For safety reasons. Always use a jack stand and guide the subs along the process of the installation. Like what side of the spring to cut, what you will need for the job, etc. But great video. Plain and simple
He who has the big balls necessary to pull this one off don't need any axle stands. And the video was very visually informative, a commentary was not necessary. I really liked this video.
There is actually people asking if you only need to do it on one wheel How fucking slow do you have to be to think that? Like its a legit question how slow do you think. Do you think loading on 1 wheel will make the other 3 automatically be cut?
its easier to 1.jack up the car 2.turn the wheel to te direction your cutting your springs 3.measure where you to cut 4.cut more than half way thruw 5.drop the car 6.jack up the car and with a flat head screw driver put the spring on its perch
You’re actually one of the only ones who has a video of cutting them the right way. Everyone else cuts from the bottom and leaves the strut on there 🤦🏻♂️. Good job bro
What country are you in? I cut the springs on my 65 mustang when I was 18 worked great, and I was glad because I needed the money for a Mallory comp 9000 distributor more than springs lol. Nice video!
@@lowlifejourney397 ok thanks and on more question is I can't get the strut tower out, the strut slips when I try to remove the top bolt can I just cut It on there or any ideas I even used 3 pair of vice grips to hold it from slipping but no luck
it is not safe at all, you want to lower you car? do it right get proper suspension.. proper suspension is for sure going to be just a little more of repairing the damage you have caused because you wanted to be cheap and cut the springs get coil overs which are adjustable if the car is still too high you can adjust it too low its adjustable...love .your car that much don't cheat been building and modifying cars for a long time
This is the longest way ever.. Mate all you do is jack the front get a grinder in there Mark your cut.. Cut the spring but not all the way through just 3/4 once cut drop the jack and the spring will snap and the coil you cut will fall out. Just be careful how many coils you cut I've made the mistake of cutting over half and the sump meeting the tarseal
Stance is not a crime 🔥🔥🔥
For safety reasons. Always use a jack stand and guide the subs along the process of the installation. Like what side of the spring to cut, what you will need for the job, etc. But great video. Plain and simple
Thank will keep that in mind
He who has the big balls necessary to pull this one off don't need any axle stands. And the video was very visually informative, a commentary was not necessary.
I really liked this video.
Guy, you made me smile. And it actually does look pretty cool.
Great video!
There is actually people asking if you only need to do it on one wheel
How fucking slow do you have to be to think that? Like its a legit question how slow do you think. Do you think loading on 1 wheel will make the other 3 automatically be cut?
Stance is not a crime🙌🏽🙌🏽
Nice video
Mzansi‼️
its easier to
1.jack up the car
2.turn the wheel to te direction your cutting your springs
3.measure where you to cut
4.cut more than half way thruw
5.drop the car
6.jack up the car and with a flat head screw driver put the spring on its perch
I was actually considering whether that would be an option.
Cut the springs while in place?
Lol this is so stupid I'm gonna do it to my car hehe...
love the video, please ignore negative comments. title says it all. "By cutting springs"
Yes, thanks
You’re actually one of the only ones who has a video of cutting them the right way. Everyone else cuts from the bottom and leaves the strut on there 🤦🏻♂️. Good job bro
9
Jou cant cut them good if u cut them jou destroy them so use lowering spring ore use liwering clamps ore coilovers
im tempted to do this on my stock 83 280zx. im looking at coilovers for it and most needs welding or cutting and I have no experience in both.
What country are you in? I cut the springs on my 65 mustang when I was 18 worked great, and I was glad because I needed the money for a Mallory comp 9000 distributor more than springs lol. Nice video!
Iam from South Africa
Thanks for Watching Buddy😁
To save the shocks put rebound rubbers on it so it doesn't bottom out.
What are rebound rubbers bro?
You mean bump stops
Yes
Shocks are dead anyway
How’s the ride comfortably and bounce
I have a tazz, I’m thinking of cutting 2 to 3 coils
It’s always best to cut half coil at a time, so you don’t cut too much and go too low. Bet this thing bottomed out on every single bump 😅
The way u explained it in steps and did it right away👌💯💯
The best video I have ever watched on TH-cam 👌🏻👌🏻❤️❤️❤️❤️❤️
Thanks for the love😉
Great video now tomorrow my Lancer is in the low life journey
Now I just need the father's car keys
You first need permission 🙈🤔
🤣🤣🤣🤣 Behave yourself
They’ll kick your ass out 😂😂😂
This is the Ranjid way of lowering a car
Thnx my guy u did help alot im on it now
Nice video!
