I just had my BCM explode on my 09 MKV. The worst damage is around that large melted IC chip. My BCM is a total loss, but I would love to know if you documented which wires you found shorted that caused the issue so my car doesn't eat another BCM. 😁
Nice work, I also had bcm water ingress last week. Tails and drl came on by itself. And thén keyfob antenna stopped working😅. Luckily I had a spare bcm laying around.
Hi, interesting video of the J519 of a golfv! Do you have an idea why this unit pulls 0.5amps continuously and activates the dash unit on and off when car should be in sleep mode? What could be the problem with this J519? Does it give information error codes on the can bus?
What was the issue with lights ? I have Bixenon lights on Passat B6,and changed xenon ballast,changed new original bulbs,checked the wiring,but both front lights are still not working,could it be this BCM that is causing problems ?
Hello! On 2006 VW Golf 5 SDI, Front parking lights stopped working , VCDS controller 09 cent. elec. no errors! checked with meter the output from J519 - 0 volts on the pins for Left and Right bulbs. All other lights work ok, both front and back. For example tested front low beam light pin output (tested from J519 to vehicle chassis ground) 3v when on. 0 when off. Does this mean I should check the PCB of J519 for burnings in driver ? My J519 is revision D (pretty old)
@@PORepair I look at schematics from ELSA win, I see on each side the parking light bulb shares the ground with High Beam and they go to ground point in engine bay. The other side of wiring to the bulb goes to J519 and connection is also called (for left side) "Positive connection (58L), in interior wiring harness"
I just had my BCM explode on my 09 MKV. The worst damage is around that large melted IC chip. My BCM is a total loss, but I would love to know if you documented which wires you found shorted that caused the issue so my car doesn't eat another BCM. 😁
Nice work, I also had bcm water ingress last week. Tails and drl came on by itself. And thén keyfob antenna stopped working😅. Luckily I had a spare bcm laying around.
Hi, interesting video of the J519 of a golfv! Do you have an idea why this unit pulls 0.5amps continuously and activates the dash unit on and off when car should be in sleep mode? What could be the problem with this J519? Does it give information error codes on the can bus?
Hello, I liked the video. Could you identify this tiny semi-inductor, with six contacts?
Been long time ago. But not hard to do that by looking smd marking codes
What was the issue with lights ? I have Bixenon lights on Passat B6,and changed xenon ballast,changed new original bulbs,checked the wiring,but both front lights are still not working,could it be this BCM that is causing problems ?
this one had issue with rear lights
@@PORepair So do you think my issue could be BCM?
@@MrRiderHD sorry i cant suggest anythink
Hello! On 2006 VW Golf 5 SDI, Front parking lights stopped working , VCDS controller 09 cent. elec. no errors! checked with meter the output from J519 - 0 volts on the pins for Left and Right bulbs. All other lights work ok, both front and back. For example tested front low beam light pin output (tested from J519 to vehicle chassis ground) 3v when on. 0 when off. Does this mean I should check the PCB of J519 for burnings in driver ? My J519 is revision D (pretty old)
hi, i cant remember now, but need to check how it controls bulbs, or bulbs have always 12v, and j519 gives ground (0v) then bulb activated.
@@PORepair I look at schematics from ELSA win, I see on each side the parking light bulb shares the ground with High Beam and they go to ground point in engine bay. The other side of wiring to the bulb goes to J519 and connection is also called (for left side) "Positive connection (58L), in interior wiring harness"
Donde te encuentras para mandar mi módulo amigo?
UK or LT