Harley ShovelHead Clutch adjustment

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ส.ค. 2024

ความคิดเห็น • 14

  • @christopheryeagley2467
    @christopheryeagley2467 6 ปีที่แล้ว +14

    4 speed segment starts at the 5:50 mark.

  • @Maver1ck12
    @Maver1ck12 6 ปีที่แล้ว +3

    Excellent video! Adjustment made easy. Thanks for sharing!

  • @track1219
    @track1219 3 ปีที่แล้ว +1

    Good video! Turned out I didn’t have play at the clutch arm ( checked on the right side). Last year I had crunchy shifts ( the plates were clinging together from gunky oil residue). After cleaning plates and adjusting as you demonstrated the clutch works great!

  • @darrellmassengale1414
    @darrellmassengale1414 4 ปีที่แล้ว

    Thanks. I've learned a lot today! Thought I needed to replace my clutches, but more likely throw out / oil slinger is problem.

  • @GrigoriMalikim
    @GrigoriMalikim 4 ปีที่แล้ว +2

    Dude, you do know that when you used the socket to tighten the adjuster nut, the adjuster screw also tightened as well. Look at the adjuster screw slot @3:57, then look at the adjuster screw slot @4:10. When adjusting a clutch that is a significant difference.

  • @BrunoVesterMadsen
    @BrunoVesterMadsen 5 ปีที่แล้ว +7

    hmm on 4 speed shouldn't the clutch arm also be adjusted? I believe the manual say something about 13/16in between clutch arm and top og gearbox.

    • @braysanborn6000
      @braysanborn6000 5 ปีที่แล้ว +3

      I use a old 13-16 sparkplug to set the measure on the arm vs trans .

  • @yoshit9819
    @yoshit9819 3 ปีที่แล้ว

    Awesome. Thanks for posting

  • @dennisgrubbs1929
    @dennisgrubbs1929 3 ปีที่แล้ว

    Nice vid - Thank you

  • @josephchaney6457
    @josephchaney6457 7 ปีที่แล้ว +1

    thank you!

  • @steveallenallen3725
    @steveallenallen3725 8 หลายเดือนก่อน

    at least on the 4 speed you should say disconnect the ground

  • @jaybourbon8608
    @jaybourbon8608 5 ปีที่แล้ว

    What is the adjustment on the springs itself? The 3 surrounding nuts. How far should they be tightened? My clutch springs feel weak. Need to know how far to bring those nuts in to get a stronger grab.

    • @jaybourbon8608
      @jaybourbon8608 5 ปีที่แล้ว

      @MILO BROWN Appreciate the response man. I'm gonna measure where I have them set to when I get some time. Did have the disc's out recently to inspect everything, and they looked ok. I think the springs are old and worn. Probably gonna just replace them first.