Recommendation: Don't have afterburner overclocks boot with windows until you know you have a stable overclock. Don't want to run into a situation where you have an unstable overclock that keeps crashing your computer every time you boot windows before you can correct it.
Singoli e Album in ANTEPRIMA I got my RX 580 8g single 8pin power connector to 1450 core and 2250 memory on stock voltage. The only slider you have to increase is the power limit % slide that all the way up. You shouldn't have to touch the voltage. And in heaven I ran 1080p resolution
Jarad C without touching voltage and power limit i only it 1420 on core clock e 2250 on memory clock, i have an aorus with only 8 pin connector, btw i want to try your settings
Singoli e Album in ANTEPRIMA slide power limit up and go 1450 on core and you should be good. I believe he only got his to 1500 is because he's under 720p and in heaven running windowed mode. I wouldn't try it
Cheers. Followed the tutorial for my RX 580 using Afterburner as described. I ran the GPU clock up to 1400MHz and the Memory to 2300MHz with Voltage at +50 it runs very stable showing a voltage of 1181mV and after 30 minutes of running Unigine Valley the temperature is a steady 76c. The card I have is a single 8 pin connector and all looks good. Now off to do some gaming.
@@amanda.collaud there is no true story, all the stories are skewed, all religions have lots of morals and beliefs in common and that's what truly matters. I believe that's what religion truly is and that God and Jesus and the bible was made up to get more people interested.
got a chinese rx 580 8gb (maxsun rx 580 overseas edition m.2 8 gb bios) and bought thermal pads for the memory and oc'd to 1475 2250 mem oc and stays cool under 60c with fans at 80%. literally the best 100$ i spent ever in my life.
I have the MSI RX 580 8 gb Armored OC, and got mine running at 1500 Mhz and 2250 Mhz on mem and run powerlimit 50% and +43 Mv, I used to run lower voltage and it seemed to run I added a little. It even seem to run with no voltage but wanted to ensure 100% stability. I have been running this now for probably over a month with out issues. Temps have been really nice, 60 - 65C in most games because I run at 60 fps only my games so in many cases the card is not working that hard. If I push it as hard as I can I think I hit 67 C or 70 maybe, cant recall now but the temps has been good.
Awesome video, so far I'm on 1465mhz GPU clock and 2250mhz memory clock, thank God for MSI twin frozr *EDIT*: Those settings worked just fine in Unigene Heaven, but absolutely stroked out in a game. Looking more at 1450mhz GPU and 2150mhz on the memory. :(
@Hunk SAS ok after about 2 1/2 hours of playing COD it crashed on me. I lowered themem clock to 2165 and I will test tonight. I played for an hour and it was fine. Maybe you can try that
Thanks mate this really helped a lot. Ran my own card at 1500 Core and 2250 Memory with absolutely no issues. Whatever I was doing wrong before I consistently got crashes.
@@opoxious1592 I have the same gpu on the vid with Samsung vram 1500mhz core+2250mhz memory max voltage at radeon settings which is 1.2v and max power limit
@@opoxious1592 Yes. In my case it is weird because my OC is lower when using 860w seasonic platinum psu but when I used 550w seasonic gold psu, I get it stable at 1500core and 2250mem.
@ hmm, i think i got a bad card or sth, i can only reach 1336 with 1080mv, all it can do with a highest clock of 1436mhz and 1185mv, and i dont even know its safe or not lol
Nitro+ Special Edition 1500MHz Clock and 2250MHz memory (Micron). Auto Voltage +40% power. Stable in Witcher 3 (everything maxed out) at 65 degrees 70% fan speed. For people who want good silicon I recommend getting the Special Edition as they have binned GPU.
Great numbers! What interface are you applying Auto Voltage in? I'm using Radeon's Trixx app to set clocks and can manually change voltage but don't see an "auto". Thanks!
Pretty stable and okay w/ 1425mhz core/2075 mem clock speeds. Stable at 75c temps. Was able to achieve 1500mhz/2100mhz, but ran at 85c so I lowered back since the games I play aren't too gpu demanding.
Sapphire Nitro + Special Editon rx 580 8gb, 8 + 6 pin for power, 1501mhz core clock and 2250 memory clock, voltage under 1.24v. Stable in the Shadow of the Tomb Rider.
I've the same one but push the memory to 2300. Some games are stable like overwatch but some just begin crashing unless I turn down to 2200 like witcher 2
You should replace the thermal paste with something more efficient to keep the temperature down. Running at 80c and above is quite hot and here I thought 74c is quite enough to look at improving the cooling.
I bought a Sapphire Nitro + Special Edition 8GB and it’s base frequencies are 1430 core 2100 memory. I’d say that’s pretty damn good for a base clock. I don’t know about it being the silicon lottery but it’s pretty quick for base nonetheless. I tried to put 70 more Mhz on the core and 150 on the memory and it crashed a couple of times before I got it back onto base clock and it stabilized again. Luckily I have a separate dedicated GPU in my computer so the whole thing didn’t go ballistic. But yeah I think mine is pretty dang close to as fast as it’s ever gonna go. And it’s base clocked haha
Have you used the voltage bar? Have you tried just overclocking the core withouth the memory? Not every memory can handle 2250MHz. But maybe you gpu can handle 1500MHz. Dont be scared about black screens. Just restart. If the temps are low, chances are pretty low to destroy something
I have reached that overclocking frequency setting in letter those parameters and everything is fluid with temp of the GPU under stress less than 75 ° my Gpu is a: SAPPHIRE NITRO + RX580 8 GB SPECIAL EDITION overclock: 1500MHz Core and 2250MHz Memory
I have the same sapphire rx580 nitro plus special edition. But when i try to oc with 1500mhz and 2250. And then compare cinebench test it shows less score then factory settings.
Hit 1520 and 2200mhz on the memory with a single 8-pin I wouldn't worry too much about power, the silicon is what matters. Max the power limit then bump the clock.
Honestly, I just did a light overclock of 100mhz to memory, its more than enough for me, and irons out any hiccups that I had in games like fallout 4 at 1440p. memory bandwidth is now 268 Gbps
I have the same card, but never OC. I don`t play fastPS and don`t need the frames. Impressive how cool the card runs even with this settings. In germany you have to wait 4 weeks to get a Sapphire Nitro+ for 280€=310$ !!!! Nice vid btw....i will try to OC later my card...just to see my results
you guys should be more grateful ... you don't appreciate things enough ...because for that card i need to work 2 months without eating food ,paying bills and rest...only breathing.That's basically impossible ,our salaries in serbia is from 180-250 euros maximum.I dont know anyone who have 250 but between ,yes.I don't wanna be modern slave anymore,i hope i will get out from this country forever!!!!
