Thank you for taking the time and explaining this for us simple folks to understand. My 2013 S7 is having Trans issue and I believe the harnesses are bad. This was very helpful.
I really grateful to you . You have given us very important Information about these valve . I subscribed your channel . Please make videos like this . 🙏
Very nice explanation sir, am from India, can you please help me getting those original solenoid and repair kit. getting clutch pressure too high error.
Hi Ali.. I have Audi 7 2013.. transmission working absolutely fine just I’m getting error Gear is overheating change driving style .. and fault code is P1765 hydraulic sensor 2 adaptation limit reached .. pls advise what could be the actual problem??
Hi i changed repair kit and tcm ,checked cluth pack car still giving k1 ,k2 pressure high .jerking and turn off when i put it on reverse or drive please any advise
Hi Ali I have codes P285000 Shift Fork D unrequested movement P187F00 Gear Actuator position deviation do you know what could be causing this? sensor in gearbox or which part of the mechatronics unit?
Thank you for taking the time and explaining this for us simple folks to understand. My 2013 S7 is having Trans issue and I believe the harnesses are bad. This was very helpful.
Happy to hear that good luck
Thank you for this interesting information:)
I really grateful to you . You have given us very important Information about these valve . I subscribed your channel . Please make videos like this . 🙏
Good one 👍
Thank you
Hi! Nice video, I Have a doubt what voltagem thoses valvules Works?
Very nice explanation sir, am from India, can you please help me getting those original solenoid and repair kit. getting clutch pressure too high error.
Hi Ali.. I have Audi 7 2013.. transmission working absolutely fine just I’m getting error Gear is overheating change driving style .. and fault code is P1765 hydraulic sensor 2 adaptation limit reached .. pls advise what could be the actual problem??
what is this cpm tester.. You have a link to buy
Hi i changed repair kit and tcm ,checked cluth pack car still giving k1 ,k2 pressure high .jerking and turn off when i put it on reverse or drive please any advise
Thanks for the video do you have any idea what could be causing error P17E 00 -Electrical malfunction. 8940 -Valve 3 in transmission part 2
Same thing as this video. There's a repair kit available
That's not the clutch speed sensor, that's the transmission fluid temperature sensor.
Hi Ali, kindly, do you have workshop, because, I have some issues related to Audi DSG, and searching a qualified workshop.
100% = 12Volts?
Hi Ali
I have codes
P285000 Shift Fork D unrequested movement
P187F00 Gear Actuator position deviation
do you know what could be causing this?
sensor in gearbox or which part of the mechatronics unit?
Hi , were you able to fix your car.! Are you located in UAE!
Yes
طيب بما انك عربي ليش كاتشرح بالعربي
Please don't buy cheap Chinese kit or solonids , buy the original solonids ill share the supplier for that.
Can you share the supplier?