good review and video. Question regarding your monitor arm mount, I noticed it's on the far left side vs in the center. Does this mean it's possible to have two monitor arm mounts, one on each side to have a spaced out dual monitor configuration? How difficult would you say it was to get your monitor arm setup in that area vs the center where the removable panel is?
Thanks for watching. Yes you can put the mounts on either side. Can balance them out, no issues. You just want to make sure you have clearance for the cover panel to close. If you do then all good
@@GeekCulture This Q and A was literally what I needed! Just one more though… Did you need a specific monitor arm to get it to fit on the desk? Cheers mate. This desk just became available in AUS and I want to be on that 99% yes mark! Totally at 95% now haha.
Awesome review , i just bought the desk and finally arrived :) I have a question if you can share which monitor arm you use because it fits and looks nice with the desk . Thank you !
I received the desk (in Singapore) but then I realized that there is no Power Extension Cord included in the bundle when I even bought Cable stealth accessories.
Monitor Mount is from a local company in Singapore Prism +. It’s the Arc Stealth arm Mount. The Mount isn’t magnetic. Need to tighten it on the desk with Allen key
Monitor Mount is from a local company in Singapore Prism +. It’s the Arc Stealth arm Mount. If you're looking for a stand here's one we recommend - amzn.to/3b6Y04l Possibly pricey but so worth it!
Hi, great review. Might purchase this for my son but a little concerned that the depth is a bit less than I was looking at as I’ve bought a Samsung Odyssey G75 32 inch which has a stand with 30cm depth. So I might put the monitor into an arm like in the video - can you let me know which arm is featured in the video and is it compatible with this monitor?
It’s the Prism + Arc Stealth. If you are in Singapore they are a local company, but if you reside elsewhere can see their site and try to match it design wise somewhere online.
Great video! I'm planning to buy this in about half a year. I currently have 2x 1,5M desks next to each other because I have 3 monitors and a collection of Playstations and some other stuff on it so I need the space. This seems like the type of desk I could do the same with. Do you think it's possible to do that without having a gap between them? I'm also wondering about the width. The website says it's 700mm but that's the entire desk. Could you tell me how much it is from the front to the gap? Thanks in advance!
I keen to purchase this desk but secretlab SG cannot delivery to Malaysia, some accessories are also out of stock. I’m really need this desk how can I buy? Not sure how to arrange own delivery from SG to MY
How deep and wide is the bay? I wondering if my power bar will fit and I will be able to plug my stuff haha I have three monitors amongst a million other things
Make that same desk on wheels (with brake!) and with electric / motorized adjustable height, but also wider in breadth / width (in both size long and short versions!) for not sitting too close to the monitor! I would buy that improved table for maximal 300-400€. I will wait for that new wheeled (with brake), electric digital motorized, wider, metal desk (for short and long version) and its yt video! If you don't want to do the motorized height, then at least do the other improvements - wheels (brake) and wider space on desk. But do 3D 360° wheels, not those 2D with movement directions blocking, those suck, if you know what I mean. So more like a ball wheel! By this way, those wheels won't blocking eachother in any movement by its angle directions positions, because since its ball angle is 360° (3D)! Every furniture should get that 360° ball wheel! Cargo holds of e.g. airplanes have had something like this. Perhaps use hard rubber for the ball wheels, like a bouncy / rubber ball, so that the floor won't be scratched. But do yourself a favor and write my name Eugen K. in the first, highest position and with the biggest fonts before and after the video and on the product 360° 3D spherical wheel! Or it will be criminal patentright-thief by you! And then I will make a video where I offer the world-rescue with the condition to make for example the USA government to kill you! So be warned!
I definitely wouldn't be surprised if they made a motorized adjustable height one in the future, that would be way too expensive for consumer and risky to put at launch but after the success of this one they should be fine
Just curious if it’s safe to put a phone or iPad on this table. It’s basically a huge magnetic table and wondering if it may damage my devices. Any thoughts?
