Love the pipe! but try to use a wooden tenon to connect the bowl to the stem or make the hole in the bowl bigger so you can fit the stem into it, then hammer it so it would be tightly snug. The glue will eventually melt due to the heat of the bowl when smoking.
Pretty good. But one thing i would try and experiment abit is the bowl and the stem joint. Could sink the stem inside. Could be better than using glue. But love the art of it ^_^
Nice display piece should consider building a clear case to show it off but should consider joining the pieces with less glue and use hollowed dowel rods instead of just straight glue also use wood glue but at a minimum
I really enjoy videos showing the crafting of interesting items. It was fascinating watching your work with a hand-held sander to round out the block pieces. The finished pipe was beautiful and it was a very satisfying conclusion to the video to see the pipe tested.
Way too much glue!!! will come apart with heat from smoking?? Is it good for your health?? Beautiful pipe just hope it holds together and is not toxic Th
Wow, that polished up very nicely. Most of the build looked pretty rustic, but it all came together. I had to laugh that we have a very similar limited workbench and set of tools. :-D
Hello can I make a suggestion that will save you time and make it easier to build your stems for that pipe...Go and find sumack and all you have to do is take the bent stem and take a metal wire and heat it in a fire or a tourch and pass it through the centre of the stem.
Hello! It's not a metal, it's paper with a shiny metallic coating. Unfortunately I don't have the tools to put on a real metal ring :( I only used a colorless varnish :D
schön gebaut die pfeife aber unpraktisch bei der reinigung. gibt es überhaupt so lange pfeifenreiniger ? mit zigaretten tabak ist pfeife rauchen echt wiederlich ;) danke für das video
I fully agree with the rest. Good craftsmanship, but poor use of CA glue to piece it together. Since you obviously have a good handle on shaping the wood, it should be no big deal for you to craft the bowl so that the stem press fits into the bowl without CA glue. Ive been thinking of doing the same thing, but am still figuring out if the use of glue on the stem will be a problem, since in theory this part will remain much cooler than the bowl. Despite this. Great work.
Love the pipe! but try to use a wooden tenon to connect the bowl to the stem or make the hole in the bowl bigger so you can fit the stem into it, then hammer it so it would be tightly snug. The glue will eventually melt due to the heat of the bowl when smoking.
Homie smokin on the super glue OG
It was definitely something some high octane 👌🤣
High octane 😂
you are the best bro! from Ethiopia
Lol, the music, I've heard them elsewhere before. Man of culture.
love how you made it. love to get my hands on something like that.
I have been making pipes lately and this is my next project
Pretty good. But one thing i would try and experiment abit is the bowl and the stem joint. Could sink the stem inside. Could be better than using glue. But love the art of it ^_^
Well done my‘ol mate 👏👏👏👏👏👏👏👏👏👏 You were first….and…ahead of the Vauen pipes….beautiful work indeed 😊👍👍😉💨💨💨
WOW nice job Isaac ,i have to make one now,thanks.
Next level genius!
Nice display piece should consider building a clear case to show it off but should consider joining the pieces with less glue and use hollowed dowel rods instead of just straight glue also use wood glue but at a minimum
I really enjoy videos showing the crafting of interesting items. It was fascinating watching your work with a hand-held sander to round out the block pieces. The finished pipe was beautiful and it was a very satisfying conclusion to the video to see the pipe tested.
The use of cigarette tobacco at the end lol. But beautiful job!
Que trabalho maravilhosoooo! Os detalhes impecáveis
Impressive work! I love how well put together everything is.
😎🖖👏👏👏👏👏. Maravilhoso.
Faço meus cachimbos também.
Parabéns.
Um belo cachimbo feito
Que dá hora que ficou mano!!! Parabéns pelo trabalho! E o vídeo ficou muito gostoso de assistir...! 🔝 🎩
Way too much glue!!! will come apart with heat from smoking?? Is it good for your health??
Beautiful pipe just hope it holds together and is not toxic
Th
It would be a display piece if anything
It may be a display piece yes but what glue can be used to be able to actually use it to smoke out of safely?
With some research and anyone can correct me but it seems animal hide glue might be the least toxic solution?
Ficou Perfeito! Ótimo Trabalho!!!!!
Wow, that polished up very nicely. Most of the build looked pretty rustic, but it all came together. I had to laugh that we have a very similar limited workbench and set of tools. :-D
Muito lindo! O cachimbo ficou ficou ótimo também! 😉
Processo e resultado incríveis. Parabéns mano
из за обилия цианокрилатного клея в производстве, покурить такое я бы не отважился
Lindo demais, PERFEITO! Parabéns 🤍
Ficou bonito demais mano, parabéns!
Ficou lindo
You get an extra high from smoking the glue
Muito foda mano, vc eh monstro!
Parabéns!! Ficou maravilhoso 👏
Hello
can I make a suggestion that will save you time and make it easier to build your stems for that pipe...Go and find sumack and all you have to do is take the bent stem and take a metal wire and heat it in a fire or a tourch and pass it through the centre of the stem.
lindo demais!!!!! trabalho incrível 👌👌👌👌
Ficou incrível!!!! Que arte
Good job 👍
Where did the brass band bit come from on the finished product?
lol indeed
Que es ese líquido que le pones para que pegue?
What species of wood did you use please?
Is that super glue he is using to glue the pipe togather
Wonderful! What wood glue do you use?
Not bad, but by now I hope you do a better job of the joint where the stem meets the bowl.
First off WHERE THE HECK DID THE BRASS RING? Caudr I'm going to be making something like this for a friend.
Hermoso ❤
Why is it no one shows steaming pipe stems, too many short cutting a proper stem
I'm pretty sure that wooden pipe is called the churchwarden
Muito foda!!
Nice work my dude! How did you add that metal band? And what did spray to give that nice color?
Hello! It's not a metal, it's paper with a shiny metallic coating. Unfortunately I don't have the tools to put on a real metal ring :(
I only used a colorless varnish :D
Genius
❤❤❤❤ilove habibye
Qual madeira você usou
muito fofo viu
schön gebaut die pfeife aber unpraktisch bei der reinigung. gibt es überhaupt so lange pfeifenreiniger ? mit zigaretten tabak ist pfeife rauchen echt wiederlich ;) danke für das video
When and how did you put that brass piece on?
Using this amount a glue on this pipe, spraying lacquer as a finish, and finally packing it with cigarette tobacco. It is a nice looking pipe anyways
I’m sorry but wildling would have been sooo much easier and faster. I absolutely hate using those files. Nice pipe 🤩
They didn't have jigsaws in medieval times , i want to see how they made such a pipe without modern tools
They did
i don't know if i would be smoking out of that. ok for a costume but that amount of glue can't be good.
1:29 Oh my gawd…
I fully agree with the rest. Good craftsmanship, but poor use of CA glue to piece it together. Since you obviously have a good handle on shaping the wood, it should be no big deal for you to craft the bowl so that the stem press fits into the bowl without CA glue. Ive been thinking of doing the same thing, but am still figuring out if the use of glue on the stem will be a problem, since in theory this part will remain much cooler than the bowl. Despite this. Great work.
Probably not smart to smoke out of a pipe you superglued together, but what do I know
one pipe to smoke them all...
Bom dia meu amigo, vc tem algum contato para que eu possa falar contigo?
Не очень удачная идея садить на клей место где нагревается табак😄
👍👍
super glue hő hatására elenged
👍👌😎🍺
nice pipe just not the way i would do it
только мыльные пузыри через неё пускать
Perdón, pero… lindo trabajo de hobby… pero un montón de maderas pegadas con tabaco para liar cigarrillos… no me gusta