP swords in the back were already in our face begging to be included.
@@Kaeldorn It’s too bad that they’re selling for $200+ (US) for the cosplay versions of Imperius. I was actually interested in purchasing one, but I can get real steel swords for less than that. 🤣
To be fair on Shad the entire design of that sword was fantasy and magic from the start and Shad has never claimed it to be a practical design for a real sword.
He didn't even mention that without the magic that makes imperious what it is, it's literally just a wooden sword with an edge, by his own established canon, checkmate Shad.
The Buster Sword is shown in-universe to be unweildable by anyone not a mako-infused super-soldier, so 1 is probably fair. I know there'll be demands for Sephiroth's sword, but I'd personally love to see you analyse Cloud's combi-sword from Advent Children. Fully combined, it's likely heavier than the Buster sword, but with a lot of potential points of failure, however the individual swords would likely be wide-spread in ratings.
Everything about the buster sword, all of it's variants, abilities, etc. really come down to the user needing to be incredibly strong - and magical. Dual swords can be useful, and we see them being useful in Advent Children - but that just takes an incredible amount of strength to wield two, big swords like that. And the fact that he can swing the full thing like it weighs nothing is most of the power the sword has - it's even about the sword, really. Then, having way too many swords is only useful if you have a magical attack that lets you levitate them and shoot them at your opponent, or if you can fly around and grab them as you need, leaving them around strategically.
Of all the things from Legacy of Kain, there's a few things you'll always remember from the series. Kain (and his voice actor Simon Templeman), Soul Reaver sword and.... "Hey Victor... I mean Vae Victus!"
@@cocodojo I remember the beginning of Soul Reaver 2 vividly, because I had to keep restarting it. I would always get trapped inside the Dark Forge because I liked scaring away all the birds before I went inside...
Rebellion would likely be a 1 at most: it's *huge*. Yamato, however, is just a long katana. Not sure if it's long enough to be deducted much, but could range 8 - 10.
I would literally pay money to see you guys do an episode on fan-made sword concepts sent to you by fans...and not just because I have my own that I would love your opinion on.
Most of them are perfectly fine type XVIIIb and XXa, appart from some of them having a wonky pommel (and a very few having weird blade shape) there wouldn't be that much to say, 90% of the swords in the game would be just "it's a longsword, it works".
@@dearcastiel4667 It would be a bit pointless as they are just longswords with unusual sheaths, grips & decoration. as you stated 90% reality-history with 10% fantasy give or take.
Problem with the Witcher swords is none of them are all that iconic. None have a significant enough design or silhouette to stand out. Most don't have any story significance either, and those that kind of do (like Aerondight and Iris) only have a miniscule importance at best. In the end, all the Witcher swords just kind of blend in with one another; there's not a Sting, Dragon Slayer, or Master Sword among them that sticks out in anyone's mind. The Witcher might have a place in pop culture, but the swords absolutely do not.
Here are some of my ideas for the next episode of this series: 1. The Emperor's Sword (Warhammer 40000) 2. The Lion Sword (Warhammer 40000) 3. Squall's Gunblade, Revolver (Final Fantasy 8) 4. Seifer's Gunblade, Hyperion (Final Fantasy 8) 5. Blaze Edge/Blazefire Saber, Lightning's Gunblade (Final Fantasy 13) 6. Yamato (Devil May Cry) 7. Rebellion (Devil May Cry) 8. Kanshou & Bakuya (Fate/Stay Night) 9. Arondight (Fate/Zero) 10. Saba, White Ranger's Sword (Mighty Morphin Power Rangers) 11. Raiden's First High Frequency Blade (Metal Gear Rising) 12. Future Trunk's Sword (Dragon Ball Z) 13. Kadaj's Souba (Final Fantasy 7 Advent Children) 14. Genesis Rhapsodos' Rapier (Final Fantasy 7 Crisis Core) 15. Brotherhood (Final Fantasy X)
-The Heron sword from wheel of time -Hiccup's flaming sword from how to train your dragon -Sword of the creator from fire emblem 3 houses Those are my top 3 picks for now.
Chainswords are used by everyone in the Imperium. Orks have their own version with Chain Choppa. The Craftworld Eldar have a sleek variant used by the Striking Scorpions.
you know what my favorite thing about the Striking Scorpions, they are the stealth ambush units, with chainweapons.... nothing says i'm better at sneaking up on you like having a revving chainsword and still being effective.
So fun fact Shad I have a 3d model I have printed for the Soul Reaver. Total length is just about 45 inches. Blade from tip to skull mouth is roughly just under 30 inches. The Handle from pommel to the connector to the skull is 9 and a half. Skull from connector to mouth is 5 and a half to 6 inches based on if you include the fangs or not. The Cross guard is at the widest 12 inches. From the tip of the guard near the mouth to the back of the guard near the handle is 7 inches. The guard thickness is just under an inch it moves in and out so its not constant. I didnt include the blade thickness because its actually thicker then its suppose to be as I needed to adjust to make a 1/2 inch bar go through to act as the Sword's spine. Now its actually a fairly comfortable sword to swing the balance point is the skull just over your hand and the length of the handle makes it a reasonable hand and a half sword I dont find issue using it one hand or two handed. Now the Handle IS round for my version but it has a spiral cut into the handle which actually makes it stick in your hand and the edge alignment seems to happen naturally. I think this might be because of the guard they naturally want to align because of that. But all that said it would be VERY easy to make it oval shaped and the spiral to disguise it. And this is the issue I think you guys run into some of these swords are actually better then you realize because you actually havent gotten a chance to use it. Yes looking at it you can spot flaws but when in motion and at play those flaws might actually disappear like how the Blackbird plane when it was on the tarmac was a leaky mess but when in the air at speed it was a sleek Mach 3 bird. So for some of these swords it might be a good idea to mock them up and try them out. You might be surprised how good it works when it actually is being used vs just looking at an image.
I think we need an Excalibur off. Who truly made the best legendary sword? I mean that poor blade has been abused in some of its depictions in the many series it appears. Sword in the stone, Soul eater, Fate, Sword art online and a major whole butt load of other media.
9:50 to be fair, there are real life humans who have specifically trained to be able to wield a "buster sword". it's by no means nimble like a long sword or tachi, but they do demonstrate the capacity to swing and move it around for extended periods of time. also cloud IS a superhuman SOLDIER (literally the name of the super human program) so it's not AS far fetched to say it's been specifically designed to be wielded by a SOLDIER. for your average person though 100% virtually useless as a combat weapon. EDIT: I found one! Named gameofharmony and I undersold him. he is genuinely training in buster sword swordsmanship and it's f**king terrifying. www.youtube.com/@gameofharmony/featured EDIT2: He uses sword combos with a 17 lbs Buster Sword and a 20 lbs dragon slayer to workout, not actually fight. still terrifying af
As a former lumberjack, I 100% agree with the low rating of the chainsaw sword. Those things will get dull in *literally* one second if you accidentally touch the forest floor with them while you're sawing. Dirt contains sand and rocks, which dull the teeth way faster than you'd think. And they're heavy. However, they'd be great if your enemies were super slow and not wearing armor.
Some magic sci-fi metal takes care of both problems; it's super durable and light enough to swing around. The bigger problem is their visual depiction: the teeth are only half the width of the "blade" Game's Workshop's artists had _never seen a chainsaw_ back in the 80s when they made the original designs.
As a former lumberjack you should have realized that chain sword is absolutely nothing like a chainsaw. It is more like a trenching machine with thick hooks for tearing through hard dirt and rock.
