I owe you a huge gratitude of thanks for this video. I had a service stability system and check engine light come on at about the same time, and then my engine started tapping just like the one in your video. I was told that I had to have the engine replaced, and it would cost about $7k by a mechanic. After seeing this video, I made sure that all my coil wires were tight. Both errors went off, and the engine knock stopped. Thank you very much. Save me $7k for engine replacement and about $3k for rental car while truck would be getting fixed.
Sometimes a good mechanic has to be a better detective to find the true problem cause. Relevence can lead you to the root cause if you ask yourself relevant questions. You did just that with this truck. Excellent job!
Thank you Sir! You just saved my bro's bacon. He has a 2015 GMC Sierra and it has the same tick and he checked the spark plugs and found 1 loose one that once placed back on properly stopped the tick! Great stuff!
My 04 Z71 has 413k on it. Original engine, trans and rear. Yes I've done the rear main seal, axle seals and stayed on top of the maintenance since I got it at 178k. Gas mileage ain't what it used to be but I'm proud of that truck.
@jellydonut360 I'm replacing a rear end on a dodge 4x4 and I keep getting my ass saved by the internet so I've been publishing video of the project. Crazy but after getting the brush off by good mechanics I decided to just dive in. The tool bill...ouch
got a ticking 5.3 out in my driveway! Thank you for the tip, I saw your first video about it but was busy and didn’t end up watching it back then. Will be going out to do the quick fix now!
Those 1/2 ton Chevy trucks anytime you go over 33” tires that independent front will lose alignment regularly and cut the front tires … yes I’ve seen many people install torsion keys to lift the front and get them re-aligned and then after 6 months they are still cutting tires again it’s just they aren’t built heavy duty enough to have that heavy and large of tires and rims if you leave them with the stock size tires they come with they will last almost forever and wear the tires great.
The real question is? How many shops have installed lifters because of this? 😂 Sounds nothing like it but you never know nowadays….. Great video and great observation!
I have a 5.3 tore down now. 2 lifters quit pumping up and started off as a slight tapping. You can actually see the difference in the tops of the 2 pushrods where they were sloppy against the rocker arms. Sometimes it really turns out to be the lifters…
@@shadoughbanned I have done so many of the lifter jobs on GM AND Chrysler products too, Starting on a 5.7 Hemi pretty soon. If it fails silently, Lifters it is. As soon as it ticks, the cam is wrecked. On GM its usually an AFM lifter. On Ram 5.7 its usually intake cylinder 3. Which is not MDS (AFM) lifter. On both manufacturers cylinders 1,4,6,7 are the deactivated cylinders.
I just bought a 1500 GMC thinking the lifters were bad, after seeing this video, sure enough all spark plugs were loose. The seller did say he just installed new spark plugs and cables. He didn’t tighten them correctly. Thanks for this video
I’ve been problem free engine wise (knock on sheet metal) on a 2011 Silverado with an AFM 5.3 and I’ve been running corn squeezins (E85) for the majority of the last 2.5-3 years (huge cost difference in CA). I’m about 3 oil changes from 500K on it (miles). In my experience I believe that a large percentage of AFM issues are related to oil quality, change interval and treating changing the oil like surgery. I always change it hot, and I wipe down everything remotely close to an opening and make sure things like funnels etc are clean and use new or laundered rags. FWIW too, this guy is great, with his honest attitude and savvy he’s going to have to disappear to retire 🤣
Thanks Kenny. This video is exactly what was wrong with my 15 5.3l ltz I had no engine light, no off oil pressure or over heating. I second I heard this noise sounded exactly like mine an it was an now all is good!
Judging from the way that sheet metal was pushed back, I would say that the front bumper was replaced at some point in time. And, it looks like, a front end collision may have thrown the tires out of alignment. I would send him to a frame shop, to at least have it set up and measured. If either frame rail has been mashed or swayed or has an out of level condition. It will affect the sai, steering access inclination. (Steering wheel returns to center.) Which is all three, tow, camber, castor, set properly. Any one of those three, can cause excessive tire wear. I've also seen in the past, where the alignment shops have cranked up the torsion bars. To create the illusion that the frame is straight. And don't think just because you have a big Chevy truck, that you have a heavy duty frame on there. That is not the case at all. The frame on those trucks is just enough to get it down the road. There's nothing special about them. They're pretty much at one size fits-all program.
@@truckingoover ... You won't have to replace the frame. They're pretty workable. As long as they're not rotted out in the seams. A good frame and alignment shop with a good measuring system be able to straighten that puppy back out no problem. And if you do a return of cost benefit analysis on it, you're not just saving tires. You're also saving ball joints tie rod ends shocks and brakes. Brakes are the most important. Because you want the brakes functioning on all four corners the way they're supposed to. The biggest part of that is making sure that the wheel is where it is supposed to be. As a former Mr Goodwrench, service technician. I would hate for you to reach down for that brake pedal someday, and it not be there.
I bought a brandnew 2018 Chevy 1500 LT. 4 yrs ago. First set of tire wears are almost the same, front driver side tire is more bald than the other side. Tire people telling me, do you always turn left??? Hahaha, but yah he made me believe it. Truck is my daily ride, route always more with left turns. Lol. More frequent alignment and tire rotations prevented the obvious wear on one tire.
I got 270k miles on mine. Been tapping for at least the last 100k. I took off heads (had leaking head gasket) , did VLOM mod and re seated the valves. New guides, and sanded the heads to .001 with a piece of glass and sandpaper. Cam was good, lifters were good. Been 5k miles after repair and all is good. Crazy what these engines will go through..
Yes they are way more durable than any Dodge or Ford engine today. they are not 800HP flashes in the pan, they are meant to last you ten years or more, just like the 1st gen small-blocks. I'm not nuts about too much aluminum but these seem great. I have a 2011 I got last year and it's beautiful, a Vortec head engine. they all seem to have a low knock when started, not from lifters, it's lower frequency in tone. could be related to the variable valve timing (?) but it seems to go away and not cause any issues. the tradeoff is a superb engine that will perform and last a very long time. I got my 1st mechanic job in 1984...
