My Garmin Striker 4 Fish Finder Kayak Setup / Mount, Power, and Accessories
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Follow along as I show you the components I used to install my Garmin Striker 4 fish finder on my Jackson Coosa HD kayak. I Chose the Garmin Striker 4, and Ram Mounting hardware, and Nocqua Lithium Ion Battery to complete my ultimate kayak fish finder setup.
**CHECK OUT THESE VIDEOS**
Which Garmin Striker 4 Fish Finder Should YOU Chose? Hard Choices
• Which Garmin Striker 4...
Garmin Striker 4 Kayak Install...Simple Transducer Mounting Option
• Garmin Striker 4 Kayak...
**Get your Garmin Striker 4 Here...CHEAP**
Garmin Striker 4- amzn.to/2K8qSZJ
Garmin Striker 4 Plus- amzn.to/2zlv5tu
Garmin Striker Vivid 4cv- amzn.to/3uqZ10x
Garmin Striker 4 ICE Fishing Bundle- amzn.to/3KTaBZj
Garmin Striker 4 Cover- amzn.to/2mSyztK
Garmin Striker 4 Plus & CV Cover- amzn.to/3netvya
Kayak Mounting:
1" Ram Light Duty Mount/Striker 4- amzn.to/3OXRBes
1" Ram Screw Ball W/ Bolt- amzn.to/370wtOZ
Garmin in Hull Foam Transducer Mount - amzn.to/3gUEiKy
Duct Seal- amzn.to/3nfJpsi
Power Your Striker 4:
Nocqua Pro Power Kit Battery 10.0 Ah: amzn.to/2KxqmsW
Nocqua 4.4 Ah Pro Power Kit: amzn.to/2IYFRqD
Nocqua Dual Port USB Adapter: amzn.to/2J21BSj
Nocqua Super Y Connector: amzn.to/2ZCi1HM
^ Above Are Associate Links ^
I love how straight to the point this was. It's basically "Here's how/why I did it." Boom. That's it. Love it.
No need for all the fluff...lol Thank you
Literally straight up and to the point. 5min and short. No long unnecessary talking. Subs!
Thanks a ton :)
I just finished buying this set up for my "perception pescador pilot 12 pedal kayak." I am so excited to get everything. I just bought EVERYthing I needed thanks to YOU!
I made this video because I wished I knew exactly what I needed when I added my fish finder to my kayak...so glad this has helped.
This video is extremely helpful!!! My husband wants a fish finder for Christmas and I had to do a lot of research (I do not know anything about fishing!). Your videos have been super helpful. God bless you!!
Awesome, I am sure he would love one of these. Is it for a kayak?
@@1Cast1Fish Yes, it for a kayak. I found the Garmin striker plus 4cv. I figured it would be easier since it has the two types of views.
That will be a awesome kayak fish finder he will love it. Don’t forget a good battery to power it
ahhh the internet never ceases to amaze me. thanks for running through all of this. Great video!!
Glad you enjoyed it!
Because of your expert advice in your previous videos I really enjoy my Garmin Striker 4 in my Lifetime Tamarack Kayak. Many fish found and in the freezer. Thank you.
Great to hear, thank you
Heading out to try my Striker 4 for the first time. Really enjoying your channel, and how simply you explain the Garmin features.
Hope you enjoy it and any questions or things you want to see in a future video let me know
Play at 1.25x speed
Turn your brain up to max intelligence setting 😉
Turn Your brain up to max intelligence setting 😉
Unfortunately mobile only supports up to 2x, on desktop extensions let you got to 3x and beyond which is nice.
Thanks!
Hell yeah
Loving the series. To any who are looking, I paired up a wilderness systems lithium battery to a Garmin Striker 4cv vivid. The Wilderness systems lithium battery has issues with Sonars that draw over 1amp or require more than 12v. I have had no issues with the battery and the Garmin.
Additionally, I was able to pick up the 15ah lithium battery for 60 dollars on clearance due to the discontinuation of it.