One of the worst issues I see with the WH40K chain swords is that rest of the blade is wider than the chain part. It's just going to stop as soon as it's deep enough for the sides to hit.
so interesting thing about the soul reaver, while I do respect the fact that yeah round handles are kinda bad, it actually makes a -little- sense if you take into account that the sword in question was never meant to be used by a human. It was meant to be used by a vampire, specifically an ancient vampire, who all have hands which consist of two forward talons and one 'thumb' talon which, when closed, actually end up being much rounder than a human hand and thus ergonomically one could explain why the handle is a lot rounder to account for this. That said, still makes edge alignment a nightmare.
Last time, when you did Skyrim swords, you forgot the Daedric artifact, Dawnbreaker. If you do not mind, please cover that when you get a chance. It’s a personal favorite. There’s also the delightful selection Elden Ring (+DLC) has on offer.
Loving this series. I would sugest rating more 'realistic' swords next, like Uhtred's sword from The Last Kingdom, Achilles's sword from Troy, the swords from Gladiator, Kingdom of Heaven, etc.
Sorry Shad, I would give Imperius a 2 at BEST because of how thin its blade is. If it had all its magical properties I would give it an 8. A 9 if the blade wasn't so wide.
And if it weren't so thin as to sheer itself apart in the swing, it would be so blade-heavy as to be a bit of a wrist-breaker. It's like a rapier with a triple-wide blade. Not to mention how much that Tang would be a critical point of failure under impact stress. I would never want to wield it if my life were on the line.
So, unrelated, but regarding Imperius, it is used one way because of the hand guard ; how would one use the secondary blade ? Why have a blade on that side at all ?
The thing about that chainsword is that it isn't built like a chainsaw at all. It is built like a trenching machine. Trenching machines also use a chain, but instead of little blades for cutting wood, they have thick hooks for tearing and digging through hard dirt and rocks. It kinda doesn't matter if they get dull because they aren't cutting in the first place. They are ripping and mangling. That being said, you couldn't possibly use it in real life. You would need incredible strength to prevent it pulling itself out of your grip. It's also enormous and heavy.
but if this gets stuck in you, there would br ABSOLUTELY no way to stick it off, and yet shad thinks it's possible. If someone created a functional, shrunken prototype for a battlefield, its main purpose would be to terrify an enemy with it's messiness and untreatable wounds it would leave if someone SOMEHOW managed to survive such a strike.
@@latawieclatajacy9053 I think the sword was designed to tear through the insanely resistant armour present in the setting, any normal current day weapon would not be able to even dent the armours (even the biological ones) in wh40k. People make fun of lasguns, but they are better than anything present today as infantry weapons.
A few things to note about the buster sword, while it's obviously awful, it's more designed to take down monsters and non-sword wielding foes due to the jobs of SOLDIERs. Additionally, as you show, the wide blade doubles as a more defensive device. Still terrible, but it has reasons to exist.
As others have pointed out, even the imperial guard uses chain swords, the thing about warhammer 40k weapons is that there’s so many variations of every weapon, size variations for different types of units and races. I think it’s important to point out that being hit with one would be akin to being hit with a heavy mace, at the very least, and that’s without taking the chainsaw into account. So you could see it as a heavy blunt impact + mechanical cutting/mangling wounding effect. It sort of makes sense in universe, as you could see it possibly being laid onto armor or something and being used to cut through it. Against an unarmored person even in real life I’m sure it would end your day, or your life.
Also chain swords come in all sorts some are Chain, some are reciprocating, some are vibrating. And they all have blades that have blades that have molecular tech cutting.
I remember a mention by Commissar Gaunt where he's recalling a fight and talks about reversing the direction the teeth were moving so it kicks a different way on contact. I found that quite interesting at the time.
While all of that is true, the fact of the matter is that a sword is *designed* for combat with other swords as they said. And if you pit that chain sword against another sword, it isn't going to go well for the chain sword user. It's a cool design, but if you can't be honest with yourself and admit when something isn't realistic and just accept that, then there's no point watching this video.
I'd love to see you get your hands on a prop Qualta Blade from Farscape. The iconic sword/energy rifle wielded by the Luxans. I'd say it has some great qualities that make it a useful weapon.
@@EpicRandomness555 i would like to think it would be a good sword as a trend I am seeing, a the less elaborate a sword is, the better the functionality is.
Guys. Pls just use that popular S-F ranking chart that pretty much everyone uses. Or just use the same chart with a 10-0. Very nice visual to look at. But as always love the videos guys, keep up the good work!
Show version of Dawn was dogcrap, putting a sun on the hilt of a random steel sword was a joke. Where was the magical, milk-white blade forged from a meteor with similar properties to Valyrian Steel (but predates Valyria by around 3000 years) that might actually be "Lightbringer" the sword of Azor Ahai himself, the weapon that defeated the White Walkers 8000 years ago?
Can’t believe already 1,68 Mio subs You deserve it. Am subscribed since don’t know two, three years. Go on and win the world. Still love your work, your way, especially those conditions we face.
If you continue this as a series I'd have a few ideas: Since the lighsaber is already rated, what about Vibroblades? The closest in real life are ultrasonic knives. High-Frequency Blades are basically the same, but from the Metal Gear Franchise. Either Raiden's unnamed sword or Sam's Murasama. And since the Buster Blade was brought up, what about the Muramasa from Sephiroth? Probably the same as a Katana with size advantage/disadvantage. Also, as a Sephiroth cosplayer I can tell you that a sword with that length is surprisingly fast to move. (As long as it's 1.4kg) And if you make a Buster Sword, but adapt it to real life a bit (thinner). You can make an ~7kg sword. Also one minus point for Imperious: If you make one the wrong way around, you can't carry it with your dominant hand. Edit: Also a sword that is way out there: "Battle Cry" from Brütal Legend, worn by Lars Halford
Jade: is completely useless in any context that isn't decoration or maybe buttons on a shirt The jade guard: intentionally designed to look like a love tap with a wooden sword would break it, to the point that it might as well not exist Goddess Sword's cross guard: literally has similar outward dimensions, can actually survive more than one hit, is NOT made of useless material that would shatter on contact with another sword, is surprisingly wieldy aside from the handle being round. Shad: gives a 9 to the one with the useless guard that would literally break on impact with a wooden sword, gives a 3 to Soul Reaver despite having the second most impractical hilt on the entire channel, gives a 2 to a hilt that would actually survive more than one hit AND allow you to move it around reliably... For no other reason than "all one material plus round hilt". The other guy: brings up multiple points of failure with one blade, acts like being made entirely of one material is even worse, also claims that the Master Sword's hilt has a leather wrap when the original depictions also showed it having a hilt that was all one material (also the original depictions of the Master Sword were blue, it wasn't until Twilight Princess and/or Master Quest that it was reconned to be purple).
LOL. They filmed that Masters of the Universe live action movie all around where I used to work in Whittier, CA. Came around the corner one morning and our parking lot was full of spaceships.
Would be interesting to see some of the other Zelda sword designs: the Biggoron sword seems like a pretty standard 2 handed sword, and the Kokiri Sword seems like a pretty decent dirk (or just child sized arming sword, given it's made to be wielded by a Kokiri, who are basically stuck as 10 year olds forever) The Razor Sword would probably be the most interesting to get an analysis of, though, as cool as it looks, I am not expecting a favourable review!
@@Aczie042 Could have sword he did, I even remember them talking about the pommel dragging the score down because it is spikey. EDIT: I think it might have been a Skallagrim video and my brain is mixing the two videos together.
About chainsword. Guys there is something called kickback in chainsaws as well :). Kinetic energy of movement of chain will make it bounce of target unless held down and pressed towards the target with some force.
Soul Reaver's handle looks as if it's made from Chitin, rather than metal. I would definitely dock points for the Highlander katana for having a really uncomfortable handle and pommel. A seven maybe.
