WLtoys 144001 FULL Brushless CONVERSION ⚡ FULL STEP-BY-STEP!

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2019
  • STEP by STEP - WLtoys 144001 Brushless 3S Success! It’s Done! == PARTS SEE BELOW ==
    WLtoys 144001 Step by Step BRUSHLESS Conversion 3S - Full Explanations
    with Radio Link RC4GS Gyro
    Here's what I bought (but do your own research)!!
    ---------------
    1) Radiolink RC4GS 2.4G 4CH Gyro RC Transmitter with R6FG Receiver for RC Car Boat"
    www.ebay.com/itm/Radiolink-RC...
    2) Brushless Motor 3650 4300 KV w/program card
    www.ebay.com/itm/B3650-4300KV...
    3) Metal Servo - JX Servo PDI-1181MG Digital 17g 3.6 kg Metal Gear RC Model Plane Fixed Wing:
    www.amazon.com/gp/product/B07...
    4) Receiver: Radiolink FHSS R6FG 6CH 2.4GHz Receiver With Integrated Gyro for RC Car Boat ND

ความคิดเห็น • 163

  • @earlmauger3961
    @earlmauger3961 4 ปีที่แล้ว +7

    I very watched this video a couple times cause I'm going brushless with mine, but I never noticed the 250R and the Tri-Z before. That is awesome, had a 250R way back when. Wish I never sold it. They look like they are in great condition too!

  • @stevemdelacruz5602
    @stevemdelacruz5602 3 ปีที่แล้ว +2

    Fantastic job!looks great ive got to have one

  • @Ratboycure
    @Ratboycure 4 ปีที่แล้ว

    We should call it the 206 evolution! Thanks for the update.

  • @NordicRC
    @NordicRC 3 ปีที่แล้ว +1

    Nice ! Amazing you could fit that body on again with all that stuff

  • @tedsimington7654
    @tedsimington7654 ปีที่แล้ว

    Thanks for sharing bro✌️

  • @rctaz990
    @rctaz990 4 ปีที่แล้ว

    Nice video dude. Did have a A959 and a a959b but due to walls and curbs ive had to kond of make one out of the 2 haha

  • @jimcunningham6899
    @jimcunningham6899 3 ปีที่แล้ว +1

    I am a Helicopter Mechanic and we call that Backlash for the gear mesh.

  • @strexttp
    @strexttp 3 ปีที่แล้ว

    Good upgrades 🔥

  • @danielemulazzi7309
    @danielemulazzi7309 4 ปีที่แล้ว

    Bel lavoro!!!

  • @JeepITguy
    @JeepITguy ปีที่แล้ว +1

    Use the Rlaarlo motor mount and you can adjust your mesh

  • @Muldrix1978
    @Muldrix1978 4 ปีที่แล้ว

    Great Upgrade. Wich wltools bodymount kit have you ordered. On aliexpress i see body mounts only for k929 A959, A969. Thats for 1/18, does that fits also on 144001? Thanks for the great video👌👍

  • @vitodambra72
    @vitodambra72 2 ปีที่แล้ว

    How about temp? And gear. Did it handle the motor and did the esc ever get really hot? Great video, like your content😉👍🏼💯

  • @chipsandsalsa2520
    @chipsandsalsa2520 4 ปีที่แล้ว +6

    Hello, speaking of upgrades is it possible to replace the oem wheels with a wheel that features a sealed bearing? If so could you recommend ? Great channel

    • @rs7xsketch336
      @rs7xsketch336 3 ปีที่แล้ว +1

      If the hex nut hole are the same size I think u can

  • @DarkWarriormgc
    @DarkWarriormgc 4 ปีที่แล้ว +3

    What motor mount did u use there? And are the screw holes on the 540 and 550 motor the same dimensions and distance?

  • @gamingis4eva
    @gamingis4eva 4 ปีที่แล้ว +5

    Hi, can i use the pinion gear from the stock motor and put it on a 3.17 mm shaft?