I did,thank you...I have a 2002 ,mine tick first start up with 160k mile ,after warm up it disappear, it gets close to 18 mpg on high cruze set...no complaints
My 09, 5.3, barely started ticking and dealer replaced Cam and lifters at 4 years 364 days, under warranty, 60k miles. Didn’t tap that bad. Technician said he replaced lifters with LS7 lifters. 135K miles and no problems. Been using Mobile 1 since day one.
5.3s notorious for broken GM exhaust manifold bolts. I had one a few years ago and replaced them all with stainless . I believe there are kits out there
There is also a company that makes a bracket front/back L/R that wraps around the ends of the exhaust manifolds & draws them in on the gasket. It works well until the gasket is too deteriorated.
2015 Chevy Silverado with the same "Tapping Noise" with a the feeling of a misfire with no codes. I changed my spark plugs and wires about a year ago. This issue started about 3 months ago and thought the worse. Just found this video and went out and checked the wires and found the same issue. Thank you for posting this. My conclusion is that the metal prong inside the wires boot is lose.
Ive had my 2008 Chevrolet 4X4 for 7 years and it rurn me into mechanic . 4.56 gears , beefed up transmission with Teflon pads 3 to 4 pin , heavy vales job. Rebuild 5.3 with big cam, springs lifters . 430 hp and just put new coils , airmass flow, plugs , wires , o2 , map,evap , radiator, fans , larger transmission cooler , new A/C , heater coil , head lights, belts , pully , door controls , fuel pump.
Real master of deduction 💯I got a 2017 that gives me that Shutter, misfire, loss of communication(I replaced master control switch haven't fixed it) Harsh tire wear after a front end colission.
I recently fixed a ticker 2007 silverado. It was a loose sparkplug i can literally see it moving up and down as the cylinder fired against it . . crazy! Tightened spark plug and fixed the problem
Check out the comments on this video & the other ticking video. Other techs had interesting finds on their vehicles. Thanks for watching & keep wrenching 🔧
I have had the bolt retainer clip on the steering shaft pull the plug wire off if it isn't turned to one side a bit, it happened the last time it got a tune-up, it was the wire behind the one you found loose.
I had this happen to my LS1, it even sounded like a spark jump vs a mechanical tap. When I purchased my 2K Vette it had a similar sound on cold start for about 10 seconds, number 5 plug was loose. Tightened it and it made the noise you had in the start of the video. I had unknowingly pulled the wire out of the coil slightly when pulling the hard to get off spark plug end. I knew I had no tap before and with my face right there I could hear it pretty clear. Snapped the coil end securely, end of tick.
has it always been number 3 cyl wire that fell out? Has the issue always been on drivers side of the engine? Could it be when engine torques over to right side the wire pulls out.? would a 2 inch longer wire fix the issue?
The ONLY device on the PCM LIN bus is the auto grill shutter. Mine failed at 105k miles with no accidents. You will find a plethora of shutter replacements videos on TH-cam.
my 2003 Tahoe has an additional AC compressor belt and tensioner. Both wear quickly because of the location. When the belt looses resilency and tensioner get rusty it sounds like a valve tap.
it could be the tires themselves are defective,, alot of tires are being made in the phillipines and they are junk. I have a set of yokohamas on my van,, ok one of the got a nail in it and couldnt be fixed, so discount tire replaced it with a yokohama made in the new plant in the phillipines,. the original set was made in the USA... , it started feathering badly, it was on the back, and when they rotated my tires they put it on the front and the van started pulling to the right,, so I told them I wanted a tire made in the usa.. they replaced the tire with a new goodyear, and its doing great so far. DIscount tire likes to replace tires under road hazzard with cheap knock off tires made in third world countries.. they did the same thing when one of my hankook dynapros went bad, the tire they replaced it with looked exactly the same, but it was a shitty house brand.,, now I know how they operate and will insist on the exact replacement tire, or get a refund.. if u need a replacement tire under warranty, call first and ask if they have them in stock,, THEN tell them u need a tire replaced under warranty.. if u tell them u need a tire replaced right off the bat, they will likely say they dont have any in stock, but they have a "compatible" replacement tire for you,, and will try to give u a shit tire.
@@Biosynthnut yep, just dont always assume a tire wear issue is always something besides the tire itself. with my van, the bad tire was on the LEFT front and it was pulling to the RIGHT,,. almost sent me down a rabbit hole until I felt the tire.. discount tire had rotated them a week before, and they didnt catch the tire coming apart. if I had assumed they did thier job and checked all my tires, I would have naturally thought it was something besides the tire,, I DONT TRUST ANYONES WORK OR OPINION ANYMORE.. I always check for myself.. most people have thier head in thier ass nowdays and are distracted by a damned I phone.
I have an F150 with a 4.2 V5. It had a hydro lock and afterward developed a ticking sound. Turns out the rod was bent and the big end was turned just enough to kiss the piston skirt.
I've had the same thing happen on my 2018 Silverado V6 and 2018 Camaro SS. I don't know if it is the strength of the spark or what, but it has happened various times. Thanks for your videos.
I have a 2000 GMC with a 5.3 with 2,75000 miles on it and just have noticed a little ticking but I’ve never had any major problems with it. All a 5.3 is is the old 327 engine.
All the LS/LT engines (3rd, 4th, 5th gen) share with the 1st gen smallblock is the bore spacing. A 5.3 is 325CI and has a completely different bore and stroke, it just happens to be a similar displacement to a 327.
This is obviously a common problem. I had that exact same problem with my 2014 Sierra sle 1500. Also on a 5.3 liter engine and also the same cylinder. I knew exactly what the problem was as soon as I heard it, as this happened 3 or 4 times. I am pretty sure that the issue is that the wire is just a little too short and loosens from tension.
I recently found out that what happens is the boot is such a tight fit , that the air gets trapped inside and with heat , if the air doesn't come out on its own , the expansion from heat forces the boot off.