Sweet find for a good price, a buddy I fish with sometimes uses that battery
I have the same setup on my hobie revo 13, perfect for offshore fishing in Hawaii. 🤙🤙
It really is a great setup, a bit expensive, but high quality that will last. I have had this setup for years now with no issues.
Thanks for the video. I really needed someone to tell me how to attach my Striker 4 to my kayak. I have the portable kit but I want it more securely attached. Great video!
Glad I could help!
This was actually a super concise video nice job
Glad it was helpful :)
nice one for all the info, just ordered myself one here in the UK, and man you've lost some weight, happy days
Awesome that you ordered one, I am sure you will love it, any questions just ask and I will do my best to answer.....and Yep, down 35 pounds, got a ways to go, but very motivating that you noticed...thanks
@@1Cast1Fish thanks for the reply, im just undecided on what amp battery go for, i'll be doing around 5hrs on the water each trip, am i right they draw around 3watts??
I always recommend the 10 Ah if you can afford the extra money....only because you can run other items off it as well for longer. In reality though the smaller battery will serve you just fine unless you use it for very long periods (days) or run multiple items like phone charger and GoPros from it.
I love my garmin stiker 4 such a great fish finder!! glad to see a new video from you it has been awhile my friend!!
It really is a awesome fish finder for the money....I have had mine for years with no issues
I liked this Striker 4 so much that I bought a second one for my other boat. Have been using the first unit, with all my waypoints, between both boats. How about a video showing how to transfer waypoints from one unit to another? Great videos, keep up the good work.
That is one of the biggest down sides with the Striker 4 sharing waypoints is not that easy as a fish finder with a SD card slot.
This will be a great reference video for my new Striker 4 for my Ascend 12T! Great and helpful video my friend!👍BABAAM!!
Glad it was helpful! Thank you
That is a really nice set up my friend. Thank you for walking us through it.
You bet...thank you
I am having trouble finding the attachments for this ram mount. What ram sent me does not fit on striker 4.
Thanks! You were the most informative and right to the point!
Glad it was helpful! Thank you :)
This is fantastic. Thank you so much. Unless someone shows you, you have no idea. You completely explained all the options, so know I will know what I’m talking about. Awesome! Subscribed!
Thank you, I was definitely overwhelmed with all the options and what would be compatible with what when I first decided to add a fish finder to my kayak. I hope this video definitely makes the process easier for others.
These videos are awesome. Very helpful
Thank you
Good info video. I have never added a fish finder to any of my kayaks.
Well worth it IMO if you fish a lot of lakes and rivers
That's a nice setup for a kayak. I'm thinking about getting one for the front of my jon boat to use with the built-in transducer on my new trolling motor.
This will fit the bill....go with the Plus or the Plus CV
Thanks. I like the wilderness system 15,000 mAH. At $10 more, can do so much more. Great topic.
Great battery IMO to hate for the Wilderness, buddy of mine runs it with no issues
Thank you so much, great video, explaining very nicely.
Glad it was helpful! Thanks
Now that’s a video 👌
Thank you very much, glad you enjoyed
Great video, thanks for the quick response in sharing this with me. I greatly appreciate it!
No problem...hope this helped
Great videos by the way. I’m trying to. Make this a one step purchase instead of doing it piece meal. So I’m wondering what other things I’m going to need.
Everything I used in in the description
Awesome stuff, love those Ram mount accessories. Lots of great information, thanks for sharing with us.
Adrian
They do make a great product....all my mounts are from them on the kayak and boat
Great video! Was trying to find a mount for the Garmin 4. I also watched your installation video of installing with duct seal for drill free installation. This will be my route . Thanks and tight lines
This has been a great mounting option for me...it has worked great and is totally removable if need be.
Quick question, I've read a few post on the y adapter being a 4 pin instead of 2. It's a 2 pin configuration right?
