Help with the water filling please for this machine. Do we fill all channels or just outside ones. and how does the outside water hole fill up when it only goes to a small square
I just use a straw and syringe to add water through the side. Thus far, I've seen on a blog that humidity problems do occur. The owner of the blog recommended to dry test a small batch for the 21 day period. For me:; My humidity fluctuates. I added roughly 4 syringes of water and the humidity rose from around 47 to 58 been around the 53-58 range for the past 8hours. Aiming for 55 humidity with temperature of 38.1 Celsius. I will get the syringe measurement and post back here. Note that my incubator is housed in a Styrofoam box to help with heat management. I'm actually experience a lot of heat drops. Usually from 38 to 37, maybe 36.
Hello Today I purchased this product,I had many doubts,how can I contact u for clearing my doubts, Product came without assembled,I don't know to assembling processing, And how much water add in it &how can add Egg rotation is not working.
This may help from the manual which is a little difficult to understand. I don't believe there is a high / low setting for humidy, just one setting. If I discover differently I will try to update this note. Display Description Factory Settings AL Setting low temperature alarm 1°C (33.8°F) AH Setting high temperature alarm 1°C (33.8°F) AS Setting humidity 60% CA Calibrating temperature transmitter 0°C (32°F) HS Setting upper temperature limit 39.5°C (103.1°F) LS Setting lower temperature limit 30°C (86°F)
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
hello first I did this machine I first gave a space with the paper of the machine by the uct and the humidity 55 I found 37.7 at this temperature I have set this exact solution machine normally 38.2 temperature with this negative second if the moisture content of a bolumude full of 65 I find what I do This is because the air wave from the top of this machine cannot be fully removed and there will be no problem. Heat from 50 to 55 humidity for chickens 37.7. At the end of the first 18 days of development will be heat 36.7 humidity 70.
I can’t find where or how to change the humidity levels and alarms. I do dry hatching and need to with this one!!! Can someone please help since ive just read we got dropped on a how to #3??
For me, the incubator came at 35 Celsius with Humidity of 50. But your settings would depend on the egg you are hatching. I'm from the Caribbean by the way. Temperatures might vary.
You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
I wish she would explain it better , I don't know how to get the eggs day set and how to get the humidity to were I want it , wish someone would help me please
Default is 1C , to change it: Hold the Settings button down for three seconds then you will want to go to the AH menu selection from there you will want to move the numbers up to your desired HIGH temp threshold. And repeat the process for your Low temp in the AL menu selection
@@TheLAShop You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the humidity figure is regulated, which means when the signal will go. But you can't regulate the humidity itself. Humidity can only be regulated by the amount of water that you add.
@@ericaelliott1516 I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
@@jessemarvinvelarde8331 I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
After working for 6 months, the Incubator temperature inside does not increase from 33.6/33.8 in the display. What is the reason? Is the fan a problem.
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
@@jessemarvinvelarde8331 You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
@@jessemarvinvelarde8331 I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
my incubator runs about 37. humidity is way up I live in north carolina how much water do I need to add to get correct humidity? help! I placed eggs in about 24 days ago and none have hatched..
Hi! The temp and humidity may be affected depending on the environment as well. Is the incubator set at an average room temp? anywhere between 68-74 degrees?
The LA Shop i have this kind machine im not sure if its work perfectly course the temperature is between 37.8 - 38.4. can i succesifully if i put the eggs? And the humidity is between 70 t0 72
The LA Shop The LA Shop i have this kind machine im not sure if its work perfectly course the temperature is between 37.8 - 38.4. can i succesifully if i put the eggs? And the humidity is between 70 t0 72
I am wanting to know how much water do I put in the bottom of the incubator do I just put in the middle section or do I do the whole perimeter need answers asap thanks
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works .. You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
@@sas_grimreaper4987 We sincerely apologize for the delay response. You may contact us directly via email if you have any other questions at sales@thelashop.com
I brought one of these and read the instructions but can't get the hs setting lower then 30.0, does anyone know if I can get it lower as need to get it at 29c but mine will not go lower then 30c.
