DLC is also available on BCGs who OEM for others, like toolcraft. It's not revolutionary or exclusive to price-gouged makers marking up toolcrafts with a different logo etched on them.
I’ve always used cryptic coatings BCG. Fantastic product and just stupid easy to clean too. I’ve run suppressed and unsuppressed on 16” and 18” barrel. No issues with it at all
SOTAR has a few videos discussing DLC and other coatings. DLC is a pretty good coating, easy to clean and durable but a lot of the companies who use it fuck up the tolerances of the bcg with the coating.
Easiest way to clean your BCG is with Aero Kroil and compressed air. I may completely disassemble the BCG once a year but have never had a problem with the gas key, gas rings, firing pin, ejector, extractor, or bolt. Just blast it off, wipe it down throughly, and lubricate. For lube I use synthetic motor oil mixed with Lucas red and tacky grease. I use this on all my guns. I leave it thick enough to stay in place but thin enough to smear flat on smooth surfaces. This holds up well especially on the charging handle and carrier. DLC, chrome, nickel boron, etc. are all easier to wipe off but I’m not convinced of their lubricity when dirty and or dry. Definitely not worth an extra $100 to me but to each their own.
I've found that with DLC and other similar "slick" like coatings that you have to use grease on all friction points. If you use thinner oil it's almost like it immediately is pushed away from all friction points and refuses to hang on to the bcg coating.
I'm of the same opinion. Seems like they just sling it off pretty fast. Phosphate will hold lube where it's needed or close enough it keeps moving back to the friction points with motion. No doubt it will clean up easier. One of the easiest BCG's to clean I've ever had was an old Low Mass VooDoo Lifecoat with the integrated gas key. It's blasted, nickel coated then has some PVD barrier on it over the nickel. Quick with a paper towel and it was good. I put no telling how many rounds on it and it still looks new. I'm running a chrome JP LMOS (3-gun rifle) right now but still have that VooDoo. Small Arms Solutions channel has a really good video on all the different coatings.
Oh it's good shit. Works great on endmills in the machining world. Also great to keep your nozzles alive if you 3d print any metal or fiber filled materials. Tool life. As far as milling, typically the dlc coated endmills are recommended for things that do not have iron in them. The bolt carrier is tool steel. The reciever is aluminum so..... I guess a high round count and dirt/abuse will tell you if it's worth it or not.
Dlc is nice but phosphate holds lubericant much better. I would worry much less about the coating and much more about wether the parts are withing proper spec. Most aren't.
The first bolt he had to hammer out of that poor gun was so sad. That is what happens when you do not clean your firearm. At some point it does not matter what coating a bolt has. The condition of you chamber and the bolt matter, keep them clean. It is really not that complicated. I have BCM and Colt bolts with thousands of rounds. I also have DLC Geissele bolt. They are all ''easy'' to clean because I clean them every time I shoot them.
How dirty was the rifle, to beat the cocking handle with a brick BEFORE you put the DLC carrier in it? You try to use it that dirty in a fight, you gonna die, brother....
I got the muzzle device made of inconell by Walker defense. That was the ticket! Looking thru the scope after busting off a round, no muzzle rise! I was eyeballing that bcg later when it came out. Might have to get one…
The only drawback with PVD (physical vapor deposition) coating is that they do not hold lubrication. Hard chrome bolt carriers are similar in that regard. Yes, they are slick but if they’d not polish the surface finish to the point where it’s a mirror finish they’d be better. These coatings are what is termed conformal coatings. The finished result will conform to the surface roughness of the material being coated. I’d like to take a bolt carrier assembly and notrocarburize it and then PVD coat it.
There's at least a couple of armorers in every state with a horror story about a Soldier who managed to strip that coating. Because even though it would pass a WHITE GLOVE inspection, said Soldier's leadership insisted it was still dirty because they confused DLC with carbon residue (this is why desk pogs should NEVER be in charge of firearms turn-in). So when this poor soul finally turns the weapon in, the armorer tells them "Soldier.....you were supposed to clean the weapon not DEADLINE it!!!"
This stuff actually made its breakthrough as coating for end mills and drills in the CNC manufacturing world. My new G17 copy has a PVD coated threaded barrel, I'd much rather have that over black nitriding.
What was the initial problem with the bolt being stuck in the receiver? Was it rusted in place? Broken gas ring? Blown primer? Stuck empty case in the chamber?
