You probably aren't doing THIS with your Domino
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- Most of the content woodworkers see on TH-cam about the Festool Domino has to do with how fancy it is and whether the alternatives are just as good. Fewer videos and articles actually help new users of the Festool Domino understand how to make good use of it beyond the basic plunge we all know and love, whether you use your hands or not.
SUPPORT
Support this new channel by joining my Patreon: / sturdyboneswoodworking
TOOLS I USE (affiliate links)
Measuring Squares - lddy.no/1jcef
Double-Sided Tape - lddy.no/1jcee
F-Style Clamps - lddy.no/1jceg
Festool Domino DF500 - amzn.to/3Gxobkh
Carbide Scraper - amzn.to/3SX19L2
Master Canopy Tent 12x12 - amzn.to/47sVNeJ
Starbond Brown CA Glue - amzn.to/3ulVlAf
Makita Angle Grinder - amzn.to/3QSAe03
Kutzall Original Fine Shaping Disc - amzn.to/47stcX5
Kutzall Original Very Coarse Shaping Dish - amzn.to/47Qu5bP
1/8” downcut spiral router bit - amzn.to/49Ocnr6
3M Worktunes Bluetooth Hearing Protection - amzn.to/3MXdtab
RZ Mask - amzn.to/49T8HVc
Tuck Tape - amzn.to/47p8XJD
Liquid Glass Deep Pour 24-Hour Epoxy Kit - amzn.to/47rHiIe
Let’s Resin Metallic Powders - amzn.to/3QVVrWW
DeWalt Sander - amzn.to/47H9PZU
Bessey Pipe Clamps - amzn.to/47KgxhH
CA Glue Activator Spray - amzn.to/47IJavR
Titebond II - amzn.to/3GcsbWX
Glubot Glue Bottle - amzn.to/485acOn
Glue Applicator Kit - amzn.to/3Rch9Y9
Brown paper roll - amzn.to/3sMfsay
Fujispray Semi Pro 2 HVLP Sprayer - amzn.to/49Mldpb
Awl set - amzn.to/3GbH4sE
Narex Skew Chisels - amzn.to/3MTMOek
Bosch Colt Trim Router - amzn.to/3MULDLy
Bosch Colt Plunge Base - amzn.to/47iQq1H
Makita 3-1/4HP Plunge Router - amzn.to/3T0GPbH
Wood River Marking Knives - amzn.to/46wnnGJ
Suizan Ryoba Pull Saw - amzn.to/3MUMf3O
Husqvarna Backpack Blower - amzn.to/3sMgGT1
MUSIC (courtesy of Epidemic Sound - share.epidemicsound.com/hv4byf)
Strummer Boy - Dusty Decks
Midwest Diner - Frook
Jazz Bars - Dusty Decks
FOLLOW
▸ Subscribe - rb.gy/yfzxqf
▸ Instagram - / sturdyboneswoodworking
▸ Website - sturdyboneswoodworking.com
CHAPTERS
00:00 Intro
00:46 Tip 1 - Make Jigs
02:10 Tip 2 - Draw Arrows
05:25 Tip 3 - Workholding Jigs
05:19 Tip 4 - Hide the Tabs
07:54 Tip 5 - Vertical Drilling
08:54 Outro
#festool #domino #beginnerwoodworking - แนวปฏิบัติและการใช้ชีวิต
![รอจะบอกคำนั้น - KARN The Parkinson x DAOU PITTAYA [LIVE SESSION]](http://i.ytimg.com/vi/wACfLFATe2Y/mqdefault.jpg)
When marking I like to indicate which should be cut on the tight setting or medium setting. Also if I'm doing an offset domino I'll mark depths too. It's easy for me to forget to check all my settings before starting a cut, so visual reminders are a big help.
I 100% agree. What marks we use is far less important than just developing a workflow for making those decisions and checkpoints prior to drilling. Thanks for watching!
I never even knew what a jig was. This is BRILLIANT
Thanks for watching! Now you know!
Useful tips Cameron, thanks!
Thanks Mark! Hope it helps!
Hey. Really enjoying your work. You are so right about little jigs and fixtures. I “grew up” in a production shop, and I still have that mindset*. Subbed and looking forward to more.
* I started when I was 16. I’m 66 now.
Wow then you are way ahead of me. Glad this one could make an impact. Thanks so much for watching. I’m excited for what’s coming next.
Good advice, great domino hip thrusts
🤣 I learned from the best. @bourbonmoth
Great video mate! Now I need a domino 😂
Thanks Tom! Come on! Surely you can get the same result with a doweling jig or a router! 😜
@@sturdyboneswoodworking 😂 can’t do the hip thrust with those. At least that would look weird 🤣😂🤣
Haha. Yeah I’ll leave that one to the pros
I draw a little mortise outline where i need to drill the mortise to avoid blunders. Mainly for the middle of wide board with vertical plunges. Easy to go on wrong side of the line there.
I also mark reference sides on boards where the mortise is not 100% center as with your example of vertical plunges, i set my domino fence to 10mm for vertical pieces pretty much always irrespective of piece thickness.
Hope that makes some sense to someone!
Great tips, i also hid my little toggle clip things as i found they sometimes prevent domino from going flush with workpiece
Awesome! Yeah I actually make that mistake in my upcoming video! 🤣 good tips!
I just bought a domino joiner can't wait to use it, thanks for the tips
You’re welcome! Thanks for watching. I feel like there’s a lot more to help orient new domino users. Feel free to reach out with any questions. I’d be happy to help.
Just found your channel, great stuff so far. I would love to see an example of how you use those jigs in your tip #1.
Hey thank you! And fair point. I think somewhere along the line a b-roll shot got removed 😅 I now realize. The idea is to hang the edge of the little block on the workpiece and mark the lines from the ends of the jig. Let me know if that helps.
Not a bad video. Well informed and good quality. Try to go by memory or just get more takes. It may be a bit more of a hassle on editing, but it's less distracting than you looking off to one side to read. Keep it up.
Great advice. This was for sure an experiment. I think in the future I’m gonna try scripting a bit more and maybe a teleprompter. Thanks so much for watching and for the feedback.
Credit to him as I can’t even write this comment without a cheat sheet. Lighten up :)
It’s good content which is what matters.
those flip tabs drive me nuts, never realized you can lock them out of the way without removing them completely!
Yeah they drove me crazy especially with that specific example I noted. In fact I made this video because I had just figured that out and was like THE INTERNET MUST KNOW. lol. Thanks for watching.
@bourbonmoth would be proud
Hahaha! 🤣🤣🤣 Learned from the best!