*I caught this guy on my 3rd cast. Paired with these 4" trailers. **enjoyable.fishing** recommend slightly modified, I think i trimmed about 3/4 of an inch off of it. Its deadly!*
you can if you try..in my experience with the traditional eyes they will eventually come off from time to time during extended use..doing it this way with softer plastic should help that.
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit th-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Have watched this video many times, just getting into the bait making for personal use. Just rcvd my new eyeball mold from Jason. Also rcvd a modified 4" DR swimbait mold. Instead of the injection ports on the side , I had him put the ports on the top of each bait so doing 2 color laminates will be much easier. Thanks again for all the great info
Love the new mold. To pour a solid color eye in one pour. All you need is solid a backing plate. That way you can save time and plastic. I think that would be a good option to include with the mold or a separate purchase item. Really enjoy the videos. Tight lines.
Wow! Incredible idea! That is a really awesome mold. It's a real privilege to see such genius at work. Stay on the gas pedal my friend, you are on your way to a million subscribers! Stay safe Makin baits
That's sick! I can't wait to see the final product with a dual injection. Could you do a bloodline with a skin pour? I'm assuming yes but youd probably have to do a little bit of a heating process to get it to bond better. I really want to try and combine all those techniques into a bait
I'm going to have to think long and hard before purchasing this! Oh wait...there is my shipping conformation. That is a crazy cool idea and so glad I seen this video tonight. You are a great salesman for this company. As soon as I seen the title I knew I was buying it. Love the pre-made eyes but to be able to make them yourself is a game changer!
I bet AnglingAI could make an interchangeable plate to create frog eyes. The plate you remove for the final shot could be changed out with the frog/lizard eye plate that creates that slit look.
i seen these eye mold i think it great a guy took the time to come up with this very simple way of making eyes..but selling them might be a patient an you loose everything you ever worked for if they do have patient on eyes
How did you keep the eye balls and bloodlines in place when closing the mold? Wouldn't they move around inside the mold prior to injecting the plastisol?
COOL! So in the future we will have different size swim baits (4,5,6inch) with different size eyes! A 4 inch swimbait with a 1/4 eye or a 4 inch swimbait with a 1/2 eye! Angling AI will have to get a couple more machines to fill orders! (LOL)
Hey Chris, early on I was having trouble with the eyes shifting in the mold when shooting. I then strated using a tiny dab of vasaline in the eye socket and that helped keep the eyes in place. Every once in a while I will run into a bonding issue between the eye and the bait. I am wondering if its the vasaline causing that or not enough temperature. I shoot the bait pretty hot.......thaanks for your input.
Hi I’m having a problem the plastisol I get is a medium blend and it’s the only one I can get in Canada the problem I’m having is with open pour the plastic when I poured into the mould seems to be shrinking leave divot The top of the mould doesn’t want to fill I’ve heated the mould up quite hot to accommodate the hot plastic to stop shrinkage I thought but it still seems to be happening I’m wondering is it because of the medium plastic that I’m using I sure hope you reply thanks Brad Andrews your friend in Canada by the way great show been following it for a long time
Very interesting design! Though should be patented immediately, if not already.... I believe next would be injection molds to accomodate these eyes in... jerk and swim baits are my suggestions.... Koodos to AI and Josh!
I am just starting out and have a couple of molds, with no eye sockets. Has anyone used a dab (or little skin skin pour) of clear plastic to hold the eye in place on the side of the mold....'til you shoot the main body color(s) into the mold? Thanks!
Try making new colors using old plastics u made before. That is very interesting. Nothing wrong with swim baits but u can then make more craws and different kinds of bait besides swim baits
This is fantastic, posted just a few minutes after I made another large discounted order. Time to go back and purchase more stuff “5 inch open pour hint”
Show...the best...muito bom...vamis trazer essa tecnologia parao Brasil....👋👋👋congratulations...Marcelo João....Brasil...Rio Grande do Sul....Canoas City...like
Where do you by plastisol I am trying to make soft plastics but I am about to run out of baits to melt and I am going to try to start a company as a 12 year old hopefully it goes good
Chris, im having trouble with my new Do-It 4oz. Hand injector. Every so often I have to take it apart and clean out thin bits of plastic that has gotten behind the plunger. If I dont keep it clean it ends up drawing air instead of plastic. Do I need to replace to o-rings or is this normal? I just bought the thing so I figured the orings would be ok but perhaps it sat in the store for a long time before I finally purchased it?
