1,000 Mile MORRVAIR Road Trip Next Week, Will We Be Ready?
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2021
- So the Morrvair is going on a 1,000 mile road trip for the Rubicon rally. Can we get it ready in time?
Big thanks to Trevor at TCTuned
/ tctuned
Subscribe / @mattsoffroadrecovery
Off Road Recovery Videos
Banana Vs Morrvair - Ultimate Off Road Challenge!
• Banana Vs Morrvair - U...
They Said It Was Just A Flat Tire - Ford F-150
• They Said It Was Just ...
Did We Find Our Next Vehicle To Build?
• Did We Find Our Next V...
Holy Smokes This Is Really Steep!
• Holy Smokes This Is Re...
The Corvair Is FINISHED!!!
• The Corvair Is FINISHE...
Are We Really Going To Pull This Dead Jeep Up There?!
• Are We Really Going To...
Jeep Liberty Rollover 100 Miles In The Backcountry
• Jeep Liberty Rollover ...
There's NO WAY you'll recover that truck! (Rescuing a Chevy Silverado)
• There's NO WAY you'll ...
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Get Your Matt’s Off Road Recovery Tumbler Cup Today
mattsoffroadrecovery.com/coll...
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsrecoveryrope.com/
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Shop tools!
Milwaukee 2767-22 Fuel High Torque 1/2" Impact Wrench w/ Friction Ring Kit
amzn.to/2qAiRbY
Tires on yellow banana!
Milestar Patagonia M/T Mud-Terrain Radial Tire - 35X12.50R15 113Q
amzn.to/2O8Yafx
Follow us on Facebook!
/ winder-towing-inc-1029...
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Jeep walk around video
• Walk around my XJ
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery! - ยานยนต์และพาหนะ
![มองหน้ากันไม่ติด (Awkward) - โอ๊ต ปราโมทย์ FEAT. MAIYARAP [Official MV]](http://i.ytimg.com/vi/4b02SY_r6Gw/mqdefault.jpg)
Lizzie's smile when her welding was complimented is only surpassed by Matt's "Lizzie's welding voice" impersonation
Welding with a mig welder is significantly easier than welding with rods...
@@labourlawact7826 agreed stick welding is a ton more difficult
@@o0RageCore0o Yep. I'm ashamed to say that I've never been able to weld good with a stick welder.
@@labourlawact7826 Very true, but I've seen plenty of PLENTY of ugly welds by folks who had even more experience than Lizzy. Suspect her brother was a fine teacher indeed. :-)
Unicorn that’s all I’ve got to say
Knee pads Lizzy.. train your self to wear them now while your still young. . And trust me you will alter the course of your life when your older.. only take a few months of damage to last a life time. Plus it happens without you knowing. . Knee pads will save your health time and money. For when your older. You may not think it now...but wearing knees pads could allow you to work on what you love doing , at least by 10 years or more than you ordinarily would have without them being part of your work attire.. Always ! Wear them even if you don't like the look people may make comments, but you will have a better quality of life over all of them. .. Plus you can slide on knee pads. Making you more effective and efficient... trust me im a 20 plus year mechanic in my field here in NYC.. . Yes I took the time to explain fact. You're welcome.
I`m 72 and had a hip replaced 3 days ago. Worked on cars and trucks. Always tried to cushion my knees with a rag . Caution and prevention is a good plan.
Good advice, both of my knees are screwed and I'm 57, I wear great quality knee pads and they certainly do help, but at the end of a day of doing construction work, they hurt.
@@TokyoCraftsman you need to start doing yoga
I wasn't wearing knee pads when I worked underneath my truck but started wearing them after the pebbles and rocks started hurting my knee. It's worth it wearing them 👍🇺🇸..
I work with an older guy has bad knees and every day I hear him tell someone or just say "protect your knees kid protect yours" as he shuffles around. I only wear pants with the pad pockets to work now.
Lizzie is by far absolutely my favorite. Intelligent,witty,and a hard worker. She makes the show along with Matt and rudy
And she's easy on the eyes lol
Lizzy seems to be a never ending source of talent.
Rumour has it the only thing she struggles with is making an omelette while standing on her head!. She's a star.
