Chucky Episode 15 : Nitrous System Install!

It's finally time! In this episode we get started on Chucky's Nitrous Express plate kit install to give Chucky a nice 100+ RWHP increase. Tune in to the next episode to see how much faster we made Chucky with the newest mod!
Want more Chucky videos? Be sure to tune in every two weeks (on Wednesday) to see what we do next!
Mods on Chucky include:
✪ VMP Custom Tune: bit.ly/19-June-PP-61919-YT-Tex...
✪ Nitrous Express Plate Kit:
✪ 2018 Ford Mustang Intake Manifold: bit.ly/19-June-PP-61919-YT-Tex...
✪ Dynatech High Flow Cats: bit.ly/19-June-PP-61919-YT-Tex...
✪ Dynatech Headers: bit.ly/19-June-PP-61919-YT-Tex...
✪ JLT Cold Air Intake: bit.ly/19-June-PP-61919-YT-Tex...
✪ 6R80 Transmission with VMP Bullet-Proof 6R80 Kit : bit.ly/19-June-PP-61919-YT-Tex...
✪ FTI Torque Converter : bit.ly/19-June-PP-61919-YT-Tex...
✪ UPR Lower Control Arm Relocation Bracket Kit : bit.ly/19-June-PP-61919-YT-Tex...
✪ UPR Adjustable Upper Control Arm Mount : bit.ly/19-June-PP-61919-YT-Tex...
✪ Mickey Thompson ET Street Radial Pro Tires : bit.ly/19-June-PP-61919-YT-Tex...
✪ VMP Oil Change Kit : bit.ly/19-June-PP-61919-YT-Tex...
✪ VMP IMRC Lockouts
✪ 56 Lb Injectors
Want to see more videos like this? Let us know your suggestions in the comments below!
--------------------------
Have you seen our shows?
Tune in each week for:
✪Tuning Tuesday | Tuesdays at 1:30 PM EDT
✪Burnout Box | Thursdays at 1:30 PM EDT
-------------------------------------------
Subscribe & Follow:
►TH-cam: bit.ly/VMPSubscribe
►Facebook: bit.ly/VMPFacebook
►Instagram: bit.ly/VMPInstagram
►Website: vmpperformance.com

[@VMPPerformanceTV]

What do you think Chucky will run at the track with the Nitrous Express Kit?! post in the comments below your guess

[@NITROUSnBIASPLYS]

VMPPerformance with 100% hit and not a progressive shot. If it hooks and pulls a 1.6 60’
I’m going to say 11.0@122mph

[@Boss302ATC]

Brings me back to my fox body days. Ran a 250 plus wet shot through their amazing nozzles on a 30 over 302 with pistons, everything else stock including intake manifold, and 1 5/8 shorties. Flat out ran, high 11s and 117 mph.

[@thesquirrelchroniclesakare7808]

Damn!!!! Why not just finish the install ? What if I were following the instructions ? Now we gotta wait

[@slrr123]

Considering I’m a S197 guru you could’ve ran the feed line through the smart logic wire grommet on the firewall and go under the carpet at the seat harness hole to give it a way cleaner look without the chance of the line getting snagged by something on the track unlike going under the car in the video. Running it through there gives it a hidden look and protected location behind the splash shield going into the engine bay.

[@stratsteveo106]

That's how I always try to run them. The holes are there, its clean and looks better.

[@WastdTrashPanda]

Good shit!

[@alihassan-do5td]

We want more about nitrous coyote pls

[@VMPPerformanceTV]

We'll be posting more info when it comes available. Stay tuned for more Chucky episodes!

[@NITROUSnBIASPLYS]

Hammer down, spray that high miler. Rings are gapped mint!

[@valdo_s1975]

Does this plate fit a 90mm opening manifold and throttle body?

[@NITROUSnBIASPLYS]

My thumbs get sore from twiddling them waiting for 2 weeks between episodes 🙈🙉🙊

[@DikeLover]

How much spray can my 2014 coyote take, it’s already fbo e85 with Ben calimer stage 2, 100?

[@jeremyeubanks2387]

Does nitrous outlet and nitrous Express use the same bottle valves ... my nitrous outlet one looks just like that one

[@Josefrancisco1224]

It’s this the same install for the 2017 mustang gt

[@SR-oh6fn]

Where can I buy this

[@lx347cid]

11.50 @ 123 with the 100 shot

[@NITROUSnBIASPLYS]

Which nitrous controller is that?

[@utahcountypicazospage5412]

Why not race a low boost vmp supercharged car and see what the outcome looks like to give people a comparison I’m sure you guys have plenty of cars to choose from then do a 150

[@rsl6767]

Step 1, mess up your feed tube orientation by point the gauge at you.. watch later deleted

[@mr.roush6709]

11.3 in 1/4

[@MTEIsrael]

Which kit is this? Is everything in the video what it comes with?

[@vencd4010]

Did you ever find your answers?

[@LEGOCAMARO]

Don’t forget to see what’s underneath before you drill haha. fuel line, brakes something

[@andrewmontgomery1763]

He literally says that lol

[@414pyro7]

Can u do a 75 shot shot with this kit?

[@VMPPerformanceTV]

Yes, this particular kit is good from 50hp-200hp.

[@superslacker6152]

10.9 @123

[@brianneal9204]

What is the point of this car? Seems like you're building another race car. If so, why is the rest of the interior and other unnecessary weight still in the car? What new information are we learning by all of this being done? I'm just not sure what's happening and why it's happening

[@jasonvanderheyden3577]

I agree 100% building a race car kinda defeats the purpose

[@VMPPerformanceTV]

To get the most out of the NA set-up we took as much weight out of Chucky as possible on a previous episode. We wanted to keep it possible to daily, so that’s why we didn’t take the carpet out. We can put the interior bits back in when we eventually go to one of our supercharger set-ups.
The point of Chucky is to show that you don't have to immediately spend a lot of money on a power adder to have fun at the track. Buying the supporting mods first helps you learn the car and progressively get faster over time.