@@ledforthehead23 the Y adapter is 2 pin
You helped again. Thanks!
Glad to help!
The top part that you used to attach to the fishfinder base looks different. At least the link you posted for it had a different one shown.
Oh, I see what you are talking about..so I already mounted the Garmin Striker Base to the top circle plate. If you look close at 1:31 you can see the Ram Base under the Garmin Striker Base.
Very helpful video! I got incredibly lucky and got a brand new "vibe sea ghost 110" that came with the striker 4 brand new in box for $300. Been scratching my head for awhile trying to figure out battery options.
Sounds like you got a great deal...congrats and good luck on the water
Nice video my guy and I had a few laughs, well done 👍🏻
Appreciate it, thanks
I too use garmin striker 4 and nocqua
Great combo...a bit expensive compared to some other options, but well worth it IMO...it has been flawless for a few years now.
Excellent set up and advice. Thanks
Thank you
super great walk through man you really know how to make a great learning tutorial video & how too's
I appreciate that! Thanks
Super helpful video man! Thank you
Glad to hear it! Thank you
@@1Cast1Fish I recently bought the pelican premium the catch 120 waiting for it to come in ordering my Garmin in a few days, ice fishing has been fun but I'm excited for open water!!
@@ryleyrodger311Sounds like you will be set with a good yak and fishfinder for when the water opens up. Did you decide on a battery option yet?
Great video and to the point. Thanks.
Thanks for watching!
Sweet 😊
Thanks!
Great video !
Glad you enjoyed it
Awesome info, thanks!!
Glad it was helpful!
Very nice video
Thank you :)
Love my striker 4. I might need to invest in that little pig tail .
If you have the Nocqua battery, you will not regret having the pigtail Y and the USB options...no more camera battery swaps :)
I just bought a 16' fiberglass canoe, I'm trying to figure out how I want to mount the transducer. I might try one of those swing arm mounts by Scotty. It's seems what most are doing. I have the striker 4 with clear view, so the transducer is about 6 inches long, I'm hoping that with the arm, the transducer doesn't wobble
The arms work pretty well, only issues I see is they catch weeds alot in thick grass
What are the brown and blue wires for on the power cord?
They are for communication...normally for wiring it to another Garmin Striker to share data such as saved waypoints.
Great video
Thank you
What is your opinion on mounting the transducer to the trolling motor?
It will work just fine...thats how we all mounted our bow mounted fish finder transducers before they started making trolling motors with transducers integrated.
great thank you , very clear
Glad it helped!
I was walking through the the setup - ran into an issue with the ram mount - can you walk through how you put the mount together - my mount came without screws
I used bolts and nuts to attach the ram mount to the plastic base mount for the Striker 4.
@@1Cast1Fish they did not come with kit so I had to order - thanks
ok, hope it works great and mounts up good.
Can you install the larger transducer for the chirp model with duck seal on the interior of your kayak also?
I have the GT20 installed this way without issue.
Have you seen any major differences with doing the in-hull tranducer in the front cargo hold vs the rear?
I have never messed with putting it in the rear hatch. I should work fine though...the key is no air gaps, and be sure the transducer is below the waterline when mounted.
Your videos are so easy to understand! I only have one question. When you put cords in the hull how do you shut the lid to keep it water tight? Thank you for the great videos.
Good question! I guess it depends on the type of lid you have. My lids have a rubber ring around them, they are not 100% waterproof to start, so I just close my lid over them. I also have seen some people go all out and use the waterproof connector bulkheads and go through the upper part of the kayak with the cords. Lots of variables at play though depending on kayak type and design
I have the same set up. I got it on my pelican 110 hd.
It is a bit expensive, but this is a rock solid setup as you know...glad you are enjoying your Yak and catching some fish.
Great videos, thank you. Question...In hull mount with the Striker 4, water temp is a feature I use a lot. Would you suggest I use exterior in water mount instead of in hull mount for accurate temp readings?
