We Were Told To NEVER Do This | Burying A Shipping Container
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2022
- So much could go wrong. 😳
Get up to $900 off EcoFlow products during their Prime Day promotion.
Website: us.ecoflow.com/?aff=214
Amazon: amzn.to/3r9Rxh0
☀️ Solar Panels (PROMO CODE ambitionstrikes5) : www.santansolar.com/?ref=Ambi...
Multimatic® 220 AC/DC Welder: tinyurl.com/ycknhdrp
We're a husband and wife team who bought 20 acres of bare off-grid land in Northern Idaho. Follow along as we turn a pole barn into our dream shop with an upstairs apartment!
► SUBSCRIBE for videos on Sunday & Wednesday bit.ly/2VUaUOJ
► JOIN our mailing list mailchi.mp/ambitionstrikes/si...
Support Our Channel & Get Exclusive Content: / ambitionstrikes
Shop Our Favorites:
www.trailtestedmfg.com/shop
Renogy 10% Discount Code: ambitionstrikes
Our Favorite Ratchet Straps: amzn.to/3yAklSA
Video Music: www.epidemicsound.com/referra...
Drone: click.dji.com/ACjnj0gW_9VJVhd...
Handheld Camera: click.dji.com/ANJOV_T3imQ3QPY...
Instagram: restless_re...
Amazon Wish List: www.amazon.com/hz/wishlist/ls...
Mailing Address:
Riley Casey
105 Vermeer Dr
STE 2 PMB 141
Ponderay, ID 83852 - ยานยนต์และพาหนะ
Thanks for watching! What color do you think we should paint the container?
Match the rocks!
Camo
White if the panel is able to get light from the back side
Green ? Match the trees etc.. by the way , great job !
Same color as Barn dominium? Olive drab?
Might consider drilling and tapping some grease zerks into your hinges so they don't rust and freeze up over winter super cool setup 👍🙂
Stiffen the frame more also, think of wind load. Bridges move and sway, the gussets help keep it together from flex the constant flex from load. You are also putting static load on it, so yes it moved into place okay, but you will want to keep your eye on what and where fails will happen.
Beat me to it I was going to say the same it won't take much rust to lock that up a little grease and some paint will go a long way to making this last a good long time
I thot you were gonna suggest zerks for the stakes that kept hitting rock.
You might want to read up on welding galvanized. I think the fumes can be quite bad.
@@neon1929 the galvanized they have is done, and it's wire chase for panels, they'll just want to gusset and support once they fit the system. Put some good sized rocks on the downslope to back up your rods
If you are going to adjust your solar panels more than just "summer" and "winter", you could paint marks on your cable for every 10 degrees. That way if you want to adjust your angle you can just look up the ideal angle and move panels accordingly. It also allows 1 person to adjust array, you can just remove the bolts turn the winch to proper position and reinsert the bolts.
excellent post
The conex needs to be off the ground (railroad ties) and your perf pipe needed to be bedded in Gravel with landscape fabric covering it with more Gravel on top. A retaining wall for the hillside is a must as well. Shipping containers have all their strength at the corners. The skin isn't structural
We buried shipping containers in the desert in Aghanistan and Iraq all through the deployments, we also buried them to simulate underground bunkers. They just need to look up that info.
True or it gets clogged
I too was going to point out a few things myself:
1 They should have cut back into the
hillside and poured a concrete pad
and drilled into it to anchor the
container.
2 Any drainage pipe should be covered
with landscaping cloth to keep dirt out
then small gravel with a layer of sand
on top that.
3 Was the bottom of the container rust
proofed like the buried portion? If not
it should have been.
4 I think the wiring for the panels
probably should have been routed
through the channels to cut down on
extra work although I don't know what
they have in mind, they may be going
to run the wires through some kind of
conduit to protect the wiring from the
weather.
These ideas aren't meant as criticism but rather just my opinion on how I would have approached this.