Ok-I didn`t run a stress-test and i couldn`t arrive stable 1500Mhz. Specs: CPU : Ryzen 1600 not overclocked RAM: GSkill Aegis 2x8GB 2933MHz Motherboard: Asus Prime B350 Plus GPU: Sapphire Nitro+ 580 OC to 1480Mhz Memory 2240 +14mV Heaven BM: Settings as same as in the vid. FPS: Stock: 65 FPS OC: 71 FPS Temps: max 71 degrees celsius
I have an ASUS rog strix oc 8Gb and I did achieved 1470Mhz core and 2150Mhz, I´ve tried before the benchmark and played Crysis 3 next at max settings at 1080p for hours and everything was awesome!
Managed to get my ROG Strix Top edition model to run at 1540MHz and 2250 on the memory. I've clearly got pretty lucky with my silicone, thats also at only 1.18 volts. Stress tested for an hour, had no hiccups at all.
Has the same card as you so i tried my chances and set it to your overclock and...........Bingo ! It works. Tempetures are pushing 80 celsius often though.
Asus Strix ROG RX580 8GB OC (8pin) - 1515mhz/9gbps is what I found to be the most stable - 1535mhz/2250mhz was kinda stable and I got 1555 to run Unigine Valley extreme once before it crashed and I freaked out xD I think I'm lucky af
I wonder how many memory errors the GPU has to fix at 2250Mhz... you should use HWiNFO64 and let it run in the background while gaming, and look at the GPU memory errors results after you finished gaming. It's needless to say that the value should be 0, because every error will use some of the GPU's power to correct it which will cause slight frame drops/stutters and worst case scenario system crash if it's producing too many errors and the GPU can't keep up with fixing.
Great guide! I got my xfx RX 580 4gb to 1450 mHz clock and 2000 mHz memory (stock is 1366 mHz clock and 1750 mHz memory). My Superposition score went from 8144 to 8738!
But I can use those OC settings for gaming... The superposition bench test will probably be the most that the graphics card will be stressed. It's also easier to do that than taking averages for each and every game that I play before/after and listing the settings.
Program why u always lying u lying so much nanana. Tell me names of those games where u can use ur oc settings, cauze i tried few AAA titles like hitman , watch dogs 2 and even some low spec games and all games ended crashing. Do u know that increasing memory can make ur card run even slower? i really want to believe that u got +250 on memory but i get maximum like +25 which is 10 times less so yeah :D
By the way, nice video! And let me tell you that running Heaven bench is simply not enough as I've ran it for an hour, played a few games, all good... but after 3 minutes playing Crysis 3, Directx and the Radeon drivers crashed. So if you want a proper test, play Crysis 3 for 30-60min, THEN you're good to go :)
Probably has good airflow in his case. Mine get's so hot stock because i dont have any good airflow at all. Hopefully when i get a new case that'll help
seems like I got the good card, running 1524 main core clock and 2250 memory, no problems yet. I got to 1489 without the voltage and anything above that gave weird glitches in textures, its running 65 degrees MAX. im going to see if I can push this even higher. btw what does the voltage do? I am very new to overclocking update, it seems like 1540 is stable above that it crashed, that's quite the overclock 200 MHz, not bad for someone who has never overclocked (to the max, I have overclocked before but the max what the card could handle)
I ordered this card yesterday. It will be my 1st graphic card. Looking forward to see how it will run on my system. And how it feels to work and play with a graphic card in the system. My processor is AMD 960T and I unlocked it to 5. cores. Motherboard : M5A88-M which have 4250 HD graphics 1024MB shared memory. I was trying to play Battlefield 3 on my system. But it was running so slow. Was running at 8-12 fps. So I thought to buy a graphic card. Hope this graphic card will be sufficient enough to play for next 10 years at least.
Depends on which resolution you will use yes it can even endure that much, this gpu its high range not enthusiast but will be fine for 2k gaming for some years. At full HD you can rock for years
@last2hack I bought FX-8350 now. And it is running at 4.2 on all cores but when I run cinebench R15 test then it throttles down due to high VRM Temps. As my motherboard M5A88-M doesn't have VRM heatsink. And to solve that problem you need to put fans on both sides of Motherboard where VRM is located. But now I ordered aftermarket heatsink to directly apply on VRM MOSFETs. Let's see how well they perform. Fingers crossed. 😊🤞 Else I'll have to buy another Motherboard with heatsink on VRM to take this CPU to 5Ghz
@last2hack Yes Bro. your motherboard have VRM Heatsink. You can definitely overclock FX-8350 on your motherboard upto 4.5 - 4.7Ghz with good Air Cooler.
1450MHz core 2250MHz memory +75mV seems to work for my Gigabyte RX580 Gaming 8GB card, just has one 8pin, but now it sounds like a geforce fx5800 ultra
Thank you! This was my 3rd OC video and found you to be the most helpful. Was able to achieve 1490mhz on i think 1.12mV on my Sapphire Nitro+ because its my very first time overclocking anything and wanted to play it safe lol. Question: Once overclocked, the gpu runs like this always? or just during gameplay?
Great video! ASUS ROG STRIX TOP OC 1490MHz/8648MHz (1431MHz/8000MHz stock) 69C @ 1.162V (1.150V stock) I'd like to push for 1500+/9000 but I really don't like temps above 70 on my GPU. Rather keep the voltage lower at the sake of lower speeds.
I have the same card as you and with the settings from this video I reach a max temp of 63C after switching the stock thermal paste to Thermal Grizzly Kryonaut.
rx 580 8gb saphire nitro+ special edition voltage 1243mv gpu clock 1575mhz memory clock 2250 mhz on avreage 60 - 65 degreeas celsius on air gta 5 bf1 R6 1440p ultra 60 fps stable allways i have paid 125 euros for this gpu as a used one so for me for this price its still a bargain and yes its stable all day long with this settings cant go anywere further ive tried 1580 will just crush
I have achieved a stable overclock of 1535Mhz Clock and 2250Mhz Memory, fans are on 100% and my score is 3132 on Heaven running everything on max settings
@@Charl3sX I'm trying to overclock my Nitro+ Card from the core clock of 1411 mHz, but if i raise it by even one mHz without touching the voltage the system crashes. Is the increased voltage bad for your gpu if its still running quite cool?