With the in hull mount the water temp reading will not be accurate. To have accurate water temp readings, you must mount the transducer so that it is in the water
@@1Cast1Fish I can tell you that properly mounted, your water temp will work but might take 30 minutes or so for your hull to match the water temp. Worse case is you’d be a degree or so off. I’ve tested this through my Pelican kayak hull and compared it with an in water and they are very, very close.
Love your videos BTW!!!
Good video my brother
Appreciate it...thank you
A bit late just purchased one for a kayak but when you put the transducer in the hull did you ever get any interference or did it work perfectly?
As long as no air gaps, I have had zero issues or interference
That looks like a nice battery you have how do you charge it and is possible to hook it up to a solar panel to keep it charged?
To charge it, you just plug it into a normal wall outlet. Check out their website for solar chargers...they have a Goal Zero Solar setup you can buy.
Do the railings that you slid the ball mount into come with the kayak ? Or did you install that ?
These came on the kayak already
So is the USB port an Y adapter needed or does the noaqua pro power kit come with all you need
The USB and Y are extras, but they are very useful depending on your power needs. The kit comes with everything you need for a standard setup...then you can add the Y or USB later if you like.
I have a feelfree kayak, Will the ball mount on my track?
I think most of the mounting tracks are the same across brands
By any chance can you send a link for the ram ball joint that you used and your arm bracket that you used for the transducer?
Everything should be linked already in the decription...as for mounting the transducer, I mount it inside the hull with duct seal
Hello,
As I was watching to see what ram light duty mount you used, I clicked on the link you posted for it and it brought me to the item but it didnt have the same attachment on as the one you have. The attachment you have on it in the video, I saw that that comes with the garmin kit itself. Did you just swap out the attachments for both the top and bottom?
I used the top to mount to the fishfinder base, I removed the bottom so I can attach it to a 1" ball mount on the kayak rail.
nice set up man! what stryker 4 model do you have? im still choosing between price and what I really need. Any thoughts?
I use the base Striker 4, but I mostly fish small lakes and rivers with my kayak. I do plan on getting one of the new Vivid 4CV's this summer though hopefully. What type of fishing do you primarily do? Another option is to look for the non Vivid model CV's since they are on sale most places to make room for the new Vivid's.
@@1Cast1Fish I fish lakes here in North Texas. Yeah I saw the sticker 4 plus cv on sale at 149.88 but out of stock in local Bass Pro. Thinking the base model may be enough for me now, at 99.99, and I use the extra cash for the Ram mounts and Nucqoa battery you suggested.
The battery is a great investment...I have had mine since 2017 and still holds a charge like a champ without issue.
@@1Cast1Fish yes sir, went ahead with the purchase and arriving next week! 👍👍👍
@@bobbyclaros1978 I am sure you will love it
It also says its for the Garmin Echo series, is that the same as the Striker 4 series?
I believe so, I believe that it works for both...but not 100% sure, but they share the same base mount.
Can that rail system be added to a Radisson Canoe? Also wondering if transducer signal will penetrate thin aluminum hull
Not 100% on the rail, but the transducer will shoot through a aluminum hull. I have seen mixed reviews with the CV transducer and aluminum hulls though....sometime sit works good, and sometimes not so well. The regular 2D sonar has no issues normally
So sick
Thanks man....you do any fishing lately?
i just upgraded my set up from a SLA battery to a nocqua 4.4A. i don’t need to charge any other devices except my garmim striker 4 and would like to keep it minimal to save weight. i noticed in some of your other videos, that you don’t use an in-line fuse as supplied by garmin. if i ad a fuse because of the added wire it would basically make that part of my set up really not waterproof. any reasons for concern or issue not using the fuse? this battery is going to save me about 4lbs on my kayak set up!
my other option is to put this battery with the fuse and part of the power cable from the garmin into a waterproof box i already have and use a cable gland to run just the power cable out.