@@WrenchingWithKenny maybe that is what happened to my 2014. I changed the plug wires a month ago, and a couple weeks ago one popped right off on me(cylinder 5), and found a second one that was also coming off. i was using aftermarket plug wires and thought maybe it was the wires themselves, but if this is happening even with OEM plugs.......
Just had the same plug wire come off on our of our customers truck today. Found it quick as I've heard that arc sound many times in the past with mouse eaten plug wires and such.
I dont know this man's prices, but no one pays for knowledge, we want things done for cheap, but also not to be taken advantage of. Kind of a catch 22.
The coil wire happened to mine. Slight rough idle and hard to hear tick with the purge valve up front. Remembered the earlier video and got it. Also the tip with coil pack saved me too!
I'll add one to the mix... If you park with the nose up ,like my neighbor was because of his driveway, the oil pump is not happy about it after a while. We listened ,we scoped ,he took it to places ,they did the same, nothing... Randomly he noticed it wasn't quite as bad when he parked turned around, nose down. within a day the noise was gone, that's at least 40,000 miles ago the way he uses it. So just one more random tick thing to be aware of.
This was a good video to keep on the back burner for the oil “I seen this TH-cam video once” Then reach down and plug it in with the lightning pack still connected😂
That's spark jumping. That communication code is from the misfire. Maybe he jumped someone else. I think maybe you worry too much. Clear the codes and see what happens
my 2014 did that a couple weeks ago after i put the new plug wires on. the old ones were on there solidly. perhaps they changed something on the wires themselves?
Good call on that engine noise. As soon as you lifted the hood I could hear it sounded more like a "snapping" noise like a bad plug wire I guessed. But you showed the loose wire! WOW, do owners actually put 0w-20 oil in these engines like it showed on the oil fill cap!? I never go below 5w-30 in mine. Auto manufacturers are sacrificing our engines life in the search for higher CAFE Fuel milage numbers to me Regulation and impress the buyers.
Most people really don't know anything and let shops or quick lube place change their oil . Most shops or QL places will use what the manufacturer recommends unless the customer requested different. If the receipt shows one weight , and the vehicle calls for another , then that's a potential claim if something were to happen to the motor . Especially in NY where I spent most my life . The DMV doesn't play in that state . If a customer files a complaint with the DMV and says , let's say , that their DOD lifter failed (common failure) because the shop used the wrong weight oil, the DMV will investigate and they could hold the shop liable for tge repair!!
Yup, wires coming off is not a super common issue but it does happen enough for a TSB! There's also a TSB for the radiator shutter wire getting pinched, and needs to be rerouted, or replaced if rubbed through.
People are nuts. as soon as I buy a used vehicle I throw money at it. right away I first changed my plugs, wires and all the grounds which are an issue on these. then I popped in a thermostat and a new master switch for the power windows. and on it goes.. ordered tires from Walmart 😉
Just to let you know I have a 6.2 L Chevy Silverado and I had a lifter failure the lifters collapsed so yes they are out there they do happen I fought with the company they tried to just replace the two different lifters that failed but eventually I had them replace all 16 so that's something you need to look at when they do fight you on this you need to have all 16 replaced not just one or two good luck
If they replaced those 16 with the same type, guess what? They put a bandaid on a bullet wound! Turn off your AFM\DFM, all depending on which one you have. That's the only way to be sure that your lifters won't stick in the collapsed position (what they do during cylinder deactivation) and then not pop back up.
We went through that they identified the lot part number that was bad so they did not replace them with that particular Lot number they replaced them with a known Lot number or part number that were considered good they have identified the malfunctioning lifters yes I had to go around and around with them on that to make sure they didn't stick bad lifters back in there the same Lot number and part number as the ones that were in there that were defective
@@waynec211 And you believe that? GM has been having the lifter issue for years. Unless they changed parts supplier, I wouldn't take it on any long trips. Like I'd said though, if you disable your fuel management system, which can be done right from your dash, then you'll run the risk of it happening once again. You may notice up to 1 mpg difference in your fuel economy, which to avoid it happening again, sure seems worth it. Ask yourself this, if GM knew it was just a certain lot number of them that were causing the issue, why have they still been installing them in their 5.3L and 6.2L V-8s for the last ten years? Only thing I don't get, is why they haven't changed suppliers by now.
Yes I was considering disabling the fuel management system I had heard that could be possible problem too so who knows what the hell to believe but I guess I will look into disabling this fuel management system I don't like it anyway it's annoying
Big trucks and SUV that take 0w-20, I live in a warmer climate all rear round and use 5w-30 instead and seems too work a lot better. For example 2022 BMW x3 takes 0w-20 but it’s never reached below 50 and 5w-30 seems to make the engine smoother and quieter
I had 17' silverado with the 5.3 z71 and around 100,000 miles i had a dead miss on #3. I ended up changing the plugs and in the process found the #3 plug wire was broken internally. Fast forward a month or so had the exact same issue twice but with the aftermarket wires from the parts store. Just outa Curiosity can you put a dab of Dialectic grease both ends of the plug wire to help?
Yes. The dialectric grease can be used on both ends without issue. In all honesty though, I tend not to use it on ends that are close to the exhaust as I've found they seem to really get stuck onto the plug and subsequently tear when removing . This usually seems to be the issue for me after many miles however
Had this happen on my #7 on my 5.3L as well. Misfire only happened at high speeds and was random but not enough to trigger a code. We thought it was the transmission slipping when accelerating. Honest transmission shop owner drove it and in 1 min said “this is not a transmission, but i have a hunch”. Took a look under the hood and found it, Plugged it back in and hasnt been a problem since. Guy refused to let me pay him.
Check your exhaust manifold bolts, they tend to shear the bolt heads off of the ones closest to the firewall. It'll have the "Tic tic tic" and it will fade out after a while. If you lose enough of the manifold bolts you'll start to get that lawnmower sound. Or it could be the classic Chevy piston slap noise from engine wear. The pistons will rattle around in their bores until everything warms up and expands slightly.
