@@geraldstamour1312 nah…..the metal is likely hot garbage. Made well, yes, exquisite craftsmanship obviously, but starting with a base metal of mild steel nails…. The intrinsic metal qualities is what’s lacking here. Will it cut sure will it last likely, but chipping, rate of holding its edge, overall length of sharpness… likely sub par. Nothing on the creator, just not great knife steel to start with.
That’s a beautiful knife Han, i don’t think I’ve seen the blank twisted so much as you did in this video. The handle turned out great such a great piece of wood. 👍🏼
Oh! I failed to notice that the tang wasn't hardened. I'm currently wrecking drill bits in an effort to get through a tang which I did harden. I won't do that again.@@HansKnives
4:39 I can never figure out why forgers never use a runout surface to keep their material from sagging in the press. It's a pretty knife, I love the wood.
Very beautiful, but why do you made this Damascus pattern? Basically you need thin layers orientated with the edge, twist/welding/waving just mess up layers each others.
Ein wunderschönes Messer, wenn leider das Muster kaum noch zu erkennen ist. Es ist für mich zu viel gewesen. Handwerklich kann ich nur den Hut ziehen...einfach wunderbar.
tem uns parafusos de bombas de poço sapo que esses parafusos são feitos de um aço que permanece intocado mesmo depois de 5 a 6 anos no cloro sem derreter ou perde medidas tenta fazer uma faca ou adaga com esse material se não tiver o material posso te mandar ele pelo correio se você quiser tenta essa brincadeira
Blade is too thin , cutting edge is not hollow ground , how long does a blade forged from low carbon steel stay sharp , clanp it in a vise and try to bend it. Next time try using masonry nails they are high carbon steel or steel cable . I had a friend that forged knives from steel cable , much better than nails . I could tell by the sparks from grinder that you were using low carbon steel
![เปิดใจ “ต้นหอม ศกุนตลา” หลังโดนพาดพิงธุรกิจที่เคยทำ และผลกระทบทำถูกปลดฟ้าผ่า! | แฉ 24 ต.ค.67 [2/3]](http://i.ytimg.com/vi/vCi5OIqlxaE/mqdefault.jpg)
You definitely "nailed" it. 👍
This knife, HANS, totally belongs in a high-end kitchenware catalog and/or retailer!
No
@@jayoutdoors1534 Yes
@@geraldstamour1312 nah…..the metal is likely hot garbage. Made well, yes, exquisite craftsmanship obviously, but starting with a base metal of mild steel nails…. The intrinsic metal qualities is what’s lacking here. Will it cut sure will it last likely, but chipping, rate of holding its edge, overall length of sharpness… likely sub par. Nothing on the creator, just not great knife steel to start with.
@@anubis8680 To each one's own! Let's agree to disagree!
I love seeing Damascus because the patterns on knifes can be very beautiful like this one.
That’s a beautiful knife Han, i don’t think I’ve seen the blank twisted so much as you did in this video. The handle turned out great such a great piece of wood. 👍🏼
I'd definitely buy a whole kitchen set excellent work!
BEAUTIFUL! WELL DONE! THANKS for sharing!
What a beautiful knife 👍👍
That’s a beautiful knife
Gorgeous!!!
Nice work!
The Rooster in the Background knew what this knive is for.
A lot of machines, time, energy… how much does it cost ?! 😮❤❤❤
Beautiful job 😊
What a talented man I would love to own a knife like that
Judging by how easily you drilled through the tang, the nail steel does not harden appreciably. Very interesting. And very well photographed.
That drill bit is made of tungsten alloy. Can penetrate 60HRC steel. My oversight, not showing it in detail, and the handle part is not heat treated.
Oh! I failed to notice that the tang wasn't hardened. I'm currently wrecking drill bits in an effort to get through a tang which I did harden. I won't do that again.@@HansKnives
@@paulwiggins183 🍻🍻🍻
Nice knife brother
Love what you do.
Great work 😊
Very Cool!! Great Job
That's a beautiful piece of work, you should set up a website to sell your craft. ❤
Damn guys I think he nailed it
very nice knife,, but,, the way you held onto that small piece of brass with your fingers was scary,,, you should have held it in a vice!!
Humans have at least two replacement fingers 😂
Just keep spinning
Just keep spinning
What do we do!?
We spin, spin
Beautiful. Just right.
4:39 I can never figure out why forgers never use a runout surface to keep their material from sagging in the press. It's a pretty knife, I love the wood.
That’s a fabulous grip. Is it a maple, or walnut, or something else?
Very beautiful, but why do you made this Damascus pattern?
Basically you need thin layers orientated with the edge, twist/welding/waving just mess up layers each others.
Wow! Awesome piece. What type of wood is it?
Fantastic
I never seen the canister removed. Heat treat didn't look hot enough but the file skated
chef's special
What would a knife like that sell for?
Magnifique !
Ein wunderschönes Messer, wenn leider das Muster kaum noch zu erkennen ist. Es ist für mich zu viel gewesen. Handwerklich kann ich nur den Hut ziehen...einfach wunderbar.
And where might I purchase your handiwork?
Aren't nails usually made from mild steel?
O que são essas lascas que saem ao ser pressionado?
Making steel from lots of little bits of all the same steel is patern welding, not " Damascus "
完美，加油🎉
Top😊
Do you sell any of the knives you create?
What are these Shells that fall off when pressed?
The flakes are called fire scale
tem uns parafusos de bombas de poço sapo que esses parafusos são feitos de um aço que permanece intocado mesmo depois de 5 a 6 anos no cloro sem derreter ou perde medidas tenta fazer uma faca ou adaga com esse material se não tiver o material posso te mandar ele pelo correio se você quiser tenta essa brincadeira
The pattern is to fine. Could not determine what I was looking at. To many twists.
nice
Blade is too thin , cutting edge is not hollow ground , how long does a blade forged from low carbon steel stay sharp , clanp it in a vise and try to bend it. Next time try using masonry nails they are high carbon steel or steel cable . I had a friend that forged knives from steel cable , much better than nails . I could tell by the sparks from grinder that you were using low carbon steel
You twisted it too much. The pattern was nearly lost.
👍 für den Algorithmus
Aren't nails made of low carbon or mild steel? Is it possible to harden it to the extent that is needed for a knife?
Not without adding carbon to it , and this forging did not add any extra carbon
There is no pattern to it
콘크리트못으로칼만들어주시오
Quanto vale
现在盒马玩的越来越溜了。看起来又换场地了啊
明年换，今年还在原来的地方
更新没原来快了，是不是订单做不完啊😂，恭喜生意兴隆😁
That knife is far from high quality
I am not sure I would be happy with the handle.
Что за порошок в начале видео?
Хороший шеф нож!
Nice work!