Unboxing a Gantry Pro SCY16103. It’s BOTH Fast and CHEAP!

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 44

  • @PERTHWESTOZRC
    @PERTHWESTOZRC ปีที่แล้ว +4

    These little trucks/jeep is awesome, especially when you install some oil filled shocks. I installed wltoys 124016 shocks on mine and it was a absolute ripper on the sand dunes in paddle tyres. Has more than enough power for a small 16th scale

    • @angesrc
      @angesrc  ปีที่แล้ว

      Yeah I’m def going to upgrade the shocks. I was going to ask you. Did you see in the vid I was talking about the front diff. Mine really stiff. Is yours the same. Mine is really notchy🤔🤔

    • @BASSstarlet
      @BASSstarlet ปีที่แล้ว

      @@angesrc It does not heat up due to this tightness?

  • @RCRoads
    @RCRoads 2 หลายเดือนก่อน +1

    It's plenty fast and has some nice headlights. The body design looks good and overall it looks like plenty of fun. Great job. 👍

    • @angesrc
      @angesrc  2 หลายเดือนก่อน

      @@RCRoads yeah it’s a great little Rc basher. Handles Really well and already has a brushless setup in it.
      Check out my other video when I took it to the beach.
      RC Car: JJRC Gantry Pro Brushless on Paddle Tyres at the beach with @rccrazy
      th-cam.com/video/F3bcmxrGJgU/w-d-xo.html

    • @sabahdari
      @sabahdari 7 วันที่ผ่านมา +1

      What’s the maximum batt capacity that would be safe?
      I was looking at a 4500mah 18650 batt. Will it be ok?

    • @angesrc
      @angesrc  7 วันที่ผ่านมา

      @ I wouldn’t run anything bigger than 2s. If it’s all stock. If you want to ru 3S, then I do recommend 1500 mah, that should fit snug into the battery tray

  • @thedemocrat73
    @thedemocrat73 ปีที่แล้ว +2

    _This monster moves_ ~ *California*

  • @philiprccars4340
    @philiprccars4340 ปีที่แล้ว +2

    It is very interesting how many names these RC's go under - WLToys, Joys Tech and SuChiYu and also JJRC! Yup, I recognise the Controller too! The Controller actually feels very nice to me, totally on par with the HBX 16889A controller. The front diff is either incorrectly assembled or the grease has hardened. The diffs on my Cheetah move freely after I serviced them, I can spin the one wheel with just my finger both it the front and back.

    • @angesrc
      @angesrc  ปีที่แล้ว

      Yeah it’s weird hey. It’s like a pair of jeans. Just with a different label. 🤣

  • @pandroidigital
    @pandroidigital ปีที่แล้ว +2

    Not sure if anyone has noticed, but there is a plastic film on the body for protection when shipping. It peels off.

    • @anisghil
      @anisghil ปีที่แล้ว +2

      Hello, yes you have to remove it before aplying the stickers

  • @haydenkelliher2859
    @haydenkelliher2859 ปีที่แล้ว +1

    This the same base as the 16101 pro and 16102 pro?

  • @tudortoma1935
    @tudortoma1935 5 หลายเดือนก่อน

    Any idea how I can bind the remote with a new ecs?

  • @philiprccars4340
    @philiprccars4340 ปีที่แล้ว +1

    I am still trying to determine what makes these RC's so much neavier than the HBX 16889A and 16889A PRO because the non brushless cars of these also have nylon diffs and gears, and the metal brace cannot account alone for so much more weight than the HBX.

    • @angesrc
      @angesrc  ปีที่แล้ว

      What’s the difference in the weight?

  • @pandroidigital
    @pandroidigital ปีที่แล้ว +1

    What servo, battery and shocks did you end up going with?

    • @angesrc
      @angesrc  ปีที่แล้ว +1

      Everything is stock straight out of the box. It does come with a nickel metal hydride battery, but I like to use Lipo instead . they have more power and more officiant. The servo and the shocks are all stock standard. But to answer your question, I did end up buying some WL toys oilfield shocks and they work a treat. I think I used wltoys124019 shockers Thanks for watching.👍🏼🚗

    • @pandroidigital
      @pandroidigital ปีที่แล้ว +1

      Thank you!

