your nickname is the program 😁😁.....Everything doesn't always have to look perfect , Not everyone has all the tools at home ... the result has to be right.....I liked the video thanks bro
This is the video I been looking for the only other video I found dude took the whole entire gun apart and I wasn’t confident I could do it without wrecking my investment thank you so much for the video brother (sorry about that pesky damn pin) 😂😂😂😂 took longer to take that out then to take the valve block out 🤣
I lost the springs taking apart a tr50 it has a simulator styled interior a little different but the back to the valve block is the same. Lessened learned.
Hey bro what size of washer can I use for a co2 restrictor replacement and can I get it at a auto store like O riley,s auto parts I need your expertise to fix my umerex please
I just drilled mine out to 3/16 - reinstalled it. Defiantly a difference. Shoots the rubber steel balls so fast you can't see them. Shoots the pepper balls so fast, not even a trace.
Those pins go out the other way! From the RIGHT side you push them out through the LEFT side. The exact opposite way that you were doing them in the video. And they go out like 10 times easier
I did this mod to 2 of the today. Awesome. Thank you for the info. Other people doing the same videos now but harder. Take apart whole gun. This was way easier. You are a genius. Rock on my guy
Gran video me fue de mucha alluda ya que yo tampoco tengo las herramientas lo mejor es la información,mi unica duda hay un comentario que dice que se oe vacia el co2 cuando lo pincha después de hacer ésto corro ese riesgo si lo modifico?ya que no tengo dinero para comprar dos hdp y no quisiera arruinar mi compra ,si es asi agradeceria otro video que expliques como hacer para que no pase
guns with the Pepperball brand name on them are more expensive than that one, but they make ammo that looks like a plastic version of a civil war era elongated mini ball slug and they have a rifled barrel for better accuracy and longer range. The trade-off is that the gas cartridge is a few grams smaller.
yes and no if you have the co2 chamber that has the washer that goes behind the co2 then yes if not you may need to fashion one yourself or buy the power pin upgrade kit that comes with one.
This is by far the worst video ever. He called the nail a screw. Called the screws nails. And you don't need your screw contraption all you had to do was grab the knob with needle nose pliers. Called his drill bit's screwdrivers. I'm pretty sure you should have extracted the pins out the other way. Pretty standard bruh. I don't think that plastic and seals are gonna last long with a whole CO2 freezing cold blasting through it. I was cringing the whole time. Anyhow, I guess experiment enough and eventually one will succeed and get it right. Don't take my comments personal bruh, we are all here to help each other. Keep at it My Man!
@@Sicsicka 1 really big spring... Has to come out anyway. As you stumbled on doing. The drill makes this mod irreversible. No crony before and after. Seems suspect for all the damage done. I
@@bongkaos5519 First off I'm not a professional at anything or claim Tobe. Second everyone has a right on my channel to voice there opinions. Thank-you for the feedback
@@Sicsicka can you answer the questions? Why didn’t you at least crack the c02 to let people know it holds air, where you high or drunk? That’s not really good information/ kinda dumb if you do it a mess up your gun ; thanks
OMG!!!! edit your videos!!! this is the first video I ever watched of yours and it's probably in the top three worst videos I've ever seen on TH-cam nobody wants to see you struggling with the gun because you don't have the proper tools! I couldn't even make it through 11 minutes because all I'm doing is watch you make these half-ass tools with rubber bands and screws and struggle for 10 minutes to get a pin out! this is a great video if you want to go to sleep
Mir graut es davor,diesem Hobbyverbastler bei seinem absolut unprofessionellen tun zuzusehen...das tut echt weh...
Thankyou as always everybody's opinion stays on my channel and I have pinned it to the top.😃
The roll pins are supposed to be knocked out from the right side and removed from the left
your nickname is the program 😁😁.....Everything doesn't always have to look perfect , Not everyone has all the tools at home ... the result has to be right.....I liked the video thanks bro
Remember all firearms and most dowel pins remove from right to left. Makes it a lot easier to remove them.
This is the video I been looking for the only other video I found dude took the whole entire gun apart and I wasn’t confident I could do it without wrecking my investment thank you so much for the video brother (sorry about that pesky damn pin) 😂😂😂😂 took longer to take that out then to take the valve block out 🤣
I lost the springs taking apart a tr50 it has a simulator styled interior a little different but the back to the valve block is the same. Lessened learned.
Amazing video. Thank you so much for it!!!!
Your video was quick and easier than other ones I seen that's cool bro😎👍
Hey bro what size of washer can I use for a co2 restrictor replacement and can I get it at a auto store like O riley,s auto parts I need your expertise to fix my umerex please
thnx bra, just ordered 1. I'm gonna meow it too
I just drilled mine out to 3/16 - reinstalled it. Defiantly a difference. Shoots the rubber steel balls so fast you can't see them. Shoots the pepper balls so fast, not even a trace.
How many shots per CO2 cylinder do you get out of that now
Without doing a chrony you're just guessing.
@@joco6870 10 very effective
Those pins go out the other way! From the RIGHT side you push them out through the LEFT side. The exact opposite way that you were doing them in the video. And they go out like 10 times easier
I did this mod to 2 of the today. Awesome. Thank you for the info. Other people doing the same videos now but harder. Take apart whole gun. This was way easier. You are a genius. Rock on my guy
What was your joule increase after mod
yes but your power drops fast@@jayrock363
I've seen people use the tips of needlenose pliers to take that brass part out.
