So I put my 2.5 inch spacer kit on a 2023. I had to rotate the strut assembly 180 degrees to get the spacer studs to align with the factory holes in the truck. Is that a common thing to do?
We recommend installing aftermarket adjustable upper control arms on Pro4X models. Trucks with stock arms will notice contact between the control arm and coil spring bucket at full droop. Here is a link to our Z1 Upper Control Arms for your Nissan Titan: www.z1offroad.com/z1-products/z1-off-road/nissan-titan-front-upper-control-arms-by-z1-off-road-p-40601.html
By far, the best explained video out there. Thanks, man. Got the link to the rear lift blocks install??
Always get a new wheel alignment when doing this.
How much would your shop charge to do this just labor? I have to take it to a shop so it doesn't void warranty. 🙏🏼
So I put my 2.5 inch spacer kit on a 2023. I had to rotate the strut assembly 180 degrees to get the spacer studs to align with the factory holes in the truck. Is that a common thing to do?
Yep
What does it mean after you put the 3 inch lift kit you start hearing noise when you hit bumps from the front end and you hear a tump when accelerate?
Does that leveling kit fit a 2021 Nissan Titan pro4x
2016+ Nissan Titan
Does NOT fix XD models
Can I use my factory upper control arms?
We recommend installing aftermarket adjustable upper control arms on Pro4X models. Trucks with stock arms will notice contact between the control arm and coil spring bucket at full droop. Here is a link to our Z1 Upper Control Arms for your Nissan Titan: www.z1offroad.com/z1-products/z1-off-road/nissan-titan-front-upper-control-arms-by-z1-off-road-p-40601.html
@@z1off-roadwhat about 2wd models? Thinking of getting this for my 21 sv 2wd
What size is the one you installed?
Our leveling kit for the Pro4X it's 1.25" and for non P4X is 1.65"