I worked for a custom gun maker, and as a bonus one year, I got to build my own rifle on the company's dime. I titanium nitrided the action and the entire bolt before applying the DLC coating to both. I apply G-96 synthetic grease when I use the rifle. I have shot it in -30 with no issues; though I am not dumping 30-round magazines or cooking the barrel.
I’ve got a toolcraft DLC BCG in a rifle and it’s always easier to clean than my phosphates in other guns. I feel like the action is a little smoother too
PAMAX Tactical has a XSlick BCG i been using for a few years now and works great.. now, i want to compare these too.. i am gon have to look into this big time! i like this video!
I am useing a Lantac Enhanced that I polished than tumbled in a polish tub, than sent it off for gold TiN and it is amazing. Went 1200 rounds (400 suppresed) and just basicly whiped clean. dlc is great when done right.
The US Army tested ArmorLube, which is a version of DLC. Out of the 6 tests they performed, it matched phosphates in 2 tests, outperformed it by a modest margin in 2 tests, and saw FAR better performance in the other 2 tests. There were no tests where the phosphate outperformed the DLC. The US Army liked it so much that they added it to their spec sheet. It may not gauge as well as phosphate/chrome, but it absolutely has far greater benefits.
Oh cool, always wondered why griffin touted theirs as superior, never saw that factoid in any descriptions. Shouldve gone to their site I guess. Absolutely love their qd endplates. Next Level Armament makes a billet bcg almost completely out of 4140 as well as adding a dlc coating on top of that. Really nice profile too. Can catch em for a bill when they show up on dvor, quite a nice deal.
Check that claim: stainless steel versus carbon steel. Stainless stronger? I’d have to see the exact alloys and their hardnesses to determine if that’s true.
I agree 100% it is all in the post surface finish before DLC is applied. I have been using Cryptic BCG's for a long time due to this reason. They polish a ToolCraft BCG then apply a PVD finish. I shoot suppressed and all I need to do is wipe them off with a towel. The ONLY place on the BCG I have to scrub is on the back side of the bolt behind the gas rings.
You must realize it was your Charging Handle that was stuck, the BCG floated right out when you hit the CH. You then had to continue hitting the CH in order to get IT unstuck. Never seen anything like that before and I cannot figure what could have caused it.
Not how I saw it. Heck he missed the charging handle the next two times after the BCG came out. I thought I saw a round or case fly out when it broke loose or maybe part of the rock. RIfle seems to be running POORLY.
For the price difference I can have three bolts and a 5 gallon bucket of high temp grease. Thank you. Also, little devil on my left shoulder keeps telling me that shiny parts and defense weapons is not a good combo.
As far as cleaning goes they're all pretty much the same, blast the gun and bolt with hot water out of a garden hose or in the shower if it's turbo dirty and a q tip for small spots then grease it again, very quick
I love the sharps BCG with the reliabolt. Available with a DLC, but not a polished BCG like this one. Seems that with the slick surface, the carbon itself acts as an excellent lubricant, more so than on an unpolished BCG. That said... I'll stick with my Sharp's setup, as i already have them in all my ARs... which is a lot, lol. (Investments)
As someone who has both... what Bubba treated back alley nitride bcg did you find to compare DLC to?? DLC does clean easier, but a basic toolcraft nitride bcg that can be had for next to nothing, cleans far better than what it seems you're representing.
The Geissele REBCG is another extremely good quality option that uses a dlc coating. They call it their nano weapons coating and I think their overall process is proprietary but the end result is very similar. They come with the Geissele uppers. nice added feature.
Geissele REBCG, like many offerings, is a triumph of marketing over substance. They are not doing anything innovative and charging an extraordinary amount for you to experience it.
You know one brand that doesn’t get any credit is the sleeper brand Cryptic Coatings. They’re mystic black coating, I’ve never seen anything more luberous when dry than that.
Notice the blowback, and the gases going towards a shooter, and then take something like Hellion and put a suppressor on and try it,with or without suppressor.
When did they stop teaching you to stomp the charging handle with your foot to clear the jam? It had to be in the last 20 years according to this video.
Never heard of that. I learned the "baton" where you hold the charging handle while buttstroking the ground with the stock extended. That works loads better than banging on it with a rock! 😆
So why are you not reviewing a Cryptic coating mystic black bcg? 😁 It has a very low friction coefficient and has been used without oil in freezing temperatures.
I bought Fail zero with the nickel boron coating (6.8spc and 308) But I’m not sure keeps the BCG any cleaner. It’s a little easier to clean but not by much.
