How to replace fuel injectors Toyota Corolla. Years 1991 to 2002

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024
  • How to replace fuel injectors Toyota Corolla. Years 1991 to 2002

ความคิดเห็น • 119

  • @darreneverding2499
    @darreneverding2499 4 ปีที่แล้ว

    Thanks Peter this really helped me and saved me an expensive mechanic bill, you are the best.

  • @RG615
    @RG615 3 ปีที่แล้ว

    Hi Peter....having issues with car having great crank but NOT starting... so, I will clean injectors ( have never done in 1990 corolla) and hoping will do the trick. Then if no start, im going to the fuel pump . Yes, a great video and much ive learned. Thx Peter !!! P.s. I have checked fuses....

  • @UMAR-ql5wg
    @UMAR-ql5wg 3 ปีที่แล้ว +2

    Hi sir i just watched ur video and it was very helpful for me i just noticed knocking issue in my car at cold start but when the engine temperature reaches normall the knocking sound goes away.what u think about this noise sir and my engine is 5afe 1500cc.
    2nd) i m facing bad fuel economy like 8kmpl in city driving and my car is manual also plz share some tips of increasing this bad fuel economy. Thanks

  • @greenball9
    @greenball9 ปีที่แล้ว +1

    Hey Peter. Good video .
    Quick question. Is it really necessary to depressurised the fuel system before removing the rail and injectors or does it really make much difference?

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  ปีที่แล้ว

      It's a good idea to reduce the pressure, because otherwise you can splash gasoline on your face.

  • @davisonshimunungu9608
    @davisonshimunungu9608 4 ปีที่แล้ว +1

    very informative video. Finn can you assist me have a 1996 corolla idles rough, very poor on fuel and when parked at home l can smell petrol coming from the car

  • @justinfarrell7013
    @justinfarrell7013 ปีที่แล้ว

    Hey Mr Peter wonderful video i have a toyota corona ae90 I bought it has been down for at least 10 years can you tell me what are the most important parts to change please.

  • @fazalmanan4615
    @fazalmanan4615 7 ปีที่แล้ว +2

    all your video are very good we learn every things from that thanks again

  • @futumu235
    @futumu235 ปีที่แล้ว

    I have a corona 1995 with 4s engine but don't know where the return tube is put of feul .thank you I now Know how to clean the feul injection

  • @lesterton8945
    @lesterton8945 7 ปีที่แล้ว +1

    Very detailed video tutorial! thanks for uploading it. hoping to fix my corolla tomorrow.

  • @jakedaez5975
    @jakedaez5975 11 หลายเดือนก่อน

    This is very informative. Btw, does Lexus ES300 fuel injectors fits for this type of engine?

  • @leonardomendoza1904
    @leonardomendoza1904 5 ปีที่แล้ว +5

    The fuel injectors are in a different location and have an easier access on Corolla 1998-2002

  • @valenlabella
    @valenlabella 3 ปีที่แล้ว +1

    hello is there any simple way to put away injectors? I need clean it no replace for new!!!! Is very expensive here in Venezuela do that job with a mecanic man :(

  • @cavalier171
    @cavalier171 8 ปีที่แล้ว +1

    MR,PETER do I have to disconnect car battery or disable fuel pump pressure? and witch fuse I should remove and where it is
    location? thanks so much your videos are very helpeful and clear

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  8 ปีที่แล้ว

      +mohamed moktar Please disconnect battery. And Thanks for comment. :-)

    • @tehpwnmstr
      @tehpwnmstr 8 ปีที่แล้ว +1

      I usually fuel pressure too. Start the car up and while it's running, use a pliers and remove the EFI fuse, should be 15 Amp on this car.

  • @user-jl4ih6vz4e
    @user-jl4ih6vz4e 3 ปีที่แล้ว +1

    Hello, I have a Corolla 94 model. If I step on the gas pedal, the pedal does not respond quickly, and the car does not have a towing, and if I press the gas pedal, the Jake engine works.

  • @richardnava4141
    @richardnava4141 ปีที่แล้ว

    Hello Peter, i nerd your help... Is there a order for injertors cables??, I have a Toyota Corolla 1992. Thank you for your help máster.

  • @alizavedevan7439
    @alizavedevan7439 2 ปีที่แล้ว +1

    very nice and good job 😀

  • @DennisChristiani
    @DennisChristiani 6 ปีที่แล้ว +1

    My 1994 AE-100 is idling rough. I've changed the fuel pump, spark plugs and wires. Do you think it could be the fuel injectors?

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  6 ปีที่แล้ว +2

      Hi, it is throttle body. There is idle valve, what is stuck.

    • @leonardomendoza1904
      @leonardomendoza1904 5 ปีที่แล้ว +1

      Could be bad spark plug wires. Happened to me for weeks before I got the check engine light.

