Good work Nero. I love my KlipperScreen and would not want to deal without it. Been running for over a year now and it has seen lots of improvement. Its now a very nice product to use.
Yeah I have a 7inch panel duet or the BTT 7inch screen and if those are too big I have a 7inch LCD I got off of Amazon so I'm thinking 7 inch display is in my future. 😂
“7” Pi screen… it’s massive” 🤣 As I stated in my other comment, my eyes are “more mature and experienced”. I’m pushing seventy, and sadly find that 13” or 15” screens are becoming necessary for being able to focus. A saving grace on modern displays is the far higher resolutions. I saw a current-gen iPad, 10” screen, and was amazed at how clear it was… still slightly difficult to focus, but useable. (Of course, the $$ was ‘hi-rez’ also 🤔) BTW, my main computer screen setup is a 4k 32”, with a 2k 32” and 2k 27” secondaries off my Linux Boxen. Yes… ‘old eyes’ indeed…
I just hooked my RasPi up to a projector. Now I have a 1000" screen. I made a huge plate of sensors that I correlated to the image so it's 'touchscreen'. I got one of those rolling ladders they use in a library so I could reach the top parts of the screen. Overkill for a 200x200x200 3d printer? Not a chance.
I was on the edge of doing it, you convinced me... now it's done (10 days to canada from China!!) and I'm really happy with it. Just don't be stupid as me and use the DSI (Display) connector... no the CSI (Camera) connector... ! Not a big fan of the mount, but it does the job.
Wow what timing! I just got back to configuring klipper after taking a break from it for a few days. Just powered up my ender 3 max and fluidpi and the TH-cam suggested this video.
I've been using KlipperScreen since it's early implementation. Developper was very responsive to the many issues I reported and now it works really well. I've installed it on a 3.5" and 7" screen and both are fully functional. Also used in on a Pi 4 and Pi Zero. The zero response time could be better but is still functional but a camera is not possible. The 3.5" were in an enclosure I modified from Thingiverse and mounted on ender 3 pro, ender 3 V2 and CR 10 Max. I was very happy with it.
Amazing work and amazing video, im begining un klipper and I have a question. With the screen installed in the printer you also have the posibility to control the printer through web(Mailsail,...) Or with the screen installed can you only control the printer through the screen?? Thanks for all.
Klipperscreen docs said "it doesn't even need to run on the same host", perhaps I can run a Pi Zero 2 W + 3.5 tft tucked it under my desktop monitor for "remote" monitoring? maybe add battery kit it become portable screen? :D
Someone needs to design some mechanism where it's retracted into the printer vertically, you push the screen, mechanism unlocks, spring and slow-down mechanism nicely retracts the screen. I believe it's something some of the desktop paper printers have. Aluminium black anodised bezel would be nice too. Lastly, not sure if it's a thing, but it could use some nice voron logo boot screen not the nasty OG RPI command prompt one, would make it look more professional.
I have purchased a FLSUN speeder pad and its always showing the same error as firmware issue, im unable to connect to my printer, i tried some solutions but none of them seem to work. Can you kindly help me out?
Nero, you have wonderfully informative videos. I have KlipperScreen installed and looking to see how to upload files to the printer from within it. If I heard you correctly in the video (5:18) you stated that you "CAN NOT" use KS to upload files. If this correct?
I've been running Klipper for awhile now and decided that I would give KlipperScreen a go, I picked up a BTT PITFTF50 V2.0, the same screen that you have used in this video, but when I connect the screen to the Pi I can no longer connect to the Pi on Putty, I can't upload prints directly from Cura, Cura has an add in for this, and I can't connect by the web interface either.
can you set this up to be a remote screen solution? Like I want to be able to monitor my printers status from my desk on a remote screen and my printers are on the other side of the room.
Good Day, perfect timing on the video, and thank you for making it. You mentioned in your video that there was a GPIO adapter, do you have a link where I can find more information on it?
i installed the same screen. The installation was riddled with problems, nothing worked just from installing the script . after long time of troubleshooting i got it to display but for the life of me i can't get the touch to work . The official troubleshooting guide was useless .