As someone who owns an official Marto replica of the Ramirez/Connor katana, even though it's purely a decorative weapon, when I do handle it (when I clean it, I still swing it around a bit just for the fun) as an adult I've come to realize why the hilt is terrible lol. I've had that sword for 26 years now. The movie grip was clearly significantly thinner and had far less protrusions in the decorative carvings, making it much more practical to wield.
Check out Battle Angel Alita's Damascus Blade from the manga. There were originally 2 blades mounted to her forearms, but later she turns one into a giant butterfly sword!
I'd love to see Zar'roc and Brisingr from The Inheritance Cycle/Eragon. You could see the movie version of Zar'roc but fan art/ man at arms for Brisingr
I'm waiting for the Tri-bladed sword as well because that one's going to be all kinds of interesting mess lol. Oh, speaking of all kinds of mess "swords", there's a bunch of oddball ones form that one manga / anime series Blade of the Immortal. It'd be interesting to see how low several of them score since they're mostly impractical outside of very specific / niche applications.
Sword of Acorns from Archie Sonic Comics. Anduril from Lord of the Rings. Inigo Montoya's Rapier from The Princess Bride. Anaklusmos from Percy Jackson Movies. Dragon Buster from The Legend of Dragoon! Achilles' Sword from Troy. Godfrey de Ibelin's Sword from Kingdom of Heaven. Cpt. Jack Sparrow's Sword from Pirates of the Caribbean. If another episode gets made, I could list out more blades in its Comment Section!
You could do an entire series just for Power Rangers/Super Sentai weapons. Some like Lost Galaxy's sabers or Samurai's spin saber are pretty good, others... not so much.
The Green Destiny was definitely a good one. I'd love that perfected Master Sword redesign from the old old video. I know The Sword of the Rivan King from the Belgariad world fail, basically a solid magic meteorite metal sword, oversized and originally wielded by a next best thing to literal giant. And the magic living rock made it so that only one person could pick it up and the live, as well as all setting all the way for the approved wielder. I think it would like to see some swords from some comic books make an appearance. Or maybe some other swords from the Zelda series. It's a shame the Red ranger sword was so chunky.
Witcher Swords, Kai's sword from Ninjago (for the memes), Indigo Montoyas Sword, Sokka's Space sword from Avatar Last Airbender, and the Hook Swords found in Avatar Last Airbender and other anime I can't remember the name.
But how practical would a bookshelf be as a sword? Tyranth wouldn't be able to complain that they've got rounded handles or the geometry or the thickness of the blade....
In defense of the master sword: 1: the "discard" is to protect Links hands when he performs the "fatal blow" 2: the hilt is made of timeshift stones which is lighter than steel. 3: the blade is made of master ore which is lightweight because we can see others beside Link hold it.
Also, they are working off the assumption that the hilt has to be made of steel or brass. .......what about brassor steel plated with flushed rivets. It is historical think to have hilts made of different times of material together, just look at migration era swords. Also, personally, why is the imperious hilt so pointy. TBH, I can imagine grappling techniques were a opponent shove the hilt points into the wielder
@@ShiningDarknes Yeah, for practically, the points of the rear end shouldn't be there, they serve no other purpose than say, ball tips can. I'm assuming the branches the lines and is to have mutiples to catch blades and no with the sun theme on the piece
@@ShiningDarknes I wasn't refuting the utility of the disk, I was refuting that it was in every game. It's not even in the artwork for LttP or its image in the title screen. And OoT lacked it in in-game models as well. The artwork added it. If we want to only count in-game models, it didn't show up until Wind Waker.
I think chainsword duels were depicted in Gaunt's Ghosts. Special techniques are involved when fighting with them whereby the wielder rev and reverse the chain in order to pull or push the opponents weapon in unexpected ways.
I believe the goddess sword also has a shorter balde than the master sword, not by much but noticeable, also looking at other swords from Zelda, especially Breath of the Wild/Tears of the Kingdom would be interesting Edit: in terms of the Master Sword's thickness, there are seemingly 2 designs, one being much thicker, seen in the WindWaker for example, and a thinner, longer one seen in other games like Twilight Princess and seemingly even thinner and longer in Breath of the Wild
Excalibur from the 1981 Excalibur movie. Red Sonja's sword from the 1985 movie. Dar's sword from Beastmaster (1982 movie). The Sword of Troy, from the 2004 Troy movie. Icing Death and Twinkle, Drizzt Do'Urden. OK, it's not a sword, but Chingachgook's gunstock war club from Last of the Mohicans (1992).
They tested the Urumi on Deadliest Warrior (remember that show?), actually. They did some pretty nasty cuts on ballistics gel dummies. Not _damage_ , mind you, just _cuts_ .
Hey Shad I'm writing a fantasy book; I've got a character that wields a greatsword, and after a period of abnormally prosperous work, they're upgrading their sword from enchanted steel to a fantasy aluminum alloy that is slightly more durable and noticeably lighter than steel. They have used this to increase the size of their great sword, while maintaining only slightly increased weight. Would this be a viable change based on material differences?
There's always going to be some of those. Shad's not doing these videos from a strictly sword fighting like they are point of view, but more of a "How practical and / or functional would these really be?" point of view. We've always wondered about it, Shad's just trying to answer what we're curious about in his own way by analyzing it from a curious person's viewpoint.
@@cocodojo I will criticize that a perfectly functional historical sword doesn't get a 10/10 because it's not a longsword essentially. So pretty much all East Asian swords are barred from getting a 10/10. And shorter swords. And single-edged swords. Like criticizing a pistol for now shooting as far as a rifle.
Your reaction to Green Destiny shows you guys need to do a deep dive into Chinese swords, both Jian like the movie sword as well as Dao profile swords. Maybe you guys can get LK Chen to work with you!
If you want a decent attempt at 40k commentary of normal people using chainswords, then I direct you at Guant's Ghosts series. Specifically "First and Only" I believe, I think chapter 28? They show how duels are done between chainswords wielded by normal humans. (Yes, there are sized down versions that are much lighter.)
Honestly Shad, and everyone else who likes quality military sci fi, should just do themselves a favour and read (or listen to; all the Gaunt's Ghosts books are now available on Audible, and most of them are narrated by highly talented Toby Longworth) the entire Gaunt's Ghosts series - truly excellent books that manage to capture the esprit de corps of fighting men brilliantly even in the extreme 40K setting.
The Highlander katana loses a point for story, even though the story works for the movie. The sword is destroyed during a fight against Kane in H3 and Connor travels to Japan to specifically get a piece of Japanese iron to forge a new one the same way Masamune had forged the first one for Ramirez in 593 bc. It's a nice story piece, but if we pull the sword into reality, the canon Highlander sword is the one reforged by Connor in H3, using a 2500 year old method (folding the blade over 200 times to create the famous razor sharp edge) and iron sourced in Japan according to ancient techniques, in 1994. Connor would have been better off taking some metallurgy classes and using a bit of his enormous wealth accumulated over the centuries for help forging a god sword, but it all worked out in the end, since Kane was also using an antique, forged through antiquated methods to separate Connor's head from the rest of his body.
You guys always try to rate this stuff practically. It would be a really fun video to see you rate this all in universe. With all the perks that come with that
If you want glorious absurdity of a sword the Dragon Buster from The Legend of Dragoon is amazing. The "blade" is fire that is physical enough to cut and pierce, the "blade" can be whatever length it's wielder wants it to be, and the sword attaches itself to it's users hand/arm when the user summons it.