Can you show how to set the humidity and the temperature for the chicken eggs and the days setting I got the incubators but had trouble set the humidity what is the setting temperature should be on . Thank you
You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
Hello! Unfortunately, we do not have a continuation to this video as of yet. However, if you do have nay questions, please feel free to ask and we will do our best to help you!
@@AtifAli-yx6bm would probably be better fully turning them your self as these only turn about 45 degrees... i made my own incubator before and got better hatch rates than using this... but i didnt turn them my self but that was quail eggs i used im going to try some silkies and other bantams soon in this one see how it goes turning them my self...
@@tiredhero tbh ive litterally just put 24 eggs in the incubator now and hope for a good hatch rate but usually get like 50% but the time i used eggs from my own hens i had a much higher hatch rate
@@AtifAli-yx6bm so i binned the incubator and made one with a inkbird a heat lamp and a styrofoam box.. hatched 5 out of 5 but lost one.. so ended up with 4 chicks... best hatch rate i have had..
My incubator is overheating.what's wrong? I setup the machine to 37.7c but continue to increase until reach 41.5 and not comes down.....please help me ...thanks
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
This is crap, I have one of it and I never had good results, from 48 good eggs you can get 15 chicks if you are lucky. I have to investigate, but I believe that the temperature on the sides is lower than in the middle
Well are you sure all the eggs were fertile? You dont get chicks from every egg unless you are 100% sure the rooster has mated with all the chickens before the egg was laid.... if any eggs hatch, that means the machine worked just fine. Just means the rest of the eggs werent fertile.
@@AIAllar only 5 eggs of 48 wasn't fertile, the rest had dead chicks inside. I think that the temperature in the center is OK but a bit colder on the sides. I have only 13 chicks but I'm happy. At this time I have another 48 eggs in it but this time I insulated the bottom and sides. I wish I can upload a video to show you
@@mandelman4518 it iss this is a crapp incubator i had best results with my janoel 12 bestt incubator for good results i had bought shipped eggs off ebay and 6 hatched out of 12 so 50%hatched i was pretty suprised for shipped eggs but thiss here noo the eggs on the side feel colder but the middle kinda warmm
I actually am now starting off on this. Was given this incubator to run some trail 'common' flow eggs. Fortunately, I placed my eggs in the center. Not sure what made me do it but thankfully your comment gave me some minor motivation.
You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters! Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
I have this Chinese incubator with two layers. The problem is humidity level is between 73 and 75. I lost a lot of bird babies cos they couldn’t come out of the egg shell which I guess was because of too much humidity level. It should be lower than 60%. Anyone help me please to set the humidity level. I followed the user Guide instructions but I didn’t work. Thank in advance.
Reksmey Ok so from researching I have done is low humidity around 50 to 60 % and in the final stages of incubating day 18 and on till hatching around 70 to 80% this helps soften the egg shell for the chics to break out of there shells. Best to do your own homework my info is only a guide probably not correct but giving you an idea to give you some help I hope.
@@renealopez3960 hello first I did this machine I first gave a space with the paper of the machine by the uct and the humidity 55 I found 37.7 at this temperature I have set this exact solution machine normally 38.2 temperature with this negative second if the moisture content of a bolumude full of 65 I find what I do This is because the air wave from the top of this machine cannot be fully removed and there will be no problem.
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works .. You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters! I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
@@renealopez3960 Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works .. You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters! I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
Would love it if you could add subtiles please. Not that your english is bad or anything, its just that the mic quality isnt the best and some words get lost along with the accent. English isnt my main language either so its hard to understand some of it.
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works .. You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters! I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
Nandagopan Jeyasundra - my temperature in the display is defective it used to go up to 38 in 10 mins. But now it is not going beyond 33.6 / 33.8. My 38 eggs got wasted recently.