Do it your way or as some of how others would. He said he would be happy to get 10 to 15 years out of the installation. Me I'd rather shoot for 25 to 50.
agreed
The main reason the holes go down is because water will gather at the bottom of the pipe first. If you installed with the holes up then the ditch would need to flood to the top of the pipe before the water would drain. Water chooses the path of least resistance so with the holes down the water will find them easier and can be managed away from the container faster. Something to consider, if it's not too late, is to coat the outside with some sort of undercoating, preferably the spray kind. You won't necessarily need truck bed spray liner but it would last far longer than regular undercoating. The longer you can keep the steel from rusting the longer you container will remain under ground...
With the weight hanging from one side of the container, my biggest concern would be a strong wind lifting up and sideways on the whole array and container and tipping it over toward the array. It seems that pre-measured posts to connect the bottom of the beams to cemented in ground mounts (one set of posts and ground mounts for each angle) would provide a support far enough outboard to absorb that rotational moment. I know the container is very heavy, and will be even heavier with the batteries in it, but that is one huge sail you are mounting on it. Alternately, you could run cables from the top corners of the container uphill to steel posts drilled and epoxied into the exposed tops of a couple boulders to keep the container from being able to tip, or do both to stabilize both the container and the sail.
Yah, I am DEFINITELY not a fan of the way they did that. The array should be, as you said, on its own posts piled into the grouind. This would also add support for keeping the container in place during heavy ran/landslide condition.
Ah well, it may just work. One thing that matters a lot is the local prevalent wind direction. I do agree though that this is a huge sail in storm conditions. A few storm tie-down points on the corners may be a good idea. And then, the container by itself - compared to this sail - is not heavy at all. I would consider putting a layer of concrete sidewalk tiles on the floor, not sure if these are a thing in the US. Hereabouts, these are dirt cheap and reassuringly heavy.
I totally agree the container in a any wind could roll over on its side of the array and you suggestion is a good one
It would be the same idea as how the secure by layer retaining walls back into the hillside
Possibly to of welded steels plates ( 3 - 4 ) along the back wall then welded steel beams off of them at 90 degrees and a thick steel plate on those beams then back filled covering that so it had the soil / rocks weight to of held the container in place and acted as an ground anchor and counter weight of that steel frame and solar panels
I agree .. wind load .. even as light as 20mph will place a hige amount of stress on the system. more well anchored braces needed asap!!
That comment about welding galvanized is 100% correct. Fumes are extremely toxic!
We have completely buried them at our Camp Sites but we first covered the whole container with Tar to seal up any unseen cracks they may let moisture in. One has been in the ground since 1971 and still works fine.
Great job guys!
I would be very careful moving that high pressure gas bottle around without the cap installed. Especially laying on its side. If it had rolled out of the cart and broken the valve off, you would be surprised at how far the missile could travel.
Gosh yes! It’s scary when one of those goes off!
Shush..Darwin needs work too
yes they can punch a hole in a block wall that is fully core filled with concrete
Imagine the # of views they would get , though 🤑😂😂
@@chrisforgan731 Saw it happen during shop class back in high school. oxygen cylinder was knocked over breaking off the valve, the cyl went through a block wall, traveled over 100 yards and buried itself in our garden plot. Unbelievable how much dust and dirt was in the shop, the rocket blasting off exposed all of it!
Throughout all the episodes I was always impressed by the deep consideration and planning. I understand the time crunch but when you started this project I felt you started cutting too many corners. My biggest concern is that there is no foundation for the container. Yes, batteries and everything in the container will add weight but it would have been prudent to place the container on solid corner foundations and weld the container to the foundation. You can still drill some holes and pour concrete in the front to bury steel beams vertically that will support the container. Otherwise when you will have high winds and solar panel sails you will have the container moving. I like the hinged idea but please consider reinforcement of the wall, maybe from the inside where the hinges line up. One more corner cutting I saw when you welded the HF winch to the wall. These container walls are not that sturdy having all the forces on this one point of contact. You pinned the extending struts on the top but still this wrench will need also reinforcement from inside. Also the extending struts will need reinforcement on the wall.
Containers leak from the bottom up when you bury them. Luckily you "did not bury" them but it would have been better to have drain channels underneath towards the downhill side.
Sorry for this, I usually refrain from commenting as its always easy from the comfort of the home office to see details. But I felt compelled to do this as you always impressed me with your attention to the level of detail. I just build a 45 ft car port of a container and can attest that these are not that sturdy to bending forces. Keep up the good work! I love your channel and your 'off grid way of life'. Cant wait for the dozer work.
