We were on our way from Norfolk County Ontario to Letchworth and my 03 Yukon Denali made it a mile from home and died. The ground at the back of the block came off. It must be the one that goes to the ecm because everything went nuts on the cluster and no crank. Was going to visit you shop too just for fun. Although this video didn't help, I've found lots of useful repair advice for the old boy. Thanks for all your videos,
Same problem I’m having with a suburban I have at the shop eventually turns on but has the same symptoms no windows abs lights on and no crank I figured it was a going body control module but this helped confirm it thank you keep up with the videos
Great video, sounds like the problem I have with mine. The only thing the car he’s working on is a Taho not a Yukon unless he changed the steering wheel. There’s a Bowtie on it not a GMC emblem. But it’s the same.
@@brianweck9474 That is usually an issue with the transmission range sensor. The vehicle will not start if it does not know that it is in park or neutral.
So I currently have this same issue with my 2008 Escalade. First I replaced the PCM didn't do anything, now I'm been told it's the fuse box under the hood. But I'm questioning it because when all the fuses are been checked they're all lighting up. If the fuse box is not good would the fuses light up??? When placed on code reading machine nothing comes up. It's like not even "talking" to the code reader... HELP!! 😅
I have the same issue on my avalanche I changed the entire fuse box and it didn’t help, I’ve ordered a reprogrammed ecm/pcm/ecu but if that doesn’t fix it I’m going to change the bcm.
Did you have to have the used BCM programmed with the vehicle VIN number or not? I get mixed answers on this. Mine is out and needs another one but can get a used one for $45 or one for $185 that is programed to the VIN of my vehicle. But if I don't have to get it programed to VIN then I'll buy the $45 dollar one.
Master ung sa indicator comand ng shifting mo ! Shift mo drive master may napapasin ka panel board master para alam nila kung saan nag shift! Base sa akin my shorted ang tcm mo ! Oarati dito ganyan issue sa amin garage gm us mostly ganyan
@@pinoygarageTV26 so if I get a second hand BCM that means that It doesn't need to be reprogrammed to the truck? Sorry I am getting a little bit confuse
What is he doing? I mean we all can touch and feel shit?How can you say you fixed it when you never did anything? The computer should of said that before you even went on your search? 🤔
We were on our way from Norfolk County Ontario to Letchworth and my 03 Yukon Denali made it a mile from home and died. The ground at the back of the block came off. It must be the one that goes to the ecm because everything went nuts on the cluster and no crank. Was going to visit you shop too just for fun. Although this video didn't help, I've found lots of useful repair advice for the old boy. Thanks for all your videos,
Same problem I’m having with a suburban I have at the shop eventually turns on but has the same symptoms no windows abs lights on and no crank I figured it was a going body control module but this helped confirm it thank you keep up with the videos
Great videos it helps like me knowing just drive no clue what is inside cars.Support from ponyswedman
Was it the module cus I’m having the exact same problem on my 2007 ltz silverado
@@Jerry_autosprayzone yes it was the module
@@eljeferyek may I ask where u purchase ?
@@Jerry_autosprayzone dealer has em
Dude...What's the point? Putting forth a little more video effort would be nice. It was painful to follow.
Great video, sounds like the problem I have with mine. The only thing the car he’s working on is a Taho not a Yukon unless he changed the steering wheel. There’s a Bowtie on it not a GMC emblem. But it’s the same.
Amazing work friend you know everything about cars 👍 from mary lou
Does anyone else notice the gear indicator is gone as well when this happens
Same issue I have 07 escalade. Anyone find a solution?
Same
@@brianweck9474 That is usually an issue with the transmission range sensor. The vehicle will not start if it does not know that it is in park or neutral.
I've mostly seen it when the transmission module isn't communicating therefore it doesn't know what gear it's in
Awesome!Your videos are very helpful. Thank you for sharing.
So I currently have this same issue with my 2008 Escalade. First I replaced the PCM didn't do anything, now I'm been told it's the fuse box under the hood. But I'm questioning it because when all the fuses are been checked they're all lighting up. If the fuse box is not good would the fuses light up??? When placed on code reading machine nothing comes up. It's like not even "talking" to the code reader... HELP!! 😅
I have the same issue on my avalanche I changed the entire fuse box and it didn’t help, I’ve ordered a reprogrammed ecm/pcm/ecu but if that doesn’t fix it I’m going to change the bcm.
Si te funcionó amigo?
Maraming salamat po Sir!
Ingat palagi Sir. GOD BLESS YOU
How did a new bcm work withiut programming it ?
Did you get the BCM programmed to this truck? Or is it reading the vehicle it was taken off of?
