You can work as a wood-officer, not like a woodworker with wood-dust, sweaty and clutter of tools and plenty of wood pieces on the floor. Professional for everything. I can image you did all in a workshop equipped with full A/C. I admire of that. 👍😍 I did the same project few months ago with second role as i mentioned above (amateur woodworker) 😂
Merci! Plusieurs personnes ont exprimé leur aversion pour la musique et je promets que je n'utiliserai cette musique pour aucune de mes vidéos à l'avenir hahaha
I have taken only 1 woodworking class when I was in middle school. Majority of my experience come from trial and error :) it is important to understand each tool’s capabilities, and more importantly, I’m what ways can the tool cause accidents. Understand this will help in making a safer working environment. You can do it!
Very well Done. is the tabletop panel bought from home centre as it is? As for the walnut wood, it looks very nice but wonder how you get them jointed and planed? Do you have such tools at your workshop?
yup, the top was bought from Home Depot, then I sanded it and applied 3 layers of polyurethane. The walnut, some had holes which I filled with resin + black coloring, then planed them flat :)
@@getthingsbuilt1342 nope, I don't have a jointer :) so I tend to avoid boards that has a very bad bow or twist, but we all know that's not possible to completely avoid them :) so when I have a board that has a bow or twist, I place the material on top of a known flat piece of board (usually MDF); I then add shims from bottom to make sure the material does not have any wobble when resting on the flat board. this way, when I run the material through the thickness planer, the material will end up having the top side absolutely flat. Now with the new flat side as my reference, I simply flip over the material and run the other side through the thickness planer to get that side flat as well :)
@@DingsWorkshop well explained. How effective is this? I’d recon it is more effective for longer piece but less for short piece? Maybe I am wrong. I also thinking it is maybe relatively practical for hardwood pieces as they are in a better condition( normally ). But for construction lumbers ( apparently we all use a lot), they normally in a pretty bad shape so that we had to joint them and plane them every time we use them if we want to be precise.... I don’t have either a planet or jointer but want to know what to buy next. If I need buy both or can simply buy a planer using your method. I had some very bad experience using the construction lumbers without planing and jointing and the table I made out of them is a disaster
@@nickharvey1648 so based on my experience, the thickness planer + shim trick works pretty well. And I'd even say it works better on shorter material vs longer ones (mostly because shorter material only needs shorter flat board as the base). Of course the best situation is to have both thickness planer and a jointer, but frankly, I've heard many people say the jointer is probably the last tool you need to buy in your woodshop, because there are many ways to make a flat surface on lumber :)
Beautiful design and you make this look so easy. Question. What is the finish of the desk top? Is it a veneer or finish? Been looking to add furniture pieces to an existing furniture but can’t match or find the color/style but it’s exactly the same color/finish as your desk top. Thank you.
DIY with Heavy Machinary... I see DeWalt every where.... Appears to a sponsored video... If not then speak to them and get some share from their marketing budget.... Cheers
@@DingsWorkshop Well I'd still suggest to check with DeWalt for sponsorship... With the valuable time spent doing video... And with such high viewership there should be some monetization from the company too... Cheers. I super liked the desk prepared, iland would like to have one for Covid WFH.
Hello! These are the drawer slides I used: amzn.to/3tJaMwP happy building! In case you didn't know - I included my plan in the video description. Free to download :)
actually, I did not include my plan in the description, but here's the link for my plan: drive.google.com/drive/folders/105xSWGjEnQtw6UqR3PSkJ77U6dfjHYUa?usp=sharing
esses pesinhos de 1cm embaixo do apoio da mesa me pergunto o quanto são úteis. Eu acho que perde a estabilidade da mesa, vai ficar dançando horizontalmente mais fácil
If I had the space, tools, materials, I would make my own, but, since I can only buy materials, there's no POINT in buying materials only - it'd make more sense to get someone else to make it. I need a better solution for my PC desk as my current one requires a custom fitting unit - EVERY affordable option, well, they're not an option since none of them would ever fit (the space I have) properly. :(
HI! I'm not sure what lid is...but the top is 74 inch x 25 inch, 7 inch x 16.375 inch. Here's my plan, you can have for free: drive.google.com/drive/folders/1dq867253HfJ39-WrkmlgVbD2YZcqxrFV?usp=sharing the plan is done using SketchUp so you can open the 3D file for other measurements as well. Cheers!
