If anyone else is getting the infamous double click issue, disassemble the mouse as shown here, then pour some isopropyl alcohol down the switches and click it a few times before the alcohol evaporates. Re-assemble and enjoy a (semi-permanently) fixed mouse.
This video is infinitely more helpful than Razer Support ever was. I had a case of "the rattles" and a couple loose screws fell out once I cracked it open. Sweet sweet silence has finally returned. Thank you!
I LOVE YOU, GIORGI, you really saved me cause i had no clue where the screws were in the mouse lmao got cat hair stuck inside the wheel, thus the mouse not scrolling properly, but now it's fixed thank you so much, dude
If you guys are having issues with the mouse wheel jittering while in use, hop into Synapse and change its tick rate to either 125 or 1000, I chose 1000 as it seems to work for me and my games.
wait what? You just left this comment which LITERALLY saved me a couple hundered dollars buying a brand new mouse and didn't get any likes? Man. Thank you.
My Mouse wheel was starting to have some problems. Sometimes when i'm in a game or in a browser, it would skip, stutter, roll back and come back to where i was.. it was weird, i dealt with it for a little while but i finally got annoyed today, and i finally opened up the mouse(Thank you for showing me) and clear out the mouse wheel. Seems to work fine now! like from me!
IF u have a lose screw inside, U dont have to remove the front slider and unscrew the 2 bolt in front. Just unscrew the one in the back, and u can make a big enough gap so the screw can inside fall out. Mouse works like new without that, and dont have the rattling noise. Its the easy method to solve the problem without damaging your front slider.
I had some rattling sound in mine, I sent it back with warrantee (we don't have Razer support here) and they said they can't repair it. I got a new one, and after a month the same sound came, and since I'm not being aggressive with the mouse I wanted to look for myself, and I wanted to look up a video, so I can be more safe and don't damage the mice. The upper pcb loose a screw, the thread for it was damaged. I used some glue to make a bed for it, and it is in it's place now. Thanks bro
@@Lvlaple4Ever Yea, I guess so... it's a shame. This is why I didn't want to repair the first one by myself.. but since the service was so horrible here I didn't want to waste my time with it. It's fully functioning ever since. If your service is better I suggest you use the warranty, but if you struggle like me, then it's a good and quick solution.
I had problems with my right-click not registering properly, especially when aiming in shooters. Tried this disassembly, cleaned it with a brush and isopropyl alcohol, and the mouse feels like it´s new!
Saved me from having to buy a new mouse. Side buttons were not working. I was able to take it apart and the screws holding the insides to the top of the mouse broke. Super glue to the rescue!
*IF YOU'RE ONLY DOING THIS TO GET RID OF THE RATTLING NOISE PLEASE READ THIS* I managed to get the little piece of plastic and screw to fall out but simply unscrewing the middle screw near the barcode (It's hidden under the sticker) then prying open the back of the mouse VERY SLIGHTLY and simply shaking it until the junk fell out. I hope this helps someone!
I you have a squeaking mouse wheel and want a ( temporary) fix without opening the mouse. buy some lubricating oil and with the long small tip of the bottle put one or two small drops left and right from the wheel. scroll the wheel for a minute so the oil can drop down onto the axle of the wheel. I know it's a temp solution but you don't have to open the mouse.
How do I get the plastic cover off, wihch is on the top body this thing where the booth mouse klicks are? Like I accidentally dropped some ornage juice about it and its sticky.. but just between the mouse buttons and the body below it
Is it possible to change the switches on this mouse? I want to change the right one for the left one because one has a double click and the other does not
Hey I was thinking about moving my deathadder like a final mouse phantom by drilling holes in it to reduce weight... How Brittle is the plastic... I want a light mouse that I can palm grip but the final mouse is too small
If you want to make it lighter, I wouldn't recommend cutting holes into the top, because there would be VERY little weight reduction, at most 5-6g. I would recommend cutting pieces of plastic off the bottom or inside the mouse, which would be more efficient and effective, but make sure you're not damaging any important parts.