@@WorldsWorstFishing I thought that the Little Hammer spru flip was clever (and it is lol) but this eye solution must have been a Eureka moment for sure.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Be sure to check out the safety tips on using this mold properly starting at 23:12. What an awesome creation this mold is!
The mold design is ingenious, I expect there will be some awesome eye combos in the future !! Sick vid !
Bet now that the mold is figured out it wouldn't be too difficult to do different shaped pupil plates
There needs to be a mold with a variety of eye sizes to make it more practical than buying every size individually. Awesome mold man, love the videos
his mold is absulutley genius
*I caught this guy on my 3rd cast. Paired with these 4" trailers. **enjoyable.fishing** recommend slightly modified, I think i trimmed about 3/4 of an inch off of it. Its deadly!*
Triple injection eye ball? I think they would look very cool
Was thinking will it laminate but you sir pulled out the triple idea. Hats off 👏
@@40s9s3 c block eyes with the dip your car colors? Interesting.
That is an engineering marvel. Wow. Super cool. Would love to see the adhesion to the swim bait body if you could “peel” the eye away
you can if you try..in my experience with the traditional eyes they will eventually come off from time to time during extended use..doing it this way with softer plastic should help that.
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit th-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Great mold and awesome demonstration Chris. Time to spend some more money lol. Angling Ai for the win, yet again. 🙌🏾🙌🏾🙌🏾
Thanks 👍 it is an awesome tool to have!
I wonder how a large hand pour swimbait would look with a bunch of suspended eyes in it. Not natural but possibly interesting.
You would have to be careful not to melt the eye balls with pouting hot plastic
I am so impressed by that mold. Seriously, that is _genius!_ Thanks for sharing!
Have watched this video many times, just getting into the bait making for personal use. Just rcvd my new eyeball mold from Jason. Also rcvd a modified 4" DR swimbait mold. Instead of the injection ports on the side , I had him put the ports on the top of each bait so doing 2 color laminates will be much easier. Thanks again for all the great info
Love the new mold. To pour a solid color eye in one pour. All you need is solid a backing plate. That way you can save time and plastic. I think that would be a good option to include with the mold or a separate purchase item. Really enjoy the videos. Tight lines.
We discussed that idea of a solid plate yesterday, might be something he will test
That is an amazing mold. Hats off to the engineering y’all came up with. Can’t wait to see future videos with this.
Awesome job again Chris. The whole shop just sat down and watched your video. We all can't thank you enough!!!!
hope all enjoyed!
Angling Al Do you think with a drill press and a ball bit we could modify other molds by our selves?
@@ZZ430T56 Not without a way to secure the mold and mechanically move the plate. Without that, it will jump on you and be a little unsafe.
You also can add these to any bait with Mend-it or a lighter/soldering iron. No clear dip required
absolutely
This is an insane mold!! These Angling A.I. folks are on a whole other level. Great demonstration video!
Much appreciated!
HELL YEAH 1000000000000000000000% GENIUS JOSH DOES IT AGAIN!!!! -DROWNINGLURES
he's insane!! in a good way
@@WorldsWorstFishing dude they came out so nice 👌
@@anthonydunn9414 👍👍
You could use the eye mold to make shad spots too. Just use the solid eye. Great mold and great video
As my kids used to say Awesome Sauce, great work Josh and Chris. You guys continue to push the envelope on this hobby/business.
We try haha
I have a 2 question. 1. Why are you sometime adding salt? 2. When will you do lure for Light rock fishing (Lrf) or light spin...
Wow! Incredible idea! That is a really awesome mold. It's a real privilege to see such genius at work. Stay on the gas pedal my friend, you are on your way to a million subscribers! Stay safe Makin baits
That's the plan!
Very Cool. Black pupil with Red and or red/orange Iris. . Killer color for bream. The solid eye would be great for making a spot tail minnow or Shad.
I have never made my own lures before somewhat new to fishing but this is awesome. I need it.
That's sick! I can't wait to see the final product with a dual injection. Could you do a bloodline with a skin pour? I'm assuming yes but youd probably have to do a little bit of a heating process to get it to bond better. I really want to try and combine all those techniques into a bait
I'm going to have to think long and hard before purchasing this! Oh wait...there is my shipping conformation. That is a crazy cool idea and so glad I seen this video tonight. You are a great salesman for this company. As soon as I seen the title I knew I was buying it. Love the pre-made eyes but to be able to make them yourself is a game changer!