Question… Can clogged catalytic converter cause engine temp to start rising over operating temp when in highway speeds. In town normal temp. 2014 GMC sierra 5.3
We have a 17-passenger bus with a similar engine (6.0 liter, I think). The suspension is inappropriate for the conditions it is operated under (air bags). The ride is extremely rough. It had a plug wire fall off. Makes me think that the accident may be the cause.
Happened twice to us too. The Chevrolet dealer said they fixed our rig. Turns out they put in the old parts that we just ordered and she got to Arkansas to have the lifters fail again. We got a new engine. Hate chevrolet.
I think the shutter blocks off airflow to the radiator to get the engine up to operating temperature quicker when it's cold outside not for aerodynamics.
I’ve got a u18a2 code they changed the fuel pump control module still check engine light then they Body control Module still check engine light could it be the ECM and help or advise please it’s a 2017 Chevy Silverado 1500 5.3
Being a "loss of communication" code. I would first verify the wiring . The B+ or ignition circuit could be shorted to ground or have an open/high resistance. The Accessory wake up serial data line or ground circuit could have an open/high resistance . Check there first
Hi, i have a "05" Tahoe with 176,000 on it +it just started ticking when first started then quiets down when warm. Dealer said a new cam + lifters are $9,000 bucks. I'm blown away. Any thoughts???
Wow! For that price you could probably get a new motor! Post your question to our Facebook page Wrenching with Kenny & Backyard Mechanics - they are closed sure to answer the questions to join. Add the year, make & model of the vehicle & what you have done to fix the issue. Other mechanics will comment with their thoughts. Keep wrenching 🔧
@@WrenchingWithKenny Dealer also said a new engine is 12,000 or so. I've always changed oil at 3000 miles. The tick does go away after warm up . Should i just run it × see what happens?? Gotta say the worst chevy i've ever owned. It's had excellent care + has caused me nothing but grief. I will not buy another + especially with AFM crap! Thanks for help
I owe you a huge gratitude of thanks for this video. I had a service stability system and check engine light come on at about the same time, and then my engine started tapping just like the one in your video. I was told that I had to have the engine replaced, and it would cost about $7k by a mechanic. After seeing this video, I made sure that all my coil wires were tight. Both errors went off, and the engine knock stopped.
Thank you very much. Save me $7k for engine replacement and about $3k for rental car while truck would be getting fixed.
Dang good mechanic right here. Honest and knows his stuff 🫡
Sometimes a good mechanic has to be a better detective to find the true problem cause. Relevence can lead you to the root cause if you ask yourself relevant questions. You did just that with this truck. Excellent job!
That is literally the definition of a mechanic. The other person is simply a parts changer.
Thank you Sir! You just saved my bro's bacon. He has a 2015 GMC Sierra and it has the same tick and he checked the spark plugs and found 1 loose one that once placed back on properly stopped the tick! Great stuff!
Sounds just like mine does
was it on the drivers side of engine?
My 04 Z71 has 413k on it. Original engine, trans and rear. Yes I've done the rear main seal, axle seals and stayed on top of the maintenance since I got it at 178k. Gas mileage ain't what it used to be but I'm proud of that truck.
Hell yea!
Great detective work and trobleshooting walk thru. Your a great mechanic to follow. Thanks for sharing your tips and years of experience with us.
Your like an auto detective, most people wouldn't have thought of that
Subbed instantly. You sir know your shit. I'm very impressed with all of your observations under that hood. Truly watching a professional.
Couldn't agree with you more sir! Truly a professional 👏
Me toooo😂 Instantly! Love authentic people
I love how detailed your investigation was. Freaking art. I wish I knew how cars worked.
So stop wishing and start Learning.
It's honestly not that hard, spend a day on TH-cam and you'll find out how simple it all is.
@jellydonut360 I'm replacing a rear end on a dodge 4x4 and I keep getting my ass saved by the internet so I've been publishing video of the project.
Crazy but after getting the brush off by good mechanics I decided to just dive in.
The tool bill...ouch
We always called it spark jumping. Good job recognizing it
got a ticking 5.3 out in my driveway! Thank you for the tip, I saw your first video about it but was busy and didn’t end up watching it back then. Will be going out to do the quick fix now!
Lol was it that ?
@@johnnyninetytwo apparently not
@@johnnyninetytwo😂😂😂
The tire wear is indicative of cranking up torsion bars or installing a leveling kit. Any time the suspension is touched it needs an alignment.
Those 1/2 ton Chevy trucks anytime you go over 33” tires that independent front will lose alignment regularly and cut the front tires … yes I’ve seen many people install torsion keys to lift the front and get them re-aligned and then after 6 months they are still cutting tires again it’s just they aren’t built heavy duty enough to have that heavy and large of tires and rims if you leave them with the stock size tires they come with they will last almost forever and wear the tires great.
This is exactly my noise! The dealer said it takes 3 weeks to look at it! I'm about to go over there and check my coil! You sir earn a new sub!!
Thank you !! Let me know what you find !
The real question is? How many shops have installed lifters because of this? 😂 Sounds nothing like it but you never know nowadays….. Great video and great observation!
I have a 5.3 tore down now. 2 lifters quit pumping up and started off as a slight tapping. You can actually see the difference in the tops of the 2 pushrods where they were sloppy against the rocker arms. Sometimes it really turns out to be the lifters…
@@shadoughbanned I have done so many of the lifter jobs on GM AND Chrysler products too, Starting on a 5.7 Hemi pretty soon. If it fails silently, Lifters it is. As soon as it ticks, the cam is wrecked. On GM its usually an AFM lifter. On Ram 5.7 its usually intake cylinder 3. Which is not MDS (AFM) lifter. On both manufacturers cylinders 1,4,6,7 are the deactivated cylinders.
Rainman ray would've figured it out. Go watch his videos. He's a genius at this sh*t.
I’ve had to coils go out on mine and paid the dealer a good bit to replace them. Something tells me I got screwed.
@@petemoore8923 Dealer screwed you? No way. That never happens. Car dealers are nearly as honest as lawyers.
