Nissan Titan 3” Spacers Lift

2012 Nissan Titan SL 4x4

[@camperaddict_ky8985]

@Santana Hernandez thank for your great compliment. I’m using “Supreme Suspension 3” spacer lift kit, Moog Springs, Rough Country upper a-arms and their longer sway bar links, and Bilstein 5100 shock absorbers. Good luck luck with your upgrade. 🤙

[@ulisesalexander2837]

i realize I am pretty off topic but do anybody know of a good website to stream new series online ?

[@conorzayden8183]

@Ulises Alexander i use Flixzone. You can find it by googling =)

[@teslam3chennel]

Good DIY video Ky loves how it turns out👍

[@camperaddict_ky8985]

Thank Seth

[@watchmanexpert]

@@camperaddict_ky8985 i installed 3 inch on my Nissan Titan pro4x and now I have problem with my cv boot they broken after 6 months.... you have the same issue ?

[@camperaddict_ky8985]

@@watchmanexpert Sorry for late reply. It is about 1200 miles since I did this lifted and haven’t have any issue with my cv joint yet or other components yet. So I will be keeping an eye on it. Thank you for sharing.

[@eddyguerrero2825]

Just a question I just bought a 3" lift kit from RC also for a Titan but the spacers that came with the kit measure 1.5 inch or does it have to measure 3"?

[@camperaddict_ky8985]

My spacers also came with the measure of 1.5 inch. According to the manufacturer spec. .
.5 inch = 1 inch

[@mitsu2g4life]

Looks good. Front is 3 inches and back is 2 inch block?

[@camperaddict_ky8985]

Yes 2” blocks at rear. Thank

[@brianfong9088]

hey bro, did you do the lift in the rear as well or no? I am thinking of doing mine both front and rear. 3" front and 2" rear.

[@camperaddict_ky8985]

Yes I did the 2” block lifted and Bilstein 5100 Shock 1” long.

[@jmend8859]

What perch do you have the bilsteins at?

[@Mrkevi123]

Doesn't this change the orientation of the spring?
I see many leveling kits simply use bolt extensions

[@camperaddict_ky8985]

If you’re using the stock spring it doesn’t change its orientation. The aftermarket “Moog Spring” that I’m using does change its orientation because the top and bottom of each spring end at the same rotation.

[@jayg5968]

Awesome video!
I’m considering installing the same set up on my titan. How is it riding so far?

[@camperaddict_ky8985]

Thank you. So far the ride been great, just take a little time to get use to that 3” lifted.

[@jayg5968]

Nice. How about those upper a arms do you get enough clearance and how are they holding up so far?

[@camperaddict_ky8985]

No issue with the upper a-arms clearance after I trimmed down the edges of the upper shock towers. But I wouldn’t recommend you buying a Rough County a-arm because of the welding quality. If I have to do it all over again I would go with a much beefier arms.

[@bryantmeza511]

Hey man I have an 06 Titan I want to do the Lyft on the front you know
Where I can go to get that done

[@CoyoteRacingLLC]

Are your front cv axles ok being at that angle

[@ssplaya713]

Can you please put links for all parts used, thank you!

[@poobs9807]

Where u get the camper?

[@camperaddict_ky8985]

Camper Shells USA @ Stanton, Ca

[@juancarlosmariano5304]

Will this fit 2012 nissan armada?

[@camperaddict_ky8985]

I think the armada front end are the same as the Titan, im not 100% sure, you might want double check with the manufacture that sell that leveling kit.

[@jesusjacinto8907]

Whats a tire size

[@camperaddict_ky8985]

Mt 295/65/20, 35.25” tire according to Nitto Tire spec.