This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!
Big fan of the Nitrous Outlet products, and David Vasser seems to be a really great dude also. Some awesome innovations from that camp with the stinger series plates and nitrous puck.
I own a chrysler 300c crd V6 diesel, its a dry nitrous system and injector is Pre intercooler. I have it going into the turbo downpipe. Is there a better place i can fit it do you think?
So I have a pretty well built foxbody with a 347 stroker I’m wanting to put nitro on it do I have to buy a new intake or what do I need to do with that I’m new to nitrous not trying to spend 2k on a turbo kit for my car
This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!
Yes, where ever you can get fused power from and send to a relay. Depends if they are going through an engine management system to trigger the solenoids or not. They supply the micro switch for the throttle body if not using an ecu. Fuse and relay are also included.
Have you used nitrous before ? What was it on ?
Ahh yes watching people do the purge... and then not have enough to go down the track.
Dabbled in the nitrous with both a VS clubsport and BF XR8. Would love to spray a 300 shot in the VH SL/E eventually too 😈
This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!
... Also it is a P-71 Police Interceptor if that makes a difference.
I’m Listening to him talk about staging lanes and drag race terms when I’m just tryna slap a wet kit on my 1.8l 4 banger😅
Big fan of the Nitrous Outlet products, and David Vasser seems to be a really great dude also. Some awesome innovations from that camp with the stinger series plates and nitrous puck.
Hear me out, can u use galaxy gas for this lol
😂😂
I have a feeling we both watched the same video of a guys using galaxy gas on his car😂
The purple ZeX bottles are rated to 2500. I trust those better.
How does this video have only 294 views after 3 days??? People are missing good content!
Should the bolts on the solinoids screw in all the way. Mines get pretty tight mid way or a little above half
Yeah the screw in all the way on the ones I have. There are different size and length screws, so maybe make sure they are the right ones.
Thank you so much for this video💪🏼 Is this a full kit?
I thought this was how to install a nos kit , not how to unbox one
Does anyone have links to all the stuff in the video
I’m looking into just show, is it possible for me just to set up the purge kit ? without having the nitrous shoot into my engine ?
What would be a good setup for my fuel injected vtwin
Nothing , if you want to go fast on a motorcycle..buy a sport bike. A Kawasaki z1000 will gap a nitrous Harley
Are the jets purchased separate?
I own a chrysler 300c crd V6 diesel, its a dry nitrous system and injector is Pre intercooler. I have it going into the turbo downpipe.
Is there a better place i can fit it do you think?
If you’re using it to spool the turbo that’s fine, if you’re using it as a main power adder it should be in the throttle body if possible.
Will this primarily be used as a power adder or to assist in getting the turbo up faster?
It will primarily be used to blow up my lawnmower. Secondary use I will think about later 😂
Can i have a link for this exact kit?
Do you have the link for this kit? I want to purchase it for my ram.
nitrousoutlet.com/i-30560029-universal-efi-single-nozzle-system.html this is basically the kit, with a purge system and a blanket added to it.
How much would this all together cost and then how much are the individual cans
800 for the whole kit for what you need
350 smallblock v8
So I have a pretty well built foxbody with a 347 stroker I’m wanting to put nitro on it do I have to buy a new intake or what do I need to do with that I’m new to nitrous not trying to spend 2k on a turbo kit for my car
Depends what intake you have on it now. Carby, efi ?
@@BroomysGarage no I have a cobra upper and lower intake
Check out their website. They may do a bolt on plate kit that sits behind the throttle body for that engine.
This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!
I think its probably idle air control valve
@silentscream1871 thank you! I'll check it out.
@@thekiltedveteran update me when you figure it out
Idle air, or battery or alternator my guy
Jesus call me two pump chump im so early
Too soon, Junior!
Blow off discs bottle valves are so shit
Like the video , very clear , quick question , for the wiring are they as simple tapping to fuses box ?
Yes, where ever you can get fused power from and send to a relay. Depends if they are going through an engine management system to trigger the solenoids or not. They supply the micro switch for the throttle body if not using an ecu. Fuse and relay are also included.
@@BroomysGarage ah interesting I have hondata .. will be cool if I know where to tap the cable but I still need tune anyway.