How do you make the car bounce when its lowared
All the goats be turning heads now boiiiii.
Great video 👏
What's the name of the song playing
Wow this is lovely 💕❤️
Can I drop polo tdi 1.9 like dis
Name of the song please bra🤣🔥🔥
How stiffen it?
Die bra se hemp tucked in. Dankie Meener
It’s only lowered in the front tho?
Speed breaker??
Very helpful
How you measure for 1 inch drop?
I will make another video to show you
WHAT IS THE SONG NAME?
Good job on tha toyota boss do more TRd vids..
Thanks. I will do so
Please make tutorial how to drop a car and let it bounce by pushing the bonet
Do you have to do this on all 4 tyres?
Yes 😁
no you have to cut on spring and all springs will be cutted automatically
@@user-kt6gh5fm7u just tried it there, it worked thank you !
What is the song name
Awesome it’s fun to change the look with out spending any money
Nice!!!
But my car is just a toy how can i do that
Can I drop a polo classic this way
Yess you can
This is so stupid make the handling so bad just glad they did it to a scrapper
that car is fooooooked lol
Ey my man for safety next time loosen the bolts on the Tyre first before jacking it up btt well done Bru looking wet
Very true
among the stupidest ideas to lower a car . . . cutting the coil springs would only mean cutting your safety when driving . . .
How bout heat up the springs with a cutting torch and watch them getting lower instead of cutting springs out
🔥🔥🔥
Do u only have to do it on one wheel
If you want your car to be lowered on that one wheel yeah xD
Really? Smh
Yea other 3 wheels will be done automatically 👍 good luck
are you for real?🤦♂️
Dankie bra nou kan ek my mk1 drop
wo needs springs? -Blue9husky
You lowered your car this way?
There is many ways to lowerd your car . But by Cutting your springs is the cheapest way
And this people is how you mess up your shocks in 1 week....
Yeah thats way its the cheapest way to lower your car
Shocks were already bad. Nothing wrong with a lowered hoopty.
I'm sure the ride really sucks after
Spring rubbers 🤔
This can be illigal
How it ride
That shit gonna bum like a ball bro almost everyone knows that style its gonna let car bum
Dumbest wayto lower your car 👌
Aweeee
The start of the video is wrong already, make the wheel loose first, then turn top nut loose of the strut, save more time and its easier
I'ma do this to my 99 camry
That’s hard
Jou Kar is ncaa
bro cut half of it
Is this safe for daily driver past 120mph if done corrctly?
It depends how many inches you cut your springs. The more you cut, the more it will get bouncy.
@@lowlifejourney397 ok thanks and on more question is I can't get the strut tower out, the strut slips when I try to remove the top bolt can I just cut It on there or any ideas I even used 3 pair of vice grips to hold it from slipping but no luck
You need to remove the top bolt before you take the shock completely off
Send me a WhatsApp 0611044631
it is not safe at all, you want to lower you car? do it right get proper suspension.. proper suspension is for sure going to be just a little more of repairing the damage you have caused because you wanted to be cheap and cut the springs get coil overs which are adjustable if the car is still too high you can adjust it too low its adjustable...love .your car that much don't cheat been building and modifying cars for a long time
Skinny jeans and bump stop life
Song Name PLEASE
mondyliciousmondo “low life -Future”
@@BattledSoulPlays
NO not @ Begining of Video
but Starts @ 25secs throughout the video...?
Haha I'm going to drop My Dad Toyota cressida in the morning
I know that its a struggle to lowered a Cressida infront but send me pics on Facebook when you done
This is the longest way ever.. Mate all you do is jack the front get a grinder in there Mark your cut.. Cut the spring but not all the way through just 3/4 once cut drop the jack and the spring will snap and the coil you cut will fall out. Just be careful how many coils you cut I've made the mistake of cutting over half and the sump meeting the tarseal
LOL
es lo peor que le puedes hacer a un coche, es la combinación perfecta entre pobreza e ignorancia.
No es tu coche de que te preocupa pendejo? 🤡
Para que hacerle el trabajo perfecto si ese coche ya muy apenas sirve miralo como anda 😂
Mi pregunta es que ases a qui mirando el video si piensas asi ? Solo a criticar? O quisas biniste aver si puedes aser eso tu atu carro ?
Don't cut your springs you just need to install coilovers instead.
The title says how to lower it by cutting the spring , not buy adding coilovers
Can't you Read the Title
Ricer
nice way to die
What did I jus watch
Thanks for watching 🤗
Lowering a car,circa 1989!
That is horrible
Spring rubbers 🤔