As a decorator for 25+ years what you did there was absolutely spot on to what I do for a stripped wall. Customers are amazed to what can be achieved without a full re-plaster or applying lining paper!
This is the only video I could find that shows directly what to do, why and how to do it. Not too much talk and straight to the point! You're awesome! 💯👏👏
Ah this is so helpful as we prep to paint after removing wallpaper! Thank you so much for sharing! Out of curiosity - why do you apply the second fill after the base coat?
I’m glad I came across your video and paid particularly close attention to your statement of progress not perfection. I have an older home in need of a modern renovation and even with me breaking down everything to the lowest common denominator, doing a room or even a portion of a room in a set amount of time, I’ve made no progress. I’m disappointed in myself in that aspect at this point. I know it will be no cake walk. Learning and executing home improvement is a language in and of itself. But I would really want to show the before and after Or accomplishment of something cosmetic with this house no matter the size of the project. Having to go elsewhere to entertain company is getting expensive and old.
Hi, also we have busy life's aswell, and projects can be overwhelming. If you can, pick a project like a little bedroom then dedicate 1 hour a day towards doing room. but the trick is to do that hour a day, with time the hours soon compound or even if you are doing research on how to do tasks, that still counts as work towardsthe project, if i can give you any tips just message me on here.
@@Inexteriors thanks I started peeling and stripping a bedroom of old layered on wallpaper. Short term goal being prepping the rooms not in use for paint, painting and finishing those rooms, then prepping and painting the remaining bedroom I was using. I will they redo the floors and bathroom for upstairs working my downwards until I can refinish the basement. I’m not piling too much work at a time and Ian using 45 minutes to an hours to make progress. I’ll gladly and humbling send u a before and after in 30 days👍🏿
Peeling wall paper and where the wall paper has been peeled in certain areas it has peeled down to cardboard. It makes wall not very smooth do I use filler in uneven areas ?
Is it advisable to clean the walls before painting to get rid of any wallpaper plaster residue and do I need to take any additional steps to remove wallpaper that's been painted over?
I give the walls a good sand down when dry the next day, never had a problem with paste residue. you can wash walls if needed or paint in zinsser guardz if you do have any problems. this video might help with wallpaper stripping th-cam.com/video/TwWg1F4FLMM/w-d-xo.html
I tried this painted the wall with Leyland contractors brilliant white emulsion paint but it just isn't covering well would a need a base coat like a primer . Some bits where I filles has been pulled off by the paint
Give it another 2 coats and it should look something like. Not to sure about filler problem maybe you are try to push to hard on the roller, the moment you feel you are putting to much pressure on the roller, that is a sign to load the roller back up.
@Inexteriors ok I will do this thanks for the advice , I'm on my second coat already . The rooms have been rewired chases filled with bonding and easy fill. Rubbed down . Your videos have helped I like the review videos of the zinnser paint was thinking of getting this if there still alot of peeling
Quick question - are you supposed to do a second base coat in white on after refilling the areas with Easy fill? I would have thought the easy fill would bleed through the top coat. Thanks
Wow, really informative, thank you! One question, should the first coat of paint be watered down as I' ve heared this advice from a friend? Basically he suggested to get the cheapest paint and water it down 50/50 to create a base coat. But I've never heard this anywhere else.
Hi mate, any suggestions on filling large holes? I’m using easifill and it’s shrinking and not setting, any suggestions? Should I take it all out and do it again? Or use toupret maybe
Great video but I have a few questions... If some of the wall had lots od bare plaster, some of it had paint, what would you do to the bare plaster areas? Are you supposed to mist coat just those areas? are you supposed to do anything else?
Hi great video mate. Just wanted to ask. You didn't mention anything about removing the glue leftover after wallpaper removal. What's the best way of doing that?
Thankyou very much,all ii have done is give the walls a good sand the day after being stripped, that has worked for the last 25 years, if there was a problem i would put a coat of zinsser guardz on.
Steven, I wish I could fill like you, you make it look easy!! If you know your hole needs 2 fills do you still go ahead and paint wall first or can you fill straight away after the 1st fill is dry? Do you need to seal the 1st fill? Also is your coat paint of white like a primer, is it diluted? Thank you so much, Im learning so much from you.
In having a terrible time one of the walls had wallpaper after I stripped it I sanded and painted white but it’s been so patchy I think the glue was still there 😰
Hi great video 👍🏾 Would you recommend giving a white base coat first even if painting the wall a different colour? Or would you base coat it with the different colour instead. Thank you!