  • @morgenkaffe
    @morgenkaffe 10 หลายเดือนก่อน

    you should consider filming a bit further away, it is like watching a film in full zoom mode :) Great video anyway, but place your phone/camera on a tripod next time :)

  • @ned9344
    @ned9344 4 ปีที่แล้ว +1

    Have you got a link for the spare screws mate, thanks

  • @Topsiekku
    @Topsiekku 9 หลายเดือนก่อน

    That plastic sprocket seems to be the strongest sprocket in the entire drivetrain. The differential sprocket wears out much faster than that unlubricated plastic sprocket. You wouldn't think so, but that's how it is.

  • @glowiever
    @glowiever 3 ปีที่แล้ว

    need to mod the screw holes on that mount. it's difficult but doable

  • @KENTA24477
    @KENTA24477 4 ปีที่แล้ว

    great job, its how i will

    • @neptuned9774
      @neptuned9774 4 ปีที่แล้ว

      Och du allman

    • @neptuned9774
      @neptuned9774 4 ปีที่แล้ว

      "will" heißt werde tuen nicht ich will du Holz

  • @howardcrews9196
    @howardcrews9196 3 ปีที่แล้ว

    Hi Gallons, first time motor kit upgrade. The motor combo is
    a Fooled s2838 4500kv . I know the wires on the motor & ecs
    color coded,but my motor wires are red,yellow & blue. The escape wires are A yellow, B orange & C blue how I match
    them up.

  • @jamiemockridge4713
    @jamiemockridge4713 2 ปีที่แล้ว

    Do you have a link where to get the high pins to make the body fit with all the new wiring & bigger motor?

  • @klausknudsen106
    @klausknudsen106 4 ปีที่แล้ว

    Nice i am trying to do the same upgrade to mine.. The spur gear, you can get the metal gear thats for the A959, its the same, as far i can see. cheers

    • @rcuniversespeed9447
      @rcuniversespeed9447  4 ปีที่แล้ว

      Klaus Knudsen no I think it’s different. But WL toys now makes a metal one.

    • @familyman8644
      @familyman8644 4 ปีที่แล้ว

      Fuck wl toys. Lol joking

  • @linkspyder
    @linkspyder 3 ปีที่แล้ว

    Hi. Hows the esc holding without the fan? Got the same prob with my esc size(height). Thx

  • @leebradley271
    @leebradley271 4 ปีที่แล้ว

    did similar with mine but the brushless motor stutters? you can lift it off the ground and it runs fine, but on the ground it stutters at full throttle and takes a little while before it starts moving

  • @CallMeAdam2023
    @CallMeAdam2023 3 ปีที่แล้ว

    Ive always wondered what the difference is between the B3650,S3650 and BL3650

  • @eskimojoe6564
    @eskimojoe6564 4 ปีที่แล้ว

    Nice video you could of took a hobby knife and cut out a perfect square out of the top of the body for the fan to poke through and that would give you maximum cooling for that hot esc especially on 3s

    • @paulclancy2404
      @paulclancy2404 4 ปีที่แล้ว

      Yep and the bodys hold heat in also so openings help

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว

      @@paulclancy2404 I agree. I wanted to keep that clean look and not scratch up the fan housing when I crash. But agreed.

  • @VallonesRCHobby
    @VallonesRCHobby 4 ปีที่แล้ว

    Any mods to get the new steering servo to fit?

  • @pedorrinjdm
    @pedorrinjdm 4 ปีที่แล้ว

    Oorale nice mod, like

  • @dylanwillyams
    @dylanwillyams 4 ปีที่แล้ว +1

    Doing my brushless setup today but with an lc racing motor mount

    • @bonasa9712
      @bonasa9712 4 ปีที่แล้ว

      Can you rotate/clock the motors case you use in video

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว

      @@bonasa9712 huh? Not sure what you are asking.

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว

      Dylan man that's awesome. I wish i had one of those. WHere did you buy it from?