    • @realking1591
      @realking1591 5 ปีที่แล้ว +1

      Throttle body

  • @antonioraya6071
    @antonioraya6071 9 ปีที่แล้ว +1

    nice imformation tankyuo i am learning a few tings

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  9 ปีที่แล้ว

      +antonio raya Thanks again. :-)

    • @antonioraya6071
      @antonioraya6071 9 ปีที่แล้ว

      yes is me again my mecanic has not call me yet i told him about the timing belt and i dont kwno if he check it he thinks because the car has syarted a couple times that something else is grong i going to let him deal whit it i dont want to push him i don want him to get mad ill just wait and see

  • @ae-mq2yo
    @ae-mq2yo 7 ปีที่แล้ว

    i love your video. please make more video about this 4afe engine.

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  7 ปีที่แล้ว +1

      OK and Many Thanks and Great day to You ! Best Regards Peter Finn

  • @aruananth7047
    @aruananth7047 ปีที่แล้ว

    Thanks peter

  • @HeLlO1495
    @HeLlO1495 8 ปีที่แล้ว +2

    Educational video

  • @emilior.silvac.569
    @emilior.silvac.569 4 ปีที่แล้ว +1

    Thanks Peter

  • @richardnava4141
    @richardnava4141 ปีที่แล้ว

    Hello Peter, how can I check the injertors order cables?. Thank you for your help.

  • @calebcaruso
    @calebcaruso 4 ปีที่แล้ว

    hey nice work, do you happen to have the part number of our fuel injector?

  • @pedroornelas1962
    @pedroornelas1962 5 ปีที่แล้ว +1

    Is it really nessessary to take apart the throttle body cables? Looks like u can jst put it aside

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  5 ปีที่แล้ว

      Thanks ! 👍

    • @datboidominican
      @datboidominican 5 ปีที่แล้ว +2

      Idk if you still have a factory air filter on your motor. On my 7afe, I have an intake kit. Comes off super easy. Now I hadn't watched any videos to replace my injectors but I should've. I mean, still it's fairly simple. Just some hard to reach bolts.
      So, from the beginning. I wouldnt have removed any of those sensors from the throttle body unless I had the factory air filter on it and I needed more space later on. But, first thing. I took of battery terminals.
      Second, there are four size 12 mm bolts on the throttle body I removed with a socket and adapter. After that, there's a size 14mm on this piece of metal right next to the motor that holds the 4 ignition cables and this metal also holds up the air/fuel pressure regulator. There will be two 10mm smaller bolts on each side of the metal after you pull the throttle body. Disconnect the two very small vacuuum hoses from the top of the throttle body. You dont need to disconnect the 3rd one. Now you can pull the throttle body off.
      Pull it aside, will have to use your elbow or forearm to keep it aside while you get the two size 10mm with a small wrench. Shouldnt be hard to get off(use wd40 or PB blaster). After that, you'll need a size 12mm wrench to get the nut on the fuel pressure regulator(right side/closest to you if youre leaning over the car on the right).
      Then that wrench wont fit the left side. I used a size 12mm socket. This one is a bolt youre loosening. I unplugged a sensor that's right below that regulator in order to nudge the bolt off with the socket and ratchet. You dont have to unless it gets in your way. Just remember to plug it back in if you do.
      Now you should have a 12mm nut and a 12mm bolt in your hand.
      All tgats left are the 3 philips allen key screws and 2 size 12mm bolts underneathe the fuel rail. Also, get a size 17mm wrench and relieve the pressure of the fuel rail. On the right-hand side there's a nut you just loosen a bit, youll hear the air hiss out.

    • @pedroornelas1962
      @pedroornelas1962 5 ปีที่แล้ว +1

      I guess on the vechile I worked on which had it's original filter. Yea I just put the throttle body to the side removing the 4 bolts, then removing those Allen bolts which now I was able to get to the 2 bolts to lift up injectors. 💯💯

    • @datboidominican
      @datboidominican 5 ปีที่แล้ว +1

      @@pedroornelas1962 good stuff man. Was the motor having misfires or just modding the vehicle?

    • @pedroornelas1962
      @pedroornelas1962 5 ปีที่แล้ว +1

      @@datboidominican having misfires, it's my cousins vehicle that I help him out with, but he never mentioned that the spark plugs and wires are old, so I told him that's the next thing to replace

  • @billel4984
    @billel4984 ปีที่แล้ว

    Hi Peter...... The same Corolla 1995 with 250k miles runs for 20mn then shut off and doesn't want start again....I almost replaced everything....even the engine computer but still the same.
    I want replace the fuel injectors....
    Any other idea?

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  ปีที่แล้ว +1

      I bet, that piston compressions are low. Check this test: th-cam.com/video/yTMU6oEifnE/w-d-xo.html

  • @albertoangelesgarcia4580
    @albertoangelesgarcia4580 2 ปีที่แล้ว

    Hola buen día, mi Corolla 94 baña las bujías de gasolina, podrían ser los inyectores?

  • @markussitwirasaddam9044
    @markussitwirasaddam9044 5 ปีที่แล้ว

    Thanks for your help.to morrow.will have that work.

  • @briancouture6033
    @briancouture6033 8 ปีที่แล้ว +2

    nice videos man .