Currently running klipperscreen however It will only work when I usb the pi into the skr2 I would like to do the 3 wire uart connection to the tft pins on the skr 2 but when I do this the web interface (mainsail) works just fine but klipperscreen won't do anything as a UI for controlling the printer can't find any literature on this at all
Hello. I have a manta m8p and cb1 as well as the pitft50. When I plug the pitft50 in to the manta board the cb1 won't boot. I see that the manta has power it click the bktouch on. I have tried flipping the ribbon cable around. Nothing seems to work I have tried putting the tft50 on my old pi 3b+ and I get a screen. When the tft is not plugged in to the manta board. Everything boots fine i can access it from the web. Just not with the pitft50 plugged in.
Sweet. Been wondering about this one for quite some time. Maybe something for my next Voron build. Would be interesting to see something with Quickdraw/Klicky probe as well :)
This is great info, thanks. I just picked up an old Ender 5 Plus and am planning on converting to a BTT Manta with a CB1. I already have a Pi TFT50 to pair up with it. Looking forward to diving into Klipper for the first time. 😊
I think this is what I’m going to choose for the Mercury upgrade. I’ve got a Sovol SV05 that should convert well and the BTT Manta/CB1 looks like an awesome choice for the brains.
@@Serene-Scream Yeah, just like everything else tech I’m sure as I dig in I’ll find out quickly what works and what doesn’t. Cross compatibilty is a challenge to this day.
The interface looks very nice! Do you know if there is an option to print via SD card or usb thumb drive? This would be more straight forward in my usecase (printer in an office) than uploading the files via network.
There is nothing more straight forwards than upload your g-code with the slicer... you can print right away, without even seeing the printer physically, and upload g-codes for later while it's printing unchecking the "Print now" checkbox
@@ALFrix0 getting that and I have to totally agree... When you have the printer on an easy accessible network. In my use case it's a very locked down network that is controlled and managed by the IT people of the company. So not everyone has access to the network, especially with your private computers. So printing of a usb stick would just be much more convenient and easier to setup for everyone.
@@killertoast96 I second this, one of the reasons I want to build a V0 is to have a travel printer that I can take wherever I want with me. Setting Klipper up on every single different network is just out of the question.
@@squirrelrobotics I just found an answer on the Klippers Discord from user Bjorn: "Yes you can setup your raspberry pi to auto-mount an usb drive and maybe just use a symlink from your gcode folder to the usb drive." So I think it is possible, but I can't verify it yet
I have two problems after doing the installation: 1. I can no longer access MainsailOS with my browser. 2. When booting the Raspberry I see something on the touchscreen but then MainsailOS asks for login data.
Hi, I am sourcing for a new voron 2.4 printer and I intend to leave it on the floor. Do you think it would be possible to mount the screen on top of the printer instead of where it is designed to be installed? I think it would be hard to operate the screen when it is so close to the floor.
Thank you. I just finished installing the software and fired up the screen, runs beautifully. I am printing the mount now. I also would like to see you tackle Quickdraw Klicky probe.
So I installed Klipperscreen. Used a BTT PI TFT50. It loads and Klipperscreen comes up. But when screen is connected to the pi the Fluidd web interface can't connect. If I disconnect the screen the browser loads. Any ideas?
Hi Nero...i'd like to add in the startup a splash screen (actually MP4 video ~60 seconds) before the Klipper touch interface appears. It'll have the Voron logon. Do you have directions for that...or could point me in the right direction please?
If I add a large waveshare display , can’t I simply connect the display hdmi and usb cap touch cables to the Pi that’s already there? I want to use the super wide 7.9” display.
Hi I'm running a Voron 2.4 and I have a pi cam installed at the moment using that cable connector. Is there a way to running my cam with the tft50 screen together?
Question. Does this setup eliminate network connection completely for the everyday use? Can I run it as I would run the typical Marlin? Asking because I'm working on a 3D printing project at school and I do not want to deal with ITS.