Using msi rx 580 8gb and got these overclock settings without “crashing”: 70 mv, powerlimit 50, core clock 1500 and memory 2250. Have only used this in valley benchmark. I will try to benchmark these settings while i sleep tonight, havent tried gaming either yet
Hmm i did 1500 with 8pin on amd wattman full auto just clock target plus 30% works fine. Out of the box i can undervoltby 0.120 with stable results its awesome
Probably, but i personally prefer undervolting my cards to get better temps. The overclock is a lower priority to me. It barely changes fps. Besides, running a 1500mhz speed is so far out of the cards performance sweet spot, hence the massive voltage boost needed. Its just silly to clock this card that high. My recommended settings are 1350-1425mhz and undervolt as much as possible. There are videos on how to undervolt with afterburner. basically just press ctrl + F and adjust the Mv on the graph based on clock speed. See how low you can get the voltage at max boost clock while remaining stable. Then lower the other clocks voltages accordingly.
if you also turn on Extend Official Overclocking Limts its located under settings in msi afterburner at the bottom. however it will let you overclock your memory more. i have the rx 580 strix 3 fan version i was able to get mine from 2250mhz to 2600mhz which is 10.4gb per second which is very good. however it may not be stable for everyone however it is a good little tip that might allow you to get a little more performance out of your card.
RX 570 4GB red dragon only 1+8pin modded bios,power limit on 225w (stock is 180w) 1400MHz core 2050MHz memory (btw this is a ex mining card with only 1 output)
you still using 17.5.2 graphics driver today? What do you recommend today? I have the MSI RX 580 gaming x 8GB. I did all this and I'd get black see through artifacting at the dragon statue (no where else) in heaven so I was wondering if I switched drivers they might disappear? Some people just say its a graphical glitch in Heaven itself and not actually your GPU but I dont know
Silicon lottery not all cards overcook as well. here are guru 3d overcooking settings although they recommend 1450mhz for long term use www.guru3d.com/articles_pages/msi_radeon_rx_580_gaming_x_review,37.html
cuz u need to up core voltager to +93, power limit to +50 then core clock 1500 memeory clock to 2250 and fan to 65% and up www.guru3d.com/articles-pages/msi-radeon-rx-580-gaming-x-review,37.html
the worst part of the feller is: say if you pull out a prime state you can extend the card much further. But if you not like what happend you can’t oc more mhz cuz the feller can’t handel it
I answer for you. Yes, it will, just spend some time on a nice custom fan range and it will be a great experience for gaming in both sound and cooling. 100% fan speed is useless unless you have two rx 580 and the room of the air in the case will decrease
@@ciccioorofino9600 I am currently only 1 as i am waiting for the new amd card to come out (RX 6000 SERIES) but i have taken your advice and running more fans in the case
i have the same card, now if i want to OC to 1450 or 1475 can i have some fps change ? and will it stable with your settings in afterbuner ? tks i;ve never overclock my gpu
Great video. But reaching 9ghz of memory speed has nothing to do with the memory size, mate. It's more with the memory manufacturer, hynix, samsung... that's what you should be pointing out. Would u mind to check yours with gpu-z? The whole overclock was amazing for sure. Grats...
Igor Rafael I am 100% aware that speed has nothing to do with memory size. The 4gb only runs at 7gbs the 8gb runs at 8gbs. As I know that my rx 480 4gb didn't overclock much on memory. I'm pretty sure your not going to get a 2gb memory overclock out a 580 4GB. And yes this has all been confirmed on gpuz. I normally do include it for Nvidia cards to show the changes to the boost clock etc
I was referencing that the 8gb has more potential to hit 9gbs than the 4gb model which it does. As for the memory it hynix but plenty of people have hit 2250 on samsung
I have the same rx 580 4gb with Samsung memory my core clock is 1575mhz and my memory clock is 2100 MHz and I’m still goin Gand tweaking running benchmarks still no particles or crashes yet
Yep I have Rx 580 sapphire nitro+ spec edition 8gb and I put everything like this guy on 1500mhz and 2250 memory and after 40-50 min it crash I cannot really go beyond 1450mhz and 2100-2150mhz memory it always crash
That's actually wrong, benchmarks are made just to test out your gpu or cpu. You can see the gpu is maxed out here so it's being push to its limit. The only difference is that games use both cpu and gpu. If you crashed while playing a game but not during benchmarks, your psu might not be enough. For the best stability test, benchmark both cpu and gpu at the same time. Just take note of the temperature
@@mihajlojankovic4343 You cant just follow blindly lol. Every card is different. This guy just won the lottery ticket or just that most rx 580 can be oc to 1500mhz but that doesnt mean all can do it. It depends on your silicon lottery
MSI Radeon RX 580 8GB OC GPU is fairly similar to your Sapphire Nitro+ 8GB GPU. Will this work with your settings. I am running Heaven atm but I was just curious if it could hold.
The only way to know if things are stable is to test things out and if it crashes back off 10 to 20 and retest. Every card is different so test and keep an eye on temps and have fun with it. Use these videos as a good reference and resources
well thx to my Asus Croshair V Formula-z motherboard wich contains a extra molex power connection for GPUs I was able to maintain 1430mhz on my cheaper rx580 stable and 2250mhz on the memory
What are the fps gains? i own a Aorus RX580 8gb and the oc is 1380mhz but im still on gaming that is 1365mhz i haven't felt the need to overclock it yet but would love to know how many fps you gained.
Absolutely not lol, technically you aren't that soild just running those components at 450W, if you're gonna over clock or play games for long period I suggest getting a 500 watt psu at least
yeha try get 500 w or higher with the 580 it states that for stable use you need 500w or higher so overclocking will require more power, causing ur psu to get diseased and ur pc will be unstable, super hot and crash
It is just fine. rx580 is about 185W on max, cpu about 100W on max, count MBO, ram, drives, fans, optical if you have etc at about 30-40W... just under 320 total when gaming on the max. It is a rare case but, for the sake of agument. It is just about the sweet spot of 80% of your power supply. So, no big upgrades on the system, without changing the power supply. And nothing will blow up ;)... I, myself have RX580 nitro+, r5 2400g (2600 is option :), 16GB hyperX predator 3000 ddr4 (8GB would be fine), asrock b450m pro4, two drives, two optical, three fans.... it is powered with corsair vx450w green line silent from 2007. 12year old psu from my old pc. Just to test stability and performance... everything is fine. Do I recomend it, not realy, just because it is old. If you get a new one with at least bronze certificate. 450-500W would be more than enough for that system. Stay well.
Guy's Don't just dump all that extra Voltage into your GPU this guy has been Overclocking the same card for months, Don't just Max out Voltage unless you want a brick. 25% Increments
Unless you've done a bios mod or set unlock extended voltage limits both amd and Nvidia cards are locked down to stay well within safe voltages the card can handle. Afterburner can't give it more than they can handle as the cards won't allow it.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Recommendation: Don't have afterburner overclocks boot with windows until you know you have a stable overclock. Don't want to run into a situation where you have an unstable overclock that keeps crashing your computer every time you boot windows before you can correct it.