Lizzy does not need a grinder and paint, to make her the welder that she ain't. She appears to have natural talent for it.
Lizzie is quickly becoming the star of this channel. She just does everything and I’m pretty sure that belt buckle she wears is for a rough stock championship and not some timed event. There are a ton of people who spend hours in the gym to be as fit as she is and I’m certain she has “real” muscles from doing work and has never been in a gym. Kudos Lizzie, you are a badass - keep doing what you’re doing.
I'm waiting for the reveal that she sneaks into the shop late at night and rebuilds the engines so they run better than Matt and Trevor can manage.
@@kd5nrh Lizzy has a lot of hidden talents which are just starting to surface, and you mite be very right..
I've probably watched over 50 of Matt's videos to this point and I always enjoy the adventure, the camaraderie, and positive attitudes of his whole team. Best of all, in all those videos, I've never heard a single foul word. That's not a big deal for some, but for me it means having great videos that I can enjoy and share with my little ones. Thank you @Matt's Off Road Recovery and keep it up!
The foul words come when the camera is off. They don't want their videos to be demonetized as they are billed as a family friendly channel. Not that I'm complaining, just saying.
@@mrmysterious or, they all grew up in Utah small towns. It really is different when you spend your life surrounded by friends who don't throw out F-bombs every-other word..
Aren’t they Mormon? Lizzie is definitely Mormon. They’re not known for their cussing.
My grandchildren love watching Matt's adventures as much as I do and the best part is that I don't have to worry about the language while our whole family is watching them. Believe it or not, that's very important for some of us!!! Great Job!!!
@@ThePizzaLife
How do you know this?
So Trev comes in to work on his day off, we still haven't heard if he got his Pay Rise Yet
Yeah Matt. Where's his pay raise?
@@beauthomas7285 Trevor probably got told to stand on a piece of paper when he asked for a raise lol.
Trev is being paid through "exposure".
I don't think he needs it...Matt probably pays him well already.
Did Matt get his pay raise
Shoutout to Lizzies brother. He actually took time to teach his little sister something damn useful in life. Cheers from Australia
She's a natural at it by the looks of those welds.
@@stephenhunter70 definitely was taught right to lay beads like that.
Great welding Lizzy for not having done it at all for sometime and being recognized as doing a great job on this job. You are definitely an asset to the team. Yea!!
That shifter boot is definitely gonna be permanent.
Yes! If it doesn't break don't fix it.
Sure it will... right up until it fails. That could be be tomorrow; could be ten years.
It is a TEMPORARY/PERMANENT fix for a permanent problem
Love team lizzie... go Lizzie!!!
Nothing is as permanent as a temporary fix.
Trevor in on his day off - the man deserves his raise
came here for this comment
His face I thought I was getting paid
Y’all are a bunch of cool people. Must say that Lissy is one awesome woman. We need more women like her in this world. Happy Memorial Day to you all. Cheers
You could at least spell her name correctly if you think she is so awesome. It’s not exactly difficult.
If all bosses are like Matt, we will have more people interested in working.
Yeah, with the cameras on....
With the cameras off, Matt's like "You little $%#@ get to work or yer gonna see some pink slips at the end of the day! And don't be whining about not making' minimum wage either! You &*%$# are on call 24/7!" 😂😂😂
@F.B.I What are you talking about?
@F.B.I The FBI has entered the chat
Understand the financial system and then judge. In fact, judge not lest..
I would say this. If there were more people that wanted to work like Matts' crew, there would be more people employed.
Instead of "run Forrest run" we now have "weld Lizzie weld" and she CAN weld GOOD ! Thumbs UP to Lizzie !
Welding is as welding does.
Well good weldin from Liz'zelda Da Welder!, wel-done weld-on......
Weldings like a box of chocolates, you never know what you're gonna make.
"Joe the Plumber" has been surpassed by "Lizzy the Welder"
Lizzy is gonna take Rudy's welding position at the shop. 😂
@@Icless666 hey watch it.
@@Icless666 This is a family friendly channel. Go troll somewhere else. You're not welcome here.
