@Villian Nine Your lame Brother People are greatful and live life without putting others down. Doesn't feel good does it? Hope your life is Happy and you sleep with no worries. Can't barter when the world stops, unless you READY
To get rid of the light and bypass the security >>> Cut the yellow wire > Measure the resistance between Yellow and the Orange wire > Buy a resistor of that same value > Solder the resistor in between yellow and orange wire. The system will think the correct key is in and no more security light or problems. >>>You can also buy Passlock bypass kits that are easy to install.
Man I'd be saying the same fucking shit if the mother fucking thing wouldn't fucking start and left me fucking stranded. Thanks for posting this fucking video so I don't have to deal with this mother fucking problem when I get fucking stranded.
holding my breath but did on a '98 GMC savana van today. Edit: I see some discussion of the security light remaining on after this fix is implemented. The behavior of my vehicle HAS changed, is it normal for the security light to come on while im driving randomly after the fix, but be off every time i go to start the car? This is new behavior, and since the light isnt on when im starting the vehicle, I'm inclined to believe im in a much better place than i was before with regard to this security issue, but I'd love to hear if others see this post fix as well.
thanks for the play by play i was trying to put a resistor in but from your insight removed it and and a solder here and there and the 2001 chevy tahoe fired right up thanks again you saved my sanity lol
I connected the Yellow to the Orange and the 1999 GMC Suburban C1500 5.7L turned over...consistently with the light chug on the front of the turns. I feel the P1626 continues impeding the start cycle by cutting off the power to the spark plug. I may be pulling the Passlock out for circuit board review.
Did you check if you were getting fuel and the fuel relay was working for the fuel pump and did you look up the code P1626 and see what the code was Because i think The PassLock is For The Fuel Pump Relay and if it Start Right Up and Turns Right Off !! The PassLock Would Be it !!But i Would Look Up The Code !!P1626
OK, it did work but I had to just be patient resetting the computer.(turn key to on position, wait 11 min. till security light goes out and then turn of for 10 sec., repeat till security light is solid. took two times for me.) Saying fuck alot does help, thanks for help.
Did the passlock by-pass, security light stays on, still wouldn't start. Pulled the distributor cap off, it looked worn, replaced that and rotor, car ran two days, now not running again. Getting ready to pull the new distributor cap and spray with elec cleaner. Did the Passlock by-pass in such a way I can roll it back to original, not sure I will. I'll keep you posted. btw, checked fuel pressure, it's good.
Mine is a passlock 3 n yellow,black ,white wires coming off my ignition. Please let me know if I can do something similar like your video. I lost so much because of my car's security system coming on and will not go off
Francisco mariscal No You Have To Reprogram the Computer Or it Wont Work Just Make Sure You Watch Sasquads Video it shows you how to do it but make sure your battery is full Charge when you do the reprogram and it only takes about 45 min to do thanks for watching let me know if it works 4 you
Bro the struggle is real with this system 😂. Stupid system has all owners cussing up a storm. No telling how many times he has failed at it and threw money at the truck. This is a victory video!
If you don't mind the security light being on, you don't have to cut, splice ar connect anything. Start the truck up and while the truck is running, pull the three wire connector out of the passlock sensor. The body control module will see an in-service failure and set a code but will allow the truck to run and restart from then on. It will store a code but will allow the truck to start. Just don't ever clear the code. If you clear the code then the module reverts back to it's normal state and needs to see the passlock sensor to start,
thanks Brian swift have a 02 tahoe that have having problems in and off with the dam security system but gonna do tomorrow after work what ur saying here
All you do is start the truck up as it's running unplug the security box it's like right behind the ashtray after you unplug it while it is running turn the TalkBack off pull the key out put the key back in and start your truck is bypass the whole system
I believe 90% sure that I came across the exact same video and I'm still trying to find it now I had that problem 3 years ago and unfortunately my car right now the wires became loose and I figured out at the last minute but I can't remember the procedure I know it's that 30 minute thing or 10 minute thing but my battery is dead and in a parking lot and I got to figure out what to do but yeah I know that same guy you're talking about I wish you had a number on here so I can talk to you real quick
Ever figure out your security light? would a resistor between yellow and your orange/black solve that? otherwise the wiring loom to the left of your steering, run White/yellow to black with a 500-1k matched resistor.
Ben D. No i Really have not though about it! I Was just happy to get it to run Right Because the Truck Has a Python Auto Start On It and That's a Hole Lot Of Thinking About How to Go About Makeing the Auto Start To Work And Trying To Get The Light Off To Will See Maybe When i Get Some Time To See How To Get The Light Off !!