What if I use octoprint? Because i think that that doesn't use moonraker right? Is it even with it to use octoprint anymore? The only reason is for me that I can download so much plugin like 'octoprint everywhere' and 'PSU control'
Since there is an absolute drought of RPis, have you looked into using a RockPi as an alternative? They allegedly are faster than RPi3s and have DSI connectors. And you can still get them for what you used to pay for a RPi in the good old days. The issued that reviewers had with the RockPi might just all be irrelevant when used to run Klipper.
If screen that drops directly on pi is used you will not be able to use the input shaper as the screen already uses i2c pins and the imu will not be able to connect
@@CanuckCreator I tried It doesn't work it always searched for the screen and neglects any other device once you install the correct drivers for the screen you can't unload It .btw great work
Hello I have an 35TFT which has both ribbon cable (EXE), and TFT connector. Can i connect it to my raspberry or skr mini e3 v2? i want to use it on my voron 0.1
If you've used a 12864 and modified the settings regarding the menu tree, (I removed Octoprint section, added a park head and QGL option to the menu) and set it so that the 12864 displays the chamber temps, will this stuff transfer over on to the new menu? Does the KIlipperScreen have an option at startup to use a simulation of the 12864's display like some BTT TFT setups?
How did you use this mount with your pi tft50 ? I have one and I would like to use this mount but I cannot figure out how you set threads in the corners ?
You mean the brass inserts? In that case they are heatset inserts that you melt down into the plastic. This model is made for Vorons so they use the standard Voron size that can be found in the Voron sourcing guide for V2.4, Trident and Switchwire. They are super cheap on AliExpress and ship quickly !
@@erikhellman3974 yes but those heat set inserts are in the plastic mount. The screen itself looks like it has mounting points in the corners. The screen only comes with mounting points in the center for the raspberry pi as standard It appears that he has affixed some kind of threaded metal piece to the corners of the screen in this video.
Hi mate, thanks for explaining this, but I'm a newbie and I'm wondering how does the raspberry PI actually tell the printer what to do? How does it connect?
Maybe his views has changed since there has been updates but I think most people’s reasoning goes something like this: “They do the exact same thing but they look different, I prefer the look of one, which is why I’m not using the other”
Could an old ipad work? Think it might be 1st gen or something. Updates for it is not supported anymore. It will not show fluidd in the web browser.. hmff.
Since it requires the moonraker API unfortunally it is fluidd/mainsail only at this time, octoprint has its own equivalent of a touch screen interface though
Anybody know why I would not be getting a connection to Moonraker? This is all a new install and I am new to all of this. I got everything installed and have no connection to Moonraker and can not bring up Fluidd page.
Good work Nero. I love my KlipperScreen and would not want to deal without it. Been running for over a year now and it has seen lots of improvement. Its now a very nice product to use.
Haha I feel kinda called out on the “large screen “ comment, I have a 7” Pi screen. It’s massive but works awesome
I mean I you really wanted to you could swap a side panel for a screen and show the camera feed from the inside 🤣
do you have stl's for mount of the 7" Pi screen?
Yeah I have a 7inch panel duet or the BTT 7inch screen and if those are too big I have a 7inch LCD I got off of Amazon so I'm thinking 7 inch display is in my future. 😂
“7” Pi screen… it’s massive” 🤣
As I stated in my other comment, my eyes are “more mature and experienced”.
I’m pushing seventy, and sadly find that 13” or 15” screens are becoming necessary for being able to focus.
A saving grace on modern displays is the far higher resolutions.
I saw a current-gen iPad, 10” screen, and was amazed at how clear it was… still slightly difficult to focus, but useable.
(Of course, the $$ was ‘hi-rez’ also 🤔)
BTW, my main computer screen setup is a 4k 32”, with a 2k 32” and 2k 27” secondaries off my Linux Boxen.
Yes… ‘old eyes’ indeed…
My inner fourteen-year-old is having a blast. 🙃
I just hooked my RasPi up to a projector. Now I have a 1000" screen. I made a huge plate of sensors that I correlated to the image so it's 'touchscreen'. I got one of those rolling ladders they use in a library so I could reach the top parts of the screen. Overkill for a 200x200x200 3d printer? Not a chance.