@@Icless666 they’re Mormons
@@jessejames3572 she thiccc 🤤
Stack those dimes Lizzie 🤣🇷🇴🇬🇧👍🏻
Ayyyy I just saw the Morrvair and the whole crew driving up Ice House Road towards the Rubicon literally an hour ago
I was curious if they made it and how it's going. I'm down in Gardnerville and am looking forward to seeing how they did.
Never cease to be amazed by Matt's finely tuned and calibrated "eye-ometer". Every time I try to use that method on my projects disaster strikes and I usually have to start over 🙂
Temporary fix for a permanent problem. 😂 I love this guy!
First he's a counter-weight on a trailer, then he's a shop clamp - no wonder Ed had had enough! ;-)
Being from Nor Cal, I can’t wait to see it on the Rubicon.. Was in Hurricane a month ago and got to see the beast in person. Should be awesome.
Lizzie can do anything. What a lady. There are not enough words to describe her. Awesome, fantastic, beautiful, kind , a good sport and so much more. We all love her. God bless her.
Shop bike, they all got a ride
@@NessieTheCatt highly doubt it.
@@brucedouglas7643 check out her band, glizzy and the love triangle
Her welding and the reactions! Wish I could learn it that fast and be half as good! Wow!
I watch at a retirement home, with of bunch a beautiful ladies.
THEY LOVE IT!
Lizzie has become a welding goddess. Well done Lizzie.
I love watching Matt's off-road recovery because it's all about family and friends. And it's amazing how they love Ed and treat him with the upmost respect. Matt and his family are amazing people I can tell. Great content always. Much love here from New Mexico
Post-flow gas should cover the weld until it stops glowing. So don't immediately pull the gun away. And eyepro always.
Hey Matt, I've got some leftover EPDM from a wine cellar project. I never thought about gluing it together to to make make thicker pieces, what a good idea. I know exactly what I'm going to do with those scraps, thanks for the tip.
Lizzy is stealing the show! What a wonderful, talented young woman.
Big brother thanks for teaching your sister so much useful technology!!
Lizzy is awsome, dancing, trick riding, and perfect welds.
I watched some of the earlier videos again. Didn't realise that Trevor a driver and mechanic - I thought he was a photography/ multimedia guy. Must be a regular McGuyver!
that welding smile Lizzy had was awesome, yous guys have tonns o funn, an be safe... Two thumbs up
You guys might now believe this but it is Monday (memorial day) afternoon and I just came off a weekend on the Rubicon trail in my XJ. When I was headed down Icehouse Rd back towards Hwy50, damn if I didn't see Paul from Fab Rats in his white Toyota, as well as Matt in the MORRVAIR right behind him! I had my arms out the window yelling Matt's name like a crazy person. Super awesome to see ya'll in real life, even if it was only in passing on the road. I should have turned around and caught up with you at Loon Lake for a photo and autograph but we were already so pooped. Really looking forward to footage of the rigs wheeling the Rubicon... Cheers!!!
Skyline did a couple roofs for me a few years ago. They did a great job.
Give Trevor his well deserved and over due raise
18:58 Lizzy. My pop holds all welding tickets except plastic. My uncle Brian was a welding instructor for 30+ years at a BCIT in Vancouver BC, I have been welding about 25 years, and your welds are better than mine.. My hat is off to you.. Mighty fine welding..
Howdy howdy let's get rowdy...... I love Lindsey.... That one girl gives me hope for the future keep it up girl you're awesome and super thanks to Matt for being that kind of Dad
Lizzy and Rudy are the result of excellent parenting
To make ur shifter boot u put it inside out and put it on up side down then u roll the rest back down over so it's right side out ul have a clean look.
Yep.And zip tie it at the height you want it before you roll it back down.
EPDM stands for ethylene propylene diene monomer, which is a bit of a mouthful, so it's commonly shortened to EPDM or EPDM rubber
I can see why basically no one remembers what it stands for now. 😆
edp445????
They can do that sort of thing?
Hmm
Stuff doesn’t last long on roofs.
There is nothing more permanent, than a temporary fix that works.
It’s only temporary unless it works
I love how well you work with the younger kids. You have a knack for explaining and teaching people in a practical way.
Matt's impersonation of Lizzy welding is TH-cam gold.
I taught my daughters to stick weld when they were in high school. Didn't take them long to run better looking beads than I was lol. More women ought to give it a shot, it's fun and depending on what you're into can be a super useful skill.