Yeah no one cares let them build their coffin
Well.. as there's freeze where they are, the frozing of soil will make the whole soil/hill expand behind the container.. he will end up pushed downhill one day or an other.. those little rods won't hold it there.. oh and if they would, the wall would cave in slowly.. benting in.. until weld fails.. it is what it is.. the fact there's no foundation will only help it glide toward the downhill portion.. might save the container from being damaged.. we'll see with the years passing by
I see that everyone who applauds their foolish plan gets a like from the people who are doing this, while this really smart (and somewhat obvious) criticism is studiously ignored. Smart people welcome insightful criticism. It's helpful. Everyone makes mistakes and nobody knows all the answers. But these people are just dimwits. "What colour should we paint the container?" The colour is the LEAST of your worries.
@@joseywilds3133 - said "...Yeah no one cares let them build their coffin....."
Fcuk me mate, that was a bit harsh!!!!!
No less a funny comment though ;)
:)
Camo out the container and panel supports in a pattern that will match the surrounding forrest. Great job on the build. Drill the pivots the install grease fittings for long term ease of movement. 1/4-28 tap for threads. Use your jack hammer to install the pins in the ground.
Usually it’s considered dangerous to bury shipping containers because they aren’t built to handle side loads and are really only designed to handle loads along the rim of their ceilings and on their floors. It’s very possible that after some time the walls cave in because of the weight of the dirt pushing into the side. Especially with extra weight like water/snow/frost.
They should be OK unless there is a LOT of traffic uphill from the container shifting the dirt and rocks downhill. One way to build a stable retaining wall is with a metal mesh cage filled with large stones called a gabion wall. The way the rocks were laid along the side might act as an unboxed gabion wall. If there are no shape rock points shifting into the container I think it will be fine.
@@walterrutherford8321 It won't be fine or safe, these containers aren't designed to take side or top loads. There is an online video showing examples of containers buried without proper re-enforcement, it's clear what happens with only a few inches of dirt on top, never mind when it gets wet.
@MrCleitus en.m.wikipedia.org/wiki/Gabion
Jagged rocks don't settle and shift like loose soil. Without serious side forces, the rocks won't move. Any side forces now will be from landslides which, on that hillside, will be a possible hazard, whether the container is buried or not. But, the true test will be to check with them in 3-5yrs.
@@walterrutherford8321 As an engineer, it is a really really stupid idea, but you can't fix stupid.
You are right & also I want to know that why all container homes made by people are not touched with ground (I mean 100% touched {not only corners})
I think it will decrease the strength of a container when it is not touched with ground.
I think you should have poured concrete footing under the container so when the ground gets wet there will be no container shift.
I agree and a hydroduct drainage system on the buried side
Agree we live where there is a lot of clay and everything moves when it’s rainy season we put everything on pads raised above the ground with French drains around every side 30 years later no mold or moisture in any building
Agreed, containers wooden floor will not last.
Running the drain below the bottom of the container should help.
Also, leaving some of the down side material or filling the down side, before filling the hill side would help with movement.
Yeah that container is definitely going to shift,a concrete pad should have been done for the container to sit on,then you can fasten the container to the slab. Plus that pvc pipe drain will not last under all that weight,pvc pipe is not designed for those types of forces,you should have used polyethylene pipe that has drainage slits cut into it and is designed for load stresses. Hope it works out for you guys ,but i can foresee problems with that sea container.
I hope you guys are aware that welding galvanized steel releases some REALLY dangerous fumes. A little late for the episode but something to remember next time
Yes, a friend and an acquaintance, both died of bone cancer, both did a lot of cutting and welding on galvanized steel.
A really ugly way to die.
IMO not so big risk in outdoor job, as doing it in workshop. But yeah, health hazard nonetheless.
It's outside but respirator might help
Considering they are professional fabricators, I think they know this....
ya, that kind of pre-galv is not as nasty as welding on hot dipped
I think your main issues with the solar panel will come two areas: 1. Freezing and shifting/snapping welded joints and 2) Wind pressure and vibration.