I actually always have the fuse to protect the fish finder, but it is semi sealed pretty well....I have never had a issue with water getting in it.
Great vid! I just got a 4cv, and trying to decide between the 4.4ah or the 10 Nocqua. I see the 4cv power draw is 400mah. Should I assume this will run the fish finder for over 10 hours on the 4.4 Nocqua (plenty for me)? Any reason to get the 10 instead? Would love to get your thoughts.
The 4 works great for most everyone and day trips....I like the 10 for a few reasons. I power the fish finder and my cameras from the battery....plus I use it on hunting trips to charge things and such....so I get alot of "other" uses from it as well so the extra power is useful for me.
@@1Cast1Fish Gotcha. Wouldn't hurt to future-proof a bit with a bigger battery, ended up going with the 10. Thanks again for the reply.
No problem...plus the 10 really is not all that much bigger
Is garmin fish finder can be use on canoe? Do you have a video tutorial on how to install transducer on it?
It will work...for a canoe I would look at the over the side mounting arms....or try the duct seal method and see if it will work.
How did you get the bolts/screws in the bottom of the ram mounted before you attached the fish finder?
They just mated up with the holes in the plastic base for the Striker 4....bolt and nuts is all I used.
I just got a echomap 73sv and this type of mount looks sturdier than the yak attack lock and load system. I really like that lock and load but it looks very wobbly. Is yours pretty sturdy?
I think so...It wobbles a bit but nothing that would be worrying. It is pretty stable IMO
Could you share the link for the specific ram mount that you purchased?
My whole setup right here th-cam.com/video/Vir8gm-meQ4/w-d-xo.html
Is there a chance that you can show part number on the light duty assert mount ? The one that I am looking at on Amazon doesn’t look the same as yours.
They have changed a bit and Amazon is flakey on which ones they have in stock sometimes.
@@1Cast1Fish Amazon does not have the adjustable ball mount will the hobby one work?
Should, it's 1" I believe as well. If not, they are easy to return
We're you able to attach the ram mount to the bottom of the striker mount using all three screw holes? I bought the same set up and when I went to attach the mount no matter which hole arrangement I tried, I could only get 2 of the 3 screw holes to align. Feels like I'm crazy but I tried each arrangement a bunch of times.
I was able to get all 3 to match up on mine
Do you have a link for the track the ball fits into
I do not, but any standard kayak gear track should work for you
1Cast 1Fish, first time commentor, many video watcher.....great vids sir!! My question is this...
I bought the Stiker Plus 4 and watched your install video. You put the transponder inside your Kyak, doesnt it have to
be in the water? I have watched a few other videos and everyone has theres outside and mostly on the back of boat.
Is there something I am missing here? Because I would love to do it your way!
The plus 4 transducer is not powerful enough to create enough heat to cook itself if outside of water...some big unit transducers are 1000W + and they do get hot. Check out my video I just posted to day as it goes over how to mount the transducer inside the hull in depth.
It just has to be under the water line.
I have a Feel Free Moken V2 12.5. It has a removable sonar pod, I Velcroed my battery in front and made a duck seal (plumber's putty), oval shaped dam behind the battery, filled with waterproof clear picture caulk. Pressed my transducer til it basically bottom. Let sit for a day. Works perfectly. You can do that basically anywhere in your hull. Mine happens to be in the middle. Hope this helps!
Sounds like a solid mount
Ryan, sent reply to 1 cast1fish. You can find it. Good luck! Try not to over think it! It will work, if not, just reposition it. Tight lines!
Do you use the Garmin striker plus or just the regular Garmin striker 4
I bought the regular, but wish I would have bought at least the plus. The mapping feature is a great addition if you fish any lakes or rivers. I mostly only fished small creeks and rivers that did not have a lot of depth or depth change, so I went with the regular...now I fish a few small lakes as well and wish I had a Plus.
Will I be able to use that set up on the NuCanoe Dashboard XL? I just purchased a Gramin Striker 4.