My daughter at age 16 just picked up a mig welder and took right to it. She looked like she had a years worth of experience. Never had tried it before at all. But she doesn't enjoy it
It's one of those skills that women can be very good at because they tend to be patient and detail-oriented.
woman welded us thru WWII, they also make shit-hot TIG Welders on exotic metals, better finesse and dont have a drinking problem and are less grumpy to the manganese toxicity.
I taught my sister how to put on struts and brakes. She does a good job.
I could but iam accident Prone
That Lizzy is quite a remarkable young lady! She can dance, she can weld, she helps unstuck folks, and always has a smile on her face. And she's cute too. Loved it when her hair was "down". Great work everyone and thanks for videos.
Those beads were amazing. Good job, Lizzy. I mounted a CJ-5 gas tank in my 66 Rambler American today. Funny to watch you do the same.
You have some good genuine people working with you Matt you should be grateful... love the show
I've been welding for 13 years and i would say after seeing her welds. shes better then most guys i know that have been welding for 10+ years lol if she ever leaves the shop she could just show this video and get a nice paying shop job welding and nail the test the first time lol great job
better than mine
Most of the time, pretty handwriting predicts a pretty weld. Better fine motor skills. Not popular (politically) to say, but females have better fine motor skills more often than males.
having welded and seeing that weld as a first weld in years? Wow. If I had to weld again it would probably take at least half an hour or so to get the "pushing the puddle" down just right.
100% correct statement. I've seen ANSI B31.1 (steam pipe) certified welders, leaving welds that looked like coral. She was getting good, clean, full penetration welds, without too much heat, and consistent flow.
@@nunya3163 I have to question her welding in the past. I have never seen anybody pick up a MIG welder and weld like that.
Seeing Matt and Lizzy working on the temporary shifter boot, was the first time in all of these videos that I thought Lizzie was actually teaching Matt how to do something instead of vice versa. Quite entertaining! Haha
Matt cutting aluminum inline with his face with the death wheel... And no shield 😬😬😬
Wait until he loses an eye or has to have eye surgery then he might learn something 🤔
Lizzy is adorable with a welding helmet! Wait, she's adorable without a welding helmet too! Trevor is good at whatever he does - and Matt is the messiest glue spreader! 🤣
You guys have done an Amazing job building, and bringing us along with you on this wonderful dream that you had.
Have a Great time and be safe on your trip.
Another great video by Matt and the crew! Everyone has such a positive attitude and great sense of humor that just a video of them doing some minor mods and problem solving is wonderful to watch. Reminds me of me and my buddies working on our muscle cars in the 80's and just having a great time working on our cars and joking with each other.
Lizzy impressed me with this one. Welding, cutting, measuring, gluing; she did it all better than anyone else I've seen
Roofing business in St. George Utah? Summer work must be like the fires of hell....
Dude, my step son used to install solar power systems in Tuscon.... It's fucking _brutal._
@@slateslavens step dad what are you doing ?
@@bane8305 Lmao
@@bane8305 LOLZ!
I really Love this Channel. Greetings from Los Angeles.
I've just started watching, bought my first Jeep earlier this year and reminiscing back fifty years to my teens, with uncles in the desert of southern California/Mexico. I was learning to drive when that Corvair was driving on the road young. I've been welding since the early seventies and those beads laid down by Lizzie didn't look like "just welding a couple times", very nicely done. Thanks for sharing.
It’s great watching these guys mentor a young person, brothers, uncles, fathers, all being patient and I like that ! She might not know that but it’s Priceless. she takes her time to do things correctly and they all build something together-. I do enjoy watching things get finished from a list
When you do cold air, go with the plastic tube. The pretty shiny chrome ones absorb more engine head which obv puts more heat into the intake air. Cold airs for gm 5.3 are available at most parts places and take 30 min to install.
The welding maniac Lizzy just got me off from slouching in my bed to getting to the basement to fix the water pump. Greetings from Latvia - the land of the fixed water pumps.
BLOUCH
ROTFLMBO!! Matt's impersonation of Lizzy's welding voice was hysterical!! Another create episode! Been watching the channel for several months and still finding segments I haven't watch. Plus I've watched a few more than once!!