It amazes me what vast knowledge different people have and the work they have done in their lives!! I know how to teach others how to sing/perform/how to speak in front of a crowd… but what you all do and what your viewers know👏🏻👏🏻👏🏻😃
The man hammers like lightning, never strikes twice in the same place..... lol I resemble this remark!
😂
If you want your french drain not to plug up, you gotta put some landscape fabric around it to keep mud from infiltrating. Or you can clean out the pipe periodically, which should be easy in your circumstance with the exposed straight ends. Also, rust is more complicated than you might expect. Things rust when exposed to both water and air, and how fast they rust isn't something you can easily guess just by looking. Not all water is the same, and some kinds of it lead to more rust than others.
Loved the shot of Boone and Bailey sleeping in the back of the car. 🥰
My understanding of weathering steel (COR-TEN) is that it requires the alternating wet/dry cycle to form the resistant barrier. Burying it eliminates the cycle and it ends up rusting "normally." I'd have used a thicker mastic-type coating rather than the paint and done something to protect the coating before backfilling to reduce scratches from penetrating the coating. Another thought would have been to put stone and drainage under the container to help with things drying out.
You have a good woman that can help you and knows what's she's doing that's good that it doesn't all fall on you good job guys
great video thank you! the holes face down on drain pipe for at least two reasons. one is the dirt is less likely to get inside the pipe with the holes down. facing the holes down also allows the water to enter the pipe at a lower level than it would if the holes were facing up. the drain pipe is not supposed to catch water as it comes down it's supposed to allow water to flow out as the water table rises up from Below.
I would paint the container to match your building. Have you considered an anchor system? I would put some big rocks in the front after you paint the container.
Watching you guys is great! Riley your mind is the part I enjoy and Together you two compliment each other so much. Love your can do positive energy. All I wish is there were more videos 😂I know it’s too time consuming. Enjoy!
Great job welding Riley
So much could go wrong .... but so much might go right!
The main concern I have would be the side load during the winter and especially during spring thaw. The added weight of the snow/water could trigger a side collapse or could result in the entire container and array sliding down off of the cut you made. I'd recommend that you look at not only shielding the top of the container, but also look into some way to divert run off to mitigate the potential problem.
Power supply taking shape nicely!
Might want to stack large rock beside the container's downhill side do that the fill on the uphill side doesn't push it sideways. Get more telescoping square tubing on the 4 corners of the array panel so it's much more rigid in the storms. You'll want that for the winter snow loading also.
I know that you've got more welding and other work to do for this project, but great so far!
Please wear safety glasses when driving those steel pins in the rock one chip off of that in the eye and it'll ruin your whole summer . Also, if you had a hammer drill to drill a hole before you put the pins in the rock doesn't stand a chance. Stay well, stay safe
I love that you guys are prepared to discover a mistake years from now. I have a bunch of firsts on my off grid property that you just can’t find in TH-cam University. Like you I figure you give your best thought and effort and hope it works. I have designed tilting panels raised off the roof of our barn to cater from snow depth. We had the barn structure engineered to withstand massive forces from snow, panel framing weight, lateral and updraft wind lift from the panels. This allowed us to have the panels out of main view like you guys have. Most say it wont work but the engineers signed it off so we are giving it a go! My water collection design was a first for the company that installed it so we’ll be watching that and expect some modifications also. Many have said I should be YouTubing my project but I know the effort that takes and what I’m most impressed about you guys is the effort you put in to document every project. I just could not find the time of effort to so that! Very impressive!
Thank you again. You should make it so you can add some tie out cables to help stabilize it when it gets windy. Have another great day.
It was all great. Love it!
The only thing is saw that was concerning was the thickness of your drainage pipe. Too thin of a schedule pipe for the load without a bedding for protection. Im confident it crushed with the first rock.
The good news is with the grades in the area, standing water wont be a concern.
Ive worked dirt for 50+ yrs.
You drive around with the gas bottle without the protective cap. If that bottle falls out of your trailer and the faucet breaks, it will fly off like a rocket. never transport a gas bottle without a protective cap! (Love you guys!)
That is an excellent reminder and major oversight on our part!
@@AmbitionStrikes Long ago before I retired from trades, I remember hearing stories about those bottles. When some of our guys were tearing down an old manufacturing plant next to Lake Huron in Michigan they found some full bottles and knocked the faucets off to see what would happen. They flew at least as far as a football field into the lake. I'm pretty sure they could do way more damage than being shot with a shotgun.