I was on the edge of doing it, you convinced me... now it's done (10 days to canada from China!!) and I'm really happy with it. Just don't be stupid as me and use the DSI (Display) connector... no the CSI (Camera) connector... !
Not a big fan of the mount, but it does the job.
Wow what timing! I just got back to configuring klipper after taking a break from it for a few days. Just powered up my ender 3 max and fluidpi and the TH-cam suggested this video.
I've been using KlipperScreen since it's early implementation. Developper was very responsive to the many issues I reported and now it works really well. I've installed it on a 3.5" and 7" screen and both are fully functional. Also used in on a Pi 4 and Pi Zero. The zero response time could be better but is still functional but a camera is not possible. The 3.5" were in an enclosure I modified from Thingiverse and mounted on ender 3 pro, ender 3 V2 and CR 10 Max. I was very happy with it.
PIZero2W is far better than PizeroW, i tested with two differnt cameras and the cpu load is absolutely fine, no issues on moonkraker and klipperscreen
@@CallistoPili that is great news. Now I just need to find a place that still has them in stock.
New camera setup looking goooood! Excellent content as usual!!! Cheers!
Amazing work and amazing video, im begining un klipper and I have a question. With the screen installed in the printer you also have the posibility to control the printer through web(Mailsail,...) Or with the screen installed can you only control the printer through the screen?? Thanks for all.
Awesome, I've been looking for a good graphical guide on this. Thank you
Awesome dude! Do you know if this will work with the PITFT 43 as well?
This is great I just picked up one of these off amazon - I've been running back on fore to my PC for now since I built my voron. Cant wait to fit it!
Wow that camera is sharp.
Klipperscreen docs said "it doesn't even need to run on the same host", perhaps I can run a Pi Zero 2 W + 3.5 tft tucked it under my desktop monitor for "remote" monitoring? maybe add battery kit it become portable screen? :D
Someone needs to design some mechanism where it's retracted into the printer vertically, you push the screen, mechanism unlocks, spring and slow-down mechanism nicely retracts the screen.
I believe it's something some of the desktop paper printers have.
Aluminium black anodised bezel would be nice too.
Lastly, not sure if it's a thing, but it could use some nice voron logo boot screen not the nasty OG RPI command prompt one, would make it look more professional.
you can mount a tablet and acces over wifi mainsail so you have all your options as well, I normaly use my smartphone...
Looks like you've been doing a bunch of work to the studio. The video from the new camera looks great.
I have been and Thank you!
I love Klipperscreen! I like the option to bed and to reboot or shutdown the printer without having to log into my PC.
I have purchased a FLSUN speeder pad and its always showing the same error as firmware issue, im unable to connect to my printer, i tried some solutions but none of them seem to work. Can you kindly help me out?
New Camera looks great!!
It's nice to have a graphical interface but it doesn't really use colors extensively and the icons are very basic like icons from the 90s
Nero, you have wonderfully informative videos. I have KlipperScreen installed and looking to see how to upload files to the printer from within it. If I heard you correctly in the video (5:18) you stated that you "CAN NOT" use KS to upload files. If this correct?
I've been running Klipper for awhile now and decided that I would give KlipperScreen a go, I picked up a BTT PITFTF50 V2.0, the same screen that you have used in this video, but when I connect the screen to the Pi I can no longer connect to the Pi on Putty, I can't upload prints directly from Cura, Cura has an add in for this, and I can't connect by the web interface either.
can you set this up to be a remote screen solution? Like I want to be able to monitor my printers status from my desk on a remote screen and my printers are on the other side of the room.
Good Day, perfect timing on the video, and thank you for making it. You mentioned in your video that there was a GPIO adapter, do you have a link where I can find more information on it?
Can you do a video of connecting a display via Canbus?
(like a BIGTREETECH TFT35 SPI with the IO2CAN board ?)
