Tip for anyone using expanding foam tape in hot weather or a warm house put it in the fridge to cool. It stops it from expanding too quickly. We had to keep a fridge on-site during the summer months whilst installing timber framed windows and using this tape to finish.
@@CharlieDIYtecould you please do an in depth video on how to use a stud/pipe/wire detector as I've heard people saying you haven't done any videos on this. Thanks. 👍
I used this 20x20mm tape around the walls of the home studio so that the beams don't make direct contact with each other, and now can't cause not any vibrations. it was a test but it turned out well, now i have a soundproof home studio and the neighbors are happy too and i'm happy too wall i don't hear any noise from the street or the neighbors. the whole construction took three months but it was worth it, by experimenting you always learn something new
I have an oak frame house and so have used this product so fill gaps where the oak has settled/shrunk/twisted. One tip I was given was to run a moist cloth along the adhesive edge which then makes it much easier to feed and position the foam strip into the gap before the adhesive grabs the surface.
That's a great tip, Ian. Thanks for sharing. This stuff must be manna from heaven for oak frame houses. I'm planning an oak framed extension of my own so I'm sure it will be put to good use on that too 👍
I LOVE it ! You told me everything - including all the tips. Controlling those pesky "draughts' is the difference between a warm efficient house and a slightly irritating slight coldish house.
I'm going to have to do another video on this some time, as since doing this vid, I've discovered a load of additional benefits to this tape. In the meantime, here are a few extra points that I think it would be worth knowing if you're interested in buying expanding foam tape: - expands from sizes of 1mm up to 50mm - can be painted over with standard emulsion - compatible with all known standard building materials - seals against wind, dust and driving rain. On the rain point, it's weather resistant to 600 pascals (force 11 driving rain but is NOT water proof) - has acoustic reduction to 58 db (against the acoustic standard of 50db) - perfect for use as a thermal break as it doesn't transfer heat - fire resistant class B1 rated - vapour diffusion permeable - so allows joints to breathe whilst keeping water penetration out to 600 pascals pressure - will expand and contract in heat/ cold cycles, whereas spray foam will crack - if the tape gets wet its ventilation aspect will dry it out and anything it adheres to
@Charlie DIYte if you used expanding spray foam on a dot and dabbed wall - between the plaster board and the floor before the skirting is put onto the wall - Would that not allow the walls to breath and potentially cause damp issue. I know that walls shouldnt be boarded to the floor because of damp issues but is that still an issue with expanding foam?
I forgot to look under your show info on where to buy.? Is it available on Amazon? I’m always looking for new ideas. Appreciate all the work and valuable information you share on your DIY program. Thank you
I live in a twenty year old Barratts house. The wall partitions between the bedrooms suffer this problem, horrendous gaps that you can actually shove a ruler or whatever through the gap in one bedroom into the other! I've no idea why the previous owners never sorted this out, the drafts and the sound travelling was enough for me to purchase this expanding tape. Worked a treat. Cut the drafts and cut the sound between bedrooms.
You are the guy Ive just come back to and watched again. I think I need this stuff.Just had new windows fitted by council and my front and back living room windows are in 2 parts. Glass and then plastic panel to meet floor. There are massive drafts coming in where the concrete subfloor meets the trim.
Comes just the right time this. I live in an ancient property with a cold, damp cellar and gaping gaps at some points in my skirting. was gonna go the spray foam route but will be taking a good look at this.
Would love for you channel to also include home servicing as well as home DIY. Things like how to level a wobbly washing machine or how to draft seal an old front door etc. Great video.
Thanks for that - really appreciate the feedback, and actually it's really important, because for example, I fixed my dishwasher recently by flicking the pump with my finger, which had got stuck. Would be a really simple video but I wasn't sure if people would want to see stuff like that. But I'll include as much as I can going forward.. 👍
Ireland must be behind the times I just searched for this product in my country and I don't think it was even heard of here. I find some products are not really ideal for some applications that are even mentioned on the package but can be great and ideal for other areas not mentioned. I can see some ideas for its use in my hobbies similar to protection and cushioning items. You did great showing this product and opened other beneficial tape ideas ideal for me. Thank you so much. I've sent a message to Screwfix a popular hardware near me and lots of branches nation wide about this product hoping they might consider adding to their stock. Great video
Wow. Never heard of this stuff but I have now. Not something I currently need but it’s good to have this in the memory locker. Once again Charlie well done.
Interesting product. When you started, I thought it was just the draft excluder tape that’s been around for years (the sort that goes really hard and crumbly after a few years ). Unbelievable expansion and I can see it being so useful. Thanks.
Had no idea this product even existed, can think of a million uses, thanks for taking the time to make this video and Merry Christmas to you and yours :)
It was trade specific for years and I used it in Germany in the 90's. It used to bleed into paint and can grow sideways especially if it's not stuck down on one side. And the roll can turn into one almighty mess whilst your not looking. But like you say it has a lot of uses.
