Beats By Dre Solo 3 Broken Right Hinge Replacement Repair
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2018
- Repair the unit yourself 👉 bit.ly/2JMdV9g
1. Repair the Beats By Dre Solo 3 hinge yourself:
2. Remove the Muff
3. Remove the excess tape from the speaker
4. Unscrew the 3 speaker screws
5. Unsolder the speaker and micro USB charger port
6. Loosen up the wires
7. Pry apart the inside and outside panel
8. Remove the battery
9. Unscrew the main board
10. Pull out the main wire from the board
11. Pull the wires through the hinge
12. Remove the old hinge
13. Put on the new hinge
14. Pull the wire through the new hinge
15. Put the unit back together
16. Get back to jamming out 🎵
You can click the zero calorie link below to send your electronics in for repair:
www.joesge.com/pages/repair-s...
Feel free to reach out to our radical animal friendly support team with any questions your brain has developed during the watching or pre gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
If you are tired of pre gaming or talking with our radical animal-friendly support team, and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:
- Snapchat @joesge
- Instagram @joesge
- Facebook @joesge
-
JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I'm just writing this down so that it says something down here, because that's more professional right?) and if you're still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the "Armpit of the US" near Mt baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season). Even though it can smell bad around here we love the fresh air and being near the post office and in a quiet sleepy mountain town certainly gives us much closer access to Team Turtle and Team Beaver (Watch our "Who, what, when and where is JoesGE?" video if you don't get the reference).
All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse loosing molecules slowly over time degrading to become smaller and smaller.
If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so lets keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun filled day, because who couldn't use a few laughs? - วิทยาศาสตร์และเทคโนโลยี
Hello all, unfortunately, we have stopped servicing the Beats Solo 3 headphones. We will still be selling the parts. You can follow this link - bit.ly/3QNLdaz - to purchase any parts you are looking for.
Thank you so much for this! My left hinge broke and I was able to fix it thanks to you! The design is really poor, especially since the process to replace it is pretty long. I was super bummed bc mine is out of warranty. You saved me a new set of headphones!
Enjoy your newly restored headphones! And thanks for watching!
Thanks so much for your help. I've managed to repair the hinge myself and saved a fortune!! Super helpful step by step video.
Thanks for watching. Please like and subscribe for more content like this!
Thanks to you I was able to fix my neighbours sons broken set. This is as you say difficult. Hard to get the wiring free from its glue. Though it looks fragile it’s quite robust. Some of the clips broke as I prised the plate off. Seems ok without them. And that pin tested my command of Anglo Saxon. I made a pair of tweezers into a cross bill to get the thing back in. Advise you check all working including charger before reassembly. Overall these are not built to be repaired but your video made it possible. Sadly necessary because they were designed to get broken.
Thank you for patiently reviving and installing small parts.
Hello, you're very welcome. Thank you for the comment. Please like and subscribe for more content like this 😊
You make it seem so easy.. Gotta give you props for that.. I was able to follow the same steps and have a pair of working beats after my 2 hinges broke. Half way through the process I was about to contact yall. But your video gave me confidence.. First time I solder an electronic device I struggled with the Pins, soldering the speaker back but I did it. Once the music started playing man oh man.. Thanks a bunch!!
Thanks for the comment. Glad we can help:)
-David P
Yup not risking it o rather have them loose
No problem! You can also have them repaired if you fill out a repair form here: JoesGE.com/pages/repair-services
Joe's Gaming & Electronics u are stupid as fuck
Excellent work 👏 thanks
Happy to help. Thanks for watching. Please like and subscribe for more content like this!
Just finished doing the repair, went fine (tho less clean than you)
thanks to you !
*Never buying beats ever again, those things are not made to be repaired
😂 Not much is meant to be repaired now days.