Yo. Nero you have a video on the Mini12864 display klipper setup?
Google isn't my friend in this case.
i installed the same screen. The installation was riddled with problems, nothing worked just from installing the script .
after long time of troubleshooting i got it to display but for the life of me i can't get the touch to work .
The official troubleshooting guide was useless .
Where is the install tutorial for moonraker !
I installed Mainsail OS to my Raspberry and KlipperScreen along with it, everything works except the touchscreen, which worked under OctoPi...
Currently running klipperscreen however It will only work when I usb the pi into the skr2 I would like to do the 3 wire uart connection to the tft pins on the skr 2 but when I do this the web interface (mainsail) works just fine but klipperscreen won't do anything as a UI for controlling the printer can't find any literature on this at all
Hi everyone, does anyone know if it's possible to display in portrait mode, rather than landscape mode?
Thanks for the video!
Unrelated Question: whats the filament used to print the left hand side printer with? (The orange/light blue printer)
Cheers
Hello. I have a manta m8p and cb1 as well as the pitft50. When I plug the pitft50 in to the manta board the cb1 won't boot. I see that the manta has power it click the bktouch on. I have tried flipping the ribbon cable around. Nothing seems to work I have tried putting the tft50 on my old pi 3b+ and I get a screen. When the tft is not plugged in to the manta board. Everything boots fine i can access it from the web. Just not with the pitft50 plugged in.
Could you let us know how to get klipperscreen to work with 2 printers I'm struggling to get them to work?
awesome just what I was looking for, thx!
Sweet. Been wondering about this one for quite some time. Maybe something for my next Voron build. Would be interesting to see something with Quickdraw/Klicky probe as well :)
Hey, fantastic video. Do you know if it will work with a Bigtreetech TFT 35? Thanks.
This is great info, thanks. I just picked up an old Ender 5 Plus and am planning on converting to a BTT Manta with a CB1. I already have a Pi TFT50 to pair up with it. Looking forward to diving into Klipper for the first time. 😊
I think this is what I’m going to choose for the Mercury upgrade. I’ve got a Sovol SV05 that should convert well and the BTT Manta/CB1 looks like an awesome choice for the brains.
@@TheJacklwilliams unfortunately the Pi TFT50 is not compatible with my setup using the CB1 rather than a CM4 so I had to go with an HDMI display
@@Serene-Scream Yeah, just like everything else tech I’m sure as I dig in I’ll find out quickly what works and what doesn’t. Cross compatibilty is a challenge to this day.
Any thoughts on whether or not this will work with the BTT Pico?
Was looking at that same screen the other day. Thanks for detailed intro. Will have to get one :).
Question - if you want to use a BTT50 like this - AND a rasp pi camera - how does that work with the cables?
Hello, do you think we can adapt the BIGTREETECH TFT70 with Thank you Klipperscreen
Tried this with waveshare 4.3 and the display is ok but the touch isn't working. Any idea what I should look to? Thanks
The interface looks very nice! Do you know if there is an option to print via SD card or usb thumb drive? This would be more straight forward in my usecase (printer in an office) than uploading the files via network.
Exactly what I'm wondering too, not being able to normally is a major downside of Klipper imo
There is nothing more straight forwards than upload your g-code with the slicer... you can print right away, without even seeing the printer physically, and upload g-codes for later while it's printing unchecking the "Print now" checkbox
@@ALFrix0 getting that and I have to totally agree... When you have the printer on an easy accessible network. In my use case it's a very locked down network that is controlled and managed by the IT people of the company. So not everyone has access to the network, especially with your private computers. So printing of a usb stick would just be much more convenient and easier to setup for everyone.
@@killertoast96 I second this, one of the reasons I want to build a V0 is to have a travel printer that I can take wherever I want with me. Setting Klipper up on every single different network is just out of the question.
@@squirrelrobotics I just found an answer on the Klippers Discord from user Bjorn: "Yes you can setup your raspberry pi to auto-mount an usb drive and maybe just use a symlink from your gcode folder to the usb drive."
