My switch is not turning on after lcd replacement. I don't know if it's a defective lcd or a loose/broken ribbon cable. Do the ribbon cable pins break easily when pushing it too far?
You should be able to use your old LCD screen. In the video, the robot voice mentions that it’s recommended replacing both the touchscreen digitizer and LCD screen. I’ve replaced an LCD and kept the same digitizer in the same switch once.
I STOPPED WATCHING AT 6:59 ! Not a good tutorial! They don’t show you how to pass the screen flex through the shell, they just skipped that part. How can can they leave out such an important detail ?
Ok please let me explain. If you have purchased a cheap chinese screen replacement you got robbed there dead on arrival pay more then 50.00 for a screen replacement
![DIY Switch Lite Shell Swap: Step by Step Tutorial [4K]](http://i.ytimg.com/vi/XoOx3PLH2cU/mqdefault.jpg)
Me ayudó demasiado, muchas gracias ✨
Good tutorial, but you need to fold the new screen ribbon cable back onto the rear of the screens and pass the end through the hole in the shell.
Excellent video, it was easy enough to follow and replace
My switch is not turning on after lcd replacement. I don't know if it's a defective lcd or a loose/broken ribbon cable. Do the ribbon cable pins break easily when pushing it too far?
I think your lcd is a problem
What double sided tape do you recommend?
3m couple mm wide
Where do I find this kind of tape?
Do i have to buy a new LCD? or can i just use my old one
You should be able to use your old LCD screen. In the video, the robot voice mentions that it’s recommended replacing both the touchscreen digitizer and LCD screen. I’ve replaced an LCD and kept the same digitizer in the same switch once.
i do this but no display
I didn't follow this tutorial, didn't show the results at the end smh
Why did you use a grey digitiser yet at the end the pink one is back lol
Cause they broke their lcd and had to do it again
I STOPPED WATCHING AT 6:59 !
Not a good tutorial!
They don’t show you how to pass the screen flex through the shell, they just skipped that part.
How can can they leave out such an important detail ?
lol did you end up accidently doing what they said? kinda weird they didnt put the lcd onto the digitzer then that shell that has the battery on it?
Ok please let me explain.
If you have purchased a cheap chinese screen replacement you got robbed there dead on arrival pay more then 50.00 for a screen replacement
Too much work
This is beyond ridiculous. Absolutely not going to even consider attempting this.