Hope you like it!
What a sweet mold! Guy who made it is a genius
yeah he said the solution hit him one night
This content gets better and better every video...killin it Chris!
thanks!!!!
Este molde es el más increíble que he visto, gracias por compartir. This mold is incredible, thanks 4 sharing
NICE!!!
HOW CAN I PURCHASE FROM YOU, ?
absolutely brillant..anglingai are killing it well done guys
👍👍
Chris that eye mold is super cool and those swim baits are a winner. 👍
Thanks 👍
I bet AnglingAI could make an interchangeable plate to create frog eyes. The plate you remove for the final shot could be changed out with the frog/lizard eye plate that creates that slit look.
That eye mold is slick👌🏻
*Gets ready to see some cool custom eye work*
Can't wait!
Awesome mold, I have been using it since it came out. Thanks for the video.
🙏🙏
Y’all should try and make some with different types of pupils like reptiles and stuff
Now this is a really neat mold idea.
It's sweet
Super stuff can’t wait to see what he comes up next 👍
we have some other "wild" ideas in development
I like bait plastics the best. The ultra clear is awesome and free shipping. I know your sponsored, but it’s good stuff
bait* plastics...very good plastic.
Wondering if you could use the blending block with this engineering marvel
perhaps
@@WorldsWorstFishing
I'd like to see you trying....if it works... which I think it will...that's gonna be frickin awesome....
The 1 person who dissed liked this as to be hater. Another BANGER video keep killing it
What a cool mold. Josh really put some time in that for sure. #killingthemoldgame💥💥💥
Good video I like how you showed the product I can use this eye mold for fly tying there are a wide variety of fly's that you add eyes thank you.
🙏🙏
i seen these eye mold i think it great a guy took the time to come up with this very simple way of making eyes..but selling them might be a patient an you loose everything you ever worked for if they do have patient on eyes
That’s pretty cool. You could probably put a hook in the string of eyes and catch a fish with it.
Amazing how they came up with the idea BRAVO.
Looks like a great addition to the collection.
Very!
Very nice! Thanks for the video. Always learning something new each day. Un abrazo from Cartagena, Colombia.
Thanks for watching
Genius idea. Love the channel and all of Josh's creations. Amazing
Glad you like them!
How did you keep the eye balls and bloodlines in place when closing the mold? Wouldn't they move around inside the mold prior to injecting the plastisol?
Can you use a C block or blending block with them? This is an exciting new mold!
You `should make some videos where you fish with your baits.
def hope to soon
Man never fishes, just makes baits😂
@@kolbybaker1924 my fishing is......about par lol
Dang man, that is absolutely fantastic. You guys did an awesome job.
🙌
Well dang it I just put in a big order Tuesday at A.I. Now I gotta have this as well lol.
COOL! So in the future we will have different size swim baits (4,5,6inch) with different size eyes! A 4 inch swimbait with a 1/4 eye or a 4 inch swimbait with a 1/2 eye! Angling AI will have to get a couple more machines to fill orders! (LOL)
Hey Chris, early on I was having trouble with the eyes shifting in the mold when shooting. I then strated using a tiny dab of vasaline in the eye socket and that helped keep the eyes in place. Every once in a while I will run into a bonding issue between the eye and the bait. I am wondering if its the vasaline causing that or not enough temperature. I shoot the bait pretty hot.......thaanks for your input.
Great collaboration on a super idea
Hi I’m having a problem the plastisol I get is a medium blend and it’s the only one I can get in Canada the problem I’m having is with open pour the plastic when I poured into the mould seems to be shrinking leave divot The top of the mould doesn’t want to fill I’ve heated the mould up quite hot to accommodate the hot plastic to stop shrinkage I thought but it still seems to be happening I’m wondering is it because of the medium plastic that I’m using
I sure hope you reply thanks Brad Andrews your friend in Canada by the way great show been following it for a long time
You guys always seem to have another trick up your sleeve. AWESOME! 👍🍺🎣
Pvc เหลวที่ใช้ทำ มันเป็นอัตรายต่อตัวเราไหมครับ เวลาเราเวฟออกมา ขอสอบถามเป็นความรู้หน่อยครับ🙏🏻🙏🏻🙏🏻
Very interesting design! Though should be patented immediately, if not already....