Great video with good tip at end. Was recommended to use this tape by passive house builder, for window surrounds as foam and silicone degrade (as can see from original install 18 months ago) losing airtightness, as well as being messy. Although pricy well worth it. Have to work fast, practise get better every time. Such a neat and resilient finish. Far better than other methods, tried em all over years. I put my skirting on with builder foam, glad, as have had to remove sections for fitting furniture, comes off with breadknife and doesn't rip plaster off like no-nails if do have to take off, no nail holes to fill either.
Thanks for your great channel! A video on using this foam, or the rubber equivalent, to seal door gaps would be great. I've done a few and it can be tricky to move striker plates to ensure the latch continues to line up with the striker plate. Your insights would be much appreciated!
Thanks a ton for all your videos Charlie! I love DIY and often come across your videos when searching for new methods etc and you always have loads of great tips and freely share your knowledge. Your finish and attention to detail is awesome. Keep up the good work! God bless you and your family!
Typically one of the better videos in it's kind. This is some other thing about it: ??cutting a large enough piece tape off in the beginning before use?? I think it has something to do with the same reason that the roll can be kept from expanding by only duct taping it in one place.
Not sure if you've seen it Charlie but I used left over Dodomat insulation from my campervan conversion. Comes in different thicknesses, highly water resistant, comes in panels or a roll and just sticks on. Brilliant stuff to use around windows. I've used it around windows and areas in my 400 yr old cottage. Then purchased PET secondary glazing panels all cut to size, magnetic and offer better insulation that double glazing.
Thanks Stephen that's very interesting! Particularly like the Dodomat and a friend who lives in a listed property up my lane does a similar thing with DIY secondary glazing panels.
Hi Charlie, i had a similar issue and was fed up with the ogee skirting and caulk collecting so much dust. I ended up ripping off the skirting and tiling halfway up the room, tile meeting tile with good quality sanitary silicone. Looks great and so easy to keep clean 🙌. Thanks for another helpful video!
Thanks Alan. Have no fear, the videos will keep coming - it's what keeps me sane 🤣 You too. Massive thanks for supporting the channel and I look forward to more charts in the New Year 👊
Great stuff. I took out a window in my 40 year old Swedish kit house and found foam tape was used way back then to seal the gap. British house builders still haven't progressed much beyond caves yet.
John, our housing stock is appalling and no signs of it getting any better. The government falls at every opportunity it gets to change the rules on house building, choosing instead to bring in punitive new laws designed to phase out gas boilers to push everyone into heat pumps, which won't work because 90% of the UKs housing stock is badly insulated, oh and we've got a national shortage of skilled builders. 🤦
Aaron, you're very welcome, and likewise, I'd like to thank you for taking the time to comment. It takes an age doing the videos and editing, and so I can't tell you what a source of encouragement and inspiration the comments are - thanks so much for supporting my channel!
Good video and very interesting product, thanks for taking the time to share this. I wonder has this solved your issue of the draft? The reason I ask is this product appears to be of cellular nature with no impermeable membrane to prevent air flow. As with normal insulation the cellular region is to contain air (a very good insulator) however airflow cannot be permitted across the air-containing membrane or it will not be effective. Is something in-built into the strips?
Thank you! Now I know the name and where they also used it for (in a building nearby). They've used it to fill the gap between a wooden extension and a stone brick wall. The expanding foam tape nicely follows the rough bricks and on the other side it is nicely sticked to the wooden frame!
Charlie you are a diamond just ordered some from screwfix no 1m tho will have to shop around for that one I will shove under quick with my wide scraper. I was trying wire wool under it nd it was a narsty job especially slim parts I am hoping it keeps spiders out from under boards 😉 thank you
Thanks Andy! Great to have you on-board! Apologies though about the looped music in some of my earlier videos - a big error but you live and learn! Have a good Christmas 👍
Never heard of this before great stuff! Maybe if you slide the foam tape in with the backing adhesive still unpeeled then have one edge slightly unpeeled and you can slowly peel it while it’s in situ.
Thank you so much for the advise I have new skirting in my kitchen and has big gaps underneath . Can you put caulk over the tape for a smooth finish and to paint the boards?
Something else that would have worked is what we call at "backer rod" in the US. It's a dense foam with a circle profile that comes in many diameters. You pack it in and can caulk over later if you want. It's super cheap, effective, and easy to work with.
It depends. Certainly for insulated plasterboard, the recommendation is that you seal the gap with expanding foam to eliminate any cold bridges. But I guess for non insulated plasterboard that doesn't have a vapour barrier, perhaps it's not so important and could even help with vapour diffusion. I'd be interested in anything anyone else can add to this.
Thank you Charlie I wish I gad known before having my bedroom carpet down ,it would have helped to reduce noise I love your tips as I’m just doing my kitchen
I didn't know expanding foam tape existed. It will solve my problem. For your project, you can install a painted, 1/4 round dowel to cover and help protect your foam, followed by a clear caulk to seal both edges, touching floor and trim. I can use regular foam for my removable indoor storm windows made if polycarbonate sheets and frame.
Thank you, Charlie! Great video and very informative too. I’m pleased to have come across this video for dealing with draughty gaps under skirting boards as I have two rooms that could do with this stuff. Great tips on how to handle the expanding tape. Merry Christmas to you and your family.