PERFECT THX.. my issue, middle click didn´t work properly after a few months not using the mouse / FIXED: alcohol bath = anti viral can spray = did the job, let it dry = hot air, loob a little the moving axle... done
There are pointless long screws holding up the death adder led light module inside; they get loose and fallout. black plastic cracks that they screw into. Open up carefully, take them both out, there is one of three bigger that is strong enough to keep it in place. Put it back together and you”re good. Don’t worry the glue of the front back pad sticks well like new. Also you have to poke a hole to get to the back underside screw, it doesn’t interfere with sliding.
anyone know how to be rid of the dreaded razer squeak for the death adder elite mine started a couple of days ago.i was wondering if i can lube it up somehow or spray it with some compressed airif someone could help i was very much appreciate it
Is there a way to make this mouse lighter, cause i like the ergonomics, though 105 gramms is pretty heavy weight.. it's my first mouse and i don't want to swap yet since it's fairly new. So does this baby include weights? otherwise i'll drill hole if necessary like i've someone doing before
No weights. Some guys used to rip off a big part inside the old DA, below the top shell which can't be seen when the mouse is put all together again. I didn't open my Elite yet to see exactly if it still can be done tho
Mine squeaked... every turn of the wheel a small squeak noise. Warranty replaced it. Sadly now after warranty gone, this one doing same thing. Probably needs just a touch of silicon grease. Shame screw holes are under the pads. They never seem to re-glue properly.
I've learned how to live with the squeak but now the wheel button is acting up so I guess I'll need to open it but then the issue with pads comes in... Truly disturbing situation
a screwhole which holds connectors for side buttons and dpi buttons broke off and the screw it self felt off which resulted in terrible noise inside. Easy fix, but very weak from razer since mouse is only 1,5 years old.
Can dust make my mouse double clicking? I have mouse for 2 months and it started double clicking for some reason. never punched and my room is clear :D
got 3 dh elites all of them have issues but none have double clicking problem so I can't answer your question, version with dust is funny but impossible I have dusty Microsoft IO 1.1 and it still works perfectly
Spray Deoxit on the buttons, click em a few to get the liquid inside, slap her back together, buy $14 new skates on amazon, done. Wash your hands before gaming, mt dew and Doritos dust all over everything.
Crazedtech yes i thought of a genius idea. I just opened mine without removing the feet. What i dis was take a needle and pick two tiny holes to where the screws are. Then i took a screwdriver and opened the mouse without the feet peeling. You will have two permanent holes in the feet but its much better than removing them.
![[ASMR STYLE] RAZER DEATHADDER ELITE GAMING MOUSE TEARDOWN, INSIDE TUTORIAL AND RESTORATION](http://i.ytimg.com/vi/odnM3M3OFBA/mqdefault.jpg)
Pro tip, use a hairdryer to get the Teflon plates back on.
Thank you sir, melts the glue great and then goes back on flat
@@Hopgop1 Glad to have been a help!
Teflon as in mouse skates??
If anyone else is getting the infamous double click issue, disassemble the mouse as shown here, then pour some isopropyl alcohol down the switches and click it a few times before the alcohol evaporates. Re-assemble and enjoy a (semi-permanently) fixed mouse.
I will try this, will report back
wow that was incredibly easy and worked perfectly thanks
This video is infinitely more helpful than Razer Support ever was. I had a case of "the rattles" and a couple loose screws fell out once I cracked it open. Sweet sweet silence has finally returned. Thank you!
i have this case too
I had the same thing... I'm curious as to where those screws came from because I couldn't find the spot when I opened it up.
I think my mouse has a screw loose inside. I can hear it rattling around. Sigh
dame thing happend to me and now it's fixed. I didn't remember how satisfying the silence was.
I LOVE YOU, GIORGI, you really saved me cause i had no clue where the screws were in the mouse lmao
got cat hair stuck inside the wheel, thus the mouse not scrolling properly, but now it's fixed
thank you so much, dude
Ty dude, i was unsure about the screw positioning.
If you guys are having issues with the mouse wheel jittering while in use, hop into Synapse and change its tick rate to either 125 or 1000, I chose 1000 as it seems to work for me and my games.
wait what? You just left this comment which LITERALLY saved me a couple hundered dollars buying a brand new mouse and didn't get any likes? Man. Thank you.
wait i dont see "tick rate" anywhere in the synapse app, could you explain a little more please? thx
@@jesty_ it doesn't say tick rate anywyere in the synapse app? how did you do this?
@@flipnogit says Polling rate
thank you so much this saved me so much time i love you x
My Mouse wheel was starting to have some problems. Sometimes when i'm in a game or in a browser, it would skip, stutter, roll back and come back to where i was.. it was weird, i dealt with it for a little while but i finally got annoyed today, and i finally opened up the mouse(Thank you for showing me) and clear out the mouse wheel. Seems to work fine now!
like from me!
I have the same issue. Could you please more specific how to fix it ?
Same issue here :/ It looks a little loose, it's normal ?
IF u have a lose screw inside, U dont have to