  • @anisghil
    @anisghil ปีที่แล้ว +1

    Hello, mine is going full throttle without pressing the remote, it happens also sometimes when i press the middle inverter button. Do you thini its the esc or the remote ? Thank you

    • @angesrc
      @angesrc  ปีที่แล้ว +1

      Possibly could be an ESC issue, obviously just check make sure you have healthy batteries in the remote control and as always turn on the remote control first then your car but also make sure that you’re throttle adjustments are set to 0 and that it’s not cranked all the way to full throttle

    • @anisghil
      @anisghil ปีที่แล้ว

      @@angesrc thank you, i have allways full batteries in both car and remote. How ca i set the throttle to 0 with this car please ?

    • @angesrc
      @angesrc  ปีที่แล้ว +2

      @@anisghil on your remote control there should be a little knob labelled TH which is your throttle control. What you want to do is Centre it in the middle, then slowly dial it clockwise until the car starts moving and then just back it off and then that should be set.

    • @anisghil
      @anisghil ปีที่แล้ว

      @@angesrc i will try that, thank you dude !

    • @angesrc
      @angesrc  ปีที่แล้ว +1

      @anisghil no problem at all. Glad I can help out.👍🏼🚗

  • @carterminich5610
    @carterminich5610 7 หลายเดือนก่อน +1

    Leave the toe out alone...its for straight line stability!!!!!!!!!!

  • @Paul-yz8jy
    @Paul-yz8jy ปีที่แล้ว

    Got one of these for Xmas for my son. The middle long bar part seems to be moving out of place and the RC won’t move unless i push it up into place, but it eventually comes loose again. Is this fixable? Hope you have can help. Thanks

    • @Paul-yz8jy
      @Paul-yz8jy ปีที่แล้ว

      It’s the mid-drive hexagonal shaft that isn’t in place correctly?? Anyway of fixing this?

    • @angesrc
      @angesrc  ปีที่แล้ว

      I haven’t come across this issue. But just make sure your top plate and diff housings are nice and firm as these gold the center shaft in place. I haven’t had one come
      Loose. Just go over all your screws

  • @Mick_Au
    @Mick_Au ปีที่แล้ว

    Nice unboxing mate looking forward to the shock upgrade and a speed test. Why they added half decent stuff to it and then put them shocks on it is beyond me 🤦🏻‍♂️
    At least you have a nice quiet to give it a test in 👍🏻

    • @angesrc
      @angesrc  ปีที่แล้ว

      Yeah, you think with a brushless set up they would at least give you oil filled shocks like I know we’re gonna spend more but sometimes you want something that’s just ready to run. Not saying it is it, but it would just be nice to. Yeah the street is nice and quiet too. Sometimes I go to the corner and I can really give it a good thrashing

    • @Mick_Au
      @Mick_Au ปีที่แล้ว

      @@angesrc Have a good weekend mate 👍🙂

    • @angesrc
      @angesrc  ปีที่แล้ว +1

      @@Mick_Au you too mate. 👍🏼🚗

    • @Mick_Au
      @Mick_Au ปีที่แล้ว +1

      @@angesrc Thanks 👍🏻

    • @andrew4403
      @andrew4403 ปีที่แล้ว

      Shockers not shocks. Lol😂😂😂

  • @haydenkelliher2859
    @haydenkelliher2859 ปีที่แล้ว

    Btw your link is for the brushed version

  • @Jat1can
    @Jat1can ปีที่แล้ว +1

    This is awesome

  • @eliseunascimento8035
    @eliseunascimento8035 ปีที่แล้ว +1

    Tenho 2 desses ...😊

  • @jah-jah87
    @jah-jah87 ปีที่แล้ว +3

    Your diff is too tight.... loosen the screws and you should be fine

    • @angesrc
      @angesrc  ปีที่แล้ว +2

      Yeah I’ve ended up doing that. Just a half turn on all tbe screws and is sweet now. 👍🏼🚗