Thanks Xiaotian! I got majority of the materials for these projects from Crosscut Hardwoods in Seattle. Their address: 4100 1st Ave S, Seattle, WA 98134
You don’t need a lot of high cost tools to do DIY. The high cost tools simply allows an individual to do a task faster than using hand tools. Thus it shall be considered as spending money to buy time, which is a very good deal :)
You made this build look effortless! The design is so simple and modern, I love it!
I like the cleanliness of your workshop especially the floor is clear of wood dust!
Hi Ding, 谢谢你的分享, 受益良多。能不能开一期视频，专门讲一下木材材料。最近想帮孩子们做loft bed, 和户外cubby house 但不知道用什么材料才安全呢。谢谢
Hi Vincent, 谢谢你的建议！ 做 loft bed，建议考虑 maple, walnut, oak, poplar。 给孩子做东西，要注意躲避使用化学处理过的木料 (untreated)
@@DingsWorkshop 谢谢回复。你的视频让我受益匪浅，我是刚刚入坑的新手。期待你的分享。
Hi, what was the thickness and width of the left foot, what is 2" of 3-4" thick and 3" wide at 5:25 ?
Thanks
came for the desk, amazed by workshop
Hi, awesome work. Would you please state the dimensions of the table?
Amazing wood working Crafts DIY...
Im about to build a pc desk on my own. With 89% humidity on my area, will I get a warped table top if I dont install a c channel?
quite a fine craft wish it for sale. Excellent craftmanship.
Thank you for the compliment!
You brilliant bro… Simple, creative, modern design with a master touches… peace
Thanks!
I love your tools collection
话说领导可以批准升级一下三脚架，怎么给桌面上螺丝画面也会抖啊
当时应该是三脚架的一个脚在frame里面...手机录像就是这点，焦距太短
Very similar to DFR Workshop, nicely done
You can work as a wood-officer, not like a woodworker with wood-dust, sweaty and clutter of tools and plenty of wood pieces on the floor. Professional for everything. I can image you did all in a workshop equipped with full A/C. I admire of that. 👍😍
I did the same project few months ago with second role as i mentioned above (amateur woodworker) 😂
thanks for the compliment!
Those cabinets are fireeee ❤️ Really nice.
太棒了！各种工具飞舞！7:34的那种转头叫什么名字？
那个是countersink drill bit
沉孔钻
Superbe boulot, j'adore, par contre la musique..... change s'il te plait!
Merci! Plusieurs personnes ont exprimé leur aversion pour la musique et je promets que je n'utiliserai cette musique pour aucune de mes vidéos à l'avenir hahaha
How many days did it take you to do this project from start to finish?
4 days. I vividly remember making both pieces during Labor Day long weekend, plus 1 extra day
ap Jo iron se Laga rhe Hain ye kya h
i like video .i always learn your videos
Can you make gaming chair???
it looks nice, do you mind sharing the plan?
Ok it’s been a while but do you know the general cost of all of the wood
请问您的dewalt brad nailer是18gauge的吗？是不是这个size的做木工最有用？
对，是18 gauge的。和我16号的相比，18号的确实用的更多。
I love woodworking but in my country k cant get woodworking schools and also equipments
I have taken only 1 woodworking class when I was in middle school. Majority of my experience come from trial and error :) it is important to understand each tool’s capabilities, and more importantly, I’m what ways can the tool cause accidents. Understand this will help in making a safer working environment. You can do it!
真不错外观时尚大方，
谢谢！
請問你貼皮會不會有甲醛，為什麼不直接都塗poly wipe-on?
我用的贴皮，它自带的热胶。但我不知道有没有甲醛。我喜欢在上poly之前涂一层stain, 可以让木头的纹路更好的显现出来
Awesome job. what is the size of the desk?
Thanks! It’s 74” wide, 31.5” tall and 25” deep
That's beautiful! Nicely done.
Thanks for teaching!!! I learn a lot. God bless you more!!! Blessings from Mexico
Seattle people what a beast
What does calls these type of wood?
the side panels are white oak plywood. the drawer plates are solid walnut. table top is birch
This is the most technological wood furniture taller
请问有没有哪种比较推荐的WoodStain? 希望是那种没有什么味道的。前一段时间买了油性的woodstain，味道一直很难散去，感觉很伤身体。
我用过的wood stain大多味道都很大。不过如果只是想显现木纹，而不是变色的话，可以用一些天然的东西比如beeswax, 核桃油之类的
what's the dimension of the cabinet and the desk leg?