If you're still struggling to get the little metal bit in, an easier way is to use a Needle a very tiny bit of glue to hold the metal bit slot it in and take the Needle out. Took me about a minute after trying to do it with tweezers for a good 2 hours
Wonderful idea. For some reason people are thumbs-up the completely useless comments and I didn't see your tip until completely frustrated trying to use tweezers. My daughter asked me if I could solder and she then bought the new hinge and sent this video. If I knew all the work involved, I would have just paid for joe's ge to fix it. If you're not well-paid, just hustle a bit to get the $80 for a pro repair.
@@Jemathis53 I even bought a set of new tweezers because the one i had was too big and that didn't even help, the needle and glue idea is honestly the easiest and quickest way to do it.
Why does that part break so easily, they were just in my case and broke then I got a new pair and they conveniently broke in the same spot after the warranty expired.
Thanks for watching! Unfortunately it is because it is one of the weakest points.
@@Joesge how much will it cost to get em fixed or is it cheaper to buy new ones
This repair would be around $80 to fix. Including shipping both ways, parts/labor and a 100 day repair warranty. JoesGE.com/pages/repair-services
Mines broke because my fiance's caveman of a nephew got mad at his brother and flung it at him.
@@Joesge and that weakest point is being owned by Apple.
In order to get those pesky pins into the hinge, stuff a tiny bit of cotton ball down into the side of the hinge just up to the pin hole level. Then the pin will sit perfectly lined up with the pin hole and you can push it into the hole. Those pins are a very tight fit and very slick and will NOT just slide in with tweezers the way the video shows.
This is rocket science
Do You Know The Exact Measurement Of A Hinge Pin In Length
The hinge pins can fly a long way if you pinch them with the tweezers just right... Not easy to find afterwards either (still haven't found it) so be careful!
I stopped when i saw the soldering shit. nah.
The right side doesn’t work and I was surprised to see this video. You make it look super easy, I’ll definitely give it a go, even though everything I touch breaks 😂
Contact us if you need more help:)
Hi, great video, very informative, what kind/brand of glue do you recommend? Thank you!
Thanks for watching! The adhesive we use is B-7000, which we also provide on our website: www.joesge.com/products/b7000-glue-50ml-clear-adhesive. CH
great both sides are right now 😂
😂
I made a small cut through the metal hinge with a junior hack saw, just enough to get the wire through. Bodged but it worked and you can barely see the cut
😂 at least it worked
Hi mate!
Thank you for sharing the video
What size should the needle pliers be and where do you get them?
Cheers!!
The smallest you can find there isn’t a specific size. You’ll have to test out the one that works for you.
Thank you very much. I have a Beat Solo 2 wireless that had a right hinge broken. I followed your instructions but my battery didn’t reset like yours and i can’t turn it on now at all. My battery is a little different from the model you worked on (black connector instead of white). I checked all wiring connected correctly. Is it possible I might have damaged the battery in the process, like by bending it or ….? Appreciate a hint. Thanks, Jay
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
I did the first part to replace the earcups. Worth it - so comfy! And I think that if I watch your directions ten time, I won't be intimidated doing the rest. But if I feel it wiser, can I send them to Joe's to have fixed for a decent price?
You could. Check out our repair form. www.joesge.com/pages/fix-beats-by-dre
Great video! Can you just clarify the speaker wiring. I see three wires - I think. 1 with red/copper, the other with blue/copper, and then what i believe is the plain copper which is the ground. Is that correct? And i only saw you (dis)connect two wires. What's the correct wiring? Thanks
Thank you for the comment. Unfortunately, we are unable to post photos in the comments. Please contact email: support@joesge.com for wiring schematics.
-David P
How do you do the left side? It has connection pieces instead of plain wires?
Same question 🙋🏽♂️
Great video. Does it matter if you use the hobby town glue or d-7000? Also with the soldering iron are you only using the heat to take off & replace the wires?
We use a hakko solder machine. And we have tested lots of glues including the hobby town glues. We think overall the B7000 is the best glue for the job.
Top...
We have yet to reach the top.
Ruslan P
Can you use solo 3 screws with a studio 2
can you make one for the studio 3 right hinge
Thanks for watching! We are in progress of making more repair videos, we appreciate your suggestion. The process is similar to the left side.
what did you used to unsolder ?