  • @siregg123456
    @siregg123456 6 ปีที่แล้ว

    Question! What cc are the injectors? Been trying to find info but can't find it anywhere

  • @futumu235
    @futumu235 ปีที่แล้ว

    Can you please show as the return and in of the Feul

  • @nevvalackin3469
    @nevvalackin3469 ปีที่แล้ว

    Does this work on geo PRIZM 1996

  • @reymagat4406
    @reymagat4406 2 ปีที่แล้ว

    is it better to replace all sir

  • @SKREVR
    @SKREVR 3 ปีที่แล้ว

    Hey Finn, what gaskets are needed for this job ?

    • @nelsona445
      @nelsona445 ปีที่แล้ว +1

      I know this is late but the Toyota dealer told me the 2 throttle body ones are essential to replace but the intake cover one isn't. I wanted to replace all of them anywhere but they didn't have stock of the intake one

  • @usamaabbasi117
    @usamaabbasi117 8 หลายเดือนก่อน

    whats the fuel consumption of your car

  • @giovannivargas1153
    @giovannivargas1153 6 ปีที่แล้ว

    I have a 1994 Toyota corolla and when it's cold the car won't start it has new wires spark plugs and distributor the whole pc had to be replaced because it was not working But now it won't start when cold Does it have a cold start sensor

  • @hectorlamar806
    @hectorlamar806 8 ปีที่แล้ว

    Peter, what are the symptoms of bad or dirty fuel injectors? Thanks.

  • @102wingnut
    @102wingnut 5 ปีที่แล้ว

    Not too familiar with Toyota engines... is this all about the same for the tercel (1994)? In US

  • @hshorganics9705
    @hshorganics9705 7 ปีที่แล้ว

    hello my friend! excellent video, thank you! any ideas for a misfire in cylinder 4? replaced plugs, wires, cap and rotor.

  • @cavalierabouhamma2828
    @cavalierabouhamma2828 4 ปีที่แล้ว

    It is very helpful, thank you so much.

  • @johnwaynebailey7808
    @johnwaynebailey7808 8 ปีที่แล้ว

    Very nice video. Thanks

  • @JDPlay25
    @JDPlay25 2 ปีที่แล้ว

    sir, what is the diameter of the injector Filter (Grommet)?

  • @asafgl4281
    @asafgl4281 3 ปีที่แล้ว +1

    I think you took to much of parts out...
    You ware only needed to release the fuel line , disconnect the injectors

    • @80milekyle70
      @80milekyle70 3 ปีที่แล้ว

      Well on that engine the intake manifold is in the way of removing one of the 2 bolts that secure the fuel rail. So you can get 2 or 3 of the 4 injectors out without taking more than one bolt out, but you can’t get that one on the right for sure

  • @christianlevarity1666
    @christianlevarity1666 6 ปีที่แล้ว

    my 1996 corolla wont start in the mornings, when i try to start it i could smell alot of gas or oil . ithink my injectors is leakin what should i do ?

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  6 ปีที่แล้ว +3

      Maybe valves leaks and piston rings too

    • @jerryc91
      @jerryc91 4 ปีที่แล้ว

      christian levarity I have a 97 that does the exact same thing and it’s only in morning a few times a week.....how did you end up fixing yours and what was the problem

    • @jerryc91
      @jerryc91 4 ปีที่แล้ว

      Peter if you read my above comment I am able to get it to start after about 6 cranks at 10 seconds a piece

  • @gregocr
    @gregocr 4 ปีที่แล้ว

    I am watching this 5 years later and it started to rain at the same moment of the video...

  • @teddsquickfix2060
    @teddsquickfix2060 4 ปีที่แล้ว

    hey i would like to know how to connect back the pipes

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  4 ปีที่แล้ว

      Thank You for comment. 👍😀

    • @NAA-sk1ov
      @NAA-sk1ov 2 ปีที่แล้ว

      @@PeterFinnTheCarDoctor that’s helpful

  • @bokaguri462
    @bokaguri462 6 ปีที่แล้ว

    thanks

  • @cw824
    @cw824 4 ปีที่แล้ว

    Wrong again, 98 to 2002 Corollas have a different engines. Change your title Pete.

  • @richardkwofie8923
    @richardkwofie8923 ปีที่แล้ว

    Hello

  • @jozepang4208
    @jozepang4208 3 ปีที่แล้ว

    why you taking out so many things and you only need to change fuel injector!

  • @steveakendo8579
    @steveakendo8579 5 ปีที่แล้ว

    My fuel injectors in this engine receive no power how do i solve that?

  • @asafgl4281
    @asafgl4281 5 ปีที่แล้ว

    I have a corolla terra 1998 1.6..
    I took out only the fule raile to take thevinjectors out....nothing more...

  • @keithkoury9483
    @keithkoury9483 2 ปีที่แล้ว

    good but not good for 1993

  • @kaokla8861
    @kaokla8861 2 ปีที่แล้ว

    វាមានអ្វីកើតឡើង