thanks for this display of FREEDOM and Machine Power !!!!good stuff mang is this where they filmed children of the corn part 12 and a half lol imagine if they made traild in them feilds
I'm starting a mini bike build with the HF 670 v-tin (22hp), which torque converter did you end up with for the build & is it working without burning belts?
@@crazybuilder1412 Do you know of a better setup for the primary drive & torque converter? I could run a clutch to a jackshaft, but I would prefer the TC for smoothness & acceleration. Have you looked into the golf cart stuff that's out there, since the carts are heavier than a bike & might hold up better? Really enjoy your video, but the belts sound like a weak link in a TC setup for more than 20hp.
The governor is disconnected so Matthew is right, but I just don't want to gear the bike up any more than it is because it already does 55 and the bike is not made for that, nor are the tires. So the engine can definitely blow if I hold it wide open at full speed for more than a few seconds.
Iv seem several videos of this I'd love to see some dig races with u and a stockish 212 bike and small rider that thing freight trains at a low speed what's the top speed
It can do 55 but it pulls hard all the way there ( needs higher gearing but the bike can't handle that speed). Also it will do that in less than 2 seconds.
First time seeing a Vanguard V-Twin on a Warrior and you NAILED IT!! Those engines run so smooth. Isn’t that a vertical shaft engine turned on it’s side?.
blew the doors off of that 30 mph sign,
Man I love this bike great job bud
Thanks
thanks for this display of FREEDOM and Machine Power !!!!good stuff mang is this where they filmed children of the corn part 12 and a half lol imagine if they made traild in them feilds
Nice cruise!
I think its freaking sweet
That's a beast!
That it is and it's still not done!
That is sooo damn fast!! Lol and I think my mini bike is fast 🤣🤦🏼♂️
Looks good...Could extend the front out a little.
love the build brother
Thanks
A vanguard really ok
At this point that is just a full bike... XD
Just exactly what I want to do with one.
V twin gang choppin
Just needs a swingarm and shocks on rear
As far as a color goes
Electric blue
I'm starting a mini bike build with the HF 670 v-tin (22hp), which torque converter did you end up with for the build & is it working without burning belts?
I bought the blast led 18hp torque converter and No it definitely eats them when it's not blowing up the primary clutch.
@@crazybuilder1412 Do you know of a better setup for the primary drive & torque converter? I could run a clutch to a jackshaft, but I would prefer the TC for smoothness & acceleration. Have you looked into the golf cart stuff that's out there, since the carts are heavier than a bike & might hold up better? Really enjoy your video, but the belts sound like a weak link in a TC setup for more than 20hp.
I think that a golf cart torque converter is too big space wise and for the bike. It would just look bad hanging off the side.
Sounds cool but seems to be slow need to do some sprocket changes or something your going to blow that motor up
I know I'm doing 55 mph in the video
These engines are meant to run on the governor for hours on end. So as long as the governor is in the chances of blowing it up are slim.
The governor is disconnected so Matthew is right, but I just don't want to gear the bike up any more than it is because it already does 55 and the bike is not made for that, nor are the tires. So the engine can definitely blow if I hold it wide open at full speed for more than a few seconds.
What’s the top speed? Looks good
It can currently do 55mph
Iv seem several videos of this I'd love to see some dig races with u and a stockish 212 bike and small rider that thing freight trains at a low speed what's the top speed
It can do 55 but it pulls hard all the way there ( needs higher gearing but the bike can't handle that speed). Also it will do that in less than 2 seconds.
Nice
nice rx7
Thanks I still have it too.
@Whoop!
First time seeing a Vanguard V-Twin on a Warrior and you NAILED IT!! Those engines run so smooth. Isn’t that a vertical shaft engine turned on it’s side?.
No, this is a factory horizontal shaft engine. And thanks.
you cant turn a vertical engine to the side, youd hydrolock
It wouldn't hydrolock it's more of it wouldn't get oil pressure unless you changed the oil pickup and it would be extremely hard to mount
@@CrazyForCooCooPuffs yes you can. Plenty of videos on how to do it. I have an old Briggs motor on its side.
@@CrazyForCooCooPuffs yes you can
how long does the belt last
I haven't had to replace it yet so not sure but it doesn't seem to be too worn yet
Top speed ?
55mph
@@crazybuilder1412 😬😬😅
Whats the top speed???
55
That's for sure 14mph
It does 55mph
Cámara shot sucks bruh
I know. I recently bought a go pro 9.
Nice