I absolutely love the new sit down and analyze sword videos. I was getting really sick of The sword review videos of just let’s just cut a pool noodle. I just don’t find that content particularly interesting. I prefer sparring analysis. And it’s just the same thing over and over again. These videos are fun and it is a good way to diversify the content without spending a lot of money. I think you should do different weapons like maybe pop culture, bows or masons. And pleas bring back fantasy re-armored or theoretical videos like how would fighting a dragon would actually work. Those videos were so useful as a writer.
@@gooseguyfilms4460 I’m not against sword reviews I don’t like the style of sword reviews In recent videos if it was more analysis and sparring, I would be more interested. just testing with water bottles and pool noodles is boring to me. But if you disagree with that, that’s perfectly fine just not my thing.
Chainswords are 100% used by normal people in 40k (well normal genetically). They're just scaled down. Part of the issue is they look thick because they carry over from the minitures. if made thinner I think the thickness would not be an issue. The thickness is less a lore situation and more a modeling situation and thus the art stemming from the models. Sisters of Battle use Chainswords, I know that for sure. In addition there are two handed (zweihander) sized Chainswords, including those wielded by fully unarmored Sisters of Battle (Sisters Repentia) One aspect I've noticed with those is the blade has no guard on the back side, thus making it a double sided "blade" Side note: there are other "Chain" weapons as well, such as axes and polearms. Claws and fists, although I think the Chain Fist is just a fist with a chain saw sticking out of it.
Most chainfists are a first with chainsaw. But the weapons Tyberos the red wake uses are power fists with duel chain swords mounted on he palm. (He is a monster standing over 11 ft tall in armour, so everything about him is huge) I am certain there may be others that use a similar design somewhere in 40k
Finally you mentioned Soul Reaver, I am not one to dwell much in the comments, but I would love to see your version of a redesign of Soul Reaver to get the highest rating possible while keeping its "soul" pun intended. Also you are obviously aware of imperious flaws, yet they were intentional having in accountability the magic of the lore, nevertheless would be thrilling to see a redesigned version with only real functionality in mind, maybe it could even become part of your lore, in a cliché hero loses powers story, maybe he'd have more realistic version of it forged. Really hope to see those redesigns in a near future!
40K fan here. I've long been saying how chain swords don't work for a variety of reasons. You more or less covered my points so the video is off to a good start. Time to watch the rest!
I would love to see you rate Space Marine 2 melee weapons when it comes out ! There's a lot to discuss, from the thunder hammer and power sword to the power fist !
Shad: Shameless Plug's his own book and LARP sword
Tyranth: ok how thin is the blade?
Shad: MY SHAMELESS PLUG HAS TURNED AGAINST ME!
Funnily enough I just watched the previous fantasy sword ratings video 2 days ago, and replied on the comments there that they should rate Imperius, even if it probably doesn't quite qualify as 'pop culture.' Not yet anyway.
It's probably coincidence because by that time they must've already shot this, but I still found it amusing. It's not much of a plug since the two LARP swords in the back were already in our face begging to be included.
@@Kaeldorn It’s too bad that they’re selling for $200+ (US) for the cosplay versions of Imperius. I was actually interested in purchasing one, but I can get real steel swords for less than that. 🤣
To be fair on Shad the entire design of that sword was fantasy and magic from the start and Shad has never claimed it to be a practical design for a real sword.
@@QwertyBoredom122 true
but shad trying to get away with realistic dimensions rather then its canonical ones was still funny
He didn't even mention that without the magic that makes imperious what it is, it's literally just a wooden sword with an edge, by his own established canon, checkmate Shad.
The Buster Sword is shown in-universe to be unweildable by anyone not a mako-infused super-soldier, so 1 is probably fair. I know there'll be demands for Sephiroth's sword, but I'd personally love to see you analyse Cloud's combi-sword from Advent Children.
Fully combined, it's likely heavier than the Buster sword, but with a lot of potential points of failure, however the individual swords would likely be wide-spread in ratings.
Everything about the buster sword, all of it's variants, abilities, etc. really come down to the user needing to be incredibly strong - and magical. Dual swords can be useful, and we see them being useful in Advent Children - but that just takes an incredible amount of strength to wield two, big swords like that. And the fact that he can swing the full thing like it weighs nothing is most of the power the sword has - it's even about the sword, really. Then, having way too many swords is only useful if you have a magical attack that lets you levitate them and shoot them at your opponent, or if you can fly around and grab them as you need, leaving them around strategically.
I love Derpyness of the Advent children fusion blade.
Fusion Sword is the name.
Demolition Ranch used to have one that someone made for him. He needed help to lift it.
The fact that Soul Reaver is in here warms my heart. The Legacy of Kain series is what I grew up playing.
I remember my mom and dad playing it once looked fun
Of all the things from Legacy of Kain, there's a few things you'll always remember from the series.
Kain (and his voice actor Simon Templeman), Soul Reaver sword and....
"Hey Victor... I mean Vae Victus!"
@@cocodojo I remember the beginning of Soul Reaver 2 vividly, because I had to keep restarting it. I would always get trapped inside the Dark Forge because I liked scaring away all the birds before I went inside...
to be fair, the soul river is less of a weapon and more of a tool for extracting souls
“You are worthy…”
Indigo Montoya's rapier from The Princess Bride! You kill my father. Prepare to die.
Inigo Montoya. Damn auto assume🤣🤣
@@Cloud_Strife0811 It's a rapier. There's nothing fantasy about it.
Yes, do it!
is he a smurf version of Inigo?
Dante's sword "rebellion" , Vergil's katana "yamato" and nero's sword "red queen"
Sword of Light from Dragon Quest.
@@whitewolf3051 Awesome choice!
Red Queen is just a sword as that "rev" function makes no sense.
Rebellion would likely be a 1 at most: it's *huge*.
Yamato, however, is just a long katana. Not sure if it's long enough to be deducted much, but could range 8 - 10.
If you are going DMC there is also Sparda, Devil arm Dante, Agni and Rudra, Soul Edge and Alastor(?) From DMC 1
I would literally pay money to see you guys do an episode on fan-made sword concepts sent to you by fans...and not just because I have my own that I would love your opinion on.
Get the Witcher swords for the next episode lads!
Specifically The Witcher 3 swords.
Most of them are perfectly fine type XVIIIb and XXa, appart from some of them having a wonky pommel (and a very few having weird blade shape) there wouldn't be that much to say, 90% of the swords in the game would be just "it's a longsword, it works".
there are just replicas of European swords... everything will be 9 out of 10 or 10 out of 10
@@dearcastiel4667 It would be a bit pointless as they are just longswords with unusual sheaths, grips & decoration.
as you stated 90% reality-history with 10% fantasy give or take.
Problem with the Witcher swords is none of them are all that iconic. None have a significant enough design or silhouette to stand out. Most don't have any story significance either, and those that kind of do (like Aerondight and Iris) only have a miniscule importance at best. In the end, all the Witcher swords just kind of blend in with one another; there's not a Sting, Dragon Slayer, or Master Sword among them that sticks out in anyone's mind. The Witcher might have a place in pop culture, but the swords absolutely do not.
Here are some of my ideas for the next episode of this series:
1. The Emperor's Sword (Warhammer 40000)
2. The Lion Sword (Warhammer 40000)
3. Squall's Gunblade, Revolver (Final Fantasy 8)
4. Seifer's Gunblade, Hyperion (Final Fantasy 8)
5. Blaze Edge/Blazefire Saber, Lightning's Gunblade (Final Fantasy 13)
6. Yamato (Devil May Cry)
7. Rebellion (Devil May Cry)
8. Kanshou & Bakuya (Fate/Stay Night)
9. Arondight (Fate/Zero)
10. Saba, White Ranger's Sword (Mighty Morphin Power Rangers)
11. Raiden's First High Frequency Blade (Metal Gear Rising)
12. Future Trunk's Sword (Dragon Ball Z)
13. Kadaj's Souba (Final Fantasy 7 Advent Children)
14. Genesis Rhapsodos' Rapier (Final Fantasy 7 Crisis Core)
15. Brotherhood (Final Fantasy X)
12:35 the moment shad realized he fell into his own trap LOOL
Poor Imperious
And Poor Shad making his fantasy design part of this
Master sword vs a one ml thick blade and they both get a 3? Idk about that chief
-The Heron sword from wheel of time
-Hiccup's flaming sword from how to train your dragon
-Sword of the creator from fire emblem 3 houses
Those are my top 3 picks for now.