I believe next would be injection molds to accomodate these eyes in... jerk and swim baits are my suggestions....
Koodos to AI and Josh!
Great point!
The eyeball mold is wicked!
Indeed
Late to the party, but it looks like you could probably open pour solid eyes or even laminated hand pours if you wanted to get wild
What spray adhesive are you using for the eyes? Mine vasaline idea works ok but i believe the adhesive might work better
what those eyes like if you used in from moulds as the frog spots? instead of dripping in plastic or painting them in.
Great videos all ! Is the mold for the Grass Grenade available for purchase, and if so, where? Thank you.
Yes, genuinely a genius idea. Just think of the possibilities you haven’t thought of yet.
I am just starting out and have a couple of molds, with no eye sockets. Has anyone used a dab (or little skin skin pour) of clear plastic to hold the eye in place on the side of the mold....'til you shoot the main body color(s) into the mold? Thanks!
Wow, now I gotta have one!! Thanks for the video on this!!
Try making new colors using old plastics u made before. That is very interesting. Nothing wrong with swim baits but u can then make more craws and different kinds of bait besides swim baits
This is fantastic, posted just a few minutes after I made another large discounted order. Time to go back and purchase more stuff “5 inch open pour hint”
haha
Well Fluid dynamics CNC work What a great mold gonna be cool You will be able to do a lot of Bait
Need to put in some glow in the dark for them pupils and triple inject with a glow center line and then go night fishing :)
I think that's the coolest thing I have ever seen!! WOW
🙌
Excellent work. Do you have a favorite bluegill mold?
awesome video as always. What if they made a solid plate for one color eyes so the plastic can't get out
we discussed that...might be in thw works
Left out how to keep the eyes and lines in the mold while you inject. contact spray?
Awesome design wish i had all yhat stuff. Id make baits all day
awesome mold will have to add these to the list
Go for it!
Show...the best...muito bom...vamis trazer essa tecnologia parao Brasil....👋👋👋congratulations...Marcelo João....Brasil...Rio Grande do Sul....Canoas City...like
those eyes are amazing! how about a spotted gar swim bait?
That’s some forward thinking for sure!!
yeah he did the impossible
Where do you by plastisol I am trying to make soft plastics but I am about to run out of baits to melt and I am going to try to start a company as a 12 year old hopefully it goes good
Thank you for the amazing content. Its helping out big time!!!
Really cool videos! Makes me say “ohhh so that’s how they do it”
I absolutely love your videos keep it going
Thank you so much!
Thanks for the video. I have the 4 inch blood line mold and th 4 inch hand pour thes eyes will fit them right?. Thanks Mr.jones
Yes
Lake Okeechobee tips or Harris chain tips?
not really..dont live anywhere near it
Notification came up during school and I couldn't wait till lunch
Haha thanks
You should try a swirl or something like that . Loved the video keep it up 👍
Thanks for the idea!
I tried 2 times with black with a little glitter in it. And only got half the pupils both times. I am maybe thinking you can't use glitter?
You should make a trout eye with pink pupil and double injected clear green iris
would never have guessed you could inject these amazing eyes
Would adding those eyes to a frog catch more fish?
someone had a great idea with this mold
Have you tried to make multi-colored blood line inserts. ?
Chris, im having trouble with my new Do-It 4oz. Hand injector. Every so often I have to take it apart and clean out thin bits of plastic that has gotten behind the plunger. If I dont keep it clean it ends up drawing air instead of plastic. Do I need to replace to o-rings or is this normal? I just bought the thing so I figured the orings would be ok but perhaps it sat in the store for a long time before I finally purchased it?
I've spent $100s on eyes, this is will be a great buy. Getting it now
its so fun too
@@WorldsWorstFishing Do you still use loctite for the eyes?
Awesome video chris! Thanks for sharing! Love watching your videos!
🙌🙌
Where do you get the block you use to make laminates?
Well that's just bloody genius!
Yep!
@@WorldsWorstFishing I thought that the Little Hammer spru flip was clever (and it is lol) but this eye solution must have been a Eureka moment for sure.
Hey man awesome looking baits school can wait because I’m watching this
Which kind of chatreuse is it? And where can i get it? Im from germany and its hard to get some of these items here