Nitriding is great if it’s the salt bath variety, if it gas nitriding like the new Glocks, it’s thin and porous and it can rust through, why do us like that Glock? That’s the reason they are still roughly the same price they were 25 years ago.
All the hype latly over 1/3 twist 8.6 when will someone try a pistol barrel in 1/3 twist with lehigh extreme line off solid coppers i bet the high twist makes them copper rounds extremely effective with the fluid dynamics
Using the dlc coated bolt first put more cabon inside the uppper reciever where it wasn't there before. Then when switching to the nitride BCG the upper was far more carboned up then it was when using the DLC BCG. Thats why you had malfunctions. Plus zero clp on the BCG. Not saying the DLC wasnt superior but not really a fair test. Try it the other way around in a clean rifle. Start with the nitride bolt clp'ed up then switch to the DLC.
The original is chrome. The USGI is parkerized. The former cleans faster than a father of five changing diapers. The latter holds the slippery stuff well, doesn't cost nearly as much, or rely on specification tolerances. Everything else is unnecessary.
How about doing a comparison of a Sionics NP3 impregnated BCG vs. the WDR DLC high-polish BCG? I have found the Sionics NP3 BCG to be superior to every BCG I have tired, including DLC, though I have not run a WDR. The Sionics is $40 cheaper and although it appears that it is not as high-polish, mine wipe clean with an oily rag. Carbon builds up on the tail of the bolt on all AR bolts, however, it is self-limiting and should never be scraped away on any bolt. I would love to see this head-to-head run, no pun intended.
I have 2 DLC bcg's. 1 is from Cryptic coatings and the other is from Sharps rifle company. The Cryptic coating DLC is a breeze to clean, the Sharps on the other hand is a royal pain in the a$$. The Sharps bcg isn't slick at all. I'm starting to think that Sharps thought that DLC stood for Dust Layered Coating Sharps -- Xtreme Performance Bolt (XPB) Carrier Group in DLC Cryptic coatings -- Mystic Midnight Steel BCG - .223 / 5.56 / .300 AAC Blackout
Personally, I care more about the or a bolt carrier being correctly spec’d. than any coating being on it. Because if can have whatever coating on it but if it’s out of spec or a part of it is, eventually it’s going to show signs of being out of spec.. Then said, what’s the price difference for one with a DLC coating compared to one that’s say, nickel boron finished.
@@steveninaz9576 Odd. All my shiney barrels and gas tubes reflect light. Pretty sure they're round. Also, he said "absorb," not "deflect," so there's that little thing, too, since the two are pretty much opposites.
With all due respect, @VSO_Gun_Channel chose the worst example of Nitrite BCG. Most Nitrite BCGs I've seen were almost as slick/shiny as DLC and are as easy to clean. It's all in the prep work before the coating/treatment. P.S. That said, DLC is better in most cases (if you can afford it).
DLC "Diamond Like Coating" is also used on Geissele's Enhanced BCG's, and A Staccato 2011 is also fully DLC. Pricey.
Geissele uses nano coating it’s a bit different but lead and steel arc’s come with dlc
Correction... " Diamond Like Carbon" is the coating.
@Roadking556 same thing different marketing
DLC is also available on BCGs who OEM for others, like toolcraft. It's not revolutionary or exclusive to price-gouged makers marking up toolcrafts with a different logo etched on them.
Zero issues with my ugri upper and BCG. Cleans easy and smothered in synthetic mobile 1 grease.
I’ve always used cryptic coatings BCG. Fantastic product and just stupid easy to clean too. I’ve run suppressed and unsuppressed on 16” and 18” barrel. No issues with it at all
Someone needs to send one into SOTAR for him to spec into oblivion.
Then we will know how much it sucks lol
SOTAR has a few videos discussing DLC and other coatings. DLC is a pretty good coating, easy to clean and durable but a lot of the companies who use it fuck up the tolerances of the bcg with the coating.
@@Caxel108 nickel coatings are even worse about that
I've got one of there titanium bcg and have been thinking about sending one to SOTAR.
He talks about the JP Enhanced DLC bolt in a couple of vids
Easiest way to clean your BCG is with Aero Kroil and compressed air. I may completely disassemble the BCG once a year but have never had a problem with the gas key, gas rings, firing pin, ejector, extractor, or bolt.