Absolutely amazing woman.
I can only wish my wife was as supportive and helpful.
Off grid is awesome. Love you guys.
You could install an actuator and light level tracking so it stays at the optimal angle throughout the day / season. Simple and pretty cheap to do.
Now you need a gigantic broom / windshield wiper mechanism to sweep the snow off of it in the winter time . Super cool and resourceful set up you guys are building keep up the good work 😎
How about a sailboat style traveler? A Broom Arm from top to bottom that travels on horizontal upper and lower tracks. One pass -Then parks itself on the opposite side.
Next pass is opposite direction.
They need somewhere for the snow to pile up over winter so the
Bottom panel is not covered.
They could put it on timer or remote for when they travel?
View camera connected to internet?
I'm just jealous of your welding skills, Courtney!
Most people would be satisfied with stationary solar panels. But this duo has to build one that tracks the sun. I'm impressed guys
Hope you are figuring in the wind for this project! Maybe some additional stabilizers using galvanized wires
Brilliant flexible/pivoting solar array framing system, though I'd be concerned about your solar array (once the panels are installed) turning into a sail in strong winds. Also, your container is probably at some point going to take some side damage from a lateral load, most likely from water, I would imagine (think rapid snow melt or really heavy rains). Your drain may not be able to keep up. The reason you shouldn't bury shipping containers is they're not designed to take lateral loads, they're designed to take vertical loads, but I'm sure you know this already. If burying one, you should really reinforce the interior walls with some framing
Thanks again for sharing your lives with us and letting us in on your adventures. No, not sketchy at all...😁
A few years ago I worked for a business that sold food storage and preparedness products, (2000). We sold product to a girls ranch, they had several containers buried. But, they had them with the back into the hill, also the terrain was very rocky and clay so it couldn’t move because of saturation. So good luck!
Spray paint marks on your cables and supports for summer (yellow) and winter(blue) to reduce the guesswork. You could take it a step further and adjust it 30/31 days. You would need six colors or marks to mark the progressions between summer and winter solstices. If it gets too top-heavy, use the hole saw and cut 3" disks out of the top, spacing the holes out like an aircraft spar. Then add the disks to the bottom. Each 3" disk should be 3/4 to 1 lb.
The best ideas are the simple ones ,well done .
Diagonal measurements are the key to squaring things up perfectly.
Really, really, really big project..... smiles 😊☺️☺️☺️
You could weld up up tie backs for the container. Big, long T shapes, that you dig into the ground and bury on the uphill side, will help steady the container onto the hill side.
When you study "frost heave" you'll see it pushes equally, in all directions toward the surface... L shaped earth pushes in an L shape (where your container sits is L shaped earth). Long Tie backs will help steady it.
exactly. works very well. ive done it with retaining walls.
I was thinking that a post on the front on each end, using the same post method you used constructing the house, would keep the container from creeping better than the skinny stakes in the soil.
Let me try again.
Your pivoting solar idea is brilliant!
Ice, snow and expanding the fill.
I live in the sub-tropics. I see how mild weather pushes rock apart into sheets and chunks in my locale.
The V shape of the backfill is like a wedge. A simple machine.
How hard is the winter freeze-thaw going to push the container away from the hill?
Very cool adventure to be on and pretty excited for the unlimited power! I'm sure most of the colors have been suggested, so how about a pastel purple or light purple. Something that subtlety goes with nature a bit, but not completely.
To drill holes in ground and fill with concrete with chain to anchor everything down might be a good idea.
I have been so inspired by you guys, can do attitude, and problem solving.
"Little by little, piece by piece"......until I am complete! Love it!!! And with your continuing projects, you are celebrating Christmas year round!!! And I'm sold on ecoflow products now.
awesome! I think I would drill some pins into the ground at the bottom in case there is erosion or an evil spirit.
You have plenty of input and suggestions regarding your work, I don't think you need any more. Without a doubt, one of my favorite episodes. Riley's brilliant engineering mind and Courtney's continued support, welding skills, excavator skills, editing skills and... You guys are fire!