So I think it is possible, but I can't verify it yet
Hi , what are the spaces under the heat bed please?
I have two problems after doing the installation:
1. I can no longer access MainsailOS with my browser.
2. When booting the Raspberry I see something on the touchscreen but then MainsailOS asks for login data.
Hi, I am sourcing for a new voron 2.4 printer and I intend to leave it on the floor. Do you think it would be possible to mount the screen on top of the printer instead of where it is designed to be installed? I think it would be hard to operate the screen when it is so close to the floor.
Thank you. I just finished installing the software and fired up the screen, runs beautifully. I am printing the mount now. I also would like to see you tackle Quickdraw Klicky probe.
can i get the mount link?
i'm building a voron 2.4 350mm and use a manta motherboard with mb1 to do the job of a pi. Can i install it on that configuration with your steps??
If I've installed Klipper on a old laptop, can Klipperscreen use the laptop's LCD screen and keyboard?
what if your screen is upside down and no switch to flip it?
Could you add a link to the ribbon cable for TFT50. Maybe I missed it in the comments.
Does the tft50 have a terminal input, so that you can send commands to the pi?
followed your video, but the "touch" potion doesnt work. What could I be missing?
do you know how to use multiple 3D printers with one clipper screen ? I can't cope with the instructions.
is it possible we can plug usb into raspberry pi and upload file from usb only to print ?
So I installed Klipperscreen. Used a BTT PI TFT50. It loads and Klipperscreen comes up. But when screen is connected to the pi the Fluidd web interface can't connect. If I disconnect the screen the browser loads. Any ideas?
Hi Nero...i'd like to add in the startup a splash screen (actually MP4 video ~60 seconds) before the Klipper touch interface appears. It'll have the Voron logon. Do you have directions for that...or could point me in the right direction please?
If I add a large waveshare display , can’t I simply connect the display hdmi and usb cap touch cables to the Pi that’s already there?
I want to use the super wide 7.9” display.
can be custom macros added to the screen menus?
can I load a sd card with gcode and place it on the screen to print? or do I have to use the online upload?
I do the same on this video but klipperscreen not starting. On my screen see end of loading and bellow -->
Raspbian GNU/Linux 11 rpi tty1
rpi login:
Hi
I'm running a Voron 2.4 and I have a pi cam installed at the moment using that cable connector.
Is there a way to running my cam with the tft50 screen together?
And if I have an Orange Pi 4 LTS - can I connect this display?
AWESOME VID! thank you so much man!
Hello good vidéo ici have problem the menu mouvement don't work but all thé rest work correctly do you already see this problem thanks
Can I also install it on my stock screen that came with my Neptune 3 pro.
Question. Does this setup eliminate network connection completely for the everyday use? Can I run it as I would run the typical Marlin? Asking because I'm working on a 3D printing project at school and I do not want to deal with ITS.
is btt tft35 work with this ?
hey nero. what's is the modle of touchscreen ?
What if I use octoprint? Because i think that that doesn't use moonraker right? Is it even with it to use octoprint anymore? The only reason is for me that I can download so much plugin like 'octoprint everywhere' and 'PSU control'
Are you able to run a Raspberry Pi camera (CSI) along with the BTT TFT50 (DSI) at the same time, on both connectors? (with Klipper + Fluidd, etc)
great video thank you! would this mount work for a trident 250 build?
I dont believe this mount in particular will fit. Its meant for the v2 which sits up higher than my v1.8(that this was originally going to go on).
I have the same display bit it only detects a resolution of 720x480 not the 800x480' and through config I cant set my desired res
Any idea on how to edit the presets it shows (like ABS, PETG, etc...)?
Since there is an absolute drought of RPis, have you looked into using a RockPi as an alternative? They allegedly are faster than RPi3s and have DSI connectors. And you can still get them for what you used to pay for a RPi in the good old days. The issued that reviewers had with the RockPi might just all be irrelevant when used to run Klipper.
is it possible to do this with the tft cable included with the tft35?
CAN YOU INSTALL ONE ON THE MANTA BOARD ?