Now, since you've been using it a few months, are you still hyped about it ? I'm about to buy it but I have only one last fear => What about the summer heat on that imitation leather MAGPAD ? Great video btw, you are one last step away from selling it to me.
Been using it daily since this. No issues with imitation leather mag pad at all. My only issue I have which I brought up in the review is using large power bricks to charge certain items due to the size of the cable management bay. Definitely there are work arounds though
@@GeekCulture Okay thanks, if it is the only issue, I'm all in. Like you said, you find solutions to adapt. Can't wait for my desk to be delivered on September along with my chair.
Watching your video pulled the trigger! Got mines a few days ago and I’m loving it!
Thanks for watching, and enjoy your Magnus!
A must for a man of culture ^_^ - Thanks for the review, sold me on getting one of these as soon as I can.
Great review, this will be my dream desk to buy in the near future when I buy a home and make one room my gaming/work room 😁
Thanks for watching!
Very helpful review, thanks for posting!
Thanks for watching g
Can not wait to get mine. Went full blown cloud 9 to match my cloud 9 gaming chair
Nice!! Congrats!
@@GeekCulture thanks dude
@@GeekCulture you replied you get a like and a sub
Hi! What is the maximum weight capacity for the monitor mount? How did you install it? Will the desktop be able to hold like 3 monitors?
good review and video. Question regarding your monitor arm mount, I noticed it's on the far left side vs in the center. Does this mean it's possible to have two monitor arm mounts, one on each side to have a spaced out dual monitor configuration? How difficult would you say it was to get your monitor arm setup in that area vs the center where the removable panel is?
Thanks for watching. Yes you can put the mounts on either side. Can balance them out, no issues. You just want to make sure you have clearance for the cover panel to close. If you do then all good
@@GeekCulture which monitor arm do you use?
@@GeekCulture This Q and A was literally what I needed! Just one more though… Did you need a specific monitor arm to get it to fit on the desk? Cheers mate. This desk just became available in AUS and I want to be on that 99% yes mark! Totally at 95% now haha.
What monitor arm are you using mine will not fit.
Good review! Thanks for the video!
Thanks for watching! take care and be safe!
Awesome review , i just bought the desk and finally arrived :) I have a question if you can share which monitor arm you use because it fits and looks nice with the desk . Thank you !
Thanks. This arm is from Omnidesk. It’s called the arc stealth arm
I have it, but I think that it wobble a bit too much... any advise or something I can do for stabilize that ?
I received the desk (in Singapore) but then I realized that there is no Power Extension Cord included in the bundle when I even bought Cable stealth accessories.
Yes this is the thing with the desk I hope Secret Lab addresses. In the promo video it’s not really explained, so we wanted to highlight it here
Just ordered that monitor arm. How’s yours holding up? I was going to put in on my Magnus similar to how yours is
Held up well! Actually no complaints
What monitor arm/clamp are you using? I've heard a few people saying the desk isn't compatible with a lot of standard mounts.
It’s called the arc stealth monitor arm from Omnidesk
Where did you got your monitor mount? and how did you mount it? Is it magnetic to the desk?
Monitor Mount is from a local company in Singapore Prism +. It’s the Arc Stealth arm Mount.
The Mount isn’t magnetic. Need to tighten it on the desk with Allen key
How much clearance do you get inside that cable tray for the monitor mount?
Don’t know the exact measurements but there is ample clearance. They designed it with this also in mind
What monitor arm is that ? Looks really nice
From Omnidesk. It’s the Arc Stealth arm
Anyone running this desk with a g9 ultra wide mounted?? Worried there will not be enough depth for an ultra wide like the g9
h there what monitor arm is that that you have attached to the desk?
Really good review- subscribed!
Thanks!
Thanks Jason!
Would you be able to put a boom mic on the side of it like a RODE psa1?
Only on the front due to the lack of room on the sides to fit in the boom stand clamp
You may have addressed this in a previous video, but what monitor is that?
Hey, which monitor arm are you using?
From Omnidesk. It’s called the arc stealth
what kind of speakers are those? great video btw!