Chainswords are used by everyone in the Imperium. Orks have their own version with Chain Choppa. The Craftworld Eldar have a sleek variant used by the Striking Scorpions.
Even the guard use smaller normal size chainsword
and sisters too
you know what my favorite thing about the Striking Scorpions, they are the stealth ambush units, with chainweapons.... nothing says i'm better at sneaking up on you like having a revving chainsword and still being effective.
@@theelephantandtherider9536, they achieve stealth by keeping their chainswords off until the moment they strike for that ultimate moment of surprise.
The only unwieldly variant is the evisorator.
Here is the usual full support for channel growth. I am really digging this new series by you guys.
So fun fact Shad I have a 3d model I have printed for the Soul Reaver. Total length is just about 45 inches. Blade from tip to skull mouth is roughly just under 30 inches. The Handle from pommel to the connector to the skull is 9 and a half. Skull from connector to mouth is 5 and a half to 6 inches based on if you include the fangs or not. The Cross guard is at the widest 12 inches. From the tip of the guard near the mouth to the back of the guard near the handle is 7 inches. The guard thickness is just under an inch it moves in and out so its not constant.
I didnt include the blade thickness because its actually thicker then its suppose to be as I needed to adjust to make a 1/2 inch bar go through to act as the Sword's spine.
Now its actually a fairly comfortable sword to swing the balance point is the skull just over your hand and the length of the handle makes it a reasonable hand and a half sword I dont find issue using it one hand or two handed. Now the Handle IS round for my version but it has a spiral cut into the handle which actually makes it stick in your hand and the edge alignment seems to happen naturally. I think this might be because of the guard they naturally want to align because of that. But all that said it would be VERY easy to make it oval shaped and the spiral to disguise it.
And this is the issue I think you guys run into some of these swords are actually better then you realize because you actually havent gotten a chance to use it. Yes looking at it you can spot flaws but when in motion and at play those flaws might actually disappear like how the Blackbird plane when it was on the tarmac was a leaky mess but when in the air at speed it was a sleek Mach 3 bird.
So for some of these swords it might be a good idea to mock them up and try them out. You might be surprised how good it works when it actually is being used vs just looking at an image.
Keep in mind, they make human sized chainswords as well. So it's not exclusively an Astartes weapon.
Yeah, Cain uses a small normal human sized one, even he says its not a sword. It's closer to fighting with a super lethal weedeater.
I think we need an Excalibur off. Who truly made the best legendary sword? I mean that poor blade has been abused in some of its depictions in the many series it appears.
Sword in the stone, Soul eater, Fate, Sword art online and a major whole butt load of other media.
an Excalibur showdown would definitely be interesting
Sword Art Online could be an interesting discussion...since they're all virtual reality weapons...
Doesn't change the fact that strange women lying in ponds distributing swords is no basis for a system of government.
The version from the movie Excalibur would win. It's an actual English Longsword.
There is also Excalibur from Merlin
9:50 to be fair, there are real life humans who have specifically trained to be able to wield a "buster sword". it's by no means nimble like a long sword or tachi, but they do demonstrate the capacity to swing and move it around for extended periods of time. also cloud IS a superhuman SOLDIER (literally the name of the super human program) so it's not AS far fetched to say it's been specifically designed to be wielded by a SOLDIER. for your average person though 100% virtually useless as a combat weapon.
EDIT: I found one! Named gameofharmony and I undersold him. he is genuinely training in buster sword swordsmanship and it's f**king terrifying.
www.youtube.com/@gameofharmony/featured
EDIT2: He uses sword combos with a 17 lbs Buster Sword and a 20 lbs dragon slayer to workout, not actually fight. still terrifying af
As a former lumberjack, I 100% agree with the low rating of the chainsaw sword. Those things will get dull in *literally* one second if you accidentally touch the forest floor with them while you're sawing. Dirt contains sand and rocks, which dull the teeth way faster than you'd think. And they're heavy.
However, they'd be great if your enemies were super slow and not wearing armor.
Some magic sci-fi metal takes care of both problems; it's super durable and light enough to swing around.
The bigger problem is their visual depiction: the teeth are only half the width of the "blade"
Game's Workshop's artists had _never seen a chainsaw_ back in the 80s when they made the original designs.
They wouldn't be teethed to cut wood more like bone saws
As a former lumberjack you should have realized that chain sword is absolutely nothing like a chainsaw. It is more like a trenching machine with thick hooks for tearing through hard dirt and rock.
You mean you don't have the Hallmark 40000 Chainsaw Samurai Pro, Self Sharpening Blade?
*Shameeeeeee!!!!*
One of the worst issues I see with the WH40K chain swords is that rest of the blade is wider than the chain part. It's just going to stop as soon as it's deep enough for the sides to hit.
I'm just happy that the Soul Reaver was featured here.
As for the question about the handle, closest I can describe it is "molded metal".
Please do swords from Elden Ring next!
W dono
Also a great idea
@@galactigo4463 Especially because of the new categorie of light greatswords introduced in the dlc
so interesting thing about the soul reaver, while I do respect the fact that yeah round handles are kinda bad, it actually makes a -little- sense if you take into account that the sword in question was never meant to be used by a human. It was meant to be used by a vampire, specifically an ancient vampire, who all have hands which consist of two forward talons and one 'thumb' talon which, when closed, actually end up being much rounder than a human hand and thus ergonomically one could explain why the handle is a lot rounder to account for this. That said, still makes edge alignment a nightmare.
Last time, when you did Skyrim swords, you forgot the Daedric artifact, Dawnbreaker. If you do not mind, please cover that when you get a chance. It’s a personal favorite. There’s also the delightful selection Elden Ring (+DLC) has on offer.
He was focusing on *non* unique swords that had both one hand and two hand variants, being able to be forged by the player was optional.
Oh, and the Bloodskal Blade.
Older TES games also have interesting weapons to analyze, like the chitin swords and the Daedric Crescent from Morrowind.
Loving this series. I would sugest rating more 'realistic' swords next, like Uhtred's sword from The Last Kingdom, Achilles's sword from Troy, the swords from Gladiator, Kingdom of Heaven, etc.
Sorry Shad, I would give Imperius a 2 at BEST because of how thin its blade is. If it had all its magical properties I would give it an 8. A 9 if the blade wasn't so wide.
And if it weren't so thin as to sheer itself apart in the swing, it would be so blade-heavy as to be a bit of a wrist-breaker. It's like a rapier with a triple-wide blade. Not to mention how much that Tang would be a critical point of failure under impact stress. I would never want to wield it if my life were on the line.
For how much he says about not liking spiky handles and guards, he then added six massive spikes to the guard of his own sword and takes off no points
He only takes off points if the spikes are facing towards your hand, not your enemy.
@@aaronbrazinski5370not all spikes are the same
So, unrelated, but regarding Imperius, it is used one way because of the hand guard ; how would one use the secondary blade ? Why have a blade on that side at all ?