Just blast it off, wipe it down throughly, and lubricate. For lube I use synthetic motor oil mixed with Lucas red and tacky grease. I use this on all my guns. I leave it thick enough to stay in place but thin enough to smear flat on smooth surfaces.
This holds up well especially on the charging handle and carrier.
DLC, chrome, nickel boron, etc. are all easier to wipe off but I’m not convinced of their lubricity when dirty and or dry. Definitely not worth an extra $100 to me but to each their own.
I've found that with DLC and other similar "slick" like coatings that you have to use grease on all friction points. If you use thinner oil it's almost like it immediately is pushed away from all friction points and refuses to hang on to the bcg coating.
Makes sense. Lucas grease ftw!
You should use grease of friction parts. "Lube" oils are now meant for friction parts.
@steveninaz9576 depends on tolerance as well...I use grease on the AK because it works with lose tolerances...ARs stack tolerances more easily 🤔
I'm of the same opinion. Seems like they just sling it off pretty fast. Phosphate will hold lube where it's needed or close enough it keeps moving back to the friction points with motion. No doubt it will clean up easier. One of the easiest BCG's to clean I've ever had was an old Low Mass VooDoo Lifecoat with the integrated gas key. It's blasted, nickel coated then has some PVD barrier on it over the nickel. Quick with a paper towel and it was good. I put no telling how many rounds on it and it still looks new. I'm running a chrome JP LMOS (3-gun rifle) right now but still have that VooDoo. Small Arms Solutions channel has a really good video on all the different coatings.
@@mobilegamersunitetw 25b, clings better.
Oh it's good shit. Works great on endmills in the machining world. Also great to keep your nozzles alive if you 3d print any metal or fiber filled materials. Tool life. As far as milling, typically the dlc coated endmills are recommended for things that do not have iron in them. The bolt carrier is tool steel. The reciever is aluminum so..... I guess a high round count and dirt/abuse will tell you if it's worth it or not.
Dlc is nice but phosphate holds lubericant much better. I would worry much less about the coating and much more about wether the parts are withing proper spec. Most aren't.
Hello fellow SOTAR fan. Chad approves this message.
@@chiefro7 hail
The first bolt he had to hammer out of that poor gun was so sad. That is what happens when you do not clean your firearm. At some point it does not matter what coating a bolt has. The condition of you chamber and the bolt matter, keep them clean. It is really not that complicated. I have BCM and Colt bolts with thousands of rounds. I also have DLC Geissele bolt. They are all ''easy'' to clean because I clean them every time I shoot them.
@@tonyc223 hey clearly left it dirty as hell as a test. can u really trust your parts when they only work while clean?
@@tonyc223Geisselle does not use DLC, it’s different and I’ve verified this, what it actually is, I don’t know but it is the best coating I’ve tested.
How dirty was the rifle, to beat the cocking handle with a brick BEFORE you put the DLC carrier in it? You try to use it that dirty in a fight, you gonna die, brother....
I've got a couple of their titanium bcg and am really impressed with this company. Might have to get one of these with the new dlc
I've been running cryptic coating bcgs for a year, and they are ridiculously easy to clean.
The walker defense are good people definitely worth trying their stuff.
I got the muzzle device made of inconell by Walker defense. That was the ticket! Looking thru the scope after busting off a round, no muzzle rise! I was eyeballing that bcg later when it came out. Might have to get one…
The only drawback with PVD (physical vapor deposition) coating is that they do not hold lubrication. Hard chrome bolt carriers are similar in that regard.
Yes, they are slick but if they’d not polish the surface finish to the point where it’s a mirror finish they’d be better. These coatings are what is termed conformal coatings. The finished result will conform to the surface roughness of the material being coated.
I’d like to take a bolt carrier assembly and notrocarburize it and then PVD coat it.
There's at least a couple of armorers in every state with a horror story about a Soldier who managed to strip that coating. Because even though it would pass a WHITE GLOVE inspection, said Soldier's leadership insisted it was still dirty because they confused DLC with carbon residue (this is why desk pogs should NEVER be in charge of firearms turn-in). So when this poor soul finally turns the weapon in, the armorer tells them "Soldier.....you were supposed to clean the weapon not DEADLINE it!!!"
This stuff actually made its breakthrough as coating for end mills and drills in the CNC manufacturing world. My new G17 copy has a PVD coated threaded barrel, I'd much rather have that over black nitriding.
Who else showed up here just to find out WTF a DLC is? We already swim in a world of acronyms; what's it gonna hurt to add one more?