Your enthusiasm for projects is a big part of your success. Great progress.
I think it should be a camp of all the surrouding colors.
I think the biggest problem that you would have when you bury a container is if you put too much load on the top of your container. We had a 40 footer at work for a field office and one of the job site material handlers used a fork lift to set a pallet loaded with a full reel of heavy electrical cable on the roof. It was easily over 1000 lbs and the roof caved in about 12 inches. When the pallet was lifted back off, the roof partially rebounded, but was still deformed.
All the strength in shipping containers is in the corners because the purpose is to connect them together on ships and then to chassies to deliver to locations on land. The sides as well as top and bottom are corrogated, but mostly to keep cargo inside, not to withstand pressure from earth when buried. That's why everyone tells you not to bury shipping containers.
when drilling with a hole saw in metal, cut a piece of sponge and insert inside the saw. put oil in the sponge to lubricate and help cool the saw. Great vids!!
Nice tip. Have filed that one away :-)
The dogs sure had a good nap going in the back of Courtney's car!! Too funny.
As always, you guys are really amazing with your well thought out projects ... 🇺🇸
Boone said I'm getting out of the sun. Bailey said me too!
Great progress! I was a little concerned to see the last few seconds of the video where you are hauling the gas cylinder in the trailer with out the cylinder cap on. If it slipped out the trailer, the valve could get knocked off followed by a dangerous accident.
How will the solar array work with 5’ of snow on the ground? Love your videos!!
Jim
Hello 👋how are you doing?
I seen a older couple on TH-cam build their shipping container home underground and it was pretty impressive😍😊
Love the music at the beginning of the video when you guys are back filling the container, lol . you guys are great.🫶🏻
For French drains the holes in the perf pipe go up. For septics the holes go down. You should also use geotec fiber on top
You could possibly put a light sensor and small motor on your solar panels array and have it follow the sun automatically that way they will always get the optimal Sun🤔, and you guys are doing great that's a lot of work and it's really going to be a good project and be beneficial for your place
Besides following the sun you could add a “storm mode” to the setting so it enters to a level that it will get sun but less wind. Also you could place on the roof 2 h-beams with a structure on the end at the mountain side where you place big rocks on it as counter weigh for the solar arrays. Well done on the mobile welder
Big sail, and North Idaho occasionally gets BIG WIND…..
So, MANY bracings, and get those heavy batteries inside for ballast!
I'm glad we watched this late so I could come in here just to tell you that you're both awesome!!
😊
Love Your videos!!! Concerned about those freak wind storms that once in a while blow through.
I was thinking the same thing.
Nice setup. Would have put a dirt cover over the drain pipe. One thing that I would suggest is to taper the dirt at the bottom of the pannal edge to let the snow slide off and down the hill side. Can't wait to see how it works out.
Yes, snow accumulation off the bottom of that huge array is going to be huge in the winter, you are going to need someplace for it to go or you are going to be going up with your excavator and digging next to your delicate solar panels...
A deck on the container should be a future project. It’s is an excellent view
Owsome. Super idea for swinging the panels.
Cheers. 🍺&🍷
Wind load could be a problem. I was not happy with their "foundation" either. I would have suggested 4 corner posts sunk and cemented in: gravel bed with 3 drains to sit on: separate I beam and posts for panel support: and some wind load calculations. In my area, Pacific Coastal Range, just north of San Francisco we get 60+ winds several times a year.
What's the point of comments like this? Do you really expect them to dig it all up and make changes? The container didn't move---they said they don't want/expect it last 50 years. They did a great job to accomplish their goals.
@@KenWoodsNL the point is that this set up is potentially dangerous, and enough people without experience will try to replicate it. There are reasons burying containers is *generally discouraged* - specifically due to oversights pointed out here multiple times. There will be cases where there is sufficient sheltering from the wind where uplift isn't an issue, but in other, it would be catastrophic and hugely expensive. Pioneering spirit is fine, ignoring common sense and your mileage may vary.
This is a great idea, but I really would anchor the container more. Drill down through each corner into the bedrock and anchor with concrete and anchor bolts. Otherwise fantastic!