The light is on because the BCM wants to see a resistance value in that circuit. If it sees not resistance, it thinks that the resistor is open and turns the light on to let the driver know that there is an issue with the Passlock system. The reason its starts is because it is in a default mode which allows starting of the vehicle until the problem is repaired (there is also a code stored in the BCM for this). If the code is erased or the vehicle looses power the BCM will revert back to theft mode and the vehicle will not start (same issue that led you to this repair).
SlickestFlow lyricals i think i Left the battery hook up and i pulled the air bag fuse and No i did not used a resistor Or a Module ! when i reprogram the computer make sure that you battery is fully charge because it takes about a 1 hour And make sure you watch Sasquads Video to see how to reprogram your computer That"s his youtube name let me know if it works Ok
i hv a 95 suburban i bought from a guy who lost his keys so he tried to hot wire it so i replaced tha column an now all it does is click i changed tha starter bt still tha same thing so do u think its a security issue do u think this will work
Sean Murray i would say that did you see if the engine turns by hand ? when i had a security issue its was because i lost the key bob and then my battery was dead and when i put a new battery in it i had the security issue but it would start and then it would turn off ! it would start and stop right a way that's how i found out it was a security issue !! did you check the stater relay ? in the fuse Box Under the Hood ? i would check that !
yea i tried it with my hand tha motor turns the guy i bought it from said when he hot wired it it would start then turn right off an he did say to either get the security system removed properly or get the computer swiped i just dont kno what to do any more this is i dont see a security light on at all this is really geting frustrating i tried to look those other guys that helped you out on youtube but cant find them
Do you know if it has a chip key and if so its a Passlock 1 system and not a passlock 2 But did you check the stater wire if it has power to it and did you cross out the stater to see if it would crank ?
Benefical Musik i think it will work on a 2001 and i did not used a Resistor Or a Module ! And make sure that you watch Sasquads Video on youtube he show you how to reprogram Your Computer and it takes about a 1 hour and make sure your battery is fully charge! am sure it should work
I just did it on a 2001 Astro van and it worked incredibly well. But I did put a 3.4k ohm resistor between the cut Yellow wire heading under the dash and the orange wire with black tracer. I did not have to do the Relearn either, it just worked
2.2k resistor works fine..once connected leave the key on the ignition position for about 10 minutes it should automatically detect the resistance code and work
@@conjuntomontemayor93215 so I have a 2000 Chevy Monte Carlo, would I need to do this if I wanna install a push start button, new alarm system module, etc?
No it should not have done anything with the cam sensor ! The only thing that it does is by pass the Pass Lock Security Part ! Your Cam Sensor was getting Bad I Would Say Just Because Your Check Engine Light was not on after you fixed it and it Ran Right ?
Did You Watch Sacquads Video Too Because He Shows You How To Reset the Ecm on His Video and Did You Check The Relay For Your Fuel Pump Under The Hood in That Fuse Box ???
Amigo cómo le puedo desastibar el seguriti a mi auto cuando lo marca en el tablero no quiere arrancar asta que lo borra arranca mi carro es un Lumina modelo 95 automático
Yeah I tried the relearn . I have a different scenario going on . My truck was stolen. Who knows what else they did to it . I wish this would of worked for me . Thank you
Hey man, thanks, did u have to do the 10 min relearn after soldering those two wire ? This fucking thing is killing me, I've spent more trying to get this suburban to start than I did on the car itself. Thanks man
Watch the Sasquads Video it Takes about a Hour to reset your computer in 10 min then off then 10 min then off and then another 10 min but watch his video he will show you thanks for watching
Take off your positive cable and turn on your headlights for 10 minutes it will drain down the kam which is a keep alive memory in your computer then you can hook it back up and it should be fine
![[TH] 2024 PMGC League | กลุ่มสีเหลืองวันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/I_FdxGT3WV4/mqdefault.jpg)
BRO your killing me... FUNNY ASS HELL.. YOUR VERBAL EXPLANATION IS "BAD ASS" 👍😂😂
I laughed so hard I was crying. Great video! Please record everything you work on! 👍
Thanks Man I'm Trying Right ! But i Have a Bad Back ! Thanks For Watching!!!!!
@Villian Nine
Your lame Brother
People are greatful and live life without putting others down.
Doesn't feel good does it? Hope your life is Happy and you sleep with no worries. Can't barter when the world stops, unless you READY
To get rid of the light and bypass the security >>> Cut the yellow wire > Measure the resistance between Yellow and the Orange wire > Buy a resistor of that same value > Solder the resistor in between yellow and orange wire. The system will think the correct key is in and no more security light or problems. >>>You can also buy Passlock bypass kits that are easy to install.
