Making Soft Plastic Fishing Lures For The FIRST TIME! Mistakes Were Made!
ฝัง
- เผยแพร่เมื่อ 7 พ.ค. 2023
- We finally got our Do-It Molds kit out and decided to make our first few batches of soft plastic fishing lures! We did SOME research, watched some videos, and even took some of your advice... and we still messed up lol. The good news is, even with the mistakes we made, the soft plastics still came out pretty good! We learned a lot about lure making in just a few hours! Now we are ready to keep learning and getting better! If you want to make your own soft plastics, just head over to Do-It Molds and pick up one of the starter kits! More lure making will be hitting the channel, so be sure to subscribe, and comment below what you think we should make next!
#luremaking #aggressivelyaverageanglers #fishinglures
Join this channel to get access to perks:
/ @aaanglers
Join the Knuklehed Bass Series for a chance to win $10,000!
www.kayakbassfishing.com/knuk...
Check out MONSTERBASS the Better Box and use code SAVE15 to get your first box for $10. LINK BELOW
Aggressively Average Merch: aggressivelyaverageanglers.my...
Brand Ambassador:
Get Your Free 30 Day Audible Trial: www.audibletrial.com/aaanglers
Monsterbass: bit.ly/3ASUNkd
Monsterbass Lunkersticks: shrsl.com/3z15w
Mule Fishing: www.mulefishing.com/?aff=2
Buzbe Tackle Boxes: buzbe.com/burlyfishing10
OKUMA: bit.ly/2Ns0HV6
Soft Steel Line: bit.ly/3GmkMUf
Fishlab Tackle: bit.ly/38i30oJ
Waterland Sunglasses: www.waterlandco.com use code: BURLY15 for 15% off
Aqua Vu: www.aquavu.com/?ref=burlyfishing
Want to send us something to unbox or for the channel? Reach out to us on Instagram (@aaanglers) or email us: info@burlyfishing.com
Follow BurlyFishing:
Podcast: cms.megaphone.fm/channel/WPCM...
Instagram: burlyfishing and paul_j_glass
Facebook: burlyfishing
Subscribe to my channel: bit.ly/3cPZPRG
Tik Tok: www.tiktok.com/@burlyfishing
My Kayak Videos: bit.ly/2S9MJ9R
My Reviews and Unboxings: bit.ly/2yMotE3
My Tackle Hacks: bit.ly/2W0W4lO
My Fishing Videos: bit.ly/2KGrHMe
My Podcast Episodes: bit.ly/35ePCeX - กีฬา
What should we make next?
Something with action; craw, Swimbait/grub, curl tail worm
Craw/frog with paddle tail lags
Try an open pour mold of some sort.
Paddle tail
Need to turn your injector, your shooting one color on each side is why your not getting a laminate. Awesome video guys
Did you see the end where these dummies figured it out finally lol
@@aaanglers lol I typed this before I saw the end 🤣
Hey guys. Protips. 1. Denting comes from the cold molds pulling the heat from the plastic at a fast rate, so preheating with a griddle or even a heat gun to reduce the difference from the ambient temp and the mold temps will help reduce that. (Heat gun can also help warm up the injector). 2. The injectors should pull and push way smoother, try using a little worm oil around the o-ring on the plunger and run it up and down a few times until you get a smooth pull. 3. Bubbles will no longer be an issue if you invest in a vacuum chamber (can also be useful in the future if you decide to make your own silicone molds). 3. With pigments/dyes, the more drops/scoops you use, the more saturated the color of the bait, the more opaque (solid as opposed to see through) it will be. Always start with less drops, especially in a laminate/swirl. 4. Before shooting a set to see how it will match up, you can drizzle some plastic off the stirring utensil onto a work surface to see how they blend, using a teaspoon at max vs over 2 oz of plastic. I'm excited for you guys now that you've started pouring yourselves. The Creepy Crawler vibe is exactly how I perceived it when I started pouring a few years ago. Awesome reference. Can't wait to see how you guys progress on your bait making journey. Tight lines.
Side note: Paul... NEVER use that much force to try and inject plastisol... if hot plastic shoots out the sides or with those particular non-locking injectors, the tips come off and it all pours out, you can seriously burn yourself, even through clothing.
Fantastic tips!
Thanks for alm the tips!
Also had the creepy crawlers set. It was the bomb! Awesome vid guys!
I remember Paul doing an unboxing video for all this stuff. It was in better condition then. A little more dry.
Haha yup!
A Doug reference!? Millennials for the WIN!
🙌finally someone caught it! Nice!
@@aaanglers I was a huge Doug fan. That is, until Disney ruined it lol.
When remelting plastic you will need to cut it up. And in the winter use a heater on the molds and injector
Good call!
Nice. You can add some white before the chartreuse. It makes it opaque for more popping chartreuse
Also, heaven help you when you start playing with highlight powder.
Hahaha thanks!
World's worst fishing has awesome videos, Chris makes great training videos
Glad you figured it out!😅
Heck yeah! Glad yall are messing around with baitin now! Those baits look amazing!
Thanks!
the stale cracker shout out 🤣 im excited to see what you guys cook up with the color combos 🎣
put that on a cracka dood
The hollow part of the worm is where you stick your rattle LOL
Perfect 😂
Nice colors, Debo for the save!
🙌
@@aaanglers black with white flakes!
My favorite stormtroopers. It's a process at first but once do a few it's easy from there
We're here for the process!