    • @bonasa9712
      @bonasa9712 4 ปีที่แล้ว

      @@DariusBarazandeh comment for rcworld, but he mentioned he want to read motor label. I was wondering if you can take out the two screws on case of motor and rotate whole case 180*

    • @bonasa9712
      @bonasa9712 4 ปีที่แล้ว

      Love the classic 250r in the background too. Rare little beasts

  • @melv889
    @melv889 ปีที่แล้ว

    Can anybody tell me which Lipo that is? It just fits in perfect
    I'm searching for a slim 3S like that

  • @wilsrecreations450
    @wilsrecreations450 3 ปีที่แล้ว

    Flipping the back arms upside down to make it longer... 😉

  • @agairbrush
    @agairbrush 3 ปีที่แล้ว

    how match minutes do you running with this configuration?

  • @familyman8644
    @familyman8644 4 ปีที่แล้ว

    I subbed and appreciate one back. Hiw long or # of runs you think it will run stock in a blacktop parking lot messing around. I take care of my shit. I know it aint gonna hold up like no platinum slash but hope to get atleast as long as the tires last out of that thing

  • @RichHair
    @RichHair 4 ปีที่แล้ว

    what do you do with the differenzial

  • @yandel11210
    @yandel11210 2 ปีที่แล้ว

    What about that surge Gear? No upgrade to metal?

  • @judo198989
    @judo198989 4 ปีที่แล้ว +1

    Send a new links for the engine and servo

  • @kellypark007
    @kellypark007 3 ปีที่แล้ว

    I'm new to this I went with your same setup I put it on 3s lipo and my ESC start to smoking is there anything I can do to prevent this from happening in the future

    • @user-kp1fw4nf5q
      @user-kp1fw4nf5q 3 ปีที่แล้ว +1

      Try putting a fan on the motor

  • @aguswijaya7091
    @aguswijaya7091 4 ปีที่แล้ว

    Hello, what kind battery and capacity do you use for this esc?
    Thanks if you can help me

    • @jayhow997
      @jayhow997 3 ปีที่แล้ว

      Easy enough to work out . You need to know the highest amount of amps the motor can take which I believe on a 60 amp ESC will be a burst amp of 380amp .
      To work out the battery you need to multiply the amount of mah to the c rating , every 1000mah = 1amp X c rating eg a 30c battery X 1amp = 30 amp , a 60c X 1 = 60 amp .
      2000 mah , 2x60 = 120 .
      2200mah , 2.2x60=124 .
      6000mah , 6x60=360 perfect .
      Same with different c rating batteries. 2000mah with 80c ,2x80=160 so a perfect battery for 380 amps would be 4000mah 80c .
      3500 mah 100c . Always stay below max amp never push higher .

  • @Omarkoman
    @Omarkoman 3 ปีที่แล้ว

    great video but next time pls mount the camera somewhere so its static, it makes me dizzy watching the video moving and wobbling all the time.

  • @nswiss19751
    @nswiss19751 4 ปีที่แล้ว

    What are those wheels and tires?

  • @chrisdelaplante5515
    @chrisdelaplante5515 4 ปีที่แล้ว

    Hi, where did you find the motor mount ? This is the stock one ?

    • @rcmedia9516
      @rcmedia9516 4 ปีที่แล้ว

      Stock motor mount

  • @stonewallsaucedo5613
    @stonewallsaucedo5613 ปีที่แล้ว

    Nevermind I seen you had a new one

  • @fulltimegator
    @fulltimegator 4 ปีที่แล้ว +1

    I can't seem to find the servo you linked. The link ends up with an error. Can you please update the link? Thanks! That's the missing piece for me.

    • @rcmedia9516
      @rcmedia9516 4 ปีที่แล้ว

      JX Servo PDI-1181MG

  • @ucitymetalhead
    @ucitymetalhead 8 หลายเดือนก่อน

    I want to upgrade my 12429 so it can handle at least a 550 brushed motor if not a brushless.