Where can I buy kits?
@@FatalCorleone07Amazon
Thanks Buddy.Remove light bulb where anti warning lights iluminate.I do it all the time to pass state inspection.
Man thank so much I was able to figure it out God bless you
So basically I just have to cut the resistor off and splice these wires together? Thanks!
well I'll be damm. I been dealing with this shit for a hole year now. thanks so much dude
Any time Johnny Page Glad i Could Help Thanks for watching !!
Did it work?
Man I'd be saying the same fucking shit if the mother fucking thing wouldn't fucking start and left me fucking stranded. Thanks for posting this fucking video so I don't have to deal with this mother fucking problem when I get fucking stranded.
holding my breath but did on a '98 GMC savana van today.
Edit: I see some discussion of the security light remaining on after this fix is implemented. The behavior of my vehicle HAS changed, is it normal for the security light to come on while im driving randomly after the fix, but be off every time i go to start the car? This is new behavior, and since the light isnt on when im starting the vehicle, I'm inclined to believe im in a much better place than i was before with regard to this security issue, but I'd love to hear if others see this post fix as well.
Who cares it works
"you don't want that fuckin air bag blowin up in your face" hahahahahahahaha
Hey at least he looking out for us. 😂
Will this work if the Security light is solid?
thanks for the play by play i was trying to put a resistor in but from your insight removed it and and a solder here and there and the 2001 chevy tahoe fired right up thanks again you saved my sanity lol
I'm Glad It Work For You Too Thanks For Watching !
Does not work
I have a $99 I'm having that kind of problem with can you show me how to bypass the security link on this vehicle
Remove the instrument cluster n unplug the light bulb from the back of it.
I connected the Yellow to the Orange and the 1999 GMC Suburban C1500 5.7L turned over...consistently with the light chug on the front of the turns. I feel the P1626 continues impeding the start cycle by cutting off the power to the spark plug. I may be pulling the Passlock out for circuit board review.
Did you check if you were getting fuel and the fuel relay was working for the fuel pump and did you look up the code P1626 and see what the code was Because i think The PassLock is For The Fuel Pump Relay and if it Start Right Up and Turns Right Off !! The PassLock Would Be it !!But i Would Look Up The Code !!P1626
Just put a small piece of electric black tape on tha security light and problem solved 😂😅😂😅😂
Good fuckn video man bout to do this shit on my truck now
Did it work?
I like this guy, he keeps it honest
Thanks lilefn majik i hope it work for you man
OK, it did work but I had to just be patient resetting the computer.(turn key to on position, wait 11 min. till security light goes out and then turn of for 10 sec., repeat till security light is solid. took two times for me.) Saying fuck alot does help, thanks for help.
That's Great Josh Bennett Glad i Could Help Thanks For Watching Subscribe!!
My security light never turns off
@@dela2791did it work?
Looks like I'll be doing this on a 2000 S10 blazer. Thx bro.
>remember to pull airbag fuse...good idea.
Kool tayronachan Let Me Know if it Works !! & thanks for watching subscribe
Did the passlock by-pass, security light stays on, still wouldn't start. Pulled the distributor cap off, it looked worn, replaced that and rotor, car ran two days, now not running again. Getting ready to pull the new distributor cap and spray with elec cleaner.
Did the Passlock by-pass in such a way I can roll it back to original, not sure I will.
I'll keep you posted.
btw, checked fuel pressure, it's good.
My Yukon Did The Same Thing and My Rotor Was Bad and The Cap Look Good But It Was Not Good
I be mad like that too!!! mine won't start!!!!!! I'mma do the coil pack but imma do what you did!! This security system is some ass!!
Mine is a passlock 3 n yellow,black ,white wires coming off my ignition. Please let me know if I can do something similar like your video. I lost so much because of my car's security system coming on and will not go off
This is passlock 3
Can I bypass it with out having to deal with the reprogram computer stuff? .bc I'm having the same problem i have a 2000 gmc Yukon
Francisco mariscal No You Have To Reprogram the Computer Or it Wont Work Just Make Sure You Watch Sasquads Video it shows you how to do it but make sure your battery is full Charge when you do the reprogram and it only takes about 45 min to do thanks for watching let me know if it works 4 you
Off the top of your head how many times you think he said f****** in the whole video
Bro the struggle is real with this system 😂. Stupid system has all owners cussing up a storm. No telling how many times he has failed at it and threw money at the truck. This is a victory video!
