What kit did you order? Rough country swears up and down nothing fits my 2021 pro4x 4wd and they wear the kit won’t work unless I source struts from somewhere else
I did a 2 inch front and it leveled it. However I wanted my rear a little higher so I got a 1" block for the rear. But you are correct I think I might have to get rear longer shocks. Seem a little stiffer.
Thumbs up for the video ! I have a question 👋 does this lift void's your warranty! I got a 21 pro 4 x and would like to do this too but I don't want to if it messes up with the warranty looks good thoug 👍
It will only void the warranty on the parts that were replaced, in this case the upper control arm. If your motor blows, trans goes out or power seats stop working etc. you'll still be covered under warranty.
@@jovanysmechtronixs3811 are the 5100s? longer or what is the difference ? I install the same kit on my 2018 titan SL but do hear some noise when passing bumps
I ordered a RC 3” lift for my 2020 P4X. Took it to a garage and they told me the 3” RC lift will not work with the Pro4x. Messaged RC after giving up trying to call them they said that it does not work with the P4X. Their website shows a P4X. Anyway, please let me know how it works out. I haven’t sent the kit back yet. I’m assuming that since you have to trim the bell housing to make it fit they are saying it doesn’t fit.
Honestly you probably don't have to trim but it's just for extra security. But the only difference from what I see is the pro4x has the bilstein shocks.
@@jovanysmechtronixs3811 i ended up getting longer shocks as i would hear a bad thud everytime i went over a bump; works great now. I was just wondering if i need longer struts. But wasnt sure.
@@pattodigital No i only replaced the rear shocks as they were fully extended. They would make a clunking sound when i would go over bumps. Everything is now working properly.
Thanks helped a ton
Glad it did 😀
I know I'm truly late with this. What kind of long-term issues did the 3 in lift cause on the Titan. I have one and trying to decided
Nothing if done properly. If you have the PRO4X change the rear shocks to a little longer one's and that's it.
@jovanysmechtronixs3811 thanks I just have the 4x4 SV
@@charlesd.346 Nice 💯
Did you have to realign the truck
I didn't but it's best if you do
What kit did you order?
Rough country swears up and down nothing fits my 2021 pro4x 4wd and they wear the kit won’t work unless I source struts from somewhere else
👍
Omg!! Tú sabes mucho
👍
If you just wanted to level the truck would you just install the fronts and not the rears or is there a separate style leveling kit?
Theres another kit for that.
I did a 2 inch front and it leveled it. However I wanted my rear a little higher so I got a 1" block for the rear. But you are correct I think I might have to get rear longer shocks. Seem a little stiffer.
Are there any alignment issues with this kit (black tabular design)??
No there shouldn't be. Your stock alignment bolts should be fine to realign
Thumbs up for the video ! I have a question 👋 does this lift void's your warranty! I got a 21 pro 4 x and would like to do this too but I don't want to if it messes up with the warranty looks good thoug 👍
I wanna know if the lift kit will fit on my 21 titan pro 4-X? TIA
It will only void the warranty on the parts that were replaced, in this case the upper control arm. If your motor blows, trans goes out or power seats stop working etc. you'll still be covered under warranty.
👍
👍
So with that kit you can still use the factory shocks?
Yes you can but if you can upgrade to the 5100s it would be better.
@@jovanysmechtronixs3811 are the 5100s? longer or what is the difference ? I install the same kit on my 2018 titan SL but do hear some noise when passing bumps
I ordered a RC 3” lift for my 2020 P4X. Took it to a garage and they told me the 3” RC lift will not work with the Pro4x. Messaged RC after giving up trying to call them they said that it does not work with the P4X. Their website shows a P4X.
Anyway, please let me know how it works out. I haven’t sent the kit back yet. I’m assuming that since you have to trim the bell housing to make it fit they are saying it doesn’t fit.
Honestly you probably don't have to trim but it's just for extra security. But the only difference from what I see is the pro4x has the bilstein shocks.
Look at RC's website closer. It states the "lifted strut" option wont work with the Pro4X. Order the kit without lifted struts and it will work fine
What was your outcome? Did it install did you send it back
Its been a year now. Is the lift ok on the pro4x?
Yessir everything is working perfectly
👍
👍
Liked 👍
👍
Do you need a longer strut? Or does the oem work?
Oem works just fine for the front on the rear you should get a longer shock.
@@jovanysmechtronixs3811 i ended up getting longer shocks as i would hear a bad thud everytime i went over a bump; works great now. I was just wondering if i need longer struts. But wasnt sure.
@@SkyHawk2849 did you buy longer shocks for the front ? if so witch ones? the 5100?
@@pattodigital No i only replaced the rear shocks as they were fully extended. They would make a clunking sound when i would go over bumps. Everything is now working properly.
@@SkyHawk2849 I did the same for the rear, but I am considering replacing the fronts ones? what do you think ?
Did it need camber bolts to align it?
No but if u have them u can get a little more adjustment
Nope
I did a 3 in lift kit from RC and I send it back within a week. The worse kit for a Titan
What did you run into on issues ?
👍
What issues did you have??
👍
👍