Very well Done. is the tabletop panel bought from home centre as it is? As for the walnut wood, it looks very nice but wonder how you get them jointed and planed? Do you have such tools at your workshop?
yup, the top was bought from Home Depot, then I sanded it and applied 3 layers of polyurethane. The walnut, some had holes which I filled with resin + black coloring, then planed them flat :)
@@DingsWorkshop so you don’t have a jointer? How to remove the bow or cup or twist?
@@getthingsbuilt1342 nope, I don't have a jointer :) so I tend to avoid boards that has a very bad bow or twist, but we all know that's not possible to completely avoid them :) so when I have a board that has a bow or twist, I place the material on top of a known flat piece of board (usually MDF); I then add shims from bottom to make sure the material does not have any wobble when resting on the flat board. this way, when I run the material through the thickness planer, the material will end up having the top side absolutely flat. Now with the new flat side as my reference, I simply flip over the material and run the other side through the thickness planer to get that side flat as well :)
@@DingsWorkshop well explained. How effective is this? I’d recon it is more effective for longer piece but less for short piece? Maybe I am wrong. I also thinking it is maybe relatively practical for hardwood pieces as they are in a better condition( normally ). But for construction lumbers ( apparently we all use a lot), they normally in a pretty bad shape so that we had to joint them and plane them every time we use them if we want to be precise.... I don’t have either a planet or jointer but want to know what to buy next. If I need buy both or can simply buy a planer using your method. I had some very bad experience using the construction lumbers without planing and jointing and the table I made out of them is a disaster
@@nickharvey1648 so based on my experience, the thickness planer + shim trick works pretty well. And I'd even say it works better on shorter material vs longer ones (mostly because shorter material only needs shorter flat board as the base). Of course the best situation is to have both thickness planer and a jointer, but frankly, I've heard many people say the jointer is probably the last tool you need to buy in your woodshop, because there are many ways to make a flat surface on lumber :)
Nice one. Any link for complete project measurements?
Here is the plan I made using SketchUp. Feel free to download: drive.google.com/drive/folders/105xSWGjEnQtw6UqR3PSkJ77U6dfjHYUa?usp=sharing
Ding's Workshop cool thank you 😃
Desk Dimensions?
Muy bonito mueble amigo un saludo
Gracias amigo!
Excellent work congratulations !!, a query what type of router bit do I use to make the lids of the drawers?
I used 3/4 inch straight bit
Beautiful work. I’m new to woodworking. What kind of router bit did you use?
Hello! It was a 3/4" straight bit :)
Beautiful design and you make this look so easy. Question. What is the finish of the desk top? Is it a veneer or finish? Been looking to add furniture pieces to an existing furniture but can’t match or find the color/style but it’s exactly the same color/finish as your desk top. Thank you.
Thanks! The top is solid wood butcher block finished with polyurethane
جميل صراحة إبداع😍❤👏👏👏👏
Nice desk. Do you have plans available for purchase?
Here you go my friend, you don't need to pay me anything. drive.google.com/drive/folders/1dq867253HfJ39-WrkmlgVbD2YZcqxrFV?usp=sharing
Thanks!
赞赞赞，期待更多作品：
Hộc tủ di động này ngăn kéo làm bằng gỗ sồi hay óc chó thế ad. Nhìn thợ làm thích quá.
Beautiful work my friend!!!
Nice work, I like the wood combination and the simple design of the walnut leg.
请问kreg那个黄色bit的tool叫什么？
哪个bit呀？
Muito bom, faltou só o "yourself" do do it.
DIY with Heavy Machinary... I see DeWalt every where.... Appears to a sponsored video... If not then speak to them and get some share from their marketing budget.... Cheers
Not sponsored. The reason why you saw dewalt everywhere is because that’s the only brand of batteries I have :)
@@DingsWorkshop Well I'd still suggest to check with DeWalt for sponsorship... With the valuable time spent doing video... And with such high viewership there should be some monetization from the company too... Cheers.
I super liked the desk prepared, iland would like to have one for Covid WFH.
What finish did you put on the white oak side panels?
I used natural wood stain + 3 layers of polyurethane
awesome, i like this woodworking
胶水，夹子，西式木工的灵魂啊
没啥灵魂不灵魂的。重要的是把东西做出来就行了 :)
Beautiful build.
But the music is a little annoying
Fantástico abraços aqui do Brasil 🇧🇷
Good quality and nice, thank you so much
I just bought the plywood for this project. I’m excited to get started. Which door slides did you use?