If you don't mind the security light being on, you don't have to cut, splice ar connect anything. Start the truck up and while the truck is running, pull the three wire connector out of the passlock sensor. The body control module will see an in-service failure and set a code but will allow the truck to run and restart from then on. It will store a code but will allow the truck to start. Just don't ever clear the code. If you clear the code then the module reverts back to it's normal state and needs to see the passlock sensor to start,
Yea That's All Good Till You Have To Change The Battery Then it Wont Start Again That's Why i Cut The Wire and Did This Because My Battery Went Dead
How do you know it's the right wire? I have a 2003 Buick rendezvous same issue I don't see a yellow wire or an orange and black
Am not sure if it will work on a 2003 Gm Sorry i hope it will
thanks Brian swift have a 02 tahoe that have having problems in and off with the dam security system but gonna do tomorrow after work what ur saying here
I have a 99 Chevy suburban that will start up, but won't stay started, what can I do to fix it
i would say that the passlock system is bad watch the video and the other person and you will see
Yes you Can Just Watch Both Videos and it should Work Sorry i took so long to message you back
I’m having a intermittent issue of security light coming on and truck not starting too
Do the gm passlock reset it in the owners manual
All you do is start the truck up as it's running unplug the security box it's like right behind the ashtray after you unplug it while it is running turn the TalkBack off pull the key out put the key back in and start your truck is bypass the whole system
I believe 90% sure that I came across the exact same video and I'm still trying to find it now I had that problem 3 years ago and unfortunately my car right now the wires became loose and I figured out at the last minute but I can't remember the procedure I know it's that 30 minute thing or 10 minute thing but my battery is dead and in a parking lot and I got to figure out what to do but yeah I know that same guy you're talking about I wish you had a number on here so I can talk to you real quick
what's the chance of this working on 98 Chevy tahoe
Did it work?
Ever figure out your security light? would a resistor between yellow and your orange/black solve that? otherwise the wiring loom to the left of your steering, run White/yellow to black with a 500-1k matched resistor.
Ben D. No i Really have not though about it! I Was just happy to get it to run Right Because the Truck Has a Python Auto Start On It and That's a Hole Lot Of Thinking About How to Go About Makeing the Auto Start To Work And Trying To Get The Light Off To Will See Maybe When i Get Some Time To See How To Get The Light Off !!
The light is on because the BCM wants to see a resistance value in that circuit. If it sees not resistance, it thinks that the resistor is open and turns the light on to let the driver know that there is an issue with the Passlock system. The reason its starts is because it is in a default mode which allows starting of the vehicle until the problem is repaired (there is also a code stored in the BCM for this). If the code is erased or the vehicle looses power the BCM will revert back to theft mode and the vehicle will not start (same issue that led you to this repair).
Bro my safari van 2000 got the same wire and problem I'm thinking to do it 🤔
I hope it works for you Angel Make Sure That You Watch The Video In Sasquads to See How to Reset The ECM Right
My 2005 Chevy Silverado has the flashing PassLock light, but still runs and let's you put it in gear, help! There is a video on my channel.
did you use a bypass module or any kind of resistor? and did you unhook the battery when you were doing the wiring?
SlickestFlow lyricals i think i Left the battery hook up and i pulled the air bag fuse and No i did not used a resistor Or a Module ! when i reprogram the computer make sure that you battery is fully charge because it takes about a 1 hour And make sure you watch Sasquads Video to see how to reprogram your computer That"s his youtube name let me know if it works Ok
i did it and it didnt work the first couple of times. but this morning i gave it one last shot and boom. she's fixed. great vid
Any time SlickestFlow Lyricals Glad i Could Help Have a Good Day
i hv a 95 suburban i bought from a guy who lost his keys so he tried to hot wire it so i replaced tha column an now all it does is click i changed tha starter bt still tha same thing so do u think its a security issue do u think this will work
Sean Murray i would say that did you see if the engine turns by hand ? when i had a security issue its was because i lost the key bob and then my battery was dead and when i put a new battery in it i had the security issue but it would start and then it would turn off ! it would start and stop right a way that's how i found out it was a security issue !! did you check the stater relay ? in the fuse Box Under the Hood ? i would check that !
yea i tried it with my hand tha motor turns the guy i bought it from said when he hot wired it it would start then turn right off an he did say to either get the security system removed properly or get the computer swiped i just dont kno what to do any more this is i dont see a security light on at all this is really geting frustrating i tried to look those other guys that helped you out on youtube but cant find them
he said something like the security system is not leting the starter solenoid get power
an this truck doesnt have a starter relay i looked everywhere an cant find it google says it dont have 1 either
Do you know if it has a chip key and if so its a Passlock 1 system and not a passlock 2 But did you check the stater wire if it has power to it and did you cross out the stater to see if it would crank ?
you rock you cursing is what fixed it fuck it lol i like it ctfuckup!