@@tonmoyphukan You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
What are the factory settings supposed to be? I think I may have messed with them when I shouldn't have. What do the symbols mean for setting temperature and humidity etc? Thanks
Se per favore e' possibile sapere come si imposta la temperatura. Che ha a me non mi supera 35.1 Gradi.Sono disperato. Un video in Italiano? Ho istruzioni in Italiano. Grazie per chi aiutera' Vincenzo cell. 3337731200
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works .. You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters! I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
![Amazon 56 Egg Incubator [How to Use]](http://i.ytimg.com/vi/fTdv-32_1tY/mqdefault.jpg)
![Amazon 56 Egg Incubator [How to Use]](/img/tr.png)
I have the 48 egg incubator and it won’t stop beeping like the temp or humidity is too low, but they’re perfectly fine
How do you disable the beeping alarm
Help with the water filling please for this machine. Do we fill all channels or just outside ones. and how does the outside water hole fill up when it only goes to a small square
Been asking same question for past years. No reply.
You can use a wet sponge and keep adding water to the sponge as needed. Just ask Bob
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
I just use a straw and syringe to add water through the side. Thus far, I've seen on a blog that humidity problems do occur. The owner of the blog recommended to dry test a small batch for the 21 day period.
For me:; My humidity fluctuates. I added roughly 4 syringes of water and the humidity rose from around 47 to 58 been around the 53-58 range for the past 8hours. Aiming for 55 humidity with temperature of 38.1 Celsius. I will get the syringe measurement and post back here. Note that my incubator is housed in a Styrofoam box to help with heat management. I'm actually experience a lot of heat drops. Usually from 38 to 37, maybe 36.
How many watter ad this and wich areas
I have the 24 egg incubator. What are the two small yellow bits for? I’m not sure if eggs are being rotates
Hello Today I purchased this product,I had many doubts,how can I contact u for clearing my doubts,
Product came without assembled,I don't know to assembling processing,
And how much water add in it &how can add
Egg rotation is not working.
I have an incubator but in the night it always wakes me up with a low temperature alarm. Does anyone know how to turn it off permanently?
This may help from the manual which is a little difficult to understand. I don't believe there is a high / low setting for humidy, just one setting. If I discover differently I will try to update this note.
Display Description Factory Settings
AL Setting low temperature alarm 1°C (33.8°F)
AH Setting high temperature alarm 1°C (33.8°F)
AS Setting humidity 60%
CA Calibrating temperature transmitter 0°C (32°F)
HS Setting upper temperature limit 39.5°C (103.1°F)
LS Setting lower temperature limit 30°C (86°F)
Thank you
How do we set date again?
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
hello first I did this machine I first gave a space with the paper of the machine by the uct and the humidity 55 I found 37.7 at this temperature I have set this exact solution machine normally 38.2 temperature with this negative second if the moisture content of a bolumude full of 65 I find what I do This is because the air wave from the top of this machine cannot be fully removed and there will be no problem.
Heat from 50 to 55 humidity for chickens 37.7. At the end of the first 18 days of development will be heat 36.7 humidity 70.
Does anyone know how to stop the beeping sound ? It’s all night long
The alarm is going off every few minutes! Humidity (57) is flashing.
Why is it going off? How do I make it stop!
Did u figure out how to stop?
Mine keeps saying L. What does it mean?
I can’t find where or how to change the humidity levels and alarms. I do dry hatching and need to with this one!!! Can someone please help since ive just read we got dropped on a how to #3??
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
are you sure.
My humidity keeps flashing 62 how do I get it to stop, also how do I set the day counter for chickens?
how to turn off the automatic rotation on the 18th day? it still rotates aftr 18th day of incubation.
Disconnect the Turner
please tell me the normal temperatur and normal humilidy of this incubator
For me, the incubator came at 35 Celsius with Humidity of 50. But your settings would depend on the egg you are hatching. I'm from the Caribbean by the way. Temperatures might vary.
Merhaba
Bu kuluçka makinesinde fanlar neden zemine doğru üflemekte ?
Can anyone tell me what the three different parameters (AS AL and LS) are? Thank you in advance!
AL - setting low temp alarm
AS - setting humidity
LS - setting lower temperature limit
You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
Have got the 12 egg incubator .. does anyone know if there is a demo video for this?