OMG Lizzy WELDS? That's a Country Girl for sure! Hope y'all have safe travels!
Lizzy needs a howdy howdy let's get rowdy shirt.
Some people could interpret this the wrong way............(ahem), dont look at me, although I am single. 😂😘
And her own channel.
Shirt? Nu-uh. Tattoo!
I second that.
It’s from a horrid song. “ Everybody raise a longneck
Come on and show your redneck
Let me hear you say howdy
(Howdy)
Let's get rowdy, let's get rowdy
Wait for it, let's get rowdy” it’s the kind of music that 4H kids listen to while they wear western clothes and act like cowboys.
Girl welds like a boss. Job offers coming her way I'm sure!
Maybe the most real thing I have seen on youtube.
A man, holding his hand against his head while holding a hat, looking at a project, and saying "I don't know how this is gonna work." Beautiful. I recognize myself.
Matt and his gang of helpers, I look forward to your newest videos every day. It puts a massive smile on my face when I see y'all have a new video. Please keep them coming. They are some of the very best on TH-cam. We love watching Paul's (Fab Rats) videos as well. All of y'all seem like awesome people and everyone's friend. Please keep posting as much new content as you can, we love it. If I was 30 years younger I'd move to Utah, it looks like a great place to live.
DANG LIZZY!!! Those welds look like my best welds, and my average weld isn’t that clean!🤣
Well that’s an accomplishment. I’ve never been invited behind the desk at my local Napa.
Once you shop there on the regular and know everybody by name it will happen. Makes coming up with solutions to fab jobs a lot easier when you can look through what they have.
Rewatching some of the older videos. I had forgotten about Lizzy's uncle Adam, although I remembered that Matt used to be an owner of Skyline Roofing.
I was amused to see that Matt forgot to change the spark plugs, as he only recently did so!
As fun to watch a second or third time as it was the first!👍
Matt and crew, have a great and safe Rubicon Experience in the MORRVAIR! All of us at the Rubicon Trail Foundation, which is the 5013c that works to ensure the trail is open for motorized use, look forward to the video! We are hosting Brittney and Kevin next month, if you come again we would love to show you around.
Ol' Lizzie can throw down a bead, dismount 40's, AND she carries a pocket knife?!?!?!? She's a keeper!
yeah, Rudy needs to hurry up and put a ring on it.
@@DriveCarToBar ..
,
He said he's not going to weld on the tank because it's full of fuel. Then he welds on the tank haha. Guy cracks me up lol.
Have to watch positive videos this last year. You guys are top shelf.
Lizzie's welding is spot on for someone who hasn't welded much. It takes some practice to become a really good welder.
The Rubicon is one of my favorite memories. Such a beautiful trail. from what I have heard they have broken up some of the more difficult sections...
You messed up Lizzy, now you're going to be the in house welder forever.
If you got to do anything like this in the future get your self some commercial window setting block. It's a roll of 2" wide by 1/8" or 1/4" solid rubber. Works great use it for mounting rads etc.
I've used Joist Protectadeck rubber, for when mounting tool boxes to trailers on an A Frames and on the side of the trailer walls for boxes too. Aluminum and steel don't go well touching and really reduces the noise.
Trevor is truly an underrated member of the team. This guy does everything like I do. Give him a raise Matt! Also that HP laptop was CHUGGING with that software. Get an Asus laptop for Trevor! Or Alienware, he deserves it!
Awesome!! Nice one Lizzy. Having a good Bro to teach you how to weld 10/10. Mat'ts fairy voice on welding, priceless.
Matt you have to let "Smooth-Weld" Lizzie loose more often with the wire welder! Just think how good she will be with some practice.
as a professional welder, this video made me smile.
I know ‘professional’ welders that couldn’t weld like that if their life depended on it! Great job Lizzy !
Goodluck on the trip guys, can’t wait to see the video.
I just really enjoy the lack of drama. No yelling and screaming. No histrionics. No B.S.
Just fun, talented, skillful people doing what they do and taking us along for the ride.
Thanks folks!
Where has Randy been?? He adds a very happy presence
They aren't saying...Lizzy got him fired.