Any Time Cobby Thompson Thanks
Im not gonna say a fuckin word.........
will this work on a 2001 Chevy Silverado? or will i need a resistor?
Benefical Musik i think it will work on a 2001 and i did not used a Resistor Or a Module ! And make sure that you watch Sasquads Video on youtube he show you how to reprogram Your Computer and it takes about a 1 hour and make sure your battery is fully charge! am sure it should work
I just did it on a 2001 Astro van and it worked incredibly well. But I did put a 3.4k ohm resistor between the cut Yellow wire heading under the dash and the orange wire with black tracer. I did not have to do the Relearn either, it just worked
Would love some more in depth help with passlock 2 I'm replacing my ignition and can't get the security light to stop flashing
Me too
2.2k resistor works fine..once connected leave the key on the ignition position for about 10 minutes it should automatically detect the resistance code and work
@@conjuntomontemayor93215 so I have a 2000 Chevy Monte Carlo, would I need to do this if I wanna install a push start button, new alarm system module, etc?
still works? security light ever go off?
+Matt Erickson Yes it still work with the security on
Did you get it too work ?
Excelente 👍🤔
a few days after I did that, my check engine light came on. code po340 camshaft sensors. do it have any thing to do with it ???
No it should not have done anything with the cam sensor ! The only thing that it does is by pass the Pass Lock Security Part ! Your Cam Sensor was getting Bad I Would Say Just Because Your Check Engine Light was not on after you fixed it and it Ran Right ?
test ignition switch 2008 Chevy
Probably the distributor is bad.
it worked for me.
Cool Man Glad i Could Help You
i have 99 suburban ... the security off now.. but still wont start ill do this wire thing in the morning ..
Cornelius Malone did it work for u bro
So I did this and my security light is blinking still and won’t start
Did You Watch Sacquads Video Too Because He Shows You How To Reset the Ecm on His Video and Did You Check The Relay For Your Fuel Pump Under The Hood in That Fuse Box ???
@@AutoBikeTruck so I did the program it it starts again. But light is on. From what I hear is it will stay on unless I put a resistor
Will this work on 03 suburban
Not Sure But i Think it Might Kush master
Im.having that problem with my chevy,1500 still not working
what year is it and did you watch both videos James Johnson ?
Amigo cómo le puedo desastibar el seguriti a mi auto cuando lo marca en el tablero no quiere arrancar asta que lo borra arranca mi carro es un Lumina modelo 95 automático
thanks buddy this helps me alot
Any Time Glad i Could Help
I need a fix like that for an olds Alero 2.4 2000 pls help
Didn’t work for me 1999 Silverado new body style was stolen put new key assembly did this trick still will not clear the security light
Did You Watch Both Videos and Reprogram The Ecm it Takes About 1 Hour To Do This
Yeah I tried the relearn . I have a different scenario going on . My truck was stolen. Who knows what else they did to it . I wish this would of worked for me . Thank you
was your security light blinking on and off
No it just stay on with the truck running
My Truck Runs With the Security Light on Still Runs Mint
Yes sometimes on and sometimes blinking, both ways and still no start
But it started and turn right off Right ?
Hell yeah man
how did you reprogram the computer?
Yes i Did Reprogram The Computer !!! Watch The Sasquads Video He Shows You How to Do It Good Luck! But it Works and it takes About a Hour to Do It
imma try in the morning
Did You Get It To Work ???
No couldn't find wire
This does not work on my 2000 gmc sierra. Mine is the special model I guess.
this should work on your truck watch the video and the sasquads video
Did you get your truck running ? josh Bennett ?
Mine didn't turn on
Hey man, thanks, did u have to do the 10 min relearn after soldering those two wire ? This fucking thing is killing me, I've spent more trying to get this suburban to start than I did on the car itself. Thanks man
Yes You Have to Do The Relearn Watch The Other Video i Hope it Works For You SHASHABOOEY !!
how did you reset your computer
Watch the Sasquads Video it Takes about a Hour to reset your computer in 10 min then off then 10 min then off and then another 10 min but watch his video he will show you thanks for watching
Take off your positive cable and turn on your headlights for 10 minutes it will drain down the kam which is a keep alive memory in your computer then you can hook it back up and it should be fine
I don't see the 3 wires for the security
what year is your truck ?? Casey Friloux
auto focus man, auto focus
Your So Right Big Evlwhtman
my 2000 gmc is make a racket might be something computer I have a video can you have a look it 14 sec long
That security shit is garbage
Mine is doing the same thing... I'll be doin this real soon