Stock at 1340mhz and 1750 memory speed
Now at 1460mhz and 2001.
gives me 22+ fps on pubg. Thanks ♥️
is it +22fps or you only getting 22 fps?
@@damiivlr +22
@majed still using it right now.
please share your settings, I wanna try
@@MrMarxman max them all like on the vid. Then tight them when u are stable. For my card. Thats the best settings. No over heating and crashing
RX580 4GB 8pin Power Only
Solid OC at: 1450MHz Core and 1800MHz Memory. Ran for hours on Furmark.
Did you touch the voltage?
Singoli e Album in ANTEPRIMA I got my RX 580 8g single 8pin power connector to 1450 core and 2250 memory on stock voltage. The only slider you have to increase is the power limit % slide that all the way up. You shouldn't have to touch the voltage. And in heaven I ran 1080p resolution
Jarad C without touching voltage and power limit i only it 1420 on core clock e 2250 on memory clock, i have an aorus with only 8 pin connector, btw i want to try your settings
Singoli e Album in ANTEPRIMA slide power limit up and go 1450 on core and you should be good. I believe he only got his to 1500 is because he's under 720p and in heaven running windowed mode. I wouldn't try it
My one is 8+6 pin. What should be my parameter for 4gb Rx580???
Cheers. Followed the tutorial for my RX 580 using Afterburner as described. I ran the GPU clock up to 1400MHz and the Memory to 2300MHz with Voltage at +50 it runs very stable showing a voltage of 1181mV and after 30 minutes of running Unigine Valley the temperature is a steady 76c. The card I have is a single 8 pin connector and all looks good.
Now off to do some gaming.
the song in the background avoided me from looking at the whole video. Thanks
i literally thought my cat was meowing and something was really wrong..
stop being a little bitch
@@amanda.collaud there is no true story, all the stories are skewed, all religions have lots of morals and beliefs in common and that's what truly matters. I believe that's what religion truly is and that God and Jesus and the bible was made up to get more people interested.
got a chinese rx 580 8gb (maxsun rx 580 overseas edition m.2 8 gb bios) and bought thermal pads for the memory and oc'd to 1475 2250 mem oc and stays cool under 60c with fans at 80%. literally the best 100$ i spent ever in my life.
I have the MSI RX 580 8 gb Armored OC, and got mine running at 1500 Mhz and 2250 Mhz on mem and run powerlimit 50% and +43 Mv, I used to run lower voltage and it seemed to run I added a little. It even seem to run with no voltage but wanted to ensure 100% stability. I have been running this now for probably over a month with out issues.
Temps have been really nice, 60 - 65C in most games because I run at 60 fps only my games so in many cases the card is not working that hard. If I push it as hard as I can I think I hit 67 C or 70 maybe, cant recall now but the temps has been good.
Easy Peasy. Worked first time with no testing or reconfiguring required.. But we had the same card so thanks for doing the job for me!
Awesome video, so far I'm on 1465mhz GPU clock and 2250mhz memory clock, thank God for MSI twin frozr
*EDIT*:
Those settings worked just fine in Unigene Heaven, but absolutely stroked out in a game. Looking more at 1450mhz GPU and 2150mhz on the memory. :(
Lol, mine is 1411 MHz stock
I just tried this and its working perfect in a game. Are you still using this card? This is like 3 years old l
@Hunk SAS ok after about 2 1/2 hours of playing COD it crashed on me. I lowered themem clock to 2165 and I will test tonight. I played for an hour and it was fine. Maybe you can try that
@Hunk SAS It kept crashing now. So i put it to 1430 @ 2100 and it ran perfect but now I need to keep testing to increase more
Thanks mate this really helped a lot. Ran my own card at 1500 Core and 2250 Memory with absolutely no issues. Whatever I was doing wrong before I consistently got crashes.
I just don't manage to get any further than 1455 on the gpu and 2230 on the Vram
@@opoxious1592 I have the same gpu on the vid with Samsung vram 1500mhz core+2250mhz memory max voltage at radeon settings which is 1.2v and max power limit
@@Gabo99 Some GPU's have more tolerance for a higher clockspeed, before they get unstable.
@@opoxious1592 Yes.
In my case it is weird because my OC is lower when using 860w seasonic platinum psu but when I used 550w seasonic gold psu, I get it stable at 1500core and 2250mem.
9Gbps = 9 Gigabits per second, not GigaBytes. 1 Byte = 8 bits Nice video though (=
yup exactly
technically it 1Gb and 1 bite
That´s right! The most people don´t know this. I hate it if I hear the wrong.
I know its old comment but gbps = giga byte per second
@@xxblizzardxx1846 Ummm, there's a difference between capital B and lowercase b. Capital B = bytes and lowercase b = bits. 8 bits = 1 byte.
I undervolted mine to 1060 mV with 1420 MHz and 2200 MHz memory, fans are a lot quieter with a measurable performance increase
I cant quite break 1400mhz with 1100, how did you do that ?
@@yudhobaskoro8033 It can come down to silicon lottery. Curious what utility are you using? Personally I'm using MSI afterburner
@@anthonytech its radeon software
@@yudhobaskoro8033 same, 1411mhz only works with 1110mv or higher
Even -5mv less, witcher 3 crashes after 5 min gameplay
@ hmm, i think i got a bad card or sth, i can only reach 1336 with 1080mv, all it can do with a highest clock of 1436mhz and 1185mv, and i dont even know its safe or not lol
I am in 2020 and I am happy with my RX 580 sapphire overclocked at 1480 mhz
bro can u share ur full settings
that would help me
@@nothing-vx7vi bro listen i have sapphire pulse 8gb i got 1490 clock and 2250 on memory make sure to make ur fans high speed like 75 or 60%
Nitro+ Special Edition 1500MHz Clock and 2250MHz memory (Micron). Auto Voltage +40% power. Stable in Witcher 3 (everything maxed out) at 65 degrees 70% fan speed. For people who want good silicon I recommend getting the Special Edition as they have binned GPU.
How high does the auto voltage go?
Great numbers! What interface are you applying Auto Voltage in? I'm using Radeon's Trixx app to set clocks and can manually change voltage but don't see an "auto". Thanks!
Hey Rajat Dixit. +40% would be VDDC Offset? 40mV?
It crashes before I reach that clock so i don't think so.
Pretty stable and okay w/ 1425mhz core/2075 mem clock speeds. Stable at 75c temps. Was able to achieve 1500mhz/2100mhz, but ran at 85c so I lowered back since the games I play aren't too gpu demanding.
Wow I'm on 1350 mhz and have 88 degree
background music looping in the background really killed it for me.
Yay thanks I can run X-Plane now.