Pretty much no one who pays attention.
😂👆 Diamond-like Carbon... if I spelled it right. Prolly not. It was one of the first popular coatings.
Also... that looks like a KAK Bcg.
TLAs are important. (Three Letter Acronyms)
Diamond like coatings. Its been around longer than text talk.
What was the initial problem with the bolt being stuck in the receiver? Was it rusted in place? Broken gas ring? Blown primer? Stuck empty case in the chamber?
Honestly I lube my bcg not really to lubricant it but to make cleaning it alot easier and faster...
That's a lousy test, but the difference between them is so great that it still showed how much more easily the DLC was cleaned.
Thank you for actually loading amd tugging the mag, amd racking the handle, a true Yeager studemt likee 5x alumni 💯💯💯🇺🇸🇲🇽🇺🇸
Love my kryptic Ar10 DLC bolt. Slicker than slick
If they ever find a DLC that can resist freezing below zero temps, I'd be very interested in that.
I worked for a custom gun maker, and as a bonus one year, I got to build my own rifle on the company's dime. I titanium nitrided the action and the entire bolt before applying the DLC coating to both. I apply G-96 synthetic grease when I use the rifle. I have shot it in -30 with no issues; though I am not dumping 30-round magazines or cooking the barrel.
I’ve got a toolcraft DLC BCG in a rifle and it’s always easier to clean than my phosphates in other guns. I feel like the action is a little smoother too
Agreed.
Wait. Now rifles have downloadable content?
They always get you with the expansion packs.
😂😂😂
PAMAX Tactical has a XSlick BCG i been using for a few years now and works great.. now, i want to compare these too.. i am gon have to look into this big time! i like this video!
I am useing a Lantac Enhanced that I polished than tumbled in a polish tub, than sent it off for gold TiN and it is amazing. Went 1200 rounds (400 suppresed) and just basicly whiped clean. dlc is great when done right.
I'm not going to beat on any of my guns with a rock! When I spend thousands of dollars for a firearm I'm going to take care of it!
The US Army tested ArmorLube, which is a version of DLC. Out of the 6 tests they performed, it matched phosphates in 2 tests, outperformed it by a modest margin in 2 tests, and saw FAR better performance in the other 2 tests. There were no tests where the phosphate outperformed the DLC. The US Army liked it so much that they added it to their spec sheet.
It may not gauge as well as phosphate/chrome, but it absolutely has far greater benefits.
I'm a big fan of the HM DEFENSE bolt.
Same, they have awesome bcg’s
What makes a difference is that Griffin's make theirs out of STAINLESS STEEL BRO it's 50% stronger than 8620 steel
Oh cool, always wondered why griffin touted theirs as superior, never saw that factoid in any descriptions. Shouldve gone to their site I guess. Absolutely love their qd endplates.
Next Level Armament makes a billet bcg almost completely out of 4140 as well as adding a dlc coating on top of that. Really nice profile too. Can catch em for a bill when they show up on dvor, quite a nice deal.
Check that claim: stainless steel versus carbon steel. Stainless stronger? I’d have to see the exact alloys and their hardnesses to determine if that’s true.
What??? You better support that claim......
Cryptic coatings is so good
Bro I always thought you were trained,lol
I agree 100% it is all in the post surface finish before DLC is applied. I have been using Cryptic BCG's for a long time due to this reason. They polish a ToolCraft BCG then apply a PVD finish. I shoot suppressed and all I need to do is wipe them off with a towel. The ONLY place on the BCG I have to scrub is on the back side of the bolt behind the gas rings.
Id like to see Chad at SOTAR gauge it. Finishes/treatments are ancillary to the parts efficiency because of said finishes/treatments.
Hell yeah!! The buckeye state is the best state in murica 🤘
Was it gauged at all? Or are we just here for the dlc?
We’re just here for the qtip test, apparently, I’m convinced……….
I THINK HE LIKES 1ST PHORM…hard to tell 🤔
Would that BCG work in a stainless steel barrel with out getting jammed due to the material being dissimilar metal?
You must realize it was your Charging Handle that was stuck, the BCG floated right out when you hit the CH. You then had to continue hitting the CH in order to get IT unstuck. Never seen anything like that before and I cannot figure what could have caused it.
Not how I saw it. Heck he missed the charging handle the next two times after the BCG came out. I thought I saw a round or case fly out when it broke loose or maybe part of the rock. RIfle seems to be running POORLY.