I just bought a 1500 GMC thinking the lifters were bad, after seeing this video, sure enough all spark plugs were loose. The seller did say he just installed new spark plugs and cables. He didn’t tighten them correctly. Thanks for this video
I’ve been problem free engine wise (knock on sheet metal) on a 2011 Silverado with an AFM 5.3 and I’ve been running corn squeezins (E85) for the majority of the last 2.5-3 years (huge cost difference in CA). I’m about 3 oil changes from 500K on it (miles). In my experience I believe that a large percentage of AFM issues are related to oil quality, change interval and treating changing the oil like surgery. I always change it hot, and I wipe down everything remotely close to an opening and make sure things like funnels etc are clean and use new or laundered rags. FWIW too, this guy is great, with his honest attitude and savvy he’s going to have to disappear to retire 🤣
Like your teachability . Very informative. Thank you.
That ticking/snapping is unique ..I knew what it was as soon as I heard it ....
No you didn't.
@@GripFreak it’s pretty easy to differentiate the tick you’re probably just too slow for that💀
@@GripFreak yeah its pretty common sense
@@GripFreak Clear difference between an electrical snap and a cam tick.
I did too since the difference with electric tap and Metal tap
Thanks Kenny. This video is exactly what was wrong with my 15 5.3l ltz I had no engine light, no off oil pressure or over heating. I second I heard this noise sounded exactly like mine an it was an now all is good!
I got a kick out of the smile on your face when you opened the hood. (Yep! ! ! ! ! ! I know what that is, , , , , )
As soon as I heard it , I knew what it was !!! It's a distinct sound that's etched in my brain lol !
I think you are honest but but some of them would act like it lifted or something and they did charge all that not done nothing
Judging from the way that sheet metal was pushed back, I would say that the front bumper was replaced at some point in time. And, it looks like, a front end collision may have thrown the tires out of alignment. I would send him to a frame shop, to at least have it set up and measured. If either frame rail has been mashed or swayed or has an out of level condition. It will affect the sai, steering access inclination. (Steering wheel returns to center.) Which is all three, tow, camber, castor, set properly. Any one of those three, can cause excessive tire wear. I've also seen in the past, where the alignment shops have cranked up the torsion bars. To create the illusion that the frame is straight. And don't think just because you have a big Chevy truck, that you have a heavy duty frame on there. That is not the case at all. The frame on those trucks is just enough to get it down the road. There's nothing special about them. They're pretty much at one size fits-all program.
Definitely looks hit.
Lol. Just good enough to get down the road
Or just rotate the tire more often before you buy a new frame
@@truckingoover ... You won't have to replace the frame. They're pretty workable. As long as they're not rotted out in the seams. A good frame and alignment shop with a good measuring system be able to straighten that puppy back out no problem. And if you do a return of cost benefit analysis on it, you're not just saving tires. You're also saving ball joints tie rod ends shocks and brakes. Brakes are the most important. Because you want the brakes functioning on all four corners the way they're supposed to. The biggest part of that is making sure that the wheel is where it is supposed to be.
As a former Mr Goodwrench, service technician. I would hate for you to reach down for that brake pedal someday, and it not be there.
I bought a brandnew 2018 Chevy 1500 LT. 4 yrs ago. First set of tire wears are almost the same, front driver side tire is more bald than the other side. Tire people telling me, do you always turn left??? Hahaha, but yah he made me believe it. Truck is my daily ride, route always more with left turns. Lol. More frequent alignment and tire rotations prevented the obvious wear on one tire.
I got 270k miles on mine. Been tapping for at least the last 100k. I took off heads (had leaking head gasket) , did VLOM mod and re seated the valves. New guides, and sanded the heads to .001 with a piece of glass and sandpaper. Cam was good, lifters were good. Been 5k miles after repair and all is good. Crazy what these engines will go through..
Yes they are way more durable than any Dodge or Ford engine today. they are not 800HP flashes in the pan, they are meant to last you ten years or more, just like the 1st gen small-blocks. I'm not nuts about too much aluminum but these seem great. I have a 2011 I got last year and it's beautiful, a Vortec head engine. they all seem to have a low knock when started, not from lifters, it's lower frequency in tone. could be related to the variable valve timing (?) but it seems to go away and not cause any issues. the tradeoff is a superb engine that will perform and last a very long time. I got my 1st mechanic job in 1984...
@@dbspecials1200 They 5.0 coyote shits on the 5.3 in reliability
I've been told the piston skirts will tap against the cylinder walls causing a sound when they are cold.
Are you sure about that@@waterloo123100
I did,thank you...I have a 2002 ,mine tick first start up with 160k mile ,after warm up it disappear, it gets close to 18 mpg on high cruze set...no complaints
My 09, 5.3, barely started ticking and dealer replaced Cam and lifters at 4 years 364 days, under warranty, 60k miles. Didn’t tap that bad. Technician said he replaced lifters with LS7 lifters. 135K miles and no problems. Been using Mobile 1 since day one.
Ls7 lifters? I'll keep that in mind if mine ever fails.
@@____MC____ He could have been pulling my leg.
Your like the Sherlock of diagnosis, that can save you and your clients a lot of time and money. Great job.
Thank you for your kind words. I appreciate you. Keep wrenching 🔧
5.3s notorious for broken GM exhaust manifold bolts. I had one a few years ago and replaced them all with stainless . I believe there are kits out there
There is also a company that makes a bracket front/back L/R that wraps around the ends of the exhaust manifolds & draws them in on the gasket. It works well until the gasket is too deteriorated.
Check for broken manifold bolts as well. Had 2 rear broken ones on my 2014. Kenny has other vids on that diagnosis. Thanks Ken!!
2015 Chevy Silverado with the same "Tapping Noise" with a the feeling of a misfire with no codes. I changed my spark plugs and wires about a year ago. This issue started about 3 months ago and thought the worse. Just found this video and went out and checked the wires and found the same issue. Thank you for posting this. My conclusion is that the metal prong inside the wires boot is lose.
was the issue with wires on drivers side of engine only? cyl 1,3,5,7.
What a great video!
Very informative
Process of elimination as my dad always showed me to work on my cars!!!