I have the btt 3.5 v3 screen atm can klipper screen run on that?
If screen that drops directly on pi is used you will not be able to use the input shaper as the screen already uses i2c pins and the imu will not be able to connect
you could remove the screen, do your input shaper tuning with the accelerometer, then re-install the screen after
@@CanuckCreator I tried It doesn't work it always searched for the screen and neglects any other device once you install the correct drivers for the screen you can't unload It .btw great work
Hi, a movie on how to install raspberry pi screen on voron 2.4?
Thank you for you wonderful work/presentation!
Any chance you can share the stl for this mount ?
Can i use klipperscreen with klipper on octoprint?
what kind of spacers are under your bed?
Hello
I have an 35TFT which has both ribbon cable (EXE), and TFT connector. Can i connect it to my raspberry or skr mini e3 v2? i want to use it on my voron 0.1
If you've used a 12864 and modified the settings regarding the menu tree, (I removed Octoprint section, added a park head and QGL option to the menu) and set it so that the 12864 displays the chamber temps, will this stuff transfer over on to the new menu? Does the KIlipperScreen have an option at startup to use a simulation of the 12864's display like some BTT TFT setups?
Klipperscreen is independant of the .config screen settings. Its its own thing
How did you use this mount with your pi tft50 ? I have one and I would like to use this mount but I cannot figure out how you set threads in the corners ?
You mean the brass inserts? In that case they are heatset inserts that you melt down into the plastic. This model is made for Vorons so they use the standard Voron size that can be found in the Voron sourcing guide for V2.4, Trident and Switchwire. They are super cheap on AliExpress and ship quickly !
@@erikhellman3974 yes but those heat set inserts are in the plastic mount. The screen itself looks like it has mounting points in the corners. The screen only comes with mounting points in the center for the raspberry pi as standard It appears that he has affixed some kind of threaded metal piece to the corners of the screen in this video.
@@TheFlyguy62 there are little plastic covers over the corner threads - at least on mine. I peeled those off and they just threaded in as normal
Hi mate, thanks for explaining this, but I'm a newbie and I'm wondering how does the raspberry PI actually tell the printer what to do? How does it connect?
USB cord from pi to printer
Ok, before I even watch the video, great update on the title screen. Now I don't need to fast forward through that old song anymore.. lol
Thanks! This did do the job for me!
Thanks for the video, it's very educational ... I have a question: which one do you like better and why, Fluid or Mainsail (last update)?
Maybe his views has changed since there has been updates but I think most people’s reasoning goes something like this: “They do the exact same thing but they look different, I prefer the look of one, which is why I’m not using the other”
Pretty much this, i lean more towards fluidd
How do we get a stock Ender 3 screen to work with Klipper while running and SKR mini e3 v2?
You wait and prey that someone writes the code to make such a thing possible.
Do klipperscreen and mainsail/fluidd interface with eachother?
The both work through the moonraker api to communicate. So yes
Of course now I *want* an old amber CRT as my printer interface...
so it is possible to use this touchscreen with a voron 0.1? it runs also klipper i have never seen somebody doing this
If you can find a way to mount it, go for it.
Could an old ipad work?
Think it might be 1st gen or something. Updates for it is not supported anymore.
It will not show fluidd in the web browser.. hmff.
Have you tried Mainsail or Octoprint?
@@petiocskos no
can I use it if my machine is using octoprint instead of fluidd/mainsail?
Since it requires the moonraker API unfortunally it is fluidd/mainsail only at this time, octoprint has its own equivalent of a touch screen interface though
@@CanuckCreator and what would be that equivalent?
Anybody know why I would not be getting a connection to Moonraker? This is all a new install and I am new to all of this. I got everything installed and have no connection to Moonraker and can not bring up Fluidd page.
I have same problem, did you find solution for this?
@@larsloro306 I had to reinstall acouple of times to get e erything working. Such a pain.
what size is that blue voron?
would you advice against making 400x400 or even 500x500 voron2.4 or it's better to stick to standard size as 350x350?
great walkthrough video 👍😀