Gran video me fue de mucha alluda ya que yo tampoco tengo las herramientas lo mejor es la información,mi unica duda hay un comentario que dice que se oe vacia el co2 cuando lo pincha después de hacer ésto corro ese riesgo si lo modifico?ya que no tengo dinero para comprar dos hdp y no quisiera arruinar mi compra ,si es asi agradeceria otro video que expliques como hacer para que no pase
guns with the Pepperball brand name on them are more expensive than that one, but they make ammo that looks like a plastic version of a civil war era elongated mini ball slug and they have a rifled barrel for better accuracy and longer range. The trade-off is that the gas cartridge is a few grams smaller.
Just an FYI it's a lot easier to to use a pair of needle-nose pliers than two screws
How many shot do you get our of a cartridge now
How is it doing since the mod?
Just work to the 7,5 joules version. The 11 joules dont have that valve.
The 11J have a restrictor down in the tube you remove. 7,5J version doesn't have that
Only available in the US in Orange?
I watched a 27 min video of a gun modification and there is no demonstration of the gun after the mod. Fucking crazy bruh.
I plan on cleaning out my garage and doing more test fire videos
Can u do a chronograph test just to see how much power u have.
I dont have a chrono yet.
I did this mod on my HDP50 and it worked out perfect. Do you think I can do the same thing on my TR50?
yes and no if you have the co2 chamber that has the washer that goes behind the co2 then yes if not you may need to fashion one yourself or buy the power pin upgrade kit that comes with one.
Why not use some pliers still twist the cap off instead of two nails
Not one shot.........booooo
Is this a 7.5J version?
Yes and not anymore
2 more taps with elbo grease would have got that pin out.
Just sayn....
Never pull a 📌
I do thank you for the information.
Saw this upgrade done somewhere else. Gets 8-9 shots per CO² first 6 over 20j with heavy steel balls
Just remove the restrictor! Dont need to open the gun or anything.
How?
Como? plis
what ammo is the best awesome vid btw bud shhhhh be quiet
I like the rubber coated steel.
Rube Goldburg has nothing on you!
@RayOlivera you are trying to be funny correct?? If so you're not very funny
So you removed the block have you had issues at 25:32
Thanks for the question no I haven't had issues. But if you want multiple reloads and shots then don't remove it because it kills the co2 fast
@@SicsickaI heard it's gains power and more rounds if u just drill the 3/16ths hole
@bingbangbobaruni I think you get more shots and more power than originally there but is that your goal
Hey bro I did all that and now when I cock it the co2 just empty,s automatically letting all the air out ? What's up with that
You need to make a small washer disk to pu behind c02
th-cam.com/video/L5ES1-1NX00/w-d-xo.htmlsi=ALs_YZlhUtXHsjFb
www.ebay.com/itm/313247114381?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bhkdzg1mqlq&sssrc=4429486&ssuid=3TUt5AYiRu6&var=&widget_ver=artemis&media=COPY
There is a disk you can buy and hammer it in but I make my own out of washer blanks the hole needs to be 7/64 or less
@@Sicsickayou mean co2 restrictor
Spast !!! 🤔🙃🙄🤨
This is by far the worst video ever. He called the nail a screw. Called the screws nails. And you don't need your screw contraption all you had to do was grab the knob with needle nose pliers. Called his drill bit's screwdrivers. I'm pretty sure you should have extracted the pins out the other way. Pretty standard bruh. I don't think that plastic and seals are gonna last long with a whole CO2 freezing cold blasting through it. I was cringing the whole time. Anyhow, I guess experiment enough and eventually one will succeed and get it right. Don't take my comments personal bruh, we are all here to help each other. Keep at it My Man!
TOSS THE LEATHERMAN JUNK NEXT TIME YOU ARE NEAR A GREEN DUMPSTER!
Just punch the pin out.... Stop trying to pull.
Just sayn
The right tool for the right job makes you look professional.
Instead you look like a tool
Now
I
Know
Not
How
Its
Done
I agree that would be a nice way to do it but my way means you don't have to take the gun all the way apart and loose springs.
@@Sicsicka 1 really big spring... Has to come out anyway. As you stumbled on doing.
The drill makes this mod irreversible.
No crony before and after.
Seems suspect for all the damage done.
I
@@bongkaos5519 First off I'm not a professional at anything or claim Tobe. Second everyone has a right on my channel to voice there opinions.
Thank-you for the feedback
@@Sicsicka can you answer the questions? Why didn’t you at least crack the c02 to let people know it holds air, where you high or drunk? That’s not really good information/ kinda dumb if you do it a mess up your gun ; thanks
OMG!!!! edit your videos!!! this is the first video I ever watched of yours and it's probably in the top three worst videos I've ever seen on TH-cam nobody wants to see you struggling with the gun because you don't have the proper tools! I couldn't even make it through 11 minutes because all I'm doing is watch you make these half-ass tools with rubber bands and screws and struggle for 10 minutes to get a pin out! this is a great video if you want to go to sleep
Fue muy útil para mi este video y seguro que para muchos más no todos tenemos todas las herramientas del mundo y esto simplemente es arte