Thank you .A lot of help.Thats why my truck was missing .Would not start good on hot weather.
Great fix! Wish he was my neighbor 😅
Ive had my 2008 Chevrolet 4X4 for 7 years and it rurn me into mechanic . 4.56 gears , beefed up transmission with Teflon pads 3 to 4 pin , heavy vales job. Rebuild 5.3 with big cam, springs lifters . 430 hp and just put new coils , airmass flow, plugs , wires , o2 , map,evap , radiator, fans , larger transmission cooler , new A/C , heater coil , head lights, belts , pully , door controls , fuel pump.
Real master of deduction 💯I got a 2017 that gives me that Shutter, misfire, loss of communication(I replaced master control switch haven't fixed it) Harsh tire wear after a front end colission.
only have watched a few of your vids so far, but you are chalk full of great little tips and insights.
@followyourbliss101 Thank you for your kind words. Keep wrenching! Kenny
Great vid.
Still suprises me that people dont even open hood to check.
Vibrating lead.
Tires defo looks like front end bump.
Bent something.
Good old American know how and roll up your sleeves blue collar work. You're a dying breed Kenny.. appreciate your channel and just subbed.
I recently fixed a ticker 2007 silverado. It was a loose sparkplug i can literally see it moving up and down as the cylinder fired against it . . crazy! Tightened spark plug and fixed the problem
THANK YOU THANK YOU THANK YOU.🙏🏿 Saved my butt today 2014 GMC Sierra 5.3 4 inch lift ….
Just got an 05 avalanche from a friend with that ticking.. will have to check that wire.. thanx for the vid brother
Check out the comments on this video & the other ticking video. Other techs had interesting finds on their vehicles. Thanks for watching & keep wrenching 🔧
was the wire the issue? and was it a wire on the drivers side of engine?
Excellent video, great content , your sharing of experience is worth thousands of dollars!
I have had the bolt retainer clip on the steering shaft pull the plug wire off if it isn't turned to one side a bit, it happened the last time it got a tune-up, it was the wire behind the one you found loose.
My 2017 Silverado had the same problem it got pulled off multiple times before I figured it out that it was the clip on the steering shaft
I had this happen to my LS1, it even sounded like a spark jump vs a mechanical tap. When I purchased my 2K Vette it had a similar sound on cold start for about 10 seconds, number 5 plug was loose. Tightened it and it made the noise you had in the start of the video. I had unknowingly pulled the wire out of the coil slightly when pulling the hard to get off spark plug end. I knew I had no tap before and with my face right there I could hear it pretty clear. Snapped the coil end securely, end of tick.
Great video, Kenny.
5.7 never let me down nor missed a beat
You are one great mechanic. 👍
has it always been number 3 cyl wire that fell out? Has the issue always been on drivers side of the engine? Could it be when engine torques over to right side the wire pulls out.? would a 2 inch longer wire fix the issue?
U1510 sets when the shutter actuator takes a dump. U1510 is LIN BUS and the shutter has LIN BUS line to it. Replacing the shutter resolves the issue.
The ONLY device on the PCM LIN bus is the auto grill shutter. Mine failed at 105k miles with no accidents. You will find a plethora of shutter replacements videos on TH-cam.
my 2003 Tahoe has an additional AC compressor belt and tensioner. Both wear quickly because of the location. When the belt looses resilency and tensioner get rusty it sounds like a valve tap.
Had a 2020 Silverado with 47k on it.
Tires were trashed. Chopped up, feathering in the front, alignment wear. complete squared off on the rear.
it could be the tires themselves are defective,, alot of tires are being made in the phillipines and they are junk. I have a set of yokohamas on my van,, ok one of the got a nail in it and couldnt be fixed, so discount tire replaced it with a yokohama made in the new plant in the phillipines,. the original set was made in the USA...
, it started feathering badly, it was on the back, and when they rotated my tires they put it on the front and the van started pulling to the right,, so I told them I wanted a tire made in the usa.. they replaced the tire with a new goodyear, and its doing great so far. DIscount tire likes to replace tires under road hazzard with cheap knock off tires made in third world countries.. they did the same thing when one of my hankook dynapros went bad, the tire they replaced it with looked exactly the same, but it was a shitty house brand.,, now I know how they operate and will insist on the exact replacement tire, or get a refund.. if u need a replacement tire under warranty, call first and ask if they have them in stock,, THEN tell them u need a tire replaced under warranty.. if u tell them u need a tire replaced right off the bat, they will likely say they dont have any in stock, but they have a "compatible" replacement tire for you,, and will try to give u a shit tire.
@@randy1ization Possible. Looks like he never rotated them or balanced them. The one I worked on.
@@Biosynthnut yep, just dont always assume a tire wear issue is always something besides the tire itself. with my van, the bad tire was on the LEFT front and it was pulling to the RIGHT,,. almost sent me down a rabbit hole until I felt the tire.. discount tire had rotated them a week before, and they didnt catch the tire coming apart. if I had assumed they did thier job and checked all my tires, I would have naturally thought it was something besides the tire,, I DONT TRUST ANYONES WORK OR OPINION ANYMORE.. I always check for myself.. most people have thier head in thier ass nowdays and are distracted by a damned I phone.
I have an F150 with a 4.2 V5. It had a hydro lock and afterward developed a ticking sound. Turns out the rod was bent and the big end was turned just enough to kiss the piston skirt.
They must be making em cheaper I've has 5.3s with 400k
What year is yours? I have an 2001 with a 5.3,175 k. Its been an awesome truck.
@@Mr.wilson949 I got a 02 tahoe with 230k miles
I have 800,000kms on my 2014 5.3 and it still goes strong
After AFM they went in the dump
What year you have?
Guess i will check this once go back to work monday. See if that causing the ticking noise.
I've had the same thing happen on my 2018 Silverado V6 and 2018 Camaro SS. I don't know if it is the strength of the spark or what, but it has happened various times. Thanks for your videos.
Eric O at south main auto just replaced one of those shutter assemblies and it was a pita to do.