Thanks for watching. They are from Mackie
Couldnt you have angled the large macbook power brick to extend out the hole for the magnetic cover at the rear?
It’s very difficult. Even the new MacBook Pro power brick is tough.
Great review. Thinking of this and the black/white Omega chair. Tell me, what monitor arm is that?
Monitor Mount is from a local company in Singapore Prism +. It’s the Arc Stealth arm Mount.
If you're looking for a stand here's one we recommend - amzn.to/3b6Y04l Possibly pricey but so worth it!
@@GeekCulture Ah. I have a good one but I like that USB hub on yours.
What monitor arm is that? A link would be super helpful!
Prism Arc Stealth arm
Hi, great review. Might purchase this for my son but a little concerned that the depth is a bit less than I was looking at as I’ve bought a Samsung Odyssey G75 32 inch which has a stand with 30cm depth. So I might put the monitor into an arm like in the video - can you let me know which arm is featured in the video and is it compatible with this monitor?
Thanks. The arm in this video is from a local company. Universal Mount so should fit most monitors up to 34 inches
Can't wait for mine to ship out! I like those monitor arms too can you tell me which one was used in the video?
It’s the Prism + Arc Stealth. If you are in Singapore they are a local company, but if you reside elsewhere can see their site and try to match it design wise somewhere online.
@@btonelli appreciate it!
@@soul3lixir If you're looking for a stand here's one we recommend - amzn.to/3b6Y04l Possibly pricey but so worth it!
Only if it was height adjustable then I'm sold.
Agree this would make it even better. Maybe in the future :)
Great video!
I'm planning to buy this in about half a year. I currently have 2x 1,5M desks next to each other because I have 3 monitors and a collection of Playstations and some other stuff on it so I need the space. This seems like the type of desk I could do the same with. Do you think it's possible to do that without having a gap between them?
I'm also wondering about the width. The website says it's 700mm but that's the entire desk. Could you tell me how much it is from the front to the gap?
Thanks in advance!
I assume that's a typo? It's 70cm in total 😁
@@Boskangoeroe my bad on that. Typo. 59cm
Alright perfect. Thank you very much for your answer!
I keen to purchase this desk but secretlab SG cannot delivery to Malaysia, some accessories are also out of stock. I’m really need this desk how can I buy? Not sure how to arrange own delivery from SG to MY
Yes we heard there are some delays on accessories. Yes perhaps need to find a way to deliver to Malaysia from SG.
Is there a compatible keyboard tray for this desk, that you recommend?
Most are compatible. Don’t think there Will be any issues
@@GeekCulture how good or bad is the up to down wobble while typing or gaming?
what monitor mount are you using?
Arc stealth from Omnidesk
@@GeekCulture Thank you!
hi what kind of monitor mount did u use???
It’s called the Arc Stealth from Omnidesk
How deep and wide is the bay? I wondering if my power bar will fit and I will be able to plug my stuff haha I have three monitors amongst a million other things
Power bar will fit but if your using large power bricks like the one that comes from apple for the MacBook Pro it will be a tight fit
@@GeekCulture appreciate the reply man ;)
Why has this not been released in Canada yet
Not sure. I believe once they have ample stock they may open up orders?
Just bought the desk but I think I didn’t order everything. Does it not come with lights or order separate?
It should come with lights
@@GeekCulture I just bought them. Damn
@@deftonesleep1 it’s okay. Contact and ask them
Wish they had more desk lenght options other than 59" only.
Supposedly longer ones are coming soon
@@GeekCulture awesome, thanks !
May I know what desk mount for your monitor ? It looks nice 👍
It’s called the arc stealth and it’s from Omnidesk
@geekculture can I ask what monitor arm you are using. I’m catching h**l trying to find one. Please answer.
It’s called the arc stealth arm from Omnidesk
@@GeekCulture thank you man. Like really. Could this fit In The middle of the desk if you wanted.
Yes can. No issue really
@@GeekCulture thanks bro you really helped out. It’ll be here Tuesday. Lol
Still not in the UK :(
What powerstrip do you have?
