Andrew, I really enjoy your channel. You are very smart and talented and you do great work. Just one small suggestion: listen to your dad. He said at one point during the video that you really needed to have your safety glasses on. I totally agree. I was a machinist for over 40 years and I have seen many eye injuries in that period of time and 99% of them could have been avoided if only the person would have taken a few seconds and put on eye protection. I was one of those people myself and it only took once to convince me that my eye sight could be taken away in a split second. So listen to Pops and wear your safety glasses. Keep up the good work and I`ll see you on the next one.
Great job. You are really tackling some big jobs. It's obvious you did your homework and were prepared. And just think how much easier these will be when you do them in a proper shop with a lift as opposed to your driveway! Best lines of the video: "I'm going to take a break because Mom just called me in for dinner", and "It says to take the bumper off, but I'm not going to do that."!
Nicely done. Yea tire prices are just nuts. I bought 4 new continental tires for my f150. So expensive and then they ride worse than the oem worn out hancooks that came on it.
Great video ! I have the 2000 F250 7.3 and I replaced my rear springs about 4 months ago with Dorman springs . Huge pain with removing one bolt on each side but otherwise not to bad . My shackles were rusted but and didn’t move so replaced everything . Seems like a better ride and now going to replace my front springs . I only have 2 leaf springs in the front where it looks like you have 5 leaf springs .
Question how can you fix that steering problem I see it on all fords the steering wheel looks really loose even though you get an alignment steering wheel always look like if the car is not aligned .
Porqué todas las camionetas se ven lujosas por fuera y con gran tecnología por dentro, pero el chasis no tiene ningún revestimiento protector contra el óxido? Los accesorios tampoco y los bulones y tornillos menos aún? Será que el comprador mira solo la apariencia y nunca la calidad? O será que la idea de los fabricantes se basa en la palabra "DESCARTABLE"⁉️
Andrew, I really enjoy your channel. You are very smart and talented and you do great work. Just one small suggestion: listen to your dad. He said at one point during the video that you really needed to have your safety glasses on. I totally agree. I was a machinist for over 40 years and I have seen many eye injuries in that period of time and 99% of them could have been avoided if only the person would have taken a few seconds and put on eye protection. I was one of those people myself and it only took once to convince me that my eye sight could be taken away in a split second. So listen to Pops and wear your safety glasses. Keep up the good work and I`ll see you on the next one.
Another nice job big daddy check those front U-bolt after a while. If the instructions didn’t tell you, they stretch.
Great job. You are really tackling some big jobs. It's obvious you did your homework and were prepared. And just think how much easier these will be when you do them in a proper shop with a lift as opposed to your driveway! Best lines of the video: "I'm going to take a break because Mom just called me in for dinner", and "It says to take the bumper off, but I'm not going to do that."!
Good vid! Remember to tighten those lugs in a star pattern.
good job young man trucks always need something but the springs was a good call
Good idea coating that frame, since we live in the rust belt.
Big 👍🏻. New subscriber from Arkansas. Awsome channel 👍🏻💛👍🏻🇺🇸
thanks
To repeat some very smart advice, "put on your safety glasses!!!" My seeing eye dog typed this comment for me!
Always enjoy your content
Absolute stunning, i wish i had your skills and motivation !
dont be afraid making longer videos andrew
How's the search going for a new box to replace the rusted out one?
Nicely done. Yea tire prices are just nuts. I bought 4 new continental tires for my f150. So expensive and then they ride worse than the oem worn out hancooks that came on it.
👍👍👌👌 Thanks for the video.
Great work on a tough job. What size tires did you have to buy? Thanks.
Nice job, just curious what brand of shocks did you use ?
Rough country. They came as a kit with the leaf springs. I have ones for the rear but have not put them on yet.
Great video ! I have the 2000 F250 7.3 and I replaced my rear springs about 4 months ago with Dorman springs . Huge pain with removing one bolt on each side but otherwise not to bad . My shackles were rusted but and didn’t move so replaced everything . Seems like a better ride and now going to replace my front springs . I only have 2 leaf springs in the front where it looks like you have 5 leaf springs .
Question how can you fix that steering problem I see it on all fords the steering wheel looks really loose even though you get an alignment steering wheel always look like if the car is not aligned .
👍👍👍👍👍🙏
what front springs did you use, are they the rough country leveling springs?
Porqué todas las camionetas se ven lujosas por fuera y con gran tecnología por dentro, pero el chasis no tiene ningún revestimiento protector contra el óxido?
Los accesorios tampoco y los bulones y tornillos menos aún?
Será que el comprador mira solo la apariencia y nunca la calidad?
O será que la idea de los fabricantes se basa en la palabra "DESCARTABLE"⁉️
I think she needs a flatbed now
Those rough country shocks are junk. Shouldve bought Monroe or billstien’s
I bet it drives 1000% better with that lumpy tire off there.🤣