How to replace rear Brake Pads and Rotors on Honda Accord 2008 to 2012
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
- ยานยนต์และพาหนะ
June 11, 2024 and you still are the greatest guider ever 💯💯
Thank you!!!
This is the clearest and easiest to follow video I've ever watched about car stuff...and I've watched A LOT lol I appreciate you taking the time to show all angles and explain each step! Thanks!
Thank u yup all of my videos are this way and I’m making them better and better
Thanks for the helpful hints. Filing the pads was the right thing to make them slide better.
Welcome
Very well detailed!!! I never knew I had to file the brakes!!!!!
Yes
Nice video RB. A few points. I noticed when you took off the caliper the pads only had one of those spreader clips, (not sure that's what you call them) should have two and you only put one back at the end. Make sure when you buy pads that it has 4 of those.
I also use a cheap hanger to hang the caliper when working on the brakes. (wish i had your lift, would be so much easier)
The screws that hold the rotors on are not phillips, they are JIS screws (Japanese Industrial Standard) so its important to use a JIS screwdriver. I put anti seize on screws when putting back on.
I put a little grease on the two spacer/shims to hold while putting back together also, it helps.
The file on the pad ends to make fit better was a good idea. I also put a littler grease on those ends also, is that OK?
thanks
Ok thanks yeah it’s fine
Solid video guy!!! I need to save this one.
*_Thanks for making a clear easy to follow video._* So, after watching this I'm pretty sure I can do this on my own but I'm wondering about compressing the piston back into the caliper. I really don't wanna buy a professional caliper tool set. Can't I just use a C clamp or a compression tool instead? *_Thanks for your help much appreciated !!!_*
No c clap will not work
Thanks very detail for me🎉❤❤
Welcome
Thanks man 😁 I’m doing mine today
Welcome let me know how it went
Great video bud. Thank you
No problem always here to help!
Great video, very detail. Do you need to bleed off some brake fluid to compress the piston in?
No need bleeding but ur ur reserva is over filled it might over flow then u might have to take some out of that
There's usually 2 seperator springs for the front and rear wheels brake pads. You only placed 1 separator spring on the rear brake pads ?
Grease both brake pads EARS, moving parts that snaps on the abutment clips.
Usully I see only one
Solid vid!! Thanks!!
Glad you liked it!
Is it possible to compress piston without opening bleeder valve but fluid reservoir cover open on ABS system, for same model?
Yes it can be compressed
For anyone wondering, you will need 12mm 14mm & 17mm
Thank u!
If the piston does not rotate back then that means it needs replacement/rebuilding correct?
Yup then it means it’s jammed up
@@RBTheMechanic Thanks Excellent tutorial. Very well filmed and explained.
@@richardshippful thank u
What’s the torque specs for bolts?
I also want to know the torque specs
@@christpherhall2735 Front and rear bracket bolts 80 ft/lbs. Front pin bolts 37 ft/lbs. Rear pin bolts 17 ft/lbs. That's for the EX 4 cylinder at least. They might be different depending on the trim level. The EX has larger front brakes than the others. I think the rears are all the same, though.
Could you please tell me torque for rear and front both?
What year is ur accord and engine size?
@@RBTheMechanic 2011 honda accord v6 sedan
Speading fingers you ever heard of that
Huh
Отвори тормозної скоби не почистили що під направляючі.Напильником підганяти торм.колодки -це жах.Це просто заміна торм.дисків та колодок,а не як обслуговування супорта.
No clue what u said