Another awesome and very creative project. You might want to have someone check the local wind loads in summer and winter modes for a) lifting up the container, b) shearing your adjusting bolts, c) buckling your sliding posts. Good luck!
I liked how you test at the snow load Super cool idea
There is a large amount of force on the container to roll or push it down the hill. I’m also concerned now you’re adding a very large solar panel system which will act like a lever or wind sail to roll the container. Gravity and wind are powerful forces. You may want to consult an engineer and add out riggers or ties back into the hill side. I’m concerned as you will have a lot of money in that container.
I think the problems with burying shipping containers are more when they completely under ground, not just used as a retaining wall like yours. Ive seen a few of them crushed like a tin can when put underground without adequate bracing.
IF THIS IS IN SNOW COUNTRY, THERE IS A FROST LINE.
IN WINTER THE EXPANSION OF THE DIRT & ROCK WALL COULD DAMAGE THE STEEL SIDE OR MOVE THE WHOLE CONTAINER SOME.
IN HEAVY RAIN THE MOUNTAIN COULD SLIDE DOWN AND DAMAGE THE CONTAINER WALL OR MOVE IT.
ONE SOLUTION WOULD BE TO GO UP THE HILL AND DIVERT ALL WATER FROM RUNNING TOWARDS THE BOX.
BEST SOLUTION IS TO ALWAYS KEEP PRESSURE AND EXTRA WATER AWAY FROM CONTAINER !!!
Thanks :) I knew a guy hid a container in a cave, he did it at night and covered the front with rocks. Made a nice home and I don't think he ever got discovered
Thanks for sharing another interesting project. Great creative design and excellent fabrication skills. Regarding burring shipping containers. I remember seeing a video on a community that created tornado shelters doing this. They lined up the containers with the doors facing each other, just far enough apart to allow the doors to open. Then they covered the sides and back with dirt and grass to help hold the dirt in place. Voila quick and solid protection. I believe that was Greenburg Kansas' FEMA trailer park after the devastating F5 tornado that scoured much off the own out of existence. I know you guys are pretty good with safety, but I see Riley loves his hiking style boots. He should seriously consider getting some safety shoes. They are now offered in similar style boots so they are much more comfortable than boots of the past. Just dropping a descent sized wrench can crush a toe. It's worth the $100 to $150. They are also generally electrically insulated and fire resistant. The first feature probably saved my life when I turned the breaker off in the house after I moved in and needed to fix a socket. When re-stripping a wire I got a serious tingle. Turned out some idiot had connected this circuit in a loop to 2 circuit breakers. I had manually traced the wire from the breaker so I was certain the correct breaker was off. After that I also got in inductive power indicator. Hold it near the holes in the outlet of electrical wire and it will beep if it's hot. Cheap and even easier than using a multi meter. Thanks again for the great videos and I look forward to seeing your solar system progress
Hi Andre, thanks for the great comment! We agree on the importance of safety toe boots, the ones you see Riley wearing are steel toe. Those inductive wire testers are super cool! We have one as well. Anyways thanks so much for watching and taking the time to comment!
The more we watched, the more we got scared for you. One again, you didn't remove any millscale from your gussets or other metal. (Look up millscale to see why it is very important and what it is.) Basically your welds are can be bad and weak, you cannot get good peniteation with unckean surfaces and millscale plus contamination. Clean surfaces are needed for strong elds and good metal fusion. Which makes a good, safe, and strong weld possible. Maybe watch some 'How to Weld and Clean Metal Videos' by real welders? It may look okay, but your smartest move is grinding off all your dirty or contaminated welds, then recleaning the metal and rewelding it the correct way. You save no time skipping metal prep, if your welds are not strong, clean, and actually have fusion. It also looks like you spot-welded over and over trying to make it look like a TIG weld? If? That is the case, that is also not a strong penitrating weld, because thicker metals will not get hot enough. On thin sheet metal it is used to prevent too much heat from warping the light guage metal panels. But on thick metal it is pointless. You want the heat to fully melt both sudes of the weld metal to create good fusion and a quality weld that will hold. A way to test your existing welds, is try to pull some apart, or cut a small section to see if penetration was achieved. Safety Tip: moving a compressed gas cylinder without the protective cap in a sketchy plastic trailer on uneven grade down hill, YIKES! Lucky that didn't fall, break the valves off, and then shoot like a torpedo right through your wife or you. Yes they really can do that. I wish I had a possitive comment, but you are dangerous and ill trained to be doing things like welding heavy metal objects anywhere. Please take the time to educate yourself on proper welding and metal preparation, the use, storage and transportation safely of explosive gasses. I will hope everyone's advise and suggestions are taken into account for your sakes. Good luck.