Killing it!! Keep it up guys. I was gonna do the knucklehead but couldn't make up my mind on which Ned to fish with
Love this vid. You guys kill me 😂
I’m sure with practice you guy will kill it
Eventually lol
Thanks 🙌
I wish you guys all the success in this endeavor 🎉🎉🎉😊I love how you get along ssssssoooooo well!! Please keep it up 😊
🤙
I had a friend of a friend that made a metal mould for plastic baits for one of his finals as a tool and die maker. I have a few baits that he made. He had to design the baits and machine them out of metal and used dowel pins to close them instead of hinges.
I used to make them years ago in the plastic things that you could only mould one side of a bait and the rest was just flat. I also made a bunch of rods but I figured out It was just cheaper to buy them. I spent hours spinning a rod in my hands to let the coating dry and the first fish I caught the tip broke off
Great video and great job for 1st time! Thanks for sharing and I hope we will see more bait making videos! It would be cool to see you make some swimbaits. #AggressivelyAverageAnglers rocks!!!
On it!
Great first goes on the Baits i think we all have made the same mistakes starting out
Make sure you are getting a snug fit with that beard! As someone who used to fit test people, most people with any sort of beard, had to shave. It's really difficult to get a proper seal with the mask with a beard in most cases, just food for thought. Safety is always first! I cannot imagine you'd wanna breath in that funky stuff. Great video and keep up the great work. Tight lines!
Thanks! I pulled it super tight. We had the garage open too to help. I can never shave this beard lol, my kids would freak out!
great video ,,, really loved this one , great job guys
Thanks!
Very nice can you PLEASE make me some Hellgrammites Lol I can’t find the Yum or afford the Nikko brand.. It’s so exciting making soft plastics I’m glad you guys are getting into it and a partnership in suing with Do It… great video Guys
No partnership but they did hook us up with a starter kit
I don't think that I have ever commented on this channel even though I've been subbed for quite some time. But I gotta say that this was awesome. Enjoyed it very much. Keep up the good work and fun.
That’s awesome!!!
Thank you!
Awesome video! I'm going to get my grandson, who is a great fisherman, his own starter kit for Christmas I'm on my way to the Do-It site right now!
Great job guys. This is something I've been wanting to do but I want to make my own mold...I want one of the OG banjo minnows with some limper plastic in a smoke color
🤙
We need more of this!
There will be more!
BIG SWIMBAITS!!
Loved this episode of aggressively entertaining science
Would love to see rod making for the next science series
Did the vacuum pump not work that i sent? Don't forget you can heat your molds to prevent prevent bubbles
We’re just getting it going. Gonna try that next!
Definitely considering this for those long winter months. What is the finished product like. They’re not salted so more of a yum dinger type plastic?
Standard plastic at this point, like yum
Very much like a dinger, maybe even softer. Sink rate is still good. Already caught some fish on em so…. They work!
@@aaanglers that would work for me. In New England with damn beaver dams everywhere so I throw the 4” dinger on a super lite 2/0 ewg a lot. Got it from Creek Fishing Adventures. You get a close presentation to the wacky rig but a lot better for around sticks and branches
Paul was clearly training for this video with his shakeweight.
Ope
🤣
Man I'm so glad I found a group for my aggressively average fishing skills
🙌
Nice to see some people honoring the show Doug😂
Don’t breathe in the fumes 😂😂But we did it our entire childhood making creepy crawlers!
Hey guys I am trying to get into this what are some tips and additional good things I should know
We've made a couple videos covering the gear and making. More to come! Check out our guys Debo's Fishing and World's Worst Fishing for good how to videos.
alright thanks 👍🏻
Hello, I would like to know how do I buy the equipment? because I live in Japan and it's difficult to have these materials here!! your video is very good!!
Thanks! I'm not sure about shipping to Japan.
21:34 10 drops green to 25 yellow is such an odd guess but id bet my money
Where do you buy the kit
Do it molds website
How about red white and blue?
Where did you get the mold
Do it molds
transparent zenko with blast of red blood flakes
Breaking Bad - Bass Edition! or Breaking Bass!!!!
Very disappointed you didnt sing spoonman when Paul was banging
Opportunity missed 😂
How much did you buy in the box? Price? Can you tell me where to buy it?
I'm begging you.
Everything is on Do It Molds website
@@aaanglers thank you
I'm getting Breaking Bad vibes 😂
Yup
Do you know anyone making saltwater big fish soft baits?
Not really
This videos old but the reason why your laminate didn't come out right is because you needed to turn the plate sideways 😅
You can keep reheating your plastisol... Yep just keep watching and it's there
what was the cost of your little bag of worms
You mean adding up the amount of plastisol and colorant we used?
Mmm reminds me of how every time I put a bag of scented worms with my worms and it gets a tiny slit in the bottom of the bag every time
I'm pretty sure your not supposed to shake the plastic that much, :)
Lmao. U need me to help you
try to twist as you inject?
95% of what I fish with I make myself now....nothing better than that
Watch worlds worst fishing. Best channel making plastics
We called them out in the vid. Learning a lot from him
With some more practice, yall will get better.
🙌
pig and elephant DNA just won't splice
Hahahahaha
Turn the injector the other way not in line with the mold
My bad answered before I finished the video
World's Worst Fishing - Chris Jones absolutely the best bait making videos check him out.
We did and mentioned in the video. Been watching him a while and learning.
Gt yourself a heat gun, then warm your molds, I very much liked those 1st neds you made kind of earthy colors, good video guys, lots of fun Lets Go Brandon !
Advising the use of a respirator with facial hair is pretty dumb tbh. It's better than nothing, but it's not working as intended. There are dramatic reductions in filter capability due to lack of seal.
do not try and remelt any z man plastics they do not melt its a special type of plastic
Check out marrking he’s also really great and has done great designs and has killed with some of his lures and plastics.
Next time lol.