Shad you forgot to make Titan drop his jaw by telling him what's your sword blade is made out of I still remember that episode you said wood
Tyranth became a titan lol
If you're talking about Imperious, Shad said it was made of a crystalline structure
12:56
@@-Gax-it's made out of wood transformed into an indestructible crystal by the in universe magic
@@comlitbeta7532 Which is practically just fossilized wood by real standards.
Petrified wood is rather heavy.
The thing about that chainsword is that it isn't built like a chainsaw at all. It is built like a trenching machine. Trenching machines also use a chain, but instead of little blades for cutting wood, they have thick hooks for tearing and digging through hard dirt and rocks. It kinda doesn't matter if they get dull because they aren't cutting in the first place. They are ripping and mangling.
That being said, you couldn't possibly use it in real life. You would need incredible strength to prevent it pulling itself out of your grip. It's also enormous and heavy.
but if this gets stuck in you, there would br ABSOLUTELY no way to stick it off, and yet shad thinks it's possible. If someone created a functional, shrunken prototype for a battlefield, its main purpose would be to terrify an enemy with it's messiness and untreatable wounds it would leave if someone SOMEHOW managed to survive such a strike.
@@latawieclatajacy9053
I think the sword was designed to tear through the insanely resistant armour present in the setting, any normal current day weapon would not be able to even dent the armours (even the biological ones) in wh40k.
People make fun of lasguns, but they are better than anything present today as infantry weapons.
A few things to note about the buster sword, while it's obviously awful, it's more designed to take down monsters and non-sword wielding foes due to the jobs of SOLDIERs. Additionally, as you show, the wide blade doubles as a more defensive device.
Still terrible, but it has reasons to exist.
As others have pointed out, even the imperial guard uses chain swords, the thing about warhammer 40k weapons is that there’s so many variations of every weapon, size variations for different types of units and races. I think it’s important to point out that being hit with one would be akin to being hit with a heavy mace, at the very least, and that’s without taking the chainsaw into account. So you could see it as a heavy blunt impact + mechanical cutting/mangling wounding effect. It sort of makes sense in universe, as you could see it possibly being laid onto armor or something and being used to cut through it. Against an unarmored person even in real life I’m sure it would end your day, or your life.
Also chain swords come in all sorts some are Chain, some are reciprocating, some are vibrating. And they all have blades that have blades that have molecular tech cutting.
I remember a mention by Commissar Gaunt where he's recalling a fight and talks about reversing the direction the teeth were moving so it kicks a different way on contact.
I found that quite interesting at the time.
While all of that is true, the fact of the matter is that a sword is *designed* for combat with other swords as they said. And if you pit that chain sword against another sword, it isn't going to go well for the chain sword user.
It's a cool design, but if you can't be honest with yourself and admit when something isn't realistic and just accept that, then there's no point watching this video.
I'd love to see you get your hands on a prop Qualta Blade from Farscape. The iconic sword/energy rifle wielded by the Luxans. I'd say it has some great qualities that make it a useful weapon.
Would love to see a rating of swords from The Chronicles of Narnia.
Yes! Peter’s sword!
@@EpicRandomness555 i would like to think it would be a good sword as a trend I am seeing, a the less elaborate a sword is, the better the functionality is.
@@TheRevanchrist Yeah it seems like it would be normal, but up close there might be some details that bring it down a bit.
Facts, Peter's Sword is the one of the best in fiction.
Same
Guys. Pls just use that popular S-F ranking chart that pretty much everyone uses. Or just use the same chart with a 10-0. Very nice visual to look at. But as always love the videos guys, keep up the good work!
My recommendation is Dawn from Game of Thrones and all of Zoro’s katanas from One Piece. Great video guys!
They give EVERY katana a 9. LoL
Show version of Dawn was dogcrap, putting a sun on the hilt of a random steel sword was a joke. Where was the magical, milk-white blade forged from a meteor with similar properties to Valyrian Steel (but predates Valyria by around 3000 years) that might actually be "Lightbringer" the sword of Azor Ahai himself, the weapon that defeated the White Walkers 8000 years ago?
Needle from Game of Thrones, too.
Love Shadiversity videos.
👍👍👍👍😎😎😎😎
Intersting comparison video again. Glad to see you and Tyranth still doing the long form videos.
😃😃😃😃
What about the Swords from the Devil May Cry Video Games like Rebellion and Yamato
Can’t believe already 1,68 Mio subs
You deserve it.
Am subscribed since don’t know two, three years.
Go on and win the world.
Still love your work, your way, especially those conditions we face.
If you continue this as a series I'd have a few ideas:
Since the lighsaber is already rated, what about Vibroblades? The closest in real life are ultrasonic knives.
High-Frequency Blades are basically the same, but from the Metal Gear Franchise. Either Raiden's unnamed sword or Sam's Murasama.
And since the Buster Blade was brought up, what about the Muramasa from Sephiroth? Probably the same as a Katana with size advantage/disadvantage.
Also, as a Sephiroth cosplayer I can tell you that a sword with that length is surprisingly fast to move. (As long as it's 1.4kg)
And if you make a Buster Sword, but adapt it to real life a bit (thinner). You can make an ~7kg sword.
Also one minus point for Imperious: If you make one the wrong way around, you can't carry it with your dominant hand.
Edit: Also a sword that is way out there: "Battle Cry" from Brütal Legend, worn by Lars Halford
Um, actually, Sephiroth uses the Masamune.
@@andrewli6606 You're right. After Sams sword I thought "masa" is correct and then added the front part, not the latter.
Jade: is completely useless in any context that isn't decoration or maybe buttons on a shirt
The jade guard: intentionally designed to look like a love tap with a wooden sword would break it, to the point that it might as well not exist
Goddess Sword's cross guard: literally has similar outward dimensions, can actually survive more than one hit, is NOT made of useless material that would shatter on contact with another sword, is surprisingly wieldy aside from the handle being round.
Shad: gives a 9 to the one with the useless guard that would literally break on impact with a wooden sword, gives a 3 to Soul Reaver despite having the second most impractical hilt on the entire channel, gives a 2 to a hilt that would actually survive more than one hit AND allow you to move it around reliably... For no other reason than "all one material plus round hilt".
The other guy: brings up multiple points of failure with one blade, acts like being made entirely of one material is even worse, also claims that the Master Sword's hilt has a leather wrap when the original depictions also showed it having a hilt that was all one material (also the original depictions of the Master Sword were blue, it wasn't until Twilight Princess and/or Master Quest that it was reconned to be purple).
LOL. They filmed that Masters of the Universe live action movie all around where I used to work in Whittier, CA. Came around the corner one morning and our parking lot was full of spaceships.
Honestly they should do a Final Fantasy special reviewing all the main character swords.
My favourite shad series most definitely
Would be interesting to see some of the other Zelda sword designs: the Biggoron sword seems like a pretty standard 2 handed sword, and the Kokiri Sword seems like a pretty decent dirk (or just child sized arming sword, given it's made to be wielded by a Kokiri, who are basically stuck as 10 year olds forever) The Razor Sword would probably be the most interesting to get an analysis of, though, as cool as it looks, I am not expecting a favourable review!
I like how your sword has the exact opposite problem as the buster sword!
The Buster sword has no problems.
It can be a shield, construction beam and sword.
Optimus Prime's and Megatron's swords from Transformers: The Last Knight would be fun to see
Shad still hasn't done DMC's Rebellion, or Red Queen, or Yamato?!?!? FOR SHAME, SIR!!! FOR SHAME!!!!!!
Wasn't Rebellion in the first video?
@@RatchildUK Unfortunately, no.
Let's not forget the good old Alastor, Force Edge & Sparda
Nor has he done Sword of Light from Dragon Quest.
@@Aczie042 Could have sword he did, I even remember them talking about the pommel dragging the score down because it is spikey.