If it has the mounting tracks, then YES
Does that ram mount also work for the striker 4 CV?
Yes, I use mine for both the base Striker 4 and my Vivid
I need to find a cheaper solution for the power. I can’t justify the cost of yours. Love the rest of it though 👍
Did you look at the smaller Nocqua battery or just the 10 Amp?....there are cheaper options out there though...just a bit more work on the front end and a tad bit less flexibility.
Nocqua Adventure Gear Super Y Connector is out of stock. Do I need an adapter to connect the Nocqua battery to my Garmin Sticker?
The layout of the male pins doesn't look like they will connect to the female end of the Sticker
The Y connector is not needed, but you must have the adaptor that comes with the battery kit. The adaptor will have one side of wires that you tie into the fishfinder power cable, then the other side will fit the battery pigtail.
Hey you. How the heck are you. I love to see your channel is doing so well. I would be afraid that my kayak would flip if I fished from it.
I am doing well...I am surprised I have never flipped mine...but it is pretty stable. Its always fun to be on the water regardless though fishing rod or not.
Is there an adapter? I wasn’t able to connect my garmin to my battery do you have to splice it?
What type of battery are you using?
@@1Cast1Fish I’m using the same battery as you the noaqua pro power kit
Check this out, should help hopefully
th-cam.com/video/MpMk6YTWoVE/w-d-xo.html
Can you provide a part number for the light duty mount? I cannot find it on rye ram mount website. Also my ram Arm transducer mount seems to be missing parts to connect transducer. Any help will be appreciated.
The link and # are in the description, but they have been very hard to find lately...guess production has not kept up with demand very well. Not sure on the transducer mount since I don't have one. What part seems to be missing?
The garmin transducer has 2 eyelets that are approx 1 inch apart and the mount is not that wide so it seems I am missing a spacer or something so that transducer will stay study. Thanks for your help much appreciated
The transducer should be sturdy enough to stay level on its own, but they will have a bit of play...that way if they hit a object (impact) they can flip up to avoid damage.
dear sir. thank you so much for this video. i've gone to rammount website and i've selected 2 part numbers to go with my garmin striker 4. however i think im still short of 1 part that is needed to fix to the base of the garmin round support structure before fixing to the socket arm. can you help me? the 2 parts that i have got from the website is RAM-B-201U (double socket arm) and RAP-B-354U-TRA1 (track ball). many thanks for your help.
Look at the links in the video description for the parts you need...RAM-B-201U (double socket arm) is just a arm, not the rest of the support structure for the fish finder, so it will not work without addition stuff.
I am also missing one part of this set up, that being the adaptor which connects the Garman fish finder to one end of the double socket arm. Without this adaptor plate the socket arm contains a round plate on each end with the ball. Please help me identify this adaptor plate. Thanks Bill Jonkey
Am I missing something? The striker comes with lose wires to connect to a 12 V battery and there was no adapter with the nocqua kit that just plugs into the striker. Any idea what piece is missing and where I can buy it? (A two pint plug to connect to a four pin female?)
th-cam.com/video/L3r9oSCZbeM/w-d-xo.html Check this out it should help
The Nocqua kit should have the adapter that gets spliced to the Strikers power cable.
How long does the fishfinder battery last?
Depends on the battery size, but I can go a few days on the 10ah
How do I get the horizontal split screen display like the pic on the box? I don't see that option from home manu.
Do you have any split screen options to choose from on the main menu? If so, go into the settings on that screen and you can choose vertical or horz split.
Do you have a product number for the light duty mount? I'm having a hard time finding it
Link is in the description
How long does the Garmin last on a 10ah vs a 4ah battery?
About double
How do you charge the battery? Thank you
The Nocqua comes with a plug in charger
@@1Cast1Fish Awesome thank you I’m buying the striker 4 tomorrow
Awesome, hope you love it
@@1Cast1Fish just picked it up although can’t find battery gotta get that online. How long does it last if just charging fish finder?