  • @ut90J
    @ut90J 4 ปีที่แล้ว +1

    Can you update the links?

  • @RileyBanksWho
    @RileyBanksWho 3 ปีที่แล้ว

    About to do the same upgrade to mine. What battery do you recommend for longer runs? I've been lookin at ZOP 6000mAh 3s's. I'm really looking for 15 minute(ish) run times on relatively cheap batteries.
    What do you think?

    • @You_no_viking
      @You_no_viking 2 ปีที่แล้ว

      I got a brusless system in mine I get bout a half hour off 2200 3s. A 6000 mah will not fit not even a 2s lol sorry

  • @Tyler-cg4db
    @Tyler-cg4db 2 ปีที่แล้ว

    I have a serious question about the 144001 because I actually had 2 of them and tried to convert one to brushless , failed , I couldn't even get the screws off they got stripped even with a driver that fit them perfectly the Phillips screw heads kept getting stripped preventing me from being able to unscrew them at all ,and I just had to send it back and kept my second one but didn't attempt to take it apart after that happened to the 1st , it's like the screws were pre locktighted , is there a way around this sortof issue?

    • @user-fn7zd8pl7w
      @user-fn7zd8pl7w หลายเดือนก่อน

      Apply heat to the screw with a soldering iron. Let it touch the screw for a few minutes, like two minutes and you’ll be fine. Trust me it works

  • @xangmax9869
    @xangmax9869 2 ปีที่แล้ว

    Can i use the original remode control for the upgrade or have to get new one?

    • @samsulanwar4286
      @samsulanwar4286 ปีที่แล้ว

      no, u must change the stock the remote b'cause has use battery 3s max 6s

  • @TheCooltemp
    @TheCooltemp 2 ปีที่แล้ว

    Hi.. can i hv the link fr ur servo? Thx

  • @johntora1
    @johntora1 4 ปีที่แล้ว

    Where did you buy longer body mounts?

  • @Petrolheadz1
    @Petrolheadz1 2 ปีที่แล้ว

    Did you need to buy the programming card also?

  • @crikdawg
    @crikdawg 3 ปีที่แล้ว

    Can i use the same esc that came with the car with this motor? I'm new to rc and this is my first car. So I have many questions.

    • @javiervaldez7627
      @javiervaldez7627 3 ปีที่แล้ว +3

      you can’t, brushless motors have 3 wire esc, brushed only has 2

    • @crikdawg
      @crikdawg 3 ปีที่แล้ว +1

      @@javiervaldez7627 thanks for answering Sir.

  • @RichHair
    @RichHair 4 ปีที่แล้ว +1

    Its the Stock Servo or a new upgrade servo

  • @barry2673
    @barry2673 4 ปีที่แล้ว

    You definitely need an extra remote control

  • @anthonydefuria9224
    @anthonydefuria9224 4 ปีที่แล้ว +2

    Did you change out the servo with the 5 wires?

  • @familyman8644
    @familyman8644 4 ปีที่แล้ว +3

    How long does it hold up on 3s before a differential blows up or gear stripping?

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว +1

      Well I did strip out my diff. See my other video. But I put bigger tires on it so that might have done it. I just bought the upgraded diff with harder gears. I think its not the 3S but the bigger tires that did it.

    • @TonyBulliard87
      @TonyBulliard87 4 ปีที่แล้ว +1

      Family Man it depends how rough you are on the jumps and throttle bursting

  • @user-qb8kb3or3w
    @user-qb8kb3or3w 4 ปีที่แล้ว

    How much gear T

  • @Omd-vz2gt
    @Omd-vz2gt 3 ปีที่แล้ว +1

    What type of battery was being used for this project? Anybody know?

    • @samsulanwar4286
      @samsulanwar4286 ปีที่แล้ว

      ussually use 3s battery on this vid, but u can upgrade to 6s when u see the ESC

    • @Omd-vz2gt
      @Omd-vz2gt ปีที่แล้ว

      Thank you

  • @vacuumpowered6119
    @vacuumpowered6119 3 ปีที่แล้ว

    Yo, is it possible to use the stock esc but a brushless motor?