Hi. Can you please help me with the names of the following and what it is used for. HD, HU,LS,HS, CA, AS, AH, AL. Kind regards
How much watts or voltage is the heating element.
please i have this kind of incubator and my humidity is aroun 90 s
Omg 90% wtf
Open a vent or something.
What are you hatching Turtles
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
I wish she would explain it better , I don't know how to get the eggs day set and how to get the humidity to were I want it , wish someone would help me please
how do we adjust humidity
Default is 1C , to change it: Hold the Settings button down for three seconds then you will want to go to the AH menu selection from there you will want to move the numbers up to your desired HIGH temp threshold. And repeat the process for your Low temp in the AL menu selection
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
@@TheLAShop You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the humidity figure is regulated, which means when the signal will go. But you can't regulate the humidity itself. Humidity can only be regulated by the amount of water that you add.
It would be nice if I could understand half of what is being said.
what are the temps this incubator should be and humidity
Same question here.
@@ericaelliott1516 I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
@@jessemarvinvelarde8331 I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
After working for 6 months, the Incubator temperature inside does not increase from 33.6/33.8 in the display. What is the reason? Is the fan a problem.
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
How do you stop the automatic turning
Unplug it. Or unplug it and take it out.
Just got one out of the egg today and and another 4 started so far so good although the thermostat is off by few degrees
Hello what temperature and humidity should be?
if its out a few degrees calibrate it with ca if its higher than it should be lower ca if its lower raise ca
@@jessemarvinvelarde8331 You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
@@jessemarvinvelarde8331 I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
How much for 45 eggs incubator
How much water we use in this incubator?
How do i reset the egg day counter thing someone please help me understand
How to set the Days? i just bought it and display for Days says 7, how to set it to count days from 0 or 1? Thank you 😊
Wondering too
Same bro
@@kassadie6675reset button and unhook the power cord in the face plate at the same time
I need 48 egg machine how much
my incubator runs about 37. humidity is way up I live in north carolina how much water do I need to add to get correct humidity? help! I placed eggs in about 24 days ago and none have hatched..
Hi! The temp and humidity may be affected depending on the environment as well. Is the incubator set at an average room temp? anywhere between 68-74 degrees?
They are dead 💀. You can check your 🥚 with a good flashlight after six days you can see the veins inside the shell.
The LA Shop i have this kind machine im not sure if its work perfectly course the temperature is between 37.8 - 38.4. can i succesifully if i put the eggs? And the humidity is between 70 t0 72
The LA Shop The LA Shop i have this kind machine im not sure if its work perfectly course the temperature is between 37.8 - 38.4. can i succesifully if i put the eggs? And the humidity is between 70 t0 72
I am wanting to know how much water do I put in the bottom of the incubator do I just put in the middle section or do I do the whole perimeter need answers asap thanks
How much water to be used in 48egg incubator
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
How do we adjust the Humidity. I see this question being asked over and over with no answer. Just set up system and Humidity it super high.
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
My incubator beeps even when it has 55 humidity and 37.5 temperature... same incubator as yours here.. pls help
Can you confirm if it is the humidity or temperature that is flashing when it starts to beep?
Thanks La but u reply very late ... now I know it was the humidity
@@sas_grimreaper4987 We sincerely apologize for the delay response. You may contact us directly via email if you have any other questions at sales@thelashop.com
i managed to hatch one set of eggs,but cant get the temp to 37/5 now,any ideas whats the matter,its only 2 months old
I had the same issue with the older model, I ordered a new heater and replaced it... Google this: 80W Incubator heating
@@DirkVoortmans thanks for this!
I brought one of these and read the instructions but can't get the hs setting lower then 30.0, does anyone know if I can get it lower as need to get it at 29c but mine will not go lower then 30c.
Can you show how to set the humidity and the temperature for the chicken eggs and the days setting I got the incubators but had trouble set the humidity what is the setting temperature should be on . Thank you
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
My humidity sensor doesn't work how to repair
Is there another video, showing the next steps to take? Thanks
Hello! Unfortunately, we do not have a continuation to this video as of yet. However, if you do have nay questions, please feel free to ask and we will do our best to help you!
