I have a 19 model and no matter how much I adjusted my clutch at the handlebars I still had slack =/ either that or it would feel way off so I'd loosen it back up! (This helped me thank you!!!)
Great video, thank you so much. Any idea where I can find the ruber adjustment collar and rubber cover at 1:47? They don't have it anywhere on the OEM Parts list. I checked the "Handle Switch Lever" section and it's missing.
Im trying to put a new clutch lever on my yfz450 but the cable is too long and doesn’t fully engage the clutch when i pull the lever , do i adjust at the half way down of the clutch cable?
Just replaced the clutch plates and friction plates on a 2007 yfz450. Now it's hard to find the neutral and also noticed that when down shifting from 3rd it skips 2nd and goes to 1st gear. Any thoughts? Thank you
Putting the clutch cable back on to that clamp is near impossible for me. 06 yfz and I tell ya what 10-15 minute job literally is taking me hours to just get the cable on to the clamp.
So clear so professional. Please don’t stop making videos!!
I have a 19 model and no matter how much I adjusted my clutch at the handlebars I still had slack =/ either that or it would feel way off so I'd loosen it back up!
(This helped me thank you!!!)
Amazing!
Very helpful video thank you !
Perfect video thanks.
Great video!!
Great video, thank you so much. Any idea where I can find the ruber adjustment collar and rubber cover at 1:47? They don't have it anywhere on the OEM Parts list. I checked the "Handle Switch Lever" section and it's missing.
Same
How do I know if I need to replace the cable adjusting bolt ?
Adjust at cable will it let out sooner mine let's it go at the very end
The front brake handle on my 03 Yamaha Kodiak 400 4x4. Is difficult to press it I replaced the brake fluid and Bleed the air out. Still feels rough.
Probably an issue with the master cylinder. Perhaps there's dirt in it.
Im trying to put a new clutch lever on my yfz450 but the cable is too long and doesn’t fully engage the clutch when i pull the lever , do i adjust at the half way down of the clutch cable?
Adjust from motor end first. Then fine adjust with lever
i just got my 450 yesterday and it feels like you are using a grip strengthener
Would adjusting the tension of the clutch cable stop it from rolling forward while in first gear with the clutch engaged?
Wonder the same
It either will or it won’t
@@loststallz8893 after 2 years this is the exact response that I needed
@@JPANAH lmao I didn’t think you would seen it I was just sayin it’s one of those things you don’t know if that’s the issue until you try it .
Why wont my neutral light come on now after preforming a lever switch? What did i do wrong?
What kind of protaper handlebar pad is that? I've only ever seen the bar ones and rectangular ones. Even on their website I can't find that one.
That’s the stock bar pad that comes with the quad
Hey my clucth cable seem stretched I bought a new 1 but still won’t tighten up idk what to do
Thankyou
Any videos of a throttle cable on a yfz450r? Thanks in advance
🔥🔥
My clutch cable on my 2008 broke off on the clutch control arm when I was riding smh.
What is that lever that you moved here 6:41? Is it part of the clutch lever?
It's a parking brake, specific to that model.
They typically don't, but this is an ATV. :)
@@PartzillaParts why my clutch is hard to pull ? i have yfz 450r
Just replaced the clutch plates and friction plates on a 2007 yfz450. Now it's hard to find the neutral and also noticed that when down shifting from 3rd it skips 2nd and goes to 1st gear. Any thoughts? Thank you
Does this apply to an early/mid 2000s blaster?
👌🏼💪🏼
Putting the clutch cable back on to that clamp is near impossible for me. 06 yfz and I tell ya what 10-15 minute job literally is taking me hours to just get the cable on to the clamp.
I’m having the same issue, I can’t get the cable on that little hook. How did you get it?
HELP I move the adjustment in 450r 18 and now it make a weird noise when I hold the clutch need help going camping next week