Do you know if the solo 2 uses the same hing as the solo 3 as they are out of stock in my location
I'll buy a new one !!
All the power to you!
I believe I am missing the pin, but my beats have been screwed up for a while (Left side won't stay in locked position and right side hinge is broken and only connected hanging by the wire). I did the fix my self but I am probably going to make a small cut through the hinge because I do not have all the supplies to solder and more.
You could defiantly send them in if you'd like us to so a repair for you. www.joesge.com
I already have all the parts you need to fix it which includes the spare cushions and the hinges, about how much would the shipping and labour cost? Ps. I broke the left hinge.
Hello David, thank you for reaching out to us. The estimated cost of the repair would be $135 if you did not purchase the parts from us. If you purchased the parts from us we would add a discount. To send your product to our location we suggest you submit our repair form here: JoesGE.com/pages/repair-services, use Google Chrome to submit our repair form. Check your junk/spam folder for the free shipping label if you are unable to find it in your inbox.
Ruslan P
should have added a step to test the resoldered connections.
if u dont have a continuity tester try checking it every now and then when you soldered using ur audio cable
What do you do about hinge pins that fall off? I need some help with that urgently. Thanks
Kusko, thank you for watching our video. We replace the hinge pins. You can send your product to our location for a repair by submitting our repair form here: JoesGE.com/pages/repair-services, use Google Chrome to submit our repair form.
Ruslan P
I have some Beats Solo 3 wireless and the right metal hinge clip broke. I would like to know if it’s repairable and if so I would like an estimate on how much the cost would be. Hope to hear back from you!
Thanks for watching! The estimated cost for this repair would be about 80$. This includes parts/labor, shipping and a 100 day repair warranty. You can fill out a repair for here: JoesGE.com/pages/repair-services
I managed to repair mine with your instructions. Unfortunately it was a pain in the ass, because there was glue from the assembly over several of the solder points and plug in bits. The glue was so strong I tore some of the wire casings too. The battery was also stuck on real tight, so I bent it a bit trying to get it out.
Now that it’s all back together, it seems to be working perfectly. But I’m scared the battery will explode next to my ear or something because I’ve heard it can happen to damaged Li polymer ones.
A heat gun is crucial to removing all of the glue. If you are concerned about it then you can send you headphones into us as a service and we can take a look at them.
If someone actually wanted to go through all of this they could also swap serial numbers at the same time or possibly change hinge name plate...not sure if the previous models had the same hinge though. Looks like alot of work to go through and possibly break everything in the process if you don't know what you're doing
5:28 what exactly is the gold inner hinge part called and where can i buy it
Hi Joe,
I tried this repair and after finishing I found disappointedly that the right speaker no longer outputted any audio. I tested the speaker by supplying 3v and it still works, so I assume I have broken/short circuited the red wire at some point. How do I figure out where the problem is and how can I fix it?
Thanks for the comment. Sounds like you make have damaged the red wire which is responsible for the sound. You will need to find where the wire is broken/short and bridge the connection with a new wire from that location.
If you would like your headphones repaired by a professional you can fill out a repair form and follow the steps to send in your headphones. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
-David P
What about if i only need to replace that pin? Any easy way of doing that?
You can try and remove the hinge from the headband and install that hinge.
Can you please list the tools you used to repair them
Thanks for watching! We use a pry tool, which you can find either on amazon or at most hardware stores, or you can use a thin sturdy piece of metal. You can find the screwdrivers here: www.joesge.com/products/beats-by-dre-screwdriver-tool-t5-repair-tools-1?variant=7905323024430
My hinge is just crcked. I'm not going through all this for a cracked hinge. Super glue for me.