    • @Benthedroneguy
      @Benthedroneguy 3 ปีที่แล้ว +1

      No you have to buy a brushless esc and motor. You would also need a new transmitter and receiver to make it work

    • @vacuumpowered6119
      @vacuumpowered6119 3 ปีที่แล้ว

      @@Benthedroneguy okay, thanks:D

  • @stonewallsaucedo5613
    @stonewallsaucedo5613 ปีที่แล้ว

    Did you have to switch your controller or can you use the original one that came with car

  • @nunu6158
    @nunu6158 4 ปีที่แล้ว

    What servo are you using?Link?

    • @rcmedia9516
      @rcmedia9516 4 ปีที่แล้ว

      Look for my comment on this page. Lists all things including servo. Current links.

  • @DeeRC-jp5hg
    @DeeRC-jp5hg 3 ปีที่แล้ว

    Servo what saiz bos

  • @kristofferdiessel3599
    @kristofferdiessel3599 3 ปีที่แล้ว

    What's the top speed

  • @olexll1586
    @olexll1586 4 ปีที่แล้ว

    What pinion are you using

    • @rcuniversespeed9447
      @rcuniversespeed9447  4 ปีที่แล้ว +1

      OLeXll stock. 3650 motor has 3.175mm shaft which lets you use the stock pinion

  • @220374alf
    @220374alf 4 ปีที่แล้ว

    Sorry mate ...but your links don’t take me to the upgrade items!

  • @jfacura
    @jfacura 4 ปีที่แล้ว

    What servo you use ??

    • @AszBall
      @AszBall 4 ปีที่แล้ว +1

      jfacura - he put it in the description

    • @jfacura
      @jfacura 4 ปีที่แล้ว

      Thank

  • @joelm4640
    @joelm4640 4 ปีที่แล้ว

    What servo are you using for steering?

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว

      Emax servo... JX Servo PDI-1181MG Digital 17g 3.6 kg Metal Gear RC Model Plane Fixed Wing:

  • @Phen0mable
    @Phen0mable 4 ปีที่แล้ว +1

    Metal on plastic ? What could possibly go wrong 😂😂😂

  • @classicvwbugs
    @classicvwbugs 4 ปีที่แล้ว

    camera work is all over the place...

    • @rcuniversespeed9447
      @rcuniversespeed9447  4 ปีที่แล้ว

      Chris Vallone yeah sorry man. I know this was very amateur

  • @mechanicalmanny494
    @mechanicalmanny494 2 หลายเดือนก่อน

    Shim up the front diff

  • @MTPhoTuu1972Pho
    @MTPhoTuu1972Pho 3 ปีที่แล้ว

    Ok

  • @samwoods1940
    @samwoods1940 4 ปีที่แล้ว

    Can I use the stock transmitter with a random receiver?

    • @rcuniversespeed9447
      @rcuniversespeed9447  4 ปีที่แล้ว

      Sam Woods no you need to match transmitter to receiver.

  • @pissywilly
    @pissywilly 4 ปีที่แล้ว

    Has anyone ran the wltoys brushless kit? They sell for about $106 with a reciever.

    • @classicvwbugs
      @classicvwbugs 4 ปีที่แล้ว

      do you have a link to that? Works with this car?

    • @pissywilly
      @pissywilly 4 ปีที่แล้ว

      @@classicvwbugs www.wltoysrc.com/home/4212-wltoys-xk-144001-brushless-motor-with-transmitter-complete-kit.html

    • @classicvwbugs
      @classicvwbugs 4 ปีที่แล้ว +1

      @@pissywilly wow no kidding, very cool. Yeah so now my question is what you asked, has anyone run with this kit? =o)

    • @pissywilly
      @pissywilly 4 ปีที่แล้ว

      @@classicvwbugs i put my own kit together it basically has to run of 3 pin connectors into the reciever box not 4 pin like original electrics. You can buy a remote and reciever with a sterring gyro which i wish i had got that keeps the fronts pointing forward even if the back gets out of shape

  • @user-qb8kb3or3w
    @user-qb8kb3or3w 4 ปีที่แล้ว

    What is the name of the servo

  • @familyman8644
    @familyman8644 4 ปีที่แล้ว

    Why you have so many? You selling a modded up china car?

