Nice bushwacken! I've got a 03 Arctic Cat 900 ZR. It's a BEAST 150ish HP but it weighs a ton, I'm thinking of building one of these. You cave a very clean build, and I too believe in bogies over HYFAX. Summer project, pick one up cheaper one someone just blew up!
how has the 1in square tubing been holding up? what thickness is it? did you see a difference in handling between your first hyfax slide one to the bogie wheel one? thanks
Le 7.5 travaille bien defois sa prendrais le 13hp. Mon prochain setup va p-e etre un 15hp avec clutch de skidoo ou p-e 40 series avec track qui passe autour le moteur
The hitch? Has original Pelican hitch shorten and its 2 nuts welded to a plate with piece of round stock going threw it with a plate welded in the middle with a hole on the end
I think this is the best track sled I've seen in deep snow. You're on to something here. The power, gearing, and weight, ratio must be spot on!
Love it built mine this season and it really has outperformed what I thought it was gonna do!
WOW have seen so many people claiming they dont do well in deep snow but that thing rips !!!!!!!
Nice bushwacken! I've got a 03 Arctic Cat 900 ZR. It's a BEAST 150ish HP but it weighs a ton, I'm thinking of building one of these. You cave a very clean build, and I too believe in bogies over HYFAX. Summer project, pick one up cheaper one someone just blew up!
That is pretty sweet
Watch out for that tree!
can you make a quick video on how you attached your throttle cable to the engine.... ? id be curious
Some engines already comes with the bracket that has the cable holder on it if not you can buy it on Amazon cheap
thats a bad ass unit
how has the 1in square tubing been holding up? what thickness is it? did you see a difference in handling between your first hyfax slide one to the bogie wheel one? thanks
Wish I could find a video of someone climbing some mountains. I don't have anywhere flat to drive one of those that I would need to drive it in.
Not the best at climbing straight up but has no problem carving the side to get up
Nice setup ! Si tu avait à refaire prendrais tu un moteur 13 hp plus lourd ou le 7,5 est en masse fort ?
Le 7.5 travaille bien defois sa prendrais le 13hp. Mon prochain setup va p-e etre un 15hp avec clutch de skidoo ou p-e 40 series avec track qui passe autour le moteur
Nice setup, did you build the chassis yourself, and where did you get the track and drive train
Yes full custom chassis and undercarriage. Track is from a Ski-doo Citation 100" i think and had Elan drive cog with 40 series chains and sprockets
What is your gearing on that looks perfect balance of speed and torque
10t on clutch going to a 20t on jack shaft then 13t from jack shaft to 30t drive cog sprocket
@@NBLife459 thanks for info....building one is on the summer bucket list
How to you set up the hooks in the back
The hitch? Has original Pelican hitch shorten and its 2 nuts welded to a plate with piece of round stock going threw it with a plate welded in the middle with a hole on the end
Hi, can you tell me why you don't drive a snowmobile instead,,,?
Cause this is reliable and cheap to run and just a different kind of fun. Love snowmobiling too lol
What size lugs on that track 1 inch?
Either 1" or 3/4" dont remember
Nice build man! what are you getting for top speed?
35km/h on hard pack
@@NBLife459 nice! That's quick I can do about 17mph on mine
Where did you get the boggie wheels from?
Bought 12 from a local used parts guy for 10$ each