Hi great vid! really perfect for what I need, quick question tho, do you use/recommend 230mm or 280mm caulking board? Or does it not really matter what size....? Thanks 😊👍
Hiya! Glad to have stumbled upon your channel! I have just purchased my first home and have found myself with problem walls that were hidden behind frames and bulky furniture. What would you recommend for uneven walls? It looks like the previous owner gave up halfway during wallpaper removal and simply painted over everything. I have taken off the flaking/blistered parts of the paint/wallpaper and have no clue what would be the best approach in terms of leveling the walls before repainting. I have filled all the holes from screws but I can't bare to paint the walls as they are.. Any advise would be much appreciated! Thank you very much 😊
Hi Steven, I spend hours watching lots of videos recently, all I can say is that I’m a bit confused now, 1. First of all I have to remove the wallpaper, more likely I will use a steamer 2. Sand down and dust off the wall 3. in some of the video people using sugar soap to clean the wall, or recently I watched a video where he’s using ZINSSER prime sealer, and after that 2 layers of skim coat the whole room. Do I have to skim coat the whole room or just sort it out locally where necessary?
This is a phenomenal video, really raising my confidence now, that every wall can be fixed. I really hate when people go: reskim reskim. TH-cam is full of all those easy do this and that videos that never teach you anything about real life work. This is world class. Thanks a lot and all the best!
As a decorator for 25+ years what you did there was absolutely spot on to what I do for a stripped wall. Customers are amazed to what can be achieved without a full re-plaster or applying lining paper!
Thankyou very much my fellow decorator, much appreciated.
This is exactly what I'll be doing over next few weeks, having never done it before, so great timing. Thanks.
Thankyou for watching. Let me know how you get on.
This is the only video I could find that shows directly what to do, why and how to do it. Not too much talk and straight to the point! You're awesome! 💯👏👏
Thankyou very much for watching.
I absolutely love your attitude towards progress over perfection. You highlighting this in your videos has completely changed my approach to DIY 😊
Thankyou very much, and thankyou for watching.
The perfect video for my upcoming project! Great video
Thankyou very much, Good luck with your project.
Thanks Stephen - very helpful mate. Keep up the good work - Cheers
Thankyou for watching.
Ah this is so helpful as we prep to paint after removing wallpaper! Thank you so much for sharing! Out of curiosity - why do you apply the second fill after the base coat?
It just highlights ereas that you may not of seen before.
I’m glad I came across your video and paid particularly close attention to your statement of progress not perfection. I have an older home in need of a modern renovation and even with me breaking down everything to the lowest common denominator, doing a room or even a portion of a room in a set amount of time, I’ve made no progress. I’m disappointed in myself in that aspect at this point.
I know it will be no cake walk. Learning and executing home improvement is a language in and of itself. But I would really want to show the before and after Or accomplishment of something cosmetic with this house no matter the size of the project. Having to go elsewhere to entertain company is getting expensive and old.
Hi, also we have busy life's aswell, and projects can be overwhelming. If you can, pick a project like a little bedroom then dedicate 1 hour a day towards doing room. but the trick is to do that hour a day, with time the hours soon compound or even if you are doing research on how to do tasks, that still counts as work towardsthe project, if i can give you any tips just message me on here.
@@Inexteriors thanks I started peeling and stripping a bedroom of old layered on wallpaper. Short term goal being prepping the rooms not in use for paint, painting and finishing those rooms, then prepping and painting the remaining bedroom I was using.
I will they redo the floors and bathroom for upstairs working my downwards until I can refinish the basement. I’m not piling too much work at a time and Ian using 45 minutes to an hours to make progress. I’ll gladly and humbling send u a before and after in 30 days👍🏿
@@bla9ckcob5ra please do send me before and after all the best.
Excellent, informative video, from a retired “Spark” and amateur decorator-👏👏
Thankyou very much my freind.
Great and important video. It really helped me for my wall painting
Thankyou for watching.
Top job 😃😃
Thankyou very much bud.
You could use a pole sander or even a dust free sander with vacuum dust extractor
I have a new sander now lol.
Great video!
Thank you very much.
Love your videos mate, really helpful 👍
Thankyou very much for watching bud.
Peeling wall paper and where the wall paper has been peeled in certain areas it has peeled down to cardboard. It makes wall not very smooth do I use filler in uneven areas ?