Lovely to hear from you Indy. Yes the more I read about this stuff the more I like it. The company I bought it from got in touch with me the other day as they must have picked up on the links in the Description - really nice people as it turns out - and I had a long chat with their technical person. It's breathable whilst being an excellent thermal break, so it will solve the draught but allow the void behind to breath without any moisture passing through. A win win! A very happy Christmas to you too!! 🎄⛄
Thanks. The expanding foam tape is breathable and unlikely to crack going forward. Also if it's on show you'll want to use.. Otherwise spray foam is fine. Get a non stick gun if you go for spray foam. That way you can leave the can on the gun until it's finished.
Thanks Charlie good to know this stuff exists. I am a subscriber to your channel and your videos are excellent. I followed your advice last year on how to make the floating desk which my wife was able to use to as a workbench to make our daughter's wedding dress. I noticed in this video you used a router. Would you consider making a video on router basics? Keep up the good work!
Thanks Edward - so chuffed you've found my content useful, and also thanks for sub'ing to the Channel and for taking the time to let me know - the comments are a constant source of encouragement and motivation - pretty crucial really! Yes, I should probably do that. There are a lot of videos out there by carpenters with a lot more experience than me, but I guess most of them tend to use routers tethered to a router table, whereas being a bit of a DIYer, I tend to use mine freehand. I'll add it to the list. Have a great Christmas!
Great videos. The expanding foam from the the gun would have not looked as good. Probably be sealed better but would be a mess. This tape looks great for certain jobs. Nice one.
That material looks exactly like Armourflex tape or pipe insulation used in air condition installations. See you pack it in under the skirting I think I would now have to get some sort of square or flat ended podger to assist with packing it into the gap. Like the colour of the bathroom wall BTW, what is it??
Hi Charlie, I have a similar problem in the wooden cabin in our garden. I plan to silicon under the skirting board and then use the FUGI profiler to get a nice flush finish. What do you think?
Hi, iv got some pretty bad skirting gaps in my flat, i also have a bit of an issue with silverfish which are getting through these gaps. Would this expanding tape help stop silverfish coming in through the gaps? Or will they be able to get through it?
Thanks as ever Charlie for a very helpful and clear video. Your explanations are always pitched at the right level. I was intending to seal my gaps with colour-matched caulk to stop draughts. Wouldn't this sponge still let cold air through?
No it doesn't let cold air through and it will give much better thermal protection than the caulk. I wouldn't worry too much about colour matching as, once it's in, you don't see it 👍🏻
Thanks a lot Charle!!! So great to get to know to figure out gaps between floor and skirting board in my living room!! Btw could we add silicone on top of it in the kitchen dining room to prevent from getting wet? Thank you very much again💚
You're welcome. It will be quite difficult to get a neat joint with silicone but I suppose you could. This stuff is water resistant though so you question if it's worth it.
As ever great informative video, never knew this stuff existed! Do you think this would work for filling gaps between the centres gap in French doors? Or would it start expanding again when you opened the doors?
Option 4: take off the skirting boards and use an air barrier tape like siga to prevent cold air infiltration. Replace skirting board over the tape when it's sealed.
Good point John. I was reading today that this tape is vapour permeable, ie breathable so I'm trying to work out where that leaves you with the cold bridging issue.
Our gap in the living room is more than double since the last tenant had laminate flooring down. The plaster is in poor condition so removing the skirting and lowering it would require a lot of work. The gap will be too large for filler or chaulk and I’d make an absolute mess using expanding foam so I’m thinking of using this. The gap seems around 2cm deep by 2cm height given we’ve got carpet down and I’m having to poke my finger under to measure. Not sure which tape I should use since there’s so many measurements. One says suitable for 8-15mm gaps but expands to 44mm? Confusing. Not sure which width to go for
This is great! I wish I had known about this when having laminate fitted downstairs in rooms where the was already skirting. It would have been brill in the expansion gaps. I would be interested to know if the room feels different temperature wise now you have fitted it? Has it meant you could turn the heating down in the room?
Can I used this around my doors(indoors ) have gaps around the sides draft coming through.Also can I use this around the window frames frames( drafts ) old windows
Greetings from Canada - very nicely presented video - well edited and informative. I’m curious if this material absorbs water, especially in a bathroom. Idea for spray foam people - different colours would be helpful although I know from experience how unwieldy it can be!
Hi there, great to hear from you. I've included the technical info I gleaned from the company when I was researching this stuff. Suffice to say that whilst it's weather resistant to force 11 driven rain or 600 pascals, it's not water proof, so if you are subjecting it to immersion, it wouldn't do the job. Air tight to 1.0m3, BG1 and BGR. Expands from sizes of 1mm up to 50mm. Weather resistant to 600 pascals (force 11 driven rain). Acoustic reduction to 58db. (A rated acoustic standard is 50db). Fire resistant class B1 rated. Perfect for use as a thermal break. Allows joints to breathe whilst keeping water penetration out to 600 pascals pressure. NOT water proof! Anti-vibration qualities. Will expand and contract in heat/cold cycles (spray foam will crack). If tape gets wet(like installed at bottom joint of bathroom skirting), its ventilation aspect will dry it out, and anything it adheres to.