Standard one you get from the stores here.
Pls what size is your curved monitor?
34 inch.
when not agains the wall... is it wobbly?
It’s not that wobbly. There will be a bit of movement but it’s not distracting to use
Make that same desk on wheels (with brake!) and with electric / motorized adjustable height, but also wider in breadth / width (in both size long and short versions!) for not sitting too close to the monitor!
I would buy that improved table for maximal 300-400€.
I will wait for that new wheeled (with brake), electric digital motorized, wider, metal desk (for short and long version) and its yt video!
If you don't want to do the motorized height, then at least do the other improvements - wheels (brake) and wider space on desk. But do 3D 360° wheels, not those 2D with movement directions blocking, those suck, if you know what I mean. So more like a ball wheel! By this way, those wheels won't blocking eachother in any movement by its angle directions positions, because since its ball angle is 360° (3D)! Every furniture should get that 360° ball wheel! Cargo holds of e.g. airplanes have had something like this. Perhaps use hard rubber for the ball wheels, like a bouncy / rubber ball, so that the floor won't be scratched.
But do yourself a favor and write my name Eugen K. in the first, highest position and with the biggest fonts before and after the video and on the product 360° 3D spherical wheel! Or it will be criminal patentright-thief by you! And then I will make a video where I offer the world-rescue with the condition to make for example the USA government to kill you! So be warned!
TH-cam damysticalone87
I definitely wouldn't be surprised if they made a motorized adjustable height one in the future, that would be way too expensive for consumer and risky to put at launch but after the success of this one they should be fine
Nice work, just subbed
Thanks for watching and the support!
Just curious if it’s safe to put a phone or iPad on this table. It’s basically a huge magnetic table and wondering if it may damage my devices. Any thoughts?
No issues at all
@@GeekCulture thank you good sir!
This is the way
@@GeekCulture This is the way. 🤙🏼
it's not magnetic... it's metal. large difference.
Now, since you've been using it a few months, are you still hyped about it ?
I'm about to buy it but I have only one last fear => What about the summer heat on that imitation leather MAGPAD ?
Great video btw, you are one last step away from selling it to me.
Been using it daily since this. No issues with imitation leather mag pad at all.
My only issue I have which I brought up in the review is using large power bricks to charge certain items due to the size of the cable management bay. Definitely there are work arounds though
@@GeekCulture Okay thanks, if it is the only issue, I'm all in. Like you said, you find solutions to adapt. Can't wait for my desk to be delivered on September along with my chair.
@@GeekCulture so glad to hear good things, ordering mine this week
what monitor is that
Asus ProArt 34 inch widescreen
Can you mount things on this desk?
Yes but only on the front portion. The back and sides are not designed to have items mounted to them
Do you experience static electric shock from this desk once in awhile ?
None at all. No issues with that
when did bobby tonelli became a tech reviewer?
Been doing it for years :) lots of videos on TH-cam
Where do you put your mug of tea☕?! If you put it on that nice top and knock it over it will go down that power channel✨...oh dear! 😆
Haha no. On the table all is fine
Informative and thorough review, but that music in the background is cancer-inducing.
Thanks for watching. We have addressed the music issue in future videos
Gaming desk designed to be used as a mousepad
Gets reviewed with a trackpad and a mac -.-
(Good review, mind you)
Haha thanks. We like to mix it up
Okay the obvious question,If the desk is easy to put together, Why did you need a guy from secret Lab’s to put it together???
When they delivered the guy also put it together. I’m Singapore they have that service if you are local
"every desk wobbles" now that's not true is it? Why make a metal desk that wobbles??
is it dangerous to constantly have magnets around you? like maybe radiation? I don't know ..
Haven’t grown a third arm yet haha all kidding aside it’s not electromagnetic. Just basic magnets
Magnets don't give off radiation.
Unless you are made of metal I wouldn't worry about it
to bad that they are struggling to manufacture enough
Why review expensive item when most of the people wouldn't buy ?
It’s not expensive though. Also there are people that like seeing expensive items