How do you set the counter for the days
Is the incubator supposed to stay in the foam case it comes in?
@@chriscorcoran6983 why not just use the calendar chicks hatch in 21 days.
@@TheLAShop how do i the beeping noise in the machine
How to fetch the water in this incubator.please tell me.thank you
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
Are you supposed to turn the eggs or is it fully automatic, thanks
automatic
@@tiredhero some ppl suggest turning the eggs twice a day additionally?? But my hatch rates always been low so want to try something different
@@AtifAli-yx6bm would probably be better fully turning them your self as these only turn about 45 degrees... i made my own incubator before and got better hatch rates than using this... but i didnt turn them my self but that was quail eggs i used im going to try some silkies and other bantams soon in this one see how it goes turning them my self...
@@tiredhero tbh ive litterally just put 24 eggs in the incubator now and hope for a good hatch rate but usually get like 50% but the time i used eggs from my own hens i had a much higher hatch rate
@@AtifAli-yx6bm so i binned the incubator and made one with a inkbird a heat lamp and a styrofoam box.. hatched 5 out of 5 but lost one.. so ended up with 4 chicks... best hatch rate i have had..
How to decrease humidity ???
My incubator is overheating.what's wrong? I setup the machine to 37.7c but continue to increase until reach 41.5 and not comes down.....please help me ...thanks
Hello! Please make sure that there is enough water to humidify and control the temp.
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
This is crap, I have one of it and I never had good results, from 48 good eggs you can get 15 chicks if you are lucky. I have to investigate, but I believe that the temperature on the sides is lower than in the middle
Well are you sure all the eggs were fertile? You dont get chicks from every egg unless you are 100% sure the rooster has mated with all the chickens before the egg was laid.... if any eggs hatch, that means the machine worked just fine. Just means the rest of the eggs werent fertile.
@@AIAllar only 5 eggs of 48 wasn't fertile, the rest had dead chicks inside. I think that the temperature in the center is OK but a bit colder on the sides. I have only 13 chicks but I'm happy. At this time I have another 48 eggs in it but this time I insulated the bottom and sides. I wish I can upload a video to show you
@@mandelman4518 it iss this is a crapp incubator i had best results with my janoel 12 bestt incubator for good results i had bought shipped eggs off ebay and 6 hatched out of 12 so 50%hatched i was pretty suprised for shipped eggs but thiss here noo the eggs on the side feel colder but the middle kinda warmm
I actually am now starting off on this. Was given this incubator to run some trail 'common' flow eggs. Fortunately, I placed my eggs in the center. Not sure what made me do it but thankfully your comment gave me some minor motivation.
I cannot get my humidity to set to 50 what did I need to do?
Hi ! What is the temperature being set to? Send us a message to sales@thelashop.com
You don’t need to touch it, so you knock the settings, but you don’t adjust the humidity. So only the digit is regulated, which means when the signal will go. But you can't regulate the temperature itself. Just press briefly on the top button on the left and select the desired temperature with the keys up and down. Do not do anything with factory settings, where CA and other letters!
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
Can you send me parameters for
FA
HS
LS
CA
Thank you
I touched earlier HS and FA and i need original parameters
@@ognjenmrakovic5348 HS: 39.5°C (103.1°F), LS: 30°C (86°F), CA: 0°C (32°F)
Can you please tell me how to reset day counting on this incubator? Thank you
Hold down the red/green arrow button.
There is no red or
Green arrow, please explain
@@thecakeladytm9962 thank you soo much
How do I set my temperature to 37.5 and humidity to 60
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
I have this Chinese incubator with two layers. The problem is humidity level is between 73 and 75. I lost a lot of bird babies cos they couldn’t come out of the egg shell which I guess was because of too much humidity level. It should be lower than 60%. Anyone help me please to set the humidity level. I followed the user Guide instructions but I didn’t work. Thank in advance.