My 08 5.3 has 180k and has been a good work truck. Tows over 5000 lbs daily
Dam😅
I have a 2000 GMC with a 5.3 with 2,75000 miles on it and just have noticed a little ticking but I’ve never had any major problems with it. All a 5.3 is is the old 327 engine.
Yeah 5.3s comes out to 322CI I believe so basically a 327. Great motors I know that much.
@@bubbakushingtonIII I was told it is 325 cubic inches but you could be right but whatever the case it’s basically the old 327.
All the LS/LT engines (3rd, 4th, 5th gen) share with the 1st gen smallblock is the bore spacing. A 5.3 is 325CI and has a completely different bore and stroke, it just happens to be a similar displacement to a 327.
@@brockemery493 Thank you I was just going by what I’ve been told you can write what I know about engines on a bubble gum wrapper lol.
Don’t you ever compare these late model Chevy boat anchors to the old school Chevy engines!!!!!
This is obviously a common problem. I had that exact same problem with my 2014 Sierra sle 1500. Also on a 5.3 liter engine and also the same cylinder. I knew exactly what the problem was as soon as I heard it, as this happened 3 or 4 times. I am pretty sure that the issue is that the wire is just a little too short and loosens from tension.
I recently found out that what happens is the boot is such a tight fit , that the air gets trapped inside and with heat , if the air doesn't come out on its own , the expansion from heat forces the boot off.
GM likes tight harnesses. The things they do to save a penny. Either that or their engineers need to learn about wiring.
@@WrenchingWithKenny maybe that is what happened to my 2014. I changed the plug wires a month ago, and a couple weeks ago one popped right off on me(cylinder 5), and found a second one that was also coming off. i was using aftermarket plug wires and thought maybe it was the wires themselves, but if this is happening even with OEM plugs.......
Just had the same plug wire come off on our of our customers truck today. Found it quick as I've heard that arc sound many times in the past with mouse eaten plug wires and such.
Need more mechanics like you ken good work
I dont know this man's prices, but no one pays for knowledge, we want things done for cheap, but also not to be taken advantage of. Kind of a catch 22.
really cool, love to see mechanics ask why, rather than just fix n go.
The coil wire happened to mine. Slight rough idle and hard to hear tick with the purge valve up front. Remembered the earlier video and got it. Also the tip with coil pack saved me too!
cold start rough idle can also be the high pressure investors as well its covered up to 100k miles had it happen to my 2017 silverado
I just subscribed because Kenny knows his stuff!!!!!!
Where are you located? Ive taken my truck to 9 car shops and 3 dealerships and none of them can find the source of the tick
I'll add one to the mix...
If you park with the nose up ,like my neighbor was because of his driveway, the oil pump is not happy about it after a while. We listened ,we scoped ,he took it to places ,they did the same, nothing...
Randomly he noticed it wasn't quite as bad when he parked turned around, nose down.
within a day the noise was gone, that's at least 40,000 miles ago the way he uses it.
So just one more random tick thing to be aware of.
I have a new 2022 Silverado that does this on my inclined driveway, I now back up the drive to park and no ticking.
This was a good video to keep on the back burner for the oil “I seen this TH-cam video once”
Then reach down and plug it in with the lightning pack still connected😂
Why did the wire come out? Probably not clicked in when installed. Or maybe some one climbed in for other repair and pulled it off accidentally.
.
That's spark jumping. That communication code is from the misfire. Maybe he jumped someone else. I think maybe you worry too much. Clear the codes and see what happens
my 2014 did that a couple weeks ago after i put the new plug wires on. the old ones were on there solidly. perhaps they changed something on the wires themselves?
I've seen this multiple times in person, Same white to.
Good call on that engine noise. As soon as you lifted the hood I could hear it sounded more like a "snapping" noise like a bad plug wire I guessed. But you showed the loose wire!
WOW, do owners actually put 0w-20 oil in these engines like it showed on the oil fill cap!? I never go below 5w-30 in mine. Auto manufacturers are sacrificing our engines life in the search for higher CAFE Fuel milage numbers to me Regulation and impress the buyers.
Most people really don't know anything and let shops or quick lube place change their oil . Most shops or QL places will use what the manufacturer recommends unless the customer requested different.
If the receipt shows one weight , and the vehicle calls for another , then that's a potential claim if something were to happen to the motor . Especially in NY where I spent most my life . The DMV doesn't play in that state . If a customer files a complaint with the DMV and says , let's say , that their DOD lifter failed (common failure) because the shop used the wrong weight oil, the DMV will investigate and they could hold the shop liable for tge repair!!
I had a similar ticking coming out of my car when I was younger. Believe it or not it ended up being an exhaust leak at the manifold.
I have a 2018 z71 just had trans replaced luckily under warranty no charge 121.000 miles i dread motor doing tick
Yup, wires coming off is not a super common issue but it does happen enough for a TSB!
There's also a TSB for the radiator shutter wire getting pinched, and needs to be rerouted, or replaced if rubbed through.
People are nuts. as soon as I buy a used vehicle I throw money at it. right away I first changed my plugs, wires and all the grounds which are an issue on these. then I popped in a thermostat and a new master switch for the power windows. and on it goes.. ordered tires from Walmart 😉
Just to let you know I have a 6.2 L Chevy Silverado and I had a lifter failure the lifters collapsed so yes they are out there they do happen I fought with the company they tried to just replace the two different lifters that failed but eventually I had them replace all 16 so that's something you need to look at when they do fight you on this you need to have all 16 replaced not just one or two good luck
And then 4 more fail.
If they replaced those 16 with the same type, guess what? They put a bandaid on a bullet wound! Turn off your AFM\DFM, all depending on which one you have. That's the only way to be sure that your lifters won't stick in the collapsed position (what they do during cylinder deactivation) and then not pop back up.