Charlie DIYte wow Charlie - thank you. This is very detailed! Great channel. I don’t do a ton of diy anymore but I’m subscribing just because you’re awesome!!
I have a warped front door. In some places it doesn’t meet the jamb. Normal weather foam tape works in some areas but not where the gaps are larger. Do you think expanding foam would help?
It's better for applications that you don't use - as every time you open the door it will expand, but if it's a door you use infrequently it could be useful.
Very interesting Charlie, thanks for the demo. Dont worry about the skirting board painting, they look cleaner than a lot of pricey hotels mate. Merry Christmas to you and yours.
Yes it will expand every time it's depressed. But I probably wouldn't use it for an application where it's constantly being required to expand and contract as I imagine the expansion will become less over time.
I'm a 65 year old woman and I love watching DIY videos. Yours are really good, lots of useful tips.
Tip for anyone using expanding foam tape in hot weather or a warm house put it in the fridge to cool. It stops it from expanding too quickly. We had to keep a fridge on-site during the summer months whilst installing timber framed windows and using this tape to finish.
Thanks Sam. Yes the manufacturer mentioned that. Great tip 👊
@@CharlieDIYtecould you please do an in depth video on how to use a stud/pipe/wire detector as I've heard people saying you haven't done any videos on this. Thanks. 👍
Someone didn't watch until the end 😂
I used this 20x20mm tape around the walls of the home studio so that the beams don't make direct contact with each other, and now can't cause not any vibrations.
it was a test but it turned out well, now i have a soundproof home studio and the neighbors are happy too and i'm happy too wall i don't hear any noise from the street or the neighbors.
the whole construction took three months but it was worth it, by experimenting you always learn something new
Good thinking Derk - great job! 👍🏻
Like others here I had no idea this stuff existed. Well done once again Charlie, you're a legend buddy! Carry on providing help to us DIY'ers!
I have an oak frame house and so have used this product so fill gaps where the oak has settled/shrunk/twisted. One tip I was given was to run a moist cloth along the adhesive edge which then makes it much easier to feed and position the foam strip into the gap before the adhesive grabs the surface.
That's a great tip, Ian. Thanks for sharing. This stuff must be manna from heaven for oak frame houses. I'm planning an oak framed extension of my own so I'm sure it will be put to good use on that too 👍
I LOVE it ! You told me everything - including all the tips. Controlling those pesky "draughts' is the difference between a warm efficient house and a slightly irritating slight coldish house.
I'm going to have to do another video on this some time, as since doing this vid, I've discovered a load of additional benefits to this tape. In the meantime, here are a few extra points that I think it would be worth knowing if you're interested in buying expanding foam tape:
- expands from sizes of 1mm up to 50mm
- can be painted over with standard emulsion
- compatible with all known standard building materials
- seals against wind, dust and driving rain. On the rain point, it's weather resistant to 600 pascals (force 11 driving rain but is NOT water proof)
- has acoustic reduction to 58 db (against the acoustic standard of 50db)
- perfect for use as a thermal break as it doesn't transfer heat
- fire resistant class B1 rated
- vapour diffusion permeable - so allows joints to breathe whilst keeping water penetration out to 600 pascals pressure
- will expand and contract in heat/ cold cycles, whereas spray foam will crack
- if the tape gets wet its ventilation aspect will dry it out and anything it adheres to
Waste of time mate
@ep91monster What’s your problem ? Charlie simply showing people an option to stop draught. Btw you way to run sealant along the gap is shit!
@Charlie DIYte if you used expanding spray foam on a dot and dabbed wall - between the plaster board and the floor before the skirting is put onto the wall - Would that not allow the walls to breath and potentially cause damp issue. I know that walls shouldnt be boarded to the floor because of damp issues but is that still an issue with expanding foam?
I forgot to look under your show info on where to buy.? Is it available on Amazon?
I’m always looking for new ideas.
Appreciate all the work and valuable information you share on your DIY program. Thank you
I live in a twenty year old Barratts house. The wall partitions between the bedrooms suffer this problem, horrendous gaps that you can actually shove a ruler or whatever through the gap in one bedroom into the other! I've no idea why the previous owners never sorted this out, the drafts and the sound travelling was enough for me to purchase this expanding tape. Worked a treat. Cut the drafts and cut the sound between bedrooms.
You are the guy Ive just come back to and watched again.
I think I need this stuff.Just had new windows fitted by council and my front and back living room windows are in 2 parts.
Glass and then plastic panel to meet floor.
There are massive drafts coming in where the concrete subfloor meets the trim.
Yes it'll be good for that. Measure the widest gap and find a tape that expands a little more than that gap. Good luck 🤞
No idea why I’ve just sat and watched this but nice work and lovely bathroom 😎
Thanks, I appreciate that!
Comes just the right time this. I live in an ancient property with a cold, damp cellar and gaping gaps at some points in my skirting. was gonna go the spray foam route but will be taking a good look at this.