Sams
my bro uses x_plane, i have the same gpu, he will be happy :)
Good video. Could only get 1490 on core and 2180 on memory on my strix but it is 1410 on the core out of the box so not complaining. 😀
AMD HIS RX580 ROARING TURBO 8GB GDDR5 XTR
Cooled by ID-Cooling Frostflow 120VGA
Core Voltage: +100mv
Power Limit: +50%
Core Clock: 1520MHz
Memory clock: 2250MHz
Max Temperature: 73°c
Ez stable overclock :D
U are so lucky
Sapphire Nitro + Special Editon rx 580 8gb, 8 + 6 pin for power, 1501mhz core clock and 2250 memory clock, voltage under 1.24v. Stable in the Shadow of the Tomb Rider.
I've the same one but push the memory to 2300. Some games are stable like overwatch but some just begin crashing unless I turn down to 2200 like witcher 2
Imam istu kartu na koliko si stavio voltažu?
@@mihajlojankovic4343 dok ti se na ugasi dobro je :)
Moja krene da brljavi na 1500mhz i 2250 memoriju ne mogu više od 1450mhz da idem a istu kartu imam
@@mihajlojankovic4343 Pogledaj temperaturu, i pojacaj fanove... Gledam klince, naprave oc a ventilatore stock, "rade nam buku".
Wow this was really easy thanks . Got 1500 clock and 2250 mem on a XFX rx580 8pin + 6pin version. And boom !! 14000 score fire strike.
I achieved 1550mhz and 8000mhz on my Nitro+
81c max temperature on air
Gonna leave it like this
I guess I got the silicon lottery
@C Rizzy ikr and 81°c is a bit to hot and will shorten its life spa
81°C is totally fine. But i bet hes over 1.2V
You should replace the thermal paste with something more efficient to keep the temperature down. Running at 80c and above is quite hot and here I thought 74c is quite enough to look at improving the cooling.
I got max 70°c on 1500 and 2000
I bought a Sapphire Nitro + Special Edition 8GB and it’s base frequencies are 1430 core 2100 memory. I’d say that’s pretty damn good for a base clock. I don’t know about it being the silicon lottery but it’s pretty quick for base nonetheless. I tried to put 70 more Mhz on the core and 150 on the memory and it crashed a couple of times before I got it back onto base clock and it stabilized again. Luckily I have a separate dedicated GPU in my computer so the whole thing didn’t go ballistic. But yeah I think mine is pretty dang close to as fast as it’s ever gonna go. And it’s base clocked haha
Have you used the voltage bar? Have you tried just overclocking the core withouth the memory? Not every memory can handle 2250MHz. But maybe you gpu can handle 1500MHz. Dont be scared about black screens. Just restart. If the temps are low, chances are pretty low to destroy something
I have reached that overclocking frequency setting in letter those parameters and everything is fluid with temp of the GPU under stress less than 75 ° my Gpu is a: SAPPHIRE NITRO + RX580 8 GB SPECIAL EDITION overclock: 1500MHz Core and 2250MHz Memory
i have same card with same oc =)
Anch'io ho questa scheda e senza toccare il voltaggio ho raggiunto i 1450 clock e 2250 Memory, grande scheda :D
I have the same sapphire rx580 nitro plus special edition. But when i try to oc with 1500mhz and 2250. And then compare cinebench test it shows less score then factory settings.
Hit 1520 and 2200mhz on the memory with a single 8-pin I wouldn't worry too much about power, the silicon is what matters. Max the power limit then bump the clock.
Honestly, I just did a light overclock of 100mhz to memory, its more than enough for me, and irons out any hiccups that I had in games like fallout 4 at 1440p. memory bandwidth is now 268 Gbps
I have the same card, but never OC. I don`t play fastPS and don`t need the frames.
Impressive how cool the card runs even with this settings.
In germany you have to wait 4 weeks to get a Sapphire Nitro+ for 280€=310$ !!!!
Nice vid btw....i will try to OC later my card...just to see my results
montetank tankkiller Thanks let me know how you get on :)
Yeah--i will---with and without OC and with specs.......
you guys should be more grateful ... you don't appreciate things enough ...because for that card i need to work 2 months without eating food ,paying bills and rest...only breathing.That's basically impossible ,our salaries in serbia is from 180-250 euros maximum.I dont know anyone who have 250 but between ,yes.I don't wanna be modern slave anymore,i hope i will get out from this country forever!!!!
Dude, I worked 6 long months before I got my RX 480 and all I did was win golf tournaments. I'm deeply greatful of my achievement
Ok-I didn`t run a stress-test and i couldn`t arrive stable 1500Mhz.
Specs:
CPU : Ryzen 1600 not overclocked
RAM: GSkill Aegis 2x8GB 2933MHz
Motherboard: Asus Prime B350 Plus
GPU: Sapphire Nitro+ 580 OC to 1480Mhz Memory 2240 +14mV
Heaven BM: Settings as same as in the vid.
FPS:
Stock: 65 FPS
OC: 71 FPS
Temps: max 71 degrees celsius
how much psu do you need for overclocking? i have 500w 80+ bronze
DAIUM.... HUGE jump.
Nitro+ Here. STOCK goes FPS 34.7 Score 875 on Ryzen 7 2700x. Bumping 1500Mhz, 2250Mhz and vcore +40 , FPS 48.6 Score 1225 on Heaven! nice!!!
All on ultra By the way!
Not too shabby
Super Video! Thanks man. Followed the guide and got some great results. Cheers.
I have an ASUS rog strix oc 8Gb and I did achieved 1470Mhz core and 2150Mhz, I´ve tried before the benchmark and played Crysis 3 next at max settings at 1080p for hours and everything was awesome!
What did you set your core voltage to ????
works well, I have the XFX RX580 8GB XXX edition, 1500 MHz was unstable for me and the fix was running at 1480 MHz
I got 1480mhz on my 580 nitro + with stable temperatur around 73 celsius
Managed to get my ROG Strix Top edition model to run at 1540MHz and 2250 on the memory. I've clearly got pretty lucky with my silicone, thats also at only 1.18 volts. Stress tested for an hour, had no hiccups at all.
Has the same card as you so i tried my chances and set it to your overclock and...........Bingo ! It works. Tempetures are pushing 80 celsius often though.
Marphey phewww i would lower the clock and voltage
Asus Strix ROG RX580 8GB OC (8pin) - 1515mhz/9gbps is what I found to be the most stable - 1535mhz/2250mhz was kinda stable and I got 1555 to run Unigine Valley extreme once before it crashed and I freaked out xD I think I'm lucky af
I wonder how many memory errors the GPU has to fix at 2250Mhz... you should use HWiNFO64 and let it run in the background while gaming, and look at the GPU memory errors results after you finished gaming. It's needless to say that the value should be 0, because every error will use some of the GPU's power to correct it which will cause slight frame drops/stutters and worst case scenario system crash if it's producing too many errors and the GPU can't keep up with fixing.