@@outlaw7x77 Seriously?? If thats true Matt can f'off. Adick move to a childhood friend
Randy was fired, without warning, in March, 2021. The reason has not been revealed.
Damn good welder there, looks like promotion time, give the lady a raise lol
Nice job Matt, knockin out the to-do list! Lizzy has such a steady hand with the magic wand. I can hear that mig really cracklin'! Gotta watch the Rubicon video next, tryin to get caught up. Can't wait to get back to Utah and sightsee.👍😎❤️🙏🇺🇸
I seen that you had a successful trip to the Rubicon. You were going East on Hwy 50 on the West side of Robinson Pass. I was going West to one of the gold mines that we service hauling Quick Lime among other things. I was in the Barney Trucking truck with the set of doubles dust bucket trailers. Your Morrvair sure looks great on the Road and when you went by me it sounded great. Great work.
That is one heck of a good weld Lizzy. You are as good as Rudy. I have a question, were is Randy? We miss his laugh.
Matt fired Randy in March, 2021. The reason is a mystery.
I live basically where everyone stops for the Rubicon to get gas and food at a Safeway and it’s funny to know that Matt is up here somewhere driving around.
Good ole Pollock.
@@mattsundby4606 😂👍
Pollock Pines is great town my friend owns a house next to the lake . Last year is the first time i didn't go fishing because of covi rules.....
Is he up here now ? I own a house by the lake also . I will take a day trip to go meet him on the trail. Love Pollock pines
@@joshadams2792 no I was just saying that they all come up here and it’s popular meet up spot
My favorite videos. Problem solving and someone learning something new. Check and check. Good luck on the trip.
I use to live next door to an amazing girl, hands on and doesn't mind dirt. She bought an old FJ47 Troopy to cross Australia in, but before that she travelled she did a Mechanics course and learnt how to weld. I only went across to South Australia in my Troopy. She went all the way and back and then joined the police force. You go Lizzy.
When he said “but we’re gonna do another one because.....” I said symmetry to myself lol and Trevor helped confirm
Matt, put on safety glasses ffs !!!!!
And, where is Randy ??? I miss him.
Randy is one of my favorite people too! I've never laughed so hard as I did at the video of Randy and Lizzy being dragged out in the car that was stolen and destroyed. Matt hooked up to the tireless old heap and dragged it like 8 miles and Randy and Lizzy were laughing so hard. Randy has that infectious laugh that makes you laugh even if you don't know why he's laughing!!! Lol
Randy said he came in one day and was told by Jefe that he’d been let go.
He has his own TH-cam channel now!
Great Video as usual, the morvair keeps getting better, gas up from the outside, bigger tires and a better tune!
Lizzy welding like a boss and Trevor on his day off, Matt you better start eating better and paying more buddy.
Wow, I wish I could be part of your family. Well done and keep the closeness and fun going.
go look at a Dodge Hellcat, they use the AC to cool intake temps
Lizzy is a Great person for our youth to look up too. She easily shows she can do what a guy can. Giving our young ladies confidence coming into the mechanic/fabrication fields. We need more Women, and young Peple in general in these fields. You Rock Lizzy!
Just saw you guys pass me in Tahoe City! Welcome to California!
Nothing to speak of recovering, but satisfying. Love your community of associates, friends and relatives.
Bring Randy Back! We miss his laughter and chipper attitude
What happens to him?
Where did he go?
@@codygrooms3127 not sure. he hasn't been in the latest videos. Somebody in the comments mentioned that he was no longer part of the team, but I don't know if thats true.
@@brownbear0146 It's true. He was fired in march. I've talked to him through FB Messenger.
@@bryco32 fired for what? Or did he just move on to something new?
What an amazing crew! Lizzy, everyone is loving on you, but you’ve earned it. 👍🏻👍🏻
Almost to 1 million Matt. Great job guys. You ALL are awesome peeps. Keep up the good work. Next time I go visit Zion or even just Utah again I'm going to get me one of those shirts. Ya I could order one but those ones arent authentic. Lol
Ah NAPA. The one in Hurricane had everything but a left handed 6mm drill. We arrived on two KLR's with a total of one headlight beam, three good tubes, and a rear subframe held on with a cam lock tie down strap. It has been a great week on the kaibab. And they got us out!