Spray foam is good but it's not breathable. So if you need that the foam tape is better 👍
@@CharlieDIYte Gonna check it out shortly. Cheers.
Would love for you channel to also include home servicing as well as home DIY. Things like how to level a wobbly washing machine or how to draft seal an old front door etc.
Great video.
Thanks for that - really appreciate the feedback, and actually it's really important, because for example, I fixed my dishwasher recently by flicking the pump with my finger, which had got stuck. Would be a really simple video but I wasn't sure if people would want to see stuff like that. But I'll include as much as I can going forward.. 👍
@@CharlieDIYte would love to see videos about diy bits and bobs around the house!
Ireland must be behind the times I just searched for this product in my country and I don't think it was even heard of here. I find some products are not really ideal for some applications that are even mentioned on the package but can be great and ideal for other areas not mentioned. I can see some ideas for its use in my hobbies similar to protection and cushioning items. You did great showing this product and opened other beneficial tape ideas ideal for me. Thank you so much. I've sent a message to Screwfix a popular hardware near me and lots of branches nation wide about this product hoping they might consider adding to their stock. Great video
Thanks. I'm surprised you can't get this in Ireland, but hope you can get hold of some. 👍
@@CharlieDIYte I will hopefully at some stage thanks
Wow. Never heard of this stuff but I have now. Not something I currently need but it’s good to have this in the memory locker. Once again Charlie well done.
Thanks David 👍
Didn't even know it existed! now I do thanks to you. Thank you! this is great info
Interesting product. When you started, I thought it was just the draft excluder tape that’s been around for years (the sort that goes really hard and crumbly after a few years ). Unbelievable expansion and I can see it being so useful. Thanks.
Yep. And it's impregnated for weather proofing so pretty bullet proof for applications like this.
That's what I thought too. I was surprised to see it expand so much. Good to know it's weather proofed too.
Had no idea this product even existed, can think of a million uses, thanks for taking the time to make this video and Merry Christmas to you and yours :)
You too, Christopher and thanks for the comment!
It was trade specific for years and I used it in Germany in the 90's. It used to bleed into paint and can grow sideways especially if it's not stuck down on one side. And the roll can turn into one almighty mess whilst your not looking. But like you say it has a lot of uses.
I’ve just bought this on your recommendation. I hope it works ❤️. I’ll keep you posted. Thank you
Good luck 🤞
I liked this video, you are some bullish arrogant workman just chilled and more normal. Thanks for this.
Thanks 👊
Like allot of people. I Never know knew this stuff existed. Just what I was looking for recently. Another good intuitive video. Thanks.
Great video with good tip at end. Was recommended to use this tape by passive house builder, for window surrounds as foam and silicone degrade (as can see from original install 18 months ago) losing airtightness, as well as being messy. Although pricy well worth it. Have to work fast, practise get better every time. Such a neat and resilient finish. Far better than other methods, tried em all over years.
I put my skirting on with builder foam, glad, as have had to remove sections for fitting furniture, comes off with breadknife and doesn't rip plaster off like no-nails if do have to take off, no nail holes to fill either.
Thanks for that. Yes, I'll be using the builder foam next time for my skirting. 👍
Glad I found this. Had some contractors in to change the wood flooring & we now have drafts + slugs getting in the house. 🤬
Thanks for your great channel!
A video on using this foam, or the rubber equivalent, to seal door gaps would be great. I've done a few and it can be tricky to move striker plates to ensure the latch continues to line up with the striker plate. Your insights would be much appreciated!
Thanks a ton for all your videos Charlie! I love DIY and often come across your videos when searching for new methods etc and you always have loads of great tips and freely share your knowledge. Your finish and attention to detail is awesome. Keep up the good work! God bless you and your family!
I used this to fit a roof vent on a van corrugated roof. Great stuff
Nice - it would be perfect for that 👍
Typically one of the better videos in it's kind. This is some other thing about it: ??cutting a large enough piece tape off in the beginning before use?? I think it has something to do with the same reason that the roll can be kept from expanding by only duct taping it in one place.
Loving the chrome pipes.
Like the others, I didn't know this existed. I need exactly this for a cold room, so this video couldn't have come at a better time. Thanks Charlie.
Cheers for the comment Rob. Good luck with the job - it'll hopefully make quite a difference!
1:32 "It's a lot of effort and work to do that, and quite frankly I've got other priorities now, like getting back into the bedroom" 😏
Like we really needed that info 😏
Not sure if you've seen it Charlie but I used left over Dodomat insulation from my campervan conversion. Comes in different thicknesses, highly water resistant, comes in panels or a roll and just sticks on. Brilliant stuff to use around windows. I've used it around windows and areas in my 400 yr old cottage. Then purchased PET secondary glazing panels all cut to size, magnetic and offer better insulation that double glazing.
Thanks Stephen that's very interesting! Particularly like the Dodomat and a friend who lives in a listed property up my lane does a similar thing with DIY secondary glazing panels.
Really useful video. Particularly good that the tape does not absorb moisture.
Hi Charlie, i had a similar issue and was fed up with the ogee skirting and caulk collecting so much dust. I ended up ripping off the skirting and tiling halfway up the room, tile meeting tile with good quality sanitary silicone. Looks great and so easy to keep clean 🙌. Thanks for another helpful video!