AMAZING TROUBLE SHOOT FR KEN
Dito nalng aq mag tamsak mego musta na
Ito po ang dapat matutunan ng mga driver lalo na kung nasiraan sa daan
Salamat sa info idol....sana lahat makapanood nito..see unaround....bing
Did you have to have the used BCM programmed with the vehicle VIN number or not? I get mixed answers on this. Mine is out and needs another one but can get a used one for $45 or one for $185 that is programed to the VIN of my vehicle. But if I don't have to get it programed to VIN then I'll buy the $45 dollar one.
Hello po kabayan ingt po sa work dyn .done
Saludo gracias por el aporte al fin cual era la falla el modulo control
Hello.my friend sending my support. Well done . God bless. Changzkie.
Thanks for visiting
Very helpful!
Just watching keepsafe
I changed the ecu on mines still having issues haven’t changed this part
Thank you for sharing this video new friend here👍👍👍done
What made you replace? Vehicle just stopped running?
Engine won't crank with ignition switch
Master ung sa indicator comand ng shifting mo ! Shift mo drive master may napapasin ka panel board master para alam nila kung saan nag shift! Base sa akin my shorted ang tcm mo ! Oarati dito ganyan issue sa amin garage gm us mostly ganyan
Ganun po pala ang ginagawa, galeng naman po
Ang ganda ng yukon brand ng car marylou
Wow galing naman yan idol.....
Thanks for sharing ideas how to fix the problem in the car - #elma
Sending lab and support stay connected from Mary Lou tare
great content
possible din na walang ground ang BCM,
Hello my friend 🌹🌼🌹🌼🌹👍🏼💯👍🏼💯🙋🙋🙋🙋🙋💖
Thanks for visiting
Salamat sa kaalaman. Sama tribe po
Hello quick question ! did you have to program me the BCM? If it yes how do you do it?
I just installed a second hand BCM with the same unit
@@pinoygarageTV26 so if I get a second hand BCM that means that It doesn't need to be reprogrammed to the truck? Sorry I am getting a little bit confuse
@@pinoygarageTV26 thanks for replying
@@pinoygarageTV26 so it does not need to be reprogrammed it will be like a plug and play??
@@brandoperez1313 thats the way i do
Do you have to get it reprogramed??
I just installed the same unit
Done watching,no crank no start,keep safe po,#gina
Godbless po sa iyo.. keep on vlogging
Where is your location plz?
Galing nmn po
I wish you turn that instrumental off so we can hear what you doing
excellent
Nice info
Sending full support here.
I have same issue I scan The Vehicle Came With Code P1516 any Comments Will be appreciate
throttle actuator control
@@pinoygarageTV26 Thank you for your faster response..I Will order One at the auto parts..Once again Thanks Hope my old Truck be back to life..Thanks
Tamsak po host
Sending full support idol from buyang
What was the problem
BCM body control module
nice video fr. Marylou vlog
Hello idol bagong kaibigan frm liza
What is he doing? I mean we all can touch and feel shit?How can you say you fixed it when you never did anything? The computer should of said that before you even went on your search? 🤔
Nice
support here host.ineng
Good job po from ponySwedman
Laro lahat idol para sa mga seni mo
Tamsak done godbless..
No computer obd no starter
3 latop nka laro lahat idol sana.pasok lahat
Good job 👏
full support
gina flores
hi, hirap pala ang trabaho ng mekaniko.
No ví que le hiciste
Did you have to get bcm programmed?
I’m having this same trouble with my 07
crank no start? im having the same problem suburban been in the shop for months
@@rodneygreen5855 i just got mine fixed 5 min ago i bought a pcm from junk yard and had someone come program it
Bcm* sorry
@@249pablo pcm or bcm?
Tamsak Mary lou tare
Keep good working #pony
Did you watch what you recorded need to it was a waste of time
yo se cual es ese taller, ese es el taller del mudo, el te explica bien todo lo que hace, para la oreja, a menos que seas sordo.
Sir may ganyan din ako problem kaso may indicator yun shifting light nys s dushbo
Naayos nyo po ba
@@pinoygarageTV26 dko p naayos problem ko nga po
PAadd po sa fb Rafael galsim junio
Sana matulungan nyo po ako
Salamat po
#mary Lou vlog tare
Hahaha ! Kita kuna agad ung sera kaht hindi na ako magkalkal ! Shitft P R D 2 1 no shit indicator on panel board
good bless po sa inyo
from gina flores
#pony
Galing
Check your 2 Amp fuse under hood
Just junk it
Tamsak po host full support