Thanks for the comment. If you would like your headphones repaired by a professional you can fill out a repair form and follow the steps to send in your headphones. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
- David P
I have 2 issues with my beats and they happen to be on the same side (leaft side) my hinge is broken causing the beats to have a weak grip on my head and over bend themself. And the 2nd issueus the rail that the headphone slide on to adjust the height and stuff has like slipped off and is now sliding rather than a clicking noise and feel. How much and can i get them payed and repaired in australia?? I dont live in the US
Mines are loose they still work but its just very loose is there like a way i can just tighteb or something?
You'd have to take the inside and outside panel apart to do so.
I have a pair of Beats studio 3’s that need repairing. Right hinge. I just wanted to know how much time it would take to send them in and get them back. I’m in England.
Thank you for the comment. We do ship worldwide. International customers are responsible for shipping their items to our repair center, along with any customs fees. Once we receive the headphones we diagnose and repair the item within 1-2 business days (as long as parts are in stock). You will also be charged return shipping.
-David P
My beats solo 2 wireless headband cushion keeps coming off, I attempted to repair it but failed, can u guys fix this?
Thanks for watching, and yes we can fix this. Just fill out a repair form here: JoesGE.com/pages/repair-services . Once completed you should receive an automated email response with a free shipping label attached. just print out the label and place it on a lightweight package to send to us.
If I buy beats from your website would they come with all the accessories they normally come with when you buy them at the store? Or do I only get the headphones?
That is a great question! And yes, generally any Beats you buy from us comes with a charger if it needs it, an audio cable and a case. On our site, in the description, it informs you of the items that come with the headphones. CH
Do I have to replace the entire hinge like this if just one of the pins popped out?
usually the entire hinge needs to get replaced.
Ooooo looks hard
We do offer repair services if you fill out a repair form here: JoesGE.com/pages/repair-services
How do you know how to solder the black and red ones I can’t even zoom in on the video
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
hello after un soldering those cables can I remove the left hinge as well? or do I need to remove all the rest of the cables?
Thanks for watching! This video here may be more helpful to you: th-cam.com/video/1Fp4k8XnvSU/w-d-xo.html
You can remove the left one aswell or atleast i think so
i have a problem one of my screws is like stuck and i kept trying to get it out and now it’s like not coming out what do i do?
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P
Hey! I 've got the same problem but on the left hinge. Is the procedure the same?
Thanks for the comment. Yes, the process is similar. The only difference is that there will not be a battery located on the left side of the headphones.
-David P
Need that internal wire shown in this video red, blue, black with connector do you guys sell it?
Fernando, we do not sell the main internal wire. We only have the 5 core located here: www.joesge.com/products/beats-by-dre-solo-2-solo-3-wireless-5-core-wire-with-clip-parts
Ruslan P
What do you call to that glue
does somebody knows if the hinges for the solo 3 can find in my beats solo 2?
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P
hello :) Can I repair the left side the same way? Or is it more difficult?
Either can be done:)
What size are the screws for the headband replacement?
Thanks for the comment. The Phillips screwdriver is size 1x25.
-David P
Can you do a video on how to repair the left hinge
Thanks for watching! The process is similar but we can certainly keep your suggestion in mind! We post videos frequently for all sorts of repairs, so keep a lookout!
@@Joesge Any more specific guidance??? This video helped me successfully replace the right hinge on my wife's Solo 2's about a month ago... Now the left hinge broke, and I thought this one would be easier since I didn't have to mess with the battery or the USB charging port... I was WRONG... The left side seems WAY more difficult with regards to what/how to unsolder because of the audio jack/port... So ANY other feedback would be greatly appreciated... I don't know which ones I should or shouldn't...
We do not have a video on this hinge yet, if you would like to send in the headphones with any purchased replacement parts, we can repair them. Just follow the steps on our site here: JoesGE.com/pages/repair-services
I can’t adjust the size of my beats. It’s like stuck in one place. Do you think it is possible for u to fix it?