Yes fill cleanly so you dont have very little sanding,
Hey Steven, thank you for creating these videos. What brush are you using to cut in please?
Thankyou for watching, there is a link in the description my freind, it is a purdy 3inch.
Is it advisable to clean the walls before painting to get rid of any wallpaper plaster residue and do I need to take any additional steps to remove wallpaper that's been painted over?
I give the walls a good sand down when dry the next day, never had a problem with paste residue. you can wash walls if needed or paint in zinsser guardz if you do have any problems. this video might help with wallpaper stripping th-cam.com/video/TwWg1F4FLMM/w-d-xo.html
I tried this painted the wall with Leyland contractors brilliant white emulsion paint but it just isn't covering well would a need a base coat like a primer . Some bits where I filles has been pulled off by the paint
What paint are you using as a finish.
@Inexteriors was going to use that same.paint as a finish Leyland brilliant white emulsion
Give it another 2 coats and it should look something like. Not to sure about filler problem maybe you are try to push to hard on the roller, the moment you feel you are putting to much pressure on the roller, that is a sign to load the roller back up.
@Inexteriors ok I will do this thanks for the advice , I'm on my second coat already . The rooms have been rewired chases filled with bonding and easy fill. Rubbed down . Your videos have helped I like the review videos of the zinnser paint was thinking of getting this if there still alot of peeling
The zinsser peelstop is good stuff, thankyou for watching much appreciated.
Great video. I’ve stripped off the wallpaper and there is paint underneath. Do I have to scrape the paint off or just sand the wall. Thank you.
Yes sand the wall, then assess the situation.
@@Inexteriorsthank you for your reply. Best wishes.
Good luck with your task.@@LewisPsychology
What do you use to fill ?
Great videos @
Thankyou very much, easifill 60 is the filler.
Quick question - are you supposed to do a second base coat in white on after refilling the areas with Easy fill? I would have thought the easy fill would bleed through the top coat. Thanks
If there are filled bits after the 2nd coat/ 1 coat of colour, then spot them bits up before final coat, then the filler won't bleed through
Hood job bro. Keep it up
Cheers buddy.
Great stuff Steven did you scrub off the paste
Just sanded it the next day, there was no residue.
Wow, really informative, thank you!
One question, should the first coat of paint be watered down as I' ve heared this advice from a friend? Basically he suggested to get the cheapest paint and water it down 50/50 to create a base coat. But I've never heard this anywhere else.
it depends how much plaster is showing.
Was your base coat watered down mate?
No mate, i would of If it was a full newly plastered wall
Brilliant! Thanks for this. Very instructive!
Thankyou for watching.
Is it okay to use filler over bare patches of plaster as you did here?
Yes, the easifill is fine for that.
Did you fill with lime plaster?
No with easi fill
Hi mate, any suggestions on filling large holes? I’m using easifill and it’s shrinking and not setting, any suggestions? Should I take it all out and do it again? Or use toupret maybe
This should help th-cam.com/video/NihWY2pommM/w-d-xo.html
Great video but I have a few questions... If some of the wall had lots od bare plaster, some of it had paint, what would you do to the bare plaster areas? Are you supposed to mist coat just those areas? are you supposed to do anything else?
You can put a mist coat on the bare plastered erea.
@@Inexteriors Thank you for your help!
Hi great video mate. Just wanted to ask. You didn't mention anything about removing the glue leftover after wallpaper removal. What's the best way of doing that?
Thankyou very much,all ii have done is give the walls a good sand the day after being stripped, that has worked for the last 25 years, if there was a problem i would put a coat of zinsser guardz on.
I'm going to be doing this soon and I just want to know what does "fill cleanly" mean?
This video will help my freind. let me know how you get on with your project.
th-cam.com/video/rwn8omj7Viw/w-d-xo.html
Can you also plaster after removing wallpaper
Yes, you can skim the wall, check out some plastering channels to see how its done.
Steven, I wish I could fill like you, you make it look easy!! If you know your hole needs 2 fills do you still go ahead and paint wall first or can you fill straight away after the 1st fill is dry? Do you need to seal the 1st fill? Also is your coat paint of white like a primer, is it diluted? Thank you so much, Im learning so much from you.
You can fill it a 2nd time if you like, the first coat of white is not waterd down, it would be if it was bare plaster.
Thankyou Steven
Thank you
Thankyou for watching
Hello, great video! one question please.. Are you using a primer white paint or it can just be any white paint as a base coat? cheers!