Really, really interesting, never knew it even existed. Thanks for the intro. Top-quality pro production as usual. Happy Christmas!
You too Robert. Thanks 👍
@@CharlieDIYte i have messaged you on Instagram
Thanks Charlie ! Had no idea that this stuff was available. Have a great Christmas, and keep the videos coming in the New Year.
Thanks Alan. Have no fear, the videos will keep coming - it's what keeps me sane 🤣 You too. Massive thanks for supporting the channel and I look forward to more charts in the New Year 👊
Great stuff. I took out a window in my 40 year old Swedish kit house and found foam tape was used way back then to seal the gap. British house builders still haven't progressed much beyond caves yet.
John, our housing stock is appalling and no signs of it getting any better. The government falls at every opportunity it gets to change the rules on house building, choosing instead to bring in punitive new laws designed to phase out gas boilers to push everyone into heat pumps, which won't work because 90% of the UKs housing stock is badly insulated, oh and we've got a national shortage of skilled builders. 🤦
Charlie, I'd like to use this opportunity to thank you for your videos, I've picked up a lot of cool DIY tricks from you.
Aaron, you're very welcome, and likewise, I'd like to thank you for taking the time to comment. It takes an age doing the videos and editing, and so I can't tell you what a source of encouragement and inspiration the comments are - thanks so much for supporting my channel!
Another great video Charlie. Thanks for the tips.
You're welcome Jonathan. Good to hear from you again and thanks for the comment. Have a great Christmas 👍
Good video and very interesting product, thanks for taking the time to share this. I wonder has this solved your issue of the draft? The reason I ask is this product appears to be of cellular nature with no impermeable membrane to prevent air flow. As with normal insulation the cellular region is to contain air (a very good insulator) however airflow cannot be permitted across the air-containing membrane or it will not be effective. Is something in-built into the strips?
That is brilliant Charlie. Thank you for the advice and video
Thanks Steven!
Everbuild Acoustic Sealant is good for gaps like that. It remains flexible and you can paint it.
Thanks👍
Thank you! Now I know the name and where they also used it for (in a building nearby). They've used it to fill the gap between a wooden extension and a stone brick wall. The expanding foam tape nicely follows the rough bricks and on the other side it is nicely sticked to the wooden frame!
Wow I’ve never seen this this would be very handy thank you for the information great review 😊
This was super helpful! Thank you.
Thanks 👍
Charlie you are a diamond just ordered some from screwfix no 1m tho will have to shop around for that one I will shove under quick with my wide scraper. I was trying wire wool under it nd it was a narsty job especially slim parts I am hoping it keeps spiders out from under boards 😉 thank you
New to channel , very impressed !
Thanks Andy! Great to have you on-board! Apologies though about the looped music in some of my earlier videos - a big error but you live and learn! Have a good Christmas 👍
Never heard of this before great stuff! Maybe if you slide the foam tape in with the backing adhesive still unpeeled then have one edge slightly unpeeled and you can slowly peel it while it’s in situ.
Good to hear from you mate! Yes, not a bad idea, that!
Great video! Gotta get some for my doors.
Thank you so much for the advise I have new skirting in my kitchen and has big gaps underneath . Can you put caulk over the tape for a smooth finish and to paint the boards?
thank you CHarlie for your very informative video, I am useless at DIY but will have a go now thanks to your advice here, cheers StuartW
Something else that would have worked is what we call at "backer rod" in the US.
It's a dense foam with a circle profile that comes in many diameters.
You pack it in and can caulk over later if you want.
It's super cheap, effective, and easy to work with.
Thanks for this, buddy. Yes, I'm familiar with backer rod but haven't used it, myself.
Sounds great is it a new thing isn’t there supposed to be a gap between the floor and plasterwork behind the skirting ??
It depends. Certainly for insulated plasterboard, the recommendation is that you seal the gap with expanding foam to eliminate any cold bridges. But I guess for non insulated plasterboard that doesn't have a vapour barrier, perhaps it's not so important and could even help with vapour diffusion. I'd be interested in anything anyone else can add to this.
Thank you Charlie I wish I gad known before having my bedroom carpet down ,it would have helped to reduce noise I love your tips as I’m just doing my kitchen
@@joychip5994 Hi Joyce, I've just slightly edited my above comment. Doesn't really change anything we discussed but thought I'd let you know.
I didn't know expanding foam tape existed. It will solve my problem. For your project, you can install a painted, 1/4 round dowel to cover and help protect your foam, followed by a clear caulk to seal both edges, touching floor and trim. I can use regular foam for my removable indoor storm windows made if polycarbonate sheets and frame.
It's a fair point. I'm just not a big fan of dowels but you're right. This way you insulate whilst also protecting the foam.
Thank you, Charlie! Great video and very informative too. I’m pleased to have come across this video for dealing with draughty gaps under skirting boards as I have two rooms that could do with this stuff. Great tips on how to handle the expanding tape. Merry Christmas to you and your family.