This is fixable, we actually get this issue often. You can fill out a repair form here: JoesGE.com/pages/repair-services. CH
Yeah this is exactly what's happening to my beats only the right will adjust with you actually hearing and feeling the clicks the left side does not make any clicks or stay in the spot you put it in and you can see on the left side where its cracked or split near the ear phone panel inside can this be fixed
So I have a broken headband but one of the screws is stripped so I can't remove the old headband. Can I replace it by going through the hinges or can I send it in to you guys? Thank you
Thanks for watching! You can try and fix it, but if you are not confident you can always send it to us, just fill out a repair form here: JoesGE.com/pages/repair-services
Is the top head beam pad included when you order?
No they are both different parts. One is the headband, and one is the headband cushion. we sell both on our website www.joesge.com
What temperature is the iron? Thx
Thanks for the comment. We normally pre-set the solder iron temperature to about 750 degrees F.
-David P
Omg jeez sooo much but ill give it a try and also where i buy that screw driver?
You can find the screwdrivers we use for repair here: www.joesge.com/products/beats-by-dre-screwdriver-tool-t5-repair-tools-1
Thanks
No problem!
How much would you charge for a beats solo 3 wireless hinge replacement via sending it to you guys?
Devon, we would charge $80 for a hinge replacement. Send your product to our location by submitting our repair form here: JoesGE.com/pages/repair-services, use Google Chrome to submit our repair form.
Ruslan P
How much would it be to replace both hinges? One is broken off and the other doesn't lock anymore.
You can send your device in for a repair so we can get you an exact quote. www.joesge.com/pages/repair-service
This would have been far better if the parts weren’t the same color (black on black) and the camera was in close up (lovely to see the table w your tools…); I was able to pinch zoom, but often your hands leave the frame…. And thx for zipping thru the most difficult part, the pins….
Sorry. we have been working on improving our video quality
Is there a way to do this without taking apart the whole thing
Not that we know of
So mine had glue on every conector and on the top of all the solder :/. Anyway ripped a wire when trying to peel it off from the plastic houseing. Instantly rage quit and binned them. Getting some Sony MX4s instead.
You could send them in for us to repair 😃
You don’t need to unsolder the black wire since that’s not the same black wire that passes through the hinge.
Does this work with beats solo 2 (wired) ?
It is a very similar process
Hey David! My hinge is broken i think but i don’t think i’m capable of replacing it. apple wanted to charge me 200 to fix it and i walked out of the store. would you be able to fix them for a more reasonable price?
We are more than happy to help you out with this issue. Unfortunately, we are unable to accurately quote you on this repair as there can be a variety of issues. We can, however, give you an estimated quote. The estimated price for repair is $70.00. Please note that the price quoted is only an estimate. We offer free shipping and free diagnostics. Please visit the link attached to start a repair request. www.joesge.com/pages/repair-services
Where is possibile to buy the piece that you have changed ? I'm not able to find it in Italy
www.joesge.com/products/beats-solo-3-wireless-metal-hinge-folding-parts?_pos=1&_sid=aa0439402&_ss=r&variant=32609964458030
what temp is ur solder iron on?
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P
My beats solo 2s have the same issue - looked at your website, only problem is, I live in the UK. Thing that hacks me off; I took real good care of these headphones, but after a year or so of use, snap. Usability goes down the drain.
We do offer services to the UK, And ship our products there. We do not however know the exact customs fees that will have to be paid.
How do i replace the top panel of the right side? My button is messed up
Hello Josue, thank you for watching our video. Please send us an image of the damage at Support@JoesGE.com. Thank you in advance.
Ruslan P
what about the case? the loop on my case broke and i have no idea how to fix it since i am not creative
Hello Dizxyy, please send us an image of the damage to your headphones to Support@JoesGE.com so we can give you a much clearer answer in regards to how to repair your issue if possible.
Ruslan P
Hi I cannot decide what part is broken my hinge or band
Please send us photos of your broken device to support@joesge.com.
hey, im interested in sending my beats solo 2 gold to yours and get it fixed. i have a broken hinge, how much will it cost? i live in italy!
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
What do I do if my driver doesn’t work? The charger port does work but no sound is coming out of my right side
Good morning, this issue can be caused by multiple things. Have you tried to see if the device functions properly with an aux cable?