We went through that they identified the lot part number that was bad so they did not replace them with that particular Lot number they replaced them with a known Lot number or part number that were considered good they have identified the malfunctioning lifters yes I had to go around and around with them on that to make sure they didn't stick bad lifters back in there the same Lot number and part number as the ones that were in there that were defective
@@waynec211 And you believe that? GM has been having the lifter issue for years. Unless they changed parts supplier, I wouldn't take it on any long trips. Like I'd said though, if you disable your fuel management system, which can be done right from your dash, then you'll run the risk of it happening once again. You may notice up to 1 mpg difference in your fuel economy, which to avoid it happening again, sure seems worth it. Ask yourself this, if GM knew it was just a certain lot number of them that were causing the issue, why have they still been installing them in their 5.3L and 6.2L V-8s for the last ten years? Only thing I don't get, is why they haven't changed suppliers by now.
Yes I was considering disabling the fuel management system I had heard that could be possible problem too so who knows what the hell to believe but I guess I will look into disabling this fuel management system I don't like it anyway it's annoying
Big trucks and SUV that take 0w-20, I live in a warmer climate all rear round and use 5w-30 instead and seems too work a lot better. For example 2022 BMW x3 takes 0w-20 but it’s never reached below 50 and 5w-30 seems to make the engine smoother and quieter
what's the obd2 scanning tool you have? make and model. would love to get one
I have the same code on mine, and it reads misfire too. I'm going to check that out.
I had 17' silverado with the 5.3 z71 and around 100,000 miles i had a dead miss on #3. I ended up changing the plugs and in the process found the #3 plug wire was broken internally. Fast forward a month or so had the exact same issue twice but with the aftermarket wires from the parts store. Just outa Curiosity can you put a dab of Dialectic grease both ends of the plug wire to help?
Yes. The dialectric grease can be used on both ends without issue. In all honesty though, I tend not to use it on ends that are close to the exhaust as I've found they seem to really get stuck onto the plug and subsequently tear when removing . This usually seems to be the issue for me after many miles however
Could the lin bus module issue be a possibie dead battery. I had a same thing happen with my 2018 chevy malibu that i used to have?
Happen in Mexico 2015 4.3L Spark plug wire came loose, misfire on hard throttle.
I've got a 5.3 that did that, it ended up being the o ring that seals the oil pick up tube to the pump. The o rings degrade from heat.
Had this happen on my #7 on my 5.3L as well. Misfire only happened at high speeds and was random but not enough to trigger a code. We thought it was the transmission slipping when accelerating. Honest transmission shop owner drove it and in 1 min said “this is not a transmission, but i have a hunch”. Took a look under the hood and found it, Plugged it back in and hasnt been a problem since. Guy refused to let me pay him.
Does the tick speed up with acceleration when it is electrical ? I would guess yes but am just starting to learn.
The black widow package is not exactly factory, it’s sent off to SCA Performance to get the kit installed!
I’ve got a ticking 5.3 on cold start. It’s loud and fades out after about 45 seconds. I’m assuming it’s lifter related?
It could be an exhaust leak . Check out this other video I made a few months ago . th-cam.com/video/itYFqSMdqmI/w-d-xo.html
Mines does the same thing..exhaust leak I'm sure of it
Check your exhaust manifold bolts, they tend to shear the bolt heads off of the ones closest to the firewall. It'll have the "Tic tic tic" and it will fade out after a while. If you lose enough of the manifold bolts you'll start to get that lawnmower sound.
Or it could be the classic Chevy piston slap noise from engine wear. The pistons will rattle around in their bores until everything warms up and expands slightly.
Quit lying guys, Chevys don't break exhaust manifold bolts....
Question… Can clogged catalytic converter cause engine temp to start rising over operating temp when in highway speeds. In town normal temp. 2014 GMC sierra 5.3
We have a 17-passenger bus with a similar engine (6.0 liter, I think). The suspension is inappropriate for the conditions it is operated under (air bags). The ride is extremely rough. It had a plug wire fall off. Makes me think that the accident may be the cause.
Got a tick on my 6.2....Wishful thinking that it's something like this or exhaust leak like u found in another videoA🤞🏼🤞🏼🤞🏼
You will figure it out. Keep wrenching 🔧
Did you ever find out what the ticking was in your 6.2
What about the Tire wear? Just needs an alignment?
I have a pretty loud tick when accelerating down the road but I can also kind of feel it in the pedal what would it be?
I have a real slow tick on mine but no check engine light. Any idea? Would it still be a plug wire….
Happened twice to us too. The Chevrolet dealer said they fixed our rig. Turns out they put in the old parts that we just ordered and she got to Arkansas to have the lifters fail again. We got a new engine. Hate chevrolet.
False
I've got a 2002 Suburban. Does not want to warm up in cold weather. Does it have a radiator shutter assembly?
Very interesting diagnosis.
I think the shutter blocks off airflow to the radiator to get the engine up to operating temperature quicker when it's cold outside not for aerodynamics.
I’ve got a u18a2 code they changed the fuel pump control module still check engine light then they Body control Module still check engine light could it be the ECM and help or advise please it’s a 2017 Chevy Silverado 1500 5.3
Being a "loss of communication" code. I would first verify the wiring . The B+ or ignition circuit could be shorted to ground or have an open/high resistance. The Accessory wake up serial data line or ground circuit could have an open/high resistance . Check there first
Cig liter fuse
Hi, i have a "05" Tahoe with 176,000 on it +it just started ticking when first started then quiets down when warm.
Dealer said a new cam + lifters are $9,000 bucks.
I'm blown away.
Any thoughts???
Wow! For that price you could probably get a new motor! Post your question to our Facebook page Wrenching with Kenny & Backyard Mechanics - they are closed sure to answer the questions to join. Add the year, make & model of the vehicle & what you have done to fix the issue. Other mechanics will comment with their thoughts. Keep wrenching 🔧
@@WrenchingWithKenny Dealer also said a new engine is 12,000 or so.
I've always changed oil at 3000 miles.
The tick does go away after warm up .
Should i just run it × see what happens??
Gotta say the worst chevy i've ever owned.
It's had excellent care + has caused me nothing but grief.
I will not buy another + especially with AFM crap!
Thanks for help
Whats this truck only doing it when it was cold or all the time?
All the time