Its just a white matt emulsion.
In having a terrible time one of the walls had wallpaper after I stripped it I sanded and painted white but it’s been so patchy I think the glue was still there 😰
OK. Give it a light sand, then give it a couple of coats of zinsser guardz, then paint again. Let me know how you get on.
Is your coat of paint a mist coat or do you prep it with undiluted emulsion?
You mist coat new plaster, i just coated it up in white first just to get a base to work of.
Top man 👍 what white paint do you use, Matt or vinyl Matt ?
Sorry for late reply, i mostly use vinyl matt, thankyou for watching the video.
Got the information I needed from you. Thank you
I am pleased the video helped. Thankyou for watching.
How do i know whether the wall behind the wallpaper is Limes plaster (use 60 grit or else 80 gritt)
FYI - DIY 1950's house
cheers
Dig out a tiny bit, you will then see.
Hi great video 👍🏾 Would you recommend giving a white base coat first even if painting the wall a different colour? Or would you base coat it with the different colour instead. Thank you!
You can base coat it in the colour you are painting it if you want.
Hi great vid! really perfect for what I need, quick question tho, do you use/recommend 230mm or 280mm caulking board? Or does it not really matter what size....? Thanks 😊👍
Thankyou very much i use the 230mm.
_progress over perfection_ , that's a good one. Far too often I take too much time trying to get things right, much to the annoyance of the Mrs.
lol, perfection just does not exist, all we can do is our best and it will be ok.
Hiya! Glad to have stumbled upon your channel!
I have just purchased my first home and have found myself with problem walls that were hidden behind frames and bulky furniture.
What would you recommend for uneven walls? It looks like the previous owner gave up halfway during wallpaper removal and simply painted over everything. I have taken off the flaking/blistered parts of the paint/wallpaper and have no clue what would be the best approach in terms of leveling the walls before repainting. I have filled all the holes from screws but I can't bare to paint the walls as they are..
Any advise would be much appreciated! Thank you very much 😊
th-cam.com/video/rwn8omj7Viw/w-d-xo.html
This prep talk through might help, it explains the procces. if you need more help let me know.
Hi Steven, I spend hours watching lots of videos recently, all I can say is that I’m a bit confused now,
1. First of all I have to remove the wallpaper, more likely I will use a steamer
2. Sand down and dust off the wall
3. in some of the video people using sugar soap to clean the wall, or recently I watched a video where he’s using ZINSSER prime sealer, and after that 2 layers of skim coat the whole room.
Do I have to skim coat the whole room or just sort it out locally where necessary?
Remove the wallpaper first, then message me again. All the best.
@@Inexteriors thank you for your message, keep in touch
Hi Steven, I just started stripping off the wallpaper, unfortunately I don’t have plasterboard underneath, what should I do in this case?
@@VladymirSL strip all the paper of all the walls, then see what condition the walls are in.
@@Inexteriors not to bad to be fair, few cracks now and again
Do you spot prime? And when should I spot prime if you do?
once you have your first coat on then filled, maybe 2nd fill were needed, then touch up filler with emulsion, then 2nd coat.
@@Inexteriors so I should fill once or twice before painting? Then spot prime if I’ve filled over first coat of paint?
@@AlfGuitar Fill what you can see the spot it up.
@@Inexteriors can I spot prime the filler before I apply first coat? After I’ve sanded and dusted etc?
@@AlfGuitar coat up the full wall, then fill again if need, then spot up, then top coat.
Whats lime plaster? Your video is great. Thank you for recording it.
Thankyou very much. I am not an expert on it, the used it years ago. Before plaster as we know it today.
yep this is how YT videos should be going forward. ⬆️⬆️⬆️⬆️⬆️⬆️⬆️⬆️⬆️⬆️⬆️ Up up up
Thankyou very much.
This is a phenomenal video, really raising my confidence now, that every wall can be fixed. I really hate when people go: reskim reskim. TH-cam is full of all those easy do this and that videos that never teach you anything about real life work. This is world class. Thanks a lot and all the best!
Wow, what an amazing comment, this very kind of comment also fuels me to keep going. it's a 2 way thing. Thanks again.
Treat yourself to an rts400
Game changer. Obviously not a diy tool but i could not live without one now
I will look into it.
Extend that pole young man or you'll end up with tennis elbow. Nice job.
Will do, Thankyou.