My neighbor buried one and concreted it over. They use it for storage. Be careful with the mold that might build up. After a few years they had a serious mold problem. Other than that it's still in use today.
Miller is a great little machine. Good choice. I’m impressed with y’all’s ambitions and team work. A man and a woman can do anything as a team. My wife has proven this to me many times. She is awesome. Good luck to you both.
I have that same welder, (multimatic 220 multi-process) it’s amazing being versatile. Welding tip get Lincoln “inner-shield” flux core wire then no need to tow gas bottle around, only down fall is spool size is either 5lb or 60lb spools unless you can find the 20-30 lb spools to fit in your machine. My wife and I love the show, keep up the great content!
Hole saw tip as soon as your saw touchs your work, you have the circle scribed. Take and drill and drill two holes the width of the kerf about 180 degrees apart threw the steel. This relieves the chips alot faster with less effort.
To square large/long things use the 345 Triangle. From the same point measure 3' one direction then 4' 90⁰ from it. That's 2 legs of a triangle. The long leg between it would be 5', hence the 345 Triangle which ends up with legs 90⁰ to each other. So it works in multiples if you have for example a large deck or frame 6,8,10 for example
Congrats Guy's on building ur solar panels support. paint it green.
The two I seen buried were fails, the one I seen that was a success was reinforced with with t-rail ribs inside and wire concrete mesh on the outside. It was set back in a partially dug out hillside then two inches of concrete was poured around it and over it. Then filled in around all that and landscaped with trees. The doors was the only thing left showing and they were painted to blend into the mountain side. The two fails were literally buried under ground with top hatches for access. Both concave in with in year from the pressure, sections of the sides split leaving gapping holes that allowed dirt and water to spill in, subsequently ruining all the supplies inside. I climbed partially down one access ladder with a flash light and the owner and quickly retreated as it was half flooded with water and had become a refuge for rattlesnakes floating on supply boxes and debris.
You kids keep doing what your doing. And try and have fun.😉
I've been off grid for 3 years, what I've found is even with the panels optimised for winter Sun (UK 🇬🇧) we have excess power in the summer, it's feast or famine.
Something you could do to make a huge difference in the temperature inside of the container is to put about a 4-inch layer of dirt on top to help insulate using 2x6s to make a border on top.
I saw a video of a couple in New Mexico that buried 2 containers side by side to be their home. I couldn't tell you the name of it. It's been about 6 or 7 years ago that I watched it. It's looking good there.
Ralston Oklahoma has a single school building that held elementary thru highschool. The school at the time only had middle school attending it but the state is know for tornados and the kids didn't have a good Storm shelter. So we buried a conex container under ground. After closing off any openings that could allow water in. Then we installed under ground electric, attached some vent pipes with fans along with heat and Air . Along with a short wave am/fm radio . It's been 70% buried for over 10 years and no issues with rust or water entry.
That is awesome!
This is the best solar setup I have ever seen. Great Job.
Love the Ecoflow battery thingy and wow enough juice to run the AC for 8 hours, yes please I'll have on of them.
Loving your clips too.
What a great idea, love how you two come up solutions to problems. Love the channel
I know a guy who has 37 buried , we painted them with a latex paint , pooured 4" of concrete on sides and inches under , , we placed railroad tracks every 2' on top and poured 2" of concrete then covered with 2" of sand
That’s a lot of buried containers!
@@AmbitionStrikes yes it is , we have it set it with living quaters , butecher shop and and meat locker , generator , solar storage for now , storage for canned goods , storage for all other food , storage for atvs , storage for arms and reloding , its meant to hold 3 families
its new experience u guys trying something I'm learning too by watching, I only wish u had done that grey rust paint thingy before the backfill
Okay this is very cool. I love it. I have a feeling the valley in the fence post is going to be a chase for wires.