Lovely to hear from you Indy. Yes the more I read about this stuff the more I like it. The company I bought it from got in touch with me the other day as they must have picked up on the links in the Description - really nice people as it turns out - and I had a long chat with their technical person. It's breathable whilst being an excellent thermal break, so it will solve the draught but allow the void behind to breath without any moisture passing through. A win win! A very happy Christmas to you too!! 🎄⛄
👋 learning loads from this channel. I hope all is going well with kitchen. Just a question, why use expanding foam compared to normal spray foam?
Thanks. The expanding foam tape is breathable and unlikely to crack going forward. Also if it's on show you'll want to use.. Otherwise spray foam is fine. Get a non stick gun if you go for spray foam. That way you can leave the can on the gun until it's finished.
@@CharlieDIYte Thanks for replying back Charlie much appreciated
Cheers Charlie, Great Video its much appreciated your videos are always clear and concise . Keep up the Good Work .
Peter Hadfield 16/2/2021
Thanks Peter, I really appreciate that 👍🏻
Cheers Charlie 🙂👍you should have your own DIY TV Programme enjoy your day.
Peter Hadfield 17/2/2921
great stuff Charlie happy Sunday
Thanks mate - good to hear from you again!
Wow. Never knew such a thing existed. As an aside I’m gutted - I had that Aldi metre rule too but I broke it!
Think I got mine at B&Q.
Next Level Content! As usual!
Aw, thanks Garviel 👍
That was a very good video thankyou...
Very useful - thanks for sharing your experiences!
You're very welcome Graham. Thanks for the comment. 👊
Thanks Charlie good to know this stuff exists. I am a subscriber to your channel and your videos are excellent. I followed your advice last year on how to make the floating desk which my wife was able to use to as a workbench to make our daughter's wedding dress. I noticed in this video you used a router. Would you consider making a video on router basics? Keep up the good work!
Thanks Edward - so chuffed you've found my content useful, and also thanks for sub'ing to the Channel and for taking the time to let me know - the comments are a constant source of encouragement and motivation - pretty crucial really! Yes, I should probably do that. There are a lot of videos out there by carpenters with a lot more experience than me, but I guess most of them tend to use routers tethered to a router table, whereas being a bit of a DIYer, I tend to use mine freehand. I'll add it to the list. Have a great Christmas!
Merry Christmas and a happy new year
Steve
Thanks, you too!
Nice video, well explained. Cheers
Great product,👏🏻👏🏻👍🇬🇧
Great demo
Thanks 👊
Great videos. The expanding foam from the the gun would have not looked as good. Probably be sealed better but would be a mess. This tape looks great for certain jobs. Nice one.
Foam with being toxic as well got to be better for you
Would be interesting to see how it works round windows.
Used compriband for years for passivehaus installs. Very good tape as it is breathable and moves with the build.
Would you try using this on the inner jams of a teak front door? The door would be opening and closing up against the foam.
That material looks exactly like Armourflex tape or pipe insulation used in air condition installations.
See you pack it in under the skirting I think I would now have to get some sort of square or flat ended podger to assist with packing it into the gap.
Like the colour of the bathroom wall BTW, what is it??
Farrow and Ball Elephants Breath, from memory
@@CharlieDIYte 😂😂😂 I thought you was winding me up. Checked and eating my slice of humble pie.
I love that colour.
Hi Charlie, I have a similar problem in the wooden cabin in our garden. I plan to silicon under the skirting board and then use the FUGI profiler to get a nice flush finish. What do you think?
Great video and informative - but why use this instead of (much cheaper) sealant backer rod for skirting draughts?
Backer rod doesn't expand like this does, which you need when the gaps aren't consistent.
@@CharlieDIYte Thanks Charlie, makes sense. I'll get the ruler out again.. Keep the videos going - so interesting and informative!
I had the same problem, bad draft in one area from under skirting. I blocked it up with old wiper blade rubber
Hi, iv got some pretty bad skirting gaps in my flat, i also have a bit of an issue with silverfish which are getting through these gaps. Would this expanding tape help stop silverfish coming in through the gaps? Or will they be able to get through it?
Thanks as ever Charlie for a very helpful and clear video. Your explanations are always pitched at the right level.
I was intending to seal my gaps with colour-matched caulk to stop draughts. Wouldn't this sponge still let cold air through?
No it doesn't let cold air through and it will give much better thermal protection than the caulk. I wouldn't worry too much about colour matching as, once it's in, you don't see it 👍🏻
Thanks a lot Charle!!! So great to get to know to figure out gaps between floor and skirting board in my living room!!
Btw could we add silicone on top of it in the kitchen dining room to prevent from getting wet?
Thank you very much again💚
You're welcome. It will be quite difficult to get a neat joint with silicone but I suppose you could. This stuff is water resistant though so you question if it's worth it.
cant you poke it in with the backing still on, and then pull the backing off at the end ?
Thanks Charlie, good clear Video.
Thanks for the comment 👍🏻
As ever great informative video, never knew this stuff existed! Do you think this would work for filling gaps between the centres gap in French doors? Or would it start expanding again when you opened the doors?