1450 core, 2250 memory on my Rx 580 8g XfX and i didnt touch the voltage, i'm super happy
if you dont mind me asking, hows your card been after this much time on the overclock???
Great guide! I got my xfx RX 580 4gb to 1450 mHz clock and 2000 mHz memory (stock is 1366 mHz clock and 1750 mHz memory). My Superposition score went from 8144 to 8738!
Program so whats the point if u still cant use those oc settings in gaming , i can get around +25 memory before crashing lol
But I can use those OC settings for gaming... The superposition bench test will probably be the most that the graphics card will be stressed. It's also easier to do that than taking averages for each and every game that I play before/after and listing the settings.
Program why u always lying u lying so much nanana. Tell me names of those games where u can use ur oc settings, cauze i tried few AAA titles like hitman , watch dogs 2 and even some low spec games and all games ended crashing. Do u know that increasing memory can make ur card run even slower? i really want to believe that u got +250 on memory but i get maximum like +25 which is 10 times less so yeah :D
R6S, CSGO, SMITE, Overwatch, PUBG. Have you increased your voltage and have you heard of the silicon lottery?
Here's your proof mate. th-cam.com/video/JeX_-hmRkks/w-d-xo.html (Please ignore my poor skills)
By the way, nice video! And let me tell you that running Heaven bench is simply not enough as I've ran it for an hour, played a few games, all good... but after 3 minutes playing Crysis 3, Directx and the Radeon drivers crashed. So if you want a proper test, play Crysis 3 for 30-60min, THEN you're good to go :)
I know it's a couple years later but how the h*** did you over clock it that much and keep your heat down so low?
Probably has good airflow in his case. Mine get's so hot stock because i dont have any good airflow at all. Hopefully when i get a new case that'll help
I have 11 fans and this exact same card and with 50% fan speed with this overclock it still hasn't seen 50°
seems like I got the good card, running 1524 main core clock and 2250 memory, no problems yet. I got to 1489 without the voltage and anything above that gave weird glitches in textures, its running 65 degrees MAX. im going to see if I can push this even higher. btw what does the voltage do? I am very new to overclocking
update, it seems like 1540 is stable above that it crashed, that's quite the overclock 200 MHz, not bad for someone who has never overclocked (to the max, I have overclocked before but the max what the card could handle)
God shut up
I ordered this card yesterday. It will be my 1st graphic card. Looking forward to see how it will run on my system. And how it feels to work and play with a graphic card in the system.
My processor is AMD 960T and I unlocked it to 5. cores.
Motherboard : M5A88-M which have 4250 HD graphics 1024MB shared memory.
I was trying to play Battlefield 3 on my system. But it was running so slow. Was running at 8-12 fps.
So I thought to buy a graphic card.
Hope this graphic card will be sufficient enough to play for next 10 years at least.
Nice video though. I'll also try these settings.
Depends on which resolution you will use yes it can even endure that much, this gpu its high range not enthusiast but will be fine for 2k gaming for some years. At full HD you can rock for years
@last2hack I bought FX-8350 now. And it is running at 4.2 on all cores but when I run cinebench R15 test then it throttles down due to high VRM Temps. As my motherboard M5A88-M doesn't have VRM heatsink. And to solve that problem you need to put fans on both sides of Motherboard where VRM is located.
But now I ordered aftermarket heatsink to directly apply on VRM MOSFETs. Let's see how well they perform. Fingers crossed. 😊🤞
Else I'll have to buy another Motherboard with heatsink on VRM to take this CPU to 5Ghz
@last2hack Yes Bro. your motherboard have VRM Heatsink. You can definitely overclock FX-8350 on your motherboard upto 4.5 - 4.7Ghz with good Air Cooler.
@last2hack VRM Heatsink are generally located {between (Or Left side of (Processor Socket)) & I\o points}.
1450MHz core 2250MHz memory +75mV seems to work for my Gigabyte RX580 Gaming 8GB card, just has one 8pin, but now it sounds like a geforce fx5800 ultra
Mine runs 1480 but the fans are really bad, but you can change it in afterburner too my card keeps around 60 C with new fan settings.
Thx I just did it to my card XD
@@lewispandit fan speed?
Tutorial? Slide the bars to the right. Done
My gpu is completely fucked now idk what I did wrong
@@NunjiX Thermals or too much voltage (?)
I got 1460mhz and 2250mhz with mine nitro+ special edition on *stock voltage* and +50 power limit
RX 580 8pin Asus Rog strix
Solid oc at 1450mhz and 2050mhz memory :(
Captain Ryiss can you go any higher
I managed 1475mhz and 2250mhz and i got the cheapest 8gb one I could find.
my strix goes up to 1490mhz and 2190mhz memory and 1200mV max temperatures around 65-70 fans 53%
my rx 570 now works like your rx 580 oc i think i got a golden card
Thank you! This was my 3rd OC video and found you to be the most helpful. Was able to achieve 1490mhz on i think 1.12mV on my Sapphire Nitro+ because its my very first time overclocking anything and wanted to play it safe lol.
Question: Once overclocked, the gpu runs like this always? or just during gameplay?
John Clingmon just during gameplay, most cards have power saving features which heavily downclock the card when used lightly
if you only adjusted the to phase the card will downclick, my xfx rx580 stays at around 6 watts idle.
Aye goin two shaw you haw to ayeveclock
I love this accent xD
Can you post the best setting for rx580 without overclocking? Currently using Sapphire RX580 8GB / radeon version 17.7.2. Much appreciated thanks.
"Much appreciated thanks" lmao talk about ignorant
Holo Scope what..
Give thanks. I can overclock my 1450/2200 4GB graphics card without raising the core voltage
Gigabyte Aorus RX 580 4gb - 1 8pin
That's the limit. Capped around 140 Watts. With more voltage it goes up to 200 watts. I see 1520. That's about the limit.
@@AhmetOmerOzgen :(
Great video!
ASUS ROG STRIX TOP OC
1490MHz/8648MHz (1431MHz/8000MHz stock)
69C @ 1.162V (1.150V stock)
I'd like to push for 1500+/9000 but I really don't like temps above 70 on my GPU. Rather keep the voltage lower at the sake of lower speeds.