I have used it a few days without issue on the 10ah battery.
Can you use this one for ocean ?
Yes
Can you please send a link to the ram mount accessories for my striker 4?
I found it. The ram ball mount is out of stock. Will the yak attack 1” work?
Yeah they go quick once in stock, but yes the Yak Attack 1" will work just as good.
Can you get temperature readings hull mounted with duct putty?
No you can not
Do you need the Y connector? I have mine coming in for my striker 4 and I was just thinking I could possibly splice the wires.
If you have a Nocqua Pro Power Kit battery pack, then it comes with the install kit with a single connector to plug into. If you want to run more things from the battery, you can add a Y connector later if you like...no new splicing needed.
@@1Cast1Fish mine is now on backorder for another 2 weeks. insane lol, i swear these batteries are so popular. i had to buy a cabalas 12v DC for the meantime for this weekend. thank god the garmin has an inline fuse so i don't have to fiddle with it.
Dang 2 weeks, guess it could be worse, but fishing is starting to heat up now... so glad you will have it soon. Where did you order from?
1Cast 1Fish THE GPS STORE, that was the only place that had it to buy . Amazon didn’t have it at all.
1Cast 1Fish The one In North Carolina. I talk to a store employee and that what they told me . Ohh well
Thanks for your informative video. Not that you are to blame, but it is a little surprising how a $122 Fish Finder (the basic version) totals over $300 when you include the minimal basic accessories you have listed. Ouch! There are less expensive mounts and batteries available if you look around.
@@janman55 I agree, that’s always the way it seems. You can save some money though by mounting the fish finder directly to the kayak or using an off brand mount instead of RAM. Also the battery comes in a smaller 4.4ah version that is cheaper…again or you can go off brand or even standard small lead acid battery to save even more. This is just my setup and due to use and abuse I wanted the best I could find, it has lasted years now without issue…that’s why I like these items in particular.
Hope this helps a bit
I know I’m late but I just got a kayak that doesn’t have a place for my mount to go on, any ideas?
You can buy and add rails to any kayak, they come in many sizes and colors as well
@@1Cast1Fish thanks I’ll try it!
I bought a Striker 4 bundle after viewing this video. However, it does not come with the piece that connecting the fish finder screen unit and the 1" Ram Light Duty Mount as shown in the listed mounting accessories. I am not sure where to buy it
Are you referring to the rotating plastic portion that the fish finder mounts too?
@@1Cast1Fish Yes. I also noticed that the Striker 4 bundle unit is different at the bottom; it does not have the plastic circle at the bottom.
Yeah that is likely the issue, I have never owned a bundle package so was unsure the exact difference. However I do know the fish finder is exactly the same....which means you may be able to call Garmin and just order the mounting bracket for the unit and then it would be just like a unbundled one possibly.
@@1Cast1Fish I called Garmin, but the guy doesn't know where to get the bracket. It seems he might not be very knowledgeable. May I ask where you got that mounting bracket? Is it in the striker 4 package?
Maybe this is what you are looking for?
www.amazon.com/Garmin-Swivel-Mount-Striker-010-12439-10/dp/B07C3TBGTM/ref=sr_1_1?keywords=garmin+striker+4+bracket&qid=1638108618&sr=8-1
Would like to know the ram mount product info, model number?
Should be linked in the decription
So the transducer just sit in the kayak without any interference? You put that cat thing in there and it works without issues huh?
Correct, with the proper mounting it works just fine in the hull. Not sure I understand what you mean by cat thing though?
@@1Cast1Fish I’m having issue mounting it. I bought the duct seal but it does not read. When I take it out of my yak and put it in the water. It works fine.
What model kayak? Is the duct seal to thick maybe?
@@1Cast1Fish 2021 ascend 12T
Check your mounting area, is the hull real thick there...also duct seal thickness, and ensure no bubbles are air gaps in anything. Never seen a issue on the Ascends