No it wouldn't be great for that because as soon as you opened them it would finish expanding.
You would need a closed cell tape for the french door-this tape is open cell. A closed cell remains the same density
Thanks Andrew. Perhaps something like this bit.ly/2RWWOb8
Is it available outside the UK? Hope it is, thank you for the info.
Note sure Edith. Fingers crossed you find it somewhere or a UK manufacturer who will export 🤞
That’s a great bodge !
"you can hardly tell it's there" mwoaaaa. I don't agree. But it's very cool stuf and usefull too
any tips for when the draft issue is with carpeted floors, please?
Option 4: take off the skirting boards and use an air barrier tape like siga to prevent cold air infiltration. Replace skirting board over the tape when it's sealed.
Good point John. I was reading today that this tape is vapour permeable, ie breathable so I'm trying to work out where that leaves you with the cold bridging issue.
This stuff looks like what I need .. Can you use decorators caulk on top of it ?
I wouldn't advise it. Defeats the object of having a breathable joint.
Our gap in the living room is more than double since the last tenant had laminate flooring down. The plaster is in poor condition so removing the skirting and lowering it would require a lot of work. The gap will be too large for filler or chaulk and I’d make an absolute mess using expanding foam so I’m thinking of using this.
The gap seems around 2cm deep by 2cm height given we’ve got carpet down and I’m having to poke my finger under to measure. Not sure which tape I should use since there’s so many measurements. One says suitable for 8-15mm gaps but expands to 44mm? Confusing. Not sure which width to go for
Excellent thank you for that very much appreciated 👍
You're welcome. Thanks for the comment 👊
Ooo you installed an air filter!
👌
This is great! I wish I had known about this when having laminate fitted downstairs in rooms where the was already skirting. It would have been brill in the expansion gaps. I would be interested to know if the room feels different temperature wise now you have fitted it? Has it meant you could turn the heating down in the room?
I wish you had done this before I filled all my skirting gaps with clear mastic. Will be used in my next home 🤓
I always apply silicone to those areas in a bathroom. Flexible and waterproof. Any reason you don't ?
Can I used this around my doors(indoors ) have gaps around the sides draft coming through.Also can I use this around the window frames frames( drafts ) old windows
You can't use this on moving spaces as the foam will just expand when you open the door or window. Go on AMAZON and get some draught excluder strips
Greetings from Canada - very nicely presented video - well edited and informative. I’m curious if this material absorbs water, especially in a bathroom. Idea for spray foam people - different colours would be helpful although I know from experience how unwieldy it can be!
Hi there, great to hear from you. I've included the technical info I gleaned from the company when I was researching this stuff. Suffice to say that whilst it's weather resistant to force 11 driven rain or 600 pascals, it's not water proof, so if you are subjecting it to immersion, it wouldn't do the job. Air tight to 1.0m3, BG1 and BGR. Expands from sizes of 1mm up to 50mm. Weather resistant to 600 pascals (force 11 driven rain). Acoustic reduction to 58db. (A rated acoustic standard is 50db). Fire resistant class B1 rated. Perfect for use as a thermal break. Allows joints to breathe whilst keeping water penetration out to 600 pascals pressure. NOT water proof! Anti-vibration qualities. Will expand and contract in heat/cold cycles (spray foam will crack). If tape gets wet(like installed at bottom joint of bathroom skirting), its ventilation aspect will dry it out, and anything it adheres to.
Charlie DIYte wow Charlie - thank you. This is very detailed! Great channel. I don’t do a ton of diy anymore but I’m subscribing just because you’re awesome!!
Nice to see Gordon Ramsey doing DIY now!
I have a warped front door. In some places it doesn’t meet the jamb. Normal weather foam tape works in some areas but not where the gaps are larger. Do you think expanding foam would help?
It's better for applications that you don't use - as every time you open the door it will expand, but if it's a door you use infrequently it could be useful.
@@CharlieDIYte thanks Charlie. Ok maybe I’ll try those aluminium & foam/rubber around-the-door weather strips instead then
Hey Charlie I was thinking because you did a video about your circular saw maybe you could do one about your chopsaw
Not a bad idea Josh. I've got a load of skirting boards to install soon so I could weave it into that 🤔
Very interesting Charlie, thanks for the demo. Dont worry about the skirting board painting, they look cleaner than a lot of pricey hotels mate.
Merry Christmas to you and yours.
Thanks David - I appreciate that 👍 A very happy Christmas to you too!
I was just going to silicone my gap to stop the drafts will that do the same job as the tape?
No silicone is a terrible insulator. You'll probably get mould forming on it.
Does it expand once only? Or will it reduce in size when compressed then expand again and again every time it’s released?
Yes it will expand every time it's depressed. But I probably wouldn't use it for an application where it's constantly being required to expand and contract as I imagine the expansion will become less over time.
So you wouldn’t recommend it for draught proofing the front door or windows?
Would it not be easier just to fit the skirting properly?
Hi Charlie. Informative and really useful as always. Great content, keep up the good work and have a splendid Christmas. Kind regards for 2020! Alex.
You too, Alex. Massive thanks for the comment and good to hear from you!