I have the same card as you and with the settings from this video I reach a max temp of 63C after switching the stock thermal paste to Thermal Grizzly Kryonaut.
rx 580 8gb saphire nitro+ special edition
voltage 1243mv
gpu clock 1575mhz
memory clock 2250 mhz
on avreage 60 - 65 degreeas celsius on air
gta 5 bf1 R6 1440p ultra 60 fps stable allways
i have paid 125 euros for this gpu as a used one so for me for this price its still a bargain
and yes its stable all day long with this settings cant go anywere further ive tried 1580 will just crush
How man I have same card I can't go beyond 1470 gpu clock
i get a peak of 1227mv. Is this a problem?
Do you overclock amd radeon gpus with msi afterburner in 2019? I've seen some people use the "Radeon Software Adrenalin 2019" software?
use msi much better
I tried the Radeon software one, it has automatic oc mode, but the manual isn't as good as on msi afterburner.
got my rx 580 8gb to 1450 speed and 2250 memory
2250 memory crashed
and i have the same one as you
I'm at 2100 with Aorus, also 1450
I have achieved a stable overclock of 1535Mhz Clock and 2250Mhz Memory, fans are on 100% and my score is 3132 on Heaven running everything on max settings
I have the exact same card and did the OC, but I never touched the core voltage. Do you suggest I leave it untouched or tweak with it a little bit?
i love you....cyberpunk before 40-50 fps cyberpunk after 60-144
what? I did the same he did in this video and im not getting those fps
Asus RX580 OC 8-Pin to 1500Mhz and 1200mV. Went from 9581points in 3Dmark Firestrike to 13188 points.
Damn.
EDIT: Experienced some artifacts after a while though, lowered to 1450 @9000. Works better. 12714 in 3dmark basic - Fire Strike
@@Charl3sX I'm trying to overclock my Nitro+ Card from the core clock of 1411 mHz, but if i raise it by even one mHz without touching the voltage the system crashes.
Is the increased voltage bad for your gpu if its still running quite cool?
Thats low, i got 16500 score @1470mhz core
@@khaderkharbutli8629 Probably because of a much better physics score.
1411mhz and 2000Mhz fan speed works well for me
Using msi rx 580 8gb and got these overclock settings without “crashing”: 70 mv, powerlimit 50, core clock 1500 and memory 2250. Have only used this in valley benchmark. I will try to benchmark these settings while i sleep tonight, havent tried gaming either yet
I could actually only get 1475 on core clock while gaming, no crash issues so far
Hmm i did 1500 with 8pin on amd wattman full auto just clock target plus 30% works fine. Out of the box i can undervoltby 0.120 with stable results its awesome
I have the world record on 3d mark for I5-8600k and rx580 Asus rog
Thank you, very cool!
new record at 1520mhz!!!! 1200 voltage
Blend let see it buud
@Andrey. Blend www.3dmark.com/fs/17050077
Blend still waiting baauuuddddd firestrike
is this voltage safe to run all day?
I would also like to know
Probably, but i personally prefer undervolting my cards to get better temps. The overclock is a lower priority to me. It barely changes fps. Besides, running a 1500mhz speed is so far out of the cards performance sweet spot, hence the massive voltage boost needed. Its just silly to clock this card that high. My recommended settings are 1350-1425mhz and undervolt as much as possible. There are videos on how to undervolt with afterburner. basically just press ctrl + F and adjust the Mv on the graph based on clock speed. See how low you can get the voltage at max boost clock while remaining stable. Then lower the other clocks voltages accordingly.
if you also turn on Extend Official Overclocking Limts its located under settings in msi afterburner at the bottom. however it will let you overclock your memory more. i have the rx 580 strix 3 fan version i was able to get mine from 2250mhz to 2600mhz which is 10.4gb per second which is very good. however it may not be stable for everyone however it is a good little tip that might allow you to get a little more performance out of your card.
why does no one knows this lol iam gonna try thanks
Don't trust anyone who's showing 16 CPU threads on screen in a GPU Vid. ;) It's 99% a noob
hello is there a risk when increases the voltage in amd gpu ? nvidia gpu has an automatic limite i think ? but that's not the case of Amd rx ?
I use to over lock it to 1500 when if rust got my card but now it doesn’t work with 1500 anymore (MSI Rx580 Armor MK2)
RX 570 4GB red dragon only 1+8pin
modded bios,power limit on 225w (stock is 180w) 1400MHz core 2050MHz memory (btw this is a ex mining card with only 1 output)
You dont need modded bios to get those speeds lol
@@patrickh92able well kinda,the 180w power limit is throttling the card,ended up buying a 580 8GB nitro+ SE and now ichill x4 1070🤣
you still using 17.5.2 graphics driver today? What do you recommend today? I have the MSI RX 580 gaming x 8GB. I did all this and I'd get black see through artifacting at the dragon statue (no where else) in heaven so I was wondering if I switched drivers they might disappear? Some people just say its a graphical glitch in Heaven itself and not actually your GPU but I dont know
i got same gpu as you and i am fine though idk if i can do more but so far stable. Use driver 11.4
Go play a heavy engine on those settings and goodluck having errora
XFX RX580 8Gb Black Edition....8 pin.
1510mhz gpu clock 2175mhz benched 3dmark.
i5 7600k @5.13ghz
Unstable stress-test.
Stable bench.
All limits increased.
Couldn't push any further.....currently
Got mine MSI RX 580 8G to 1460/2250mhz and got 17127 points in firestrike with it
Can anyone tell me why with my rx 580 gaming x plus I can't even get 1441 MHz? When I play at 1431 everythings good, but with 1441 I get artifacts
Silicon lottery not all cards overcook as well. here are guru 3d overcooking settings although they recommend 1450mhz for long term use www.guru3d.com/articles_pages/msi_radeon_rx_580_gaming_x_review,37.html
cuz u need to up core voltager to +93, power limit to +50 then core clock 1500 memeory clock to 2250 and fan to 65% and up
www.guru3d.com/articles-pages/msi-radeon-rx-580-gaming-x-review,37.html
the worst part of the feller is: say if you pull out a prime state you can extend the card much further. But if you not like what happend you can’t oc more mhz cuz the feller can’t handel it
Hey, thank you for this tutorial! just wanted to ask if you put your fan on 100% will it decrease lifespan ?
I answer for you. Yes, it will, just spend some time on a nice custom fan range and it will be a great experience for gaming in both sound and cooling. 100% fan speed is useless unless you have two rx 580 and the room of the air in the case will decrease
@@ciccioorofino9600 I am currently only 1 as i am waiting for the new amd card to come out (RX 6000 SERIES) but i have taken your advice and running more fans in the case
Can I ask what about the power consumption? I guess it spiked a lot so? I don't think it was said in the video but if I am mistaking than sorry.