Some people that didn’t pay any attention^^^
If you prioritize extreme durability, corrosion resistance, and a smooth, professional look, DLC is the top contender.
DLC and nitriding are nice on bolt actions as well.
It’s diamonds like coating, not diamond like carbon…. I’d choose the Geissele EBCG with the Carpenter 158+ bolt over this.
Chrome lined Phosphate is all you need
My BCM Bolt Carrier has been reliable shooting 10,000 rounds with no issues!!
Is this same as RF85???
For the price difference I can have three bolts and a 5 gallon bucket of high temp grease. Thank you. Also, little devil on my left shoulder keeps telling me that shiny parts and defense weapons is not a good combo.
As far as cleaning goes they're all pretty much the same, blast the gun and bolt with hot water out of a garden hose or in the shower if it's turbo dirty and a q tip for small spots then grease it again, very quick
I can see how it would make using the bolt catch easier. If the face of the bolt lugs amd bolt catch are slick, you can get some spicey reloads.
Cool stuff
Chrome plated was before phospate.
Mossberg pistols use DLC on the barrel and slide. Really nice pistols.
I have a Jacob grey DLC bcg it’s fkn awesome, too bad they discontinued selling them.
ROFLMFAO!! 1:36, Truest words ever spoken by someone who actually uses their gear
Cryptic coating has the best coatings. Wish they would do individual parts
How not to use a charging handle. 🤔
I love the sharps BCG with the reliabolt. Available with a DLC, but not a polished BCG like this one. Seems that with the slick surface, the carbon itself acts as an excellent lubricant, more so than on an unpolished BCG. That said... I'll stick with my Sharp's setup, as i already have them in all my ARs... which is a lot, lol. (Investments)
I'm just curious about what kind of life expectancy we can reasonably expect before this coating starts to deteriorate.
3:35 have you tried mortaring it?
Kinda hard to take him seriously when he apparently doesn't know about mortaring.
Wanted to be sure that I dropped the appropriate acronym the next time I'm down larping at my "lgs"...
As someone who has both... what Bubba treated back alley nitride bcg did you find to compare DLC to??
DLC does clean easier, but a basic toolcraft nitride bcg that can be had for next to nothing, cleans far better than what it seems you're representing.
What is the cost?
The Geissele REBCG is another extremely good quality option that uses a dlc coating. They call it their nano weapons coating and I think their overall process is proprietary but the end result is very similar. They come with the Geissele uppers. nice added feature.
Geissele REBCG, like many offerings, is a triumph of marketing over substance. They are not doing anything innovative and charging an extraordinary amount for you to experience it.
I’m not sure if it’s W DLC but it *IS* a PVD coating.
You know one brand that doesn’t get any credit is the sleeper brand Cryptic Coatings. They’re mystic black coating, I’ve never seen anything more luberous when dry than that.
@@DavidA20200 their mystic black is basically DLC.
@@aamp84it’s not I’ve have both
@ it’s a PVD coating the same as DLC. They simply polish the bcg before coating.
Notice the blowback, and the gases going towards a shooter, and then take something like Hellion and put a suppressor on and try it,with or without suppressor.
When did they stop teaching you to stomp the charging handle with your foot to clear the jam? It had to be in the last 20 years according to this video.
Never heard of that. I learned the "baton" where you hold the charging handle while buttstroking the ground with the stock extended. That works loads better than banging on it with a rock! 😆
So why are you not reviewing a Cryptic coating mystic black bcg? 😁
It has a very low friction coefficient and has been used without oil in freezing temperatures.
From my experience using carbide cutters coatings matter most when there is no lubrication at high temperatures.
I didn't know they were using this on bolts. I'm only familiar because Cold Steel uses this on their blades.
When you put those gloves on, I thought Brandon Herrera a.k.a. the Geico caveman was coming over for a prostate exam ha ha ha.
I guess old Rambo here never heard of mortaring his rifle. Here's an idea, go back to where you got started. The lab.
I loled at the deadpan gomer pile impersonation on that tailgate.
If you took better care of your tools you wouldn't have to beat the hell out it to attempt to charge it
Ive thought about getting a project pony rf 85 receiver set to try out
I tried KAK's enhanced bcg dlc coated... that went back to kak an from now on im going to try an stay with hard Chrome an microbest bcgs..