Hello! These are the drawer slides I used: amzn.to/3tJaMwP happy building! In case you didn't know - I included my plan in the video description. Free to download :)
actually, I did not include my plan in the description, but here's the link for my plan: drive.google.com/drive/folders/105xSWGjEnQtw6UqR3PSkJ77U6dfjHYUa?usp=sharing
@@DingsWorkshop Thank you for the link for the drawer slides and your sketch up plan. It’s been very helpful.
Felicidades!! Te quedó hermoso
¡Gracias por el cumplido!
What is the little red jig in your hand that you were using to trim off the edge-banding?
It's a edgebanding trimmer with tungsten blades. This is the one I bought: amzn.to/2JfmdKZ
Neat Clean Beautiful
你的棕色木头在哪里买的啊？home depot 有吗？
棕色的是walnut, 是在西雅图这边一家叫做Crosscut的木材店买的
有些 Home Depot 也有的，但选择不是很多
按尺卖的，可贵了。。。
i like . god job
Great job sir
esses pesinhos de 1cm embaixo do apoio da mesa me pergunto o quanto são úteis. Eu acho que perde a estabilidade da mesa, vai ficar dançando horizontalmente mais fácil
Nice
请教一下，学木工需要什么特别能力，儿子十八岁在加拿大温哥华想知道学木工难吗？
我觉得兴趣，信心，小心。这三点是很重要的软项要求。对木工有兴趣，并且有信心来进行不断的尝试和经验的积累，再加上小心使用工具。
@@DingsWorkshop 谢谢，在国外人工贵，干什么都缩手缩脚
hello, I am very interested in this table, I want to make one myself, can you give the exact dimensions of all the details? I will be grateful to you!
Greetings! Here is the plan I made using SketchUp. Feel free to download: drive.google.com/drive/folders/105xSWGjEnQtw6UqR3PSkJ77U6dfjHYUa?usp=sharing
Good job 👍👍❤️❤️❤️
مجهود رائع 🤗
Nice work 😀😀👍👍👍
MAchines wow...
Its nice
The tools❤🔥
If I had the space, tools, materials, I would make my own, but, since I can only buy materials, there's no POINT in buying materials only - it'd make more sense to get someone else to make it. I need a better solution for my PC desk as my current one requires a custom fitting unit - EVERY affordable option, well, they're not an option since none of them would ever fit (the space I have) properly. :(
Hi! Great job! I wanted to ask, how much does such a table cost?
Material wise probably $500-600ish? The walnut are the expensive pieces
@@DingsWorkshop Thanks for the answer! I wish you creative success!
这五斗柜是真的漂亮.拉手很赞
要是能听到锯子的声音就更好了
博主在澳洲吗？能预定小抽屉吗
我在北美
Muy fácil genial
¡Gracias!
very nice!
Amazing
Size about ?
74" wide, 31.25" tall, 25" deep
amazing sir
求问这个table top哪买的
Home Depot :)
太漂亮了！
hello could you give me the dimensions of the lid and the drawer?
HI! I'm not sure what lid is...but the top is 74 inch x 25 inch, 7 inch x 16.375 inch. Here's my plan, you can have for free: drive.google.com/drive/folders/1dq867253HfJ39-WrkmlgVbD2YZcqxrFV?usp=sharing the plan is done using SketchUp so you can open the 3D file for other measurements as well. Cheers!
Hi Ding, thanks for sharing your project, do you mind sharing where you get your lumber in Seattle area?
Thanks Xiaotian! I got majority of the materials for these projects from Crosscut Hardwoods in Seattle. Their address: 4100 1st Ave S, Seattle, WA 98134
Nice! :)
Thanks!
But I don't have all these tools
Slowly accumulate :P Black Friday is coming up lol!
Awesome
这机器得多钱啊？
哪个机器？
@@DingsWorkshop 就锯木头那机器
哦哦 我这款$2600
@@DingsWorkshop 😂😂成本有点高
Mantap.....
ممكن اشتغل عندكو انا بحب الشغل هادا
超赞👍
DIY you only need a lot of high cost tools….
You don’t need a lot of high cost tools to do DIY. The high cost tools simply allows an individual to do a task faster than using hand tools. Thus it shall be considered as spending money to buy time, which is a very good deal :)
Bagus ^^
Ae no japan vcs trabalhão com planeijados
木匠牛
很棒的分享,謝謝老螺