Bruh my core voltage is not saving rx 580 , please help me
So, in short words. How is the maximum speed in overall terms?
rx580 8g 8pin, power max, no voltage, 2225mhz, and 1470 crashed on apex
Boost voltage go down to 1460 and 2000
i have the same card, now if i want to OC to 1450 or 1475 can i have some fps change ? and will it stable with your settings in afterbuner ? tks i;ve never overclock my gpu
If you want fps gain then overclock your memory first this is where your biggest fps gain will be, then clock your core for a few additional frames.
If you see artifacting or tearing when you have either increased your GPU or memory frequency, have you done permanent damage to either of them?
No that means you just need to lower your overclock a bit.
How quickly will that kill your graphics card if you overclock it to 1500+ and do max voltage?
Great video. But reaching 9ghz of memory speed has nothing to do with the memory size, mate. It's more with the memory manufacturer, hynix, samsung... that's what you should be pointing out. Would u mind to check yours with gpu-z? The whole overclock was amazing for sure. Grats...
Igor Rafael I am 100% aware that speed has nothing to do with memory size. The 4gb only runs at 7gbs the 8gb runs at 8gbs.
As I know that my rx 480 4gb didn't overclock much on memory. I'm pretty sure your not going to get a 2gb memory overclock out a 580 4GB. And yes this has all been confirmed on gpuz. I normally do include it for Nvidia cards to show the changes to the boost clock etc
TheFullSetup I guess you didnt get exactly what i've said. But , nevermind, wont discuss about it with u anymore... thanks for your poor attention
I was referencing that the 8gb has more potential to hit 9gbs than the 4gb model which it does.
As for the memory it hynix but plenty of people have hit 2250 on samsung
there is always someone ,thanks for the tips i was stuck with 16% gpu utilization(while it was 100% actually ) but that checkbox in options fixed it
I have the same rx 580 4gb with Samsung memory my core clock is 1575mhz and my memory clock is 2100 MHz and I’m still goin Gand tweaking running benchmarks still no particles or crashes yet
I'm pretty sure this will crash when actually playing a game for an hour or 2. Benchmarks aren't really that heavy.
Yep I have Rx 580 sapphire nitro+ spec edition 8gb and I put everything like this guy on 1500mhz and 2250 memory and after 40-50 min it crash I cannot really go beyond 1450mhz and 2100-2150mhz memory it always crash
Furmark is heavy
That's actually wrong, benchmarks are made just to test out your gpu or cpu. You can see the gpu is maxed out here so it's being push to its limit. The only difference is that games use both cpu and gpu. If you crashed while playing a game but not during benchmarks, your psu might not be enough. For the best stability test, benchmark both cpu and gpu at the same time. Just take note of the temperature
@@mihajlojankovic4343 You cant just follow blindly lol. Every card is different. This guy just won the lottery ticket or just that most rx 580 can be oc to 1500mhz but that doesnt mean all can do it. It depends on your silicon lottery
Rx 580 XFX XXX GTS 8GB
Core clock:1500mhz
Memory:2200mhz
+12mv
+20 power limit
The 1386mhz edition? Can you set stable with this tutorial?
No its the 1366 mhz edition and i got stable clocks.
7:27 i had to rewind as I genuinely thought my cat was meowing weird at my window
Does overclocking help for recording with recording game videos or just gaming? Pls help
MSI Radeon RX 580 8GB OC GPU is fairly similar to your Sapphire Nitro+ 8GB GPU. Will this work with your settings. I am running Heaven atm but I was just curious if it could hold.
The only way to know if things are stable is to test things out and if it crashes back off 10 to 20 and retest. Every card is different so test and keep an eye on temps and have fun with it. Use these videos as a good reference and resources
rx580 msi armor 8pin
1490mhz core \ 2000 mhz mem \ on da gang
Are you sure I can only get up to 1470 on core clock
well thx to my Asus Croshair V Formula-z motherboard wich contains a extra molex power connection for GPUs I was able to maintain 1430mhz on my cheaper rx580 stable and 2250mhz on the memory
Is it really okay to just crank-up your core voltage and power limit like what he did in the video?
Do it by increments of 20. If you crash go back down and try by 10. If not try by 5s. And then 1s. If you keep crashing revert it to normal
What are the fps gains? i own a Aorus RX580 8gb and the oc is 1380mhz but im still on gaming that is 1365mhz i haven't felt the need to overclock it yet but would love to know how many fps you gained.
Exactly...
Could I overclock this gpu and a ryzen 3 2200g with a Corsair 450W ??
Absolutely not lol, technically you aren't that soild just running those components at 450W, if you're gonna over clock or play games for long period I suggest getting a 500 watt psu at least
yeha try get 500 w or higher with the 580 it states that for stable use you need 500w or higher so overclocking will require more power, causing ur psu to get diseased and ur pc will be unstable, super hot and crash
It is just fine. rx580 is about 185W on max, cpu about 100W on max, count MBO, ram, drives, fans, optical if you have etc at about 30-40W... just under 320 total when gaming on the max. It is a rare case but, for the sake of agument. It is just about the sweet spot of 80% of your power supply. So, no big upgrades on the system, without changing the power supply. And nothing will blow up ;)... I, myself have RX580 nitro+, r5 2400g (2600 is option :), 16GB hyperX predator 3000 ddr4 (8GB would be fine), asrock b450m pro4, two drives, two optical, three fans.... it is powered with corsair vx450w green line silent from 2007. 12year old psu from my old pc. Just to test stability and performance... everything is fine. Do I recomend it, not realy, just because it is old. If you get a new one with at least bronze certificate. 450-500W would be more than enough for that system. Stay well.
BurnerProducts RocketStoves Yea my 450W has a bronze certificate so hopefully I will be fine.
@@Justin-kd2uj do not give advice to others if you know shit.. holy crap, dude
6 years later, 1520/2250 dual oc 8gb (from aliexpress) stable and 70c gaming (with noctua fans throwing air)
mines clocked at default 1350, what do you reckon would be a safe clock for me to go up to
1400mhz
Emesaih aftabahnah 😂😂😂❤️❤️❤️
🤣🤣🤣🤣
Voltage 96 dont select 93 & 100 selected help please 93 crash pc 100 workern 1.287 voltage dangers ?
I have the same nitro+ sapphire rx 580+ graphic card however my power limit is 20 not 50 why so?
In the MSI settings you probably need to select 'Extend overclocking official limits' or whatever the option is called
Guy's Don't just dump all that extra Voltage into your GPU this guy has been Overclocking the same card for months, Don't just Max out Voltage unless you want a brick. 25% Increments
Unless you've done a bios mod or set unlock extended voltage limits both amd and Nvidia cards are locked down to stay well within safe voltages the card can handle. Afterburner can't give it more than they can handle as the cards won't allow it.