Heard KAK QC is been lackluster lately. Guess I’ll have to stick milspec BCM 😅
The nitride was 8 qtips dirty 🤣
My first thought was "down loadable content bolt carriers?. 3D printing has gotten that good?"
The other carrier looked like phosphate to me, not nitride.
I bought Fail zero with the nickel boron coating (6.8spc and 308) But I’m not sure keeps the BCG any cleaner. It’s a little easier to clean but not by much.
Nitriding is great if it’s the salt bath variety, if it gas nitriding like the new Glocks, it’s thin and porous and it can rust through, why do us like that Glock? That’s the reason they are still roughly the same price they were 25 years ago.
I think Radian does something similar with their BCG's.
Seems mostly like an item for the flex but that's ok too.
All the hype latly over 1/3 twist 8.6 when will someone try a pistol barrel in 1/3 twist with lehigh extreme line off solid coppers i bet the high twist makes them copper rounds extremely effective with the fluid dynamics
Using the dlc coated bolt first put more cabon inside the uppper reciever where it wasn't there before. Then when switching to the nitride BCG the upper was far more carboned up then it was when using the DLC BCG. Thats why you had malfunctions. Plus zero clp on the BCG. Not saying the DLC wasnt superior but not really a fair test. Try it the other way around in a clean rifle. Start with the nitride bolt clp'ed up then switch to the DLC.
I cut ceramics with dlc coated tools.
Hmmm looks like I'm going to have to add a 2x4 to my range bag.
Nitrate coating and DLC Coatings are better than the Magnesium phosphate
Downloadable Content?
Diamond like carbon
Nickle Boron is fine with me
@@TripleSuccotash1 I was, too. Then, Chad at School of the American Rifle schooled me. NiB is trash.
@@02BLACKTAWS6 for what reason
It's thick and can mess up crucial measurements within the bcg,
I like it enough to pay the extra money for it.
Nickel Teflon NP3 on a JPE stainell steel carrier
The original is chrome. The USGI is parkerized. The former cleans faster than a father of five changing diapers. The latter holds the slippery stuff well, doesn't cost nearly as much, or rely on specification tolerances. Everything else is unnecessary.
How about doing a comparison of a Sionics NP3 impregnated BCG vs. the WDR DLC high-polish BCG? I have found the Sionics NP3 BCG to be superior to every BCG I have tired, including DLC, though I have not run a WDR. The Sionics is $40 cheaper and although it appears that it is not as high-polish, mine wipe clean with an oily rag. Carbon builds up on the tail of the bolt on all AR bolts, however, it is self-limiting and should never be scraped away on any bolt. I would love to see this head-to-head run, no pun intended.
Chrome the way it was intended to be. Still the best.
I have 2 DLC bcg's. 1 is from Cryptic coatings and the other is from Sharps rifle company. The Cryptic coating DLC is a breeze to clean, the Sharps on the other hand is a royal pain in the a$$. The Sharps bcg isn't slick at all. I'm starting to think that Sharps thought that DLC stood for Dust Layered Coating
Sharps -- Xtreme Performance Bolt (XPB) Carrier Group in DLC
Cryptic coatings -- Mystic Midnight Steel BCG - .223 / 5.56 / .300 AAC Blackout
The cheapest coating, against the most expensive?
Why not run it against a good phosphate bcg?
I just got a noveske dlc enhanced bolt for my poor mans diplomat build. Glad i didnt waste 300 dollars.
Personally, I care more about the or a bolt carrier being correctly spec’d. than any coating being on it. Because if can have whatever coating on it but if it’s out of spec or a part of it is, eventually it’s going to show signs of being out of spec..
Then said, what’s the price difference for one with a DLC coating compared to one that’s say, nickel boron finished.
NLNG non latex nitrile gloves
do the same with anderson rf-85
cleaning is not the focus of my systems... reliability is paramount.
I'm cool with my Nitride coating, I'll just buy more Q tips 😂
2:52 Doesn't shiny *reflect* light?😉
On a round surface, it deflects it, making it look dark.
@@steveninaz9576 Odd. All my shiney barrels and gas tubes reflect light. Pretty sure they're round. Also, he said "absorb," not "deflect," so there's that little thing, too, since the two are pretty much opposites.
With all due respect, @VSO_Gun_Channel chose the worst example of Nitrite BCG.
Most Nitrite BCGs I've seen were almost as slick/shiny as DLC and are as easy to clean.
It's all in the prep work before the coating/treatment.
P.S. That said, DLC is better in most cases (if you can afford it).