  • @boostednova8278
    @boostednova8278 4 ปีที่แล้ว +1

    Keeps talking about the car , the speed controller , the reciever , the motor , the battery , the specs for everything...what he did , how he did it , as many times as hes mentioned the battery he hasnt said what size it ....Pulling hair out lol...What size is it ...? Looks like 11.1 volts 2200Mah...lol

  • @samwoods1940
    @samwoods1940 4 ปีที่แล้ว

    Can you use the stock servo?

  • @nossrc5638
    @nossrc5638 3 ปีที่แล้ว

    The plastic gear it won't last long starting from scratch

  • @SmokedGaming_Official
    @SmokedGaming_Official 4 ปีที่แล้ว

    all the links are broken

  • @kodak_jack
    @kodak_jack 4 ปีที่แล้ว

    This is what gets done after the original electronics goes bad. Since it’s for a kid, you need to make sure you don’t go nuts with buying too big a motor. You need to replace the motor, ESC, servo and receiver, which also requires a new transmitter =$$$$$$$. Use it as is until something goes wrong.

  • @shingod700
    @shingod700 4 ปีที่แล้ว +2

    For the price I think it’s a better to deal to just buy the real lc racing emb for 175$ It has way better parts and it is brushless from factory.

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว

      I do agree... after some time on this I would have been better off going with EMB.

    • @flatspotting2898
      @flatspotting2898 3 ปีที่แล้ว

      Where can you buy it?

  • @petewilliams5517
    @petewilliams5517 4 ปีที่แล้ว +1

    You really do need to improve your video filming its just moveing around to much cant see what your doing half the time try useing tripod would be much better ty

    • @rcuniversespeed9447
      @rcuniversespeed9447  4 ปีที่แล้ว

      Pete Williams I agree. I just really do this for fun but yes I can get better.

    • @petewilliams5517
      @petewilliams5517 4 ปีที่แล้ว

      Hi ty for replying I just wonted to try to help your video work out as what you have done to 144001wltoy is great mine is std still but when it breaks I'll try copying you great idea on brushless motor ECT again. Ty for replying regards Pete 👍👍🤗

  • @czaras_
    @czaras_ 3 ปีที่แล้ว +1

    THERE ARE so many questions to the author about this upgrade but as we can see he just doesn't care about it. SO SAD and I just can't understand his attitude :(

    • @verofpv6152
      @verofpv6152 3 ปีที่แล้ว

      I know right, but his had such a long day working and chose to record on youtube.. like take it seriously this is why youtube sucks

  • @georgesietmann7649
    @georgesietmann7649 3 ปีที่แล้ว

    Work on your camera skills. Reely shakey

    • @H60ace
      @H60ace 3 ปีที่แล้ว

      And you can work on your spelling skills.

  • @familyman8644
    @familyman8644 4 ปีที่แล้ว

    Gears sound bone dry already

    • @DariusBarazandeh
      @DariusBarazandeh 4 ปีที่แล้ว

      Correct....that's the problem with these. Put some oil in those diffs.

  • @JeepITguy
    @JeepITguy ปีที่แล้ว

    Dude doesn't even know the difference between a transmitter and a receiver....

  • @ronlaisle9512
    @ronlaisle9512 3 ปีที่แล้ว

    Try using a tripod for your camera. I'm getting seasick watching you wave the camera around. This takes your video from 5 stars to one. You are stammering and yammering so bad can't keep up with what you are trying to say and do.