EDIT: I think it might have been a Skallagrim video and my brain is mixing the two videos together.
About chainsword. Guys there is something called kickback in chainsaws as well :). Kinetic energy of movement of chain will make it bounce of target unless held down and pressed towards the target with some force.
Soul Reaver's handle looks as if it's made from Chitin, rather than metal. I would definitely dock points for the Highlander katana for having a really uncomfortable handle and pommel. A seven maybe.
As someone who owns an official Marto replica of the Ramirez/Connor katana, even though it's purely a decorative weapon, when I do handle it (when I clean it, I still swing it around a bit just for the fun) as an adult I've come to realize why the hilt is terrible lol. I've had that sword for 26 years now.
The movie grip was clearly significantly thinner and had far less protrusions in the decorative carvings, making it much more practical to wield.
@@jedirayden interesting back story thanks for sharing it.
Check out Battle Angel Alita's Damascus Blade from the manga. There were originally 2 blades mounted to her forearms, but later she turns one into a giant butterfly sword!
Shad has already reviewed the movie version. It wasn't good.
What @@RokuroCarisu
Link pls
@@code066funkinbird3 th-cam.com/video/2L6oFW_L8lw/w-d-xo.htmlsi=u3w5qf54v3daTG4g
@@code066funkinbird3th-cam.com/video/2L6oFW_L8lw/w-d-xo.htmlsi=SOTU0Cp7Wi_hVhRE
I'd love to see Zar'roc and Brisingr from The Inheritance Cycle/Eragon. You could see the movie version of Zar'roc but fan art/ man at arms for Brisingr
Yes! There is official book art for the swords as well, should be totally usable swords
The jade pieces of green destiny look like decorative pieces with a functional cross guard under it.
Can you do a Power Sword from 40k? It's pretty unique as far as sci-fi swords go.
Yeah, the whole disruptive energy field thing is cool
Arguably, you could do all 40k melee weapons, and it would be fun
No, you couldn't because energy fields like those used in Stars Wars, Warhammer, Star Trek and co are currently pure fantasy.
Unique, as in sci-fi flavored sword qi.
They did lightsaber though.
Chainswords aren't just for astartes, they make human sized versions as well. And 2 handed versions called executioner chainswords.
Also a Ripper from Fallout
I will remain a stan or the Tri-sword of Talyn "Sword and the Sorcerer"
⛩️😏⛩️
And ODM Gear, "Attack on Titan"
I'm waiting for the Tri-bladed sword as well because that one's going to be all kinds of interesting mess lol.
Oh, speaking of all kinds of mess "swords", there's a bunch of oddball ones form that one manga / anime series Blade of the Immortal. It'd be interesting to see how low several of them score since they're mostly impractical outside of very specific / niche applications.
@@cocodojo hopefully he will as a revisit, as he's raked it previously (without the context of ever seeing the movie) 👀
Maybe have a look at the swords from Fable too since also new game coming again
Heck yea new shad video
Sword of Acorns from Archie Sonic Comics.
Anduril from Lord of the Rings.
Inigo Montoya's Rapier from The Princess Bride.
Anaklusmos from Percy Jackson Movies.
Dragon Buster from The Legend of Dragoon!
Achilles' Sword from Troy.
Godfrey de Ibelin's Sword from Kingdom of Heaven.
Cpt. Jack Sparrow's Sword from Pirates of the Caribbean.
If another episode gets made, I could list out more blades in its Comment Section!
Imperius actually looks pretty cool.
You could do an entire series just for Power Rangers/Super Sentai weapons.
Some like Lost Galaxy's sabers or Samurai's spin saber are pretty good, others... not so much.
Ya'll should do a episode with the swords from Bleach
Hmmm probably three of four would be functionable
@@AM90715 well several are useable, more than u think
@@EPY0N true but I haven't watched the anime in awhile
@@AM90715 ah, heh, fair
Those would vary in functionality from mode to mode so that would be a lot of material to go over, perhaps enough to fill out an entire episode.
I see the Soul Reaver, I click.
Also, you really need to talk about the books in the background, the room looks so cool!
Do Morgan freemans from Robin Hood prince of thieves
Might as well cover the Locksley family sword as well. The one stolen by the Sheriff, and used in his fight with Robin.
Great vid, thanks lads! If you do a Part 3 I'd love for you to include Dar's sword from 1982's 'The Beastmaster' flm.
Could you do Peter's sword from Chronicles of Narnia?
Have you guys already done the swords from sword art online?
The Green Destiny was definitely a good one.
I'd love that perfected Master Sword redesign from the old old video.
I know The Sword of the Rivan King from the Belgariad world fail, basically a solid magic meteorite metal sword, oversized and originally wielded by a next best thing to literal giant. And the magic living rock made it so that only one person could pick it up and the live, as well as all setting all the way for the approved wielder.
I think it would like to see some swords from some comic books make an appearance. Or maybe some other swords from the Zelda series.
It's a shame the Red ranger sword was so chunky.
im so happy to see the reaver turn up it makes me SUPER happy as i grew up with the legacy of kain~
"Our Sword count goes to Eleven!" -Spinal Tap, probably...
Witcher Swords, Kai's sword from Ninjago (for the memes), Indigo Montoyas Sword, Sokka's Space sword from Avatar Last Airbender, and the Hook Swords found in Avatar Last Airbender and other anime I can't remember the name.
Do a bookshelf tour, Shad.
yes
But how practical would a bookshelf be as a sword? Tyranth wouldn't be able to complain that they've got rounded handles or the geometry or the thickness of the blade....
I got a fun one for you, Blood Angels Mephiston's sword, Vitarus. Very unique design.
In defense of the master sword:
1: the "discard" is to protect Links hands when he performs the "fatal blow"
2: the hilt is made of timeshift stones which is lighter than steel.
3: the blade is made of master ore which is lightweight because we can see others beside Link hold it.
Also, they are working off the assumption that the hilt has to be made of steel or brass. .......what about brassor steel plated with flushed rivets. It is historical think to have hilts made of different times of material together, just look at migration era swords. Also, personally, why is the imperious hilt so pointy. TBH, I can imagine grappling techniques were a opponent shove the hilt points into the wielder
Only point one is relivent to this analisys.
@@ShiningDarknes Yeah, for practically, the points of the rear end shouldn't be there, they serve no other purpose than say, ball tips can. I'm assuming the branches the lines and is to have mutiples to catch blades and no with the sun theme on the piece
@@ShiningDarknes 1: No, the disc guard was a later addition. It didn't have it in LttP. OoT added it.
@@ShiningDarknes I wasn't refuting the utility of the disk, I was refuting that it was in every game. It's not even in the artwork for LttP or its image in the title screen. And OoT lacked it in in-game models as well. The artwork added it. If we want to only count in-game models, it didn't show up until Wind Waker.
I'd be interested in seeing the skyrim maces and hammers get rated along with other fantasy maces and hammers
I know it's not a popular anime/manga, but all of Manji's weapons from Blade of the Immortal would be a cool analysis.
I was just suggesting this, but yes, there's quite the arsenal of them to nitpick, but a few that does look surprisingly practical!
I think chainsword duels were depicted in Gaunt's Ghosts. Special techniques are involved when fighting with them whereby the wielder rev and reverse the chain in order to pull or push the opponents weapon in unexpected ways.