Reksmey Ok so from researching I have done is low humidity around 50 to 60 % and in the final stages of incubating day 18 and on till hatching around 70 to 80% this helps soften the egg shell for the chics to break out of there shells. Best to do your own homework my info is only a guide probably not correct but giving you an idea to give you some help I hope.
Did you ever get any help with your Humidity???? I just got mine and I am having the same problem.. Please help..
@@renealopez3960
hello first I did this machine I first gave a space with the paper of the machine by the uct and the humidity 55 I found 37.7 at this temperature I have set this exact solution machine normally 38.2 temperature with this negative second if the moisture content of a bolumude full of 65 I find what I do This is because the air wave from the top of this machine cannot be fully removed and there will be no problem.
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
@@renealopez3960 Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
The EE symbol for egg tray, 32 eggs, appears
Would love it if you could add subtiles please. Not that your english is bad or anything, its just that the mic quality isnt the best and some words get lost along with the accent. English isnt my main language either so its hard to understand some of it.
Like at 1:53 i hear "most important ...something-something... humidity... and i really get what is being said.
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
How much water u out in im trayin to get the humidty hight at 45 but im havin trouble
Nandagopan Jeyasundra - my temperature in the display is defective it used to go up to 38 in 10 mins. But now it is not going beyond 33.6 / 33.8. My 38 eggs got wasted recently.
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
@@tonmoyphukan You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
How do I tell if my egg turner is working?
Hi Taylor, please watch at 3:50 min into the video to confirm if the settings is done correctly.
The LA Shop is there a way I could of connected the wires wrong because it’s brand new
What are the factory settings supposed to be? I think I may have messed with them when I shouldn't have.
What do the symbols mean for setting temperature and humidity etc? Thanks
How much ...this incubator.
Do you have to turn eggs every 2 hours?
No 2 times a day but not on the last 3 days stop turning them at this point in stage of time they are positioned to hatch.
same here I watched videos about turning time and it says 4-6x a day,but this incubator has 2hrs interval..can it affect the egg?
اكو عراقيين فشلتونه 😂😂😂😂
حسيت نفسي غريب 😂😂😂💔🙂🌝🤬
где покупаете инкубатор мини
How much?
How much
I haven't had any luck with it no hatch @ all the humidity is @ 65 70 temperature is @38.1 i dont know why
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
Интересувам се как се включва за работа ,как се работи с него имам го но не мога да го пусна благодаря предварително ако може някой да ми помогне
how mach
How much price this ?
Awesome
Good.
the ontroll panel is fantastic the container is crap more fluctuation than my boyfriends underpants
Did you use the styrofoam to keep the heat in?
@@Beckysgetsittogether yes luv i had to or the hatch rate was so poor
@@rachaelknight8048 The manufacturer recommends using the styrofoam.
@@Beckysgetsittogether yea your hatch rate would be pants without the foam
Se per favore e' possibile sapere come si imposta la temperatura. Che ha a me non mi supera 35.1 Gradi.Sono disperato. Un video in Italiano? Ho istruzioni in Italiano. Grazie per chi aiutera' Vincenzo cell. 3337731200
Add very little water. Right now, I add 1 teaspoon every 1.5 hours. This is the only way it works ..
You do not need to touch this, so you knock the settings, but you do not adjust the humidity and temperature. So only the digit is regulated, which means when the signal will go. But you cannot regulate the temperature or humidity itself. But to set the temperature, just briefly press the upper button on the left and select the desired temperature with the up and down buttons. Do not do anything with factory settings, where CA and other letters!
I do everything at a temperature of 37.7-37.8 approximately, the humidity is constantly 50-55, this is only for birds, for example, chickens, guinea fowls, quails, which are not waterfowl (!)
Any one that takes one thousand
It's helpful
I recommend adding English subtitles, please.
too bad it was not made for americans
Rat rideo ras ro rad
هي
How do I turn off the humidity alarms?
Following. I just bought one and it doesn't persure after the first 2 minute
Highest temperature and humidity setting how?
Highest temperature setting
can this incubator work for turkeys as well
Try sports man incubator for turkey eggs.
How do I adjust humity ? Help
Yes
Hello
How do you reset the day counter?