I lost the hinge pin is that ok? There’s only one pin on both sides
Your hinges have a chance of falling out of place. We sell replacement hinge pins here. www.joesge.com/products/beats-solo-2-3-wireless-hinge-pins-2-x-pins-parts?_pos=1&_sid=c7f9b604d&_ss=r
Jeez I have no clue how you managed to get that pin in the hinge. I've been failing at it for the past half hour
Eventually we will make a close up video on how to do that repair.
@@Joesge did you guys make that video yet?
How much to get it fix?
$45-$75
What kind glue is it?
Thanks for watching! We recommend using B7000, as it is sensitive to heat making it easier to remove for repairs. You can find some on our website here: www.joesge.com/products/b7000-glue-50ml-clear-adhesive . CH
is the hinge of a beats solo 2 the same as a beats solo 3?
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
Is the left the same as the right?
Thanks for watching! The process is the same for the right side. CH
I don't have a soldering iron what do I do
Thanks for the comment. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
-David P
bonjour super tuto merci pour cet super video j'ia reussi a faire le démontage et remontage mais je n'arrive pas a souder les fil au bonne endroit a la 14.45 minutes de la vidéo
je n'y arrive pas ci quelqu'un peut m'aider je suis preneur j'ai souder mais le casque ne s'allume pas :(
My outside panel is loose. It doesnt clip. Can I glue it down? Or can I buy new panels?
You’d want to install a new panel because if you glue it you will ruin your other parts. You may have a broken inside or outside depending on your breakage. Take a photo once you took it apart and email us your photos with a description of your issue so we can get you the correct part.
www.joesge.com/products/beats-by-dre-solo-3-wireless-outside-exterior-panel-plastic-parts
How much would a repair like this cost?
40-75$
What are these tools called and can I buy them off Amazon
Thank you for the response. You should be able to buy these items on our website www.joesge.com. You can find the tools we currently sell by clicking here www.joesge.com/search?type=product&q=tools*. We will be listing more tools soon.
Why tf u gotta take the whole thing apart just for this
Can i do it without this ?
@@Ibraawoono, sadly not 😢
Same thing I was saying bro.
Time is precious and it’s better to just cut the loss and buy new ones at that point . Took me 4 hours to fix
Bummed. Right hinge broke on my wireless Studio3 and Apple is telling me it will be 199 to replace. I could buy a brand new pair for 249 on sale at Best Buy. I’m willing to pay someone .
Hello, You could definitely send your device to our repair center and we can take a look. Here is the link to our website 👉www.joesge.com/pages/repair-service - Aaron P
Do you know where to get the hinge pins?
Hollyhood559 eBay is where I’ve seen them for sale
@@thetechman1812 ive seen them too but i dont know if they are the right size. I got some off of amazon but they were too big. So i was wondering if they sell specific sizes cause i have solo 3 wireless
We unfortunately do not sell the hinge pins separately.
Do as I did to avoid all this and not have to buy new headphones. I just loaded the inside of the hinge with crazy Glue, let it sit, it's been OK for several months.
One of the worst pieces of advice I’ve heard in 10 years of fixing electronics 😅 please do the exact opposite of this.
@Joesge If the hinge is getting replaced why should it bother you to put glue on it. Oh yeah, Crazy glue will take you out of business 😅...Making things seem more complicated than they are.. so people will call upon you... And drop their hard money on some snake oil you sell.
Hello. Do you not repair SOLO 3's anymore? There is no option for them to be repaired on the application section of your website.
Unfortunately, we do not repair them. We do, however, still sell parts for them and have repair videos for most issues.
@@Joesgeawesome thank you.
All that to replace a hinge?
Yeah :/ Its a process.
The “thing” you’re pulling out the wires from, what’s the called ? I need it fixed on my beats and I can’t find the correct word for it. My hinge isn’t broken, it’s the where the L is located , where it bends in, the screws are missing and the headphone doesn’t have support to keep it in place.
That*
Im having the same problem and I can't figure out what size screws there are so I can get a replacement