I feel like the handle of the highlander katana would be insanely uncomfortable with all that engraving
I believe the goddess sword also has a shorter balde than the master sword, not by much but noticeable, also looking at other swords from Zelda, especially Breath of the Wild/Tears of the Kingdom would be interesting
Edit: in terms of the Master Sword's thickness, there are seemingly 2 designs, one being much thicker, seen in the WindWaker for example, and a thinner, longer one seen in other games like Twilight Princess and seemingly even thinner and longer in Breath of the Wild
Excalibur from the 1981 Excalibur movie. Red Sonja's sword from the 1985 movie. Dar's sword from Beastmaster (1982 movie). The Sword of Troy, from the 2004 Troy movie. Icing Death and Twinkle, Drizzt Do'Urden. OK, it's not a sword, but Chingachgook's gunstock war club from Last of the Mohicans (1992).
+1 for Twinkle and Icing Death. Though it may be a bit hard to decide on a definitive version because there's quite a few that differ wildly.
They did that version of Excalibur. 8 or 9, I think due to weight balancing.
The green destiny is two jade pieces over a brass guard. You can see it
The best zelda sword is the ordon sword from twilight princess, it's basically a normal but thicker arming sword
I was trying to think of the name of that sword just to bring it up. Thanks lol
I love ALL Shadiversity videos!!!! ❤
There actually are ultra-thin swords. The Urumi from India, for example, is actually wielded like a whip.
There are, but they wouldn't get a high rating either. Probably about imperious, though maybe a bit more for the reach.
They tested the Urumi on Deadliest Warrior (remember that show?), actually. They did some pretty nasty cuts on ballistics gel dummies.
Not _damage_ , mind you, just _cuts_ .
Hey Shad I'm writing a fantasy book; I've got a character that wields a greatsword, and after a period of abnormally prosperous work, they're upgrading their sword from enchanted steel to a fantasy aluminum alloy that is slightly more durable and noticeably lighter than steel. They have used this to increase the size of their great sword, while maintaining only slightly increased weight. Would this be a viable change based on material differences?
Seen a video of someone talking crap about shadiversity earlier, screw that dude at least these videos are fun to watch.
There's always going to be some of those. Shad's not doing these videos from a strictly sword fighting like they are point of view, but more of a "How practical and / or functional would these really be?" point of view. We've always wondered about it, Shad's just trying to answer what we're curious about in his own way by analyzing it from a curious person's viewpoint.
@@cocodojo I will criticize that a perfectly functional historical sword doesn't get a 10/10 because it's not a longsword essentially. So pretty much all East Asian swords are barred from getting a 10/10. And shorter swords. And single-edged swords. Like criticizing a pistol for now shooting as far as a rifle.
Always best to form your own opinion of people, especially if others tell you not to pay attention to them.
Your reaction to Green Destiny shows you guys need to do a deep dive into Chinese swords, both Jian like the movie sword as well as Dao profile swords. Maybe you guys can get LK Chen to work with you!
"Floppy" is probably not an adjective I want in my battlefield weapon
The Soul Reaver? Shad you mad lad. You awaken so many memories. I love the Legacy of Kain games.
If you want a decent attempt at 40k commentary of normal people using chainswords, then I direct you at Guant's Ghosts series. Specifically "First and Only" I believe, I think chapter 28?
They show how duels are done between chainswords wielded by normal humans. (Yes, there are sized down versions that are much lighter.)
Honestly Shad, and everyone else who likes quality military sci fi, should just do themselves a favour and read (or listen to; all the Gaunt's Ghosts books are now available on Audible, and most of them are narrated by highly talented Toby Longworth) the entire Gaunt's Ghosts series - truly excellent books that manage to capture the esprit de corps of fighting men brilliantly even in the extreme 40K setting.
The Highlander katana loses a point for story, even though the story works for the movie.
The sword is destroyed during a fight against Kane in H3 and Connor travels to Japan to specifically get a piece of Japanese iron to forge a new one the same way Masamune had forged the first one for Ramirez in 593 bc.
It's a nice story piece, but if we pull the sword into reality, the canon Highlander sword is the one reforged by Connor in H3, using a 2500 year old method (folding the blade over 200 times to create the famous razor sharp edge) and iron sourced in Japan according to ancient techniques, in 1994.
Connor would have been better off taking some metallurgy classes and using a bit of his enormous wealth accumulated over the centuries for help forging a god sword, but it all worked out in the end, since Kane was also using an antique, forged through antiquated methods to separate Connor's head from the rest of his body.
You guys always try to rate this stuff practically. It would be a really fun video to see you rate this all in universe. With all the perks that come with that
The Soulreaver is a huge Kris.
49 seconds ago is wild work.
5 min for me
If you want glorious absurdity of a sword the Dragon Buster from The Legend of Dragoon is amazing. The "blade" is fire that is physical enough to cut and pierce, the "blade" can be whatever length it's wielder wants it to be, and the sword attaches itself to it's users hand/arm when the user summons it.
Shad PLEASE rank the swords from Sword Art Online, the anime. Its got some cool designs and some really wacky ones
What about the sword from Eragon? Zaroc and Brisingr
I absolutely love the new sit down and analyze sword videos. I was getting really sick of The sword review videos of just let’s just cut a pool noodle. I just don’t find that content particularly interesting. I prefer sparring analysis. And it’s just the same thing over and over again. These videos are fun and it is a good way to diversify the content without spending a lot of money. I think you should do different weapons like maybe pop culture, bows or masons. And pleas bring back fantasy re-armored or theoretical videos like how would fighting a dragon would actually work. Those videos were so useful as a writer.
I agree, but I definitely still like the sword reviews.
@@gooseguyfilms4460 I’m not against sword reviews I don’t like the style of sword reviews In recent videos if it was more analysis and sparring, I would be more interested. just testing with water bottles and pool noodles is boring to me. But if you disagree with that, that’s perfectly fine just not my thing.
The gun blades from FF8 and the one from FF13
Chainswords are 100% used by normal people in 40k (well normal genetically). They're just scaled down.
Part of the issue is they look thick because they carry over from the minitures. if made thinner I think the thickness would not be an issue. The thickness is less a lore situation and more a modeling situation and thus the art stemming from the models.
Sisters of Battle use Chainswords, I know that for sure. In addition there are two handed (zweihander) sized Chainswords, including those wielded by fully unarmored Sisters of Battle (Sisters Repentia) One aspect I've noticed with those is the blade has no guard on the back side, thus making it a double sided "blade"
Side note: there are other "Chain" weapons as well, such as axes and polearms. Claws and fists, although I think the Chain Fist is just a fist with a chain saw sticking out of it.
In the real world I would definitely take the chainsword over Imperius. I think a spiked club is better than a limp dick.
Most chainfists are a first with chainsaw.
But the weapons Tyberos the red wake uses are power fists with duel chain swords mounted on he palm.
(He is a monster standing over 11 ft tall in armour, so everything about him is huge)
I am certain there may be others that use a similar design somewhere in 40k
Lol a new species of dinosaur has been identified! The "chainsauwrwr" good job shad!
32:30 You opened a door here; I now suggest looking at other swords from Power Rangers/Super Sentai.
Saba!
Just call them super sentai, they were made for that. At this point people are more likely to know sentai rather than the mericanised abomination.
Finally you mentioned Soul Reaver, I am not one to dwell much in the comments, but I would love to see your version of a redesign of Soul Reaver to get the highest rating possible while keeping its "soul" pun intended.
Also you are obviously aware of imperious flaws, yet they were intentional having in accountability the magic of the lore, nevertheless would be thrilling to see a redesigned version with only real functionality in mind, maybe it could even become part of your lore, in a cliché hero loses powers story, maybe he'd have more realistic version of it forged.
Really hope to see those redesigns in a near future!
40K fan here. I've long been saying how chain swords don't work for a variety of reasons.
You more or less covered my points so the video is off to a good start.
Time to watch the rest!
I would love to see you rate Space Marine 2 melee weapons when it comes out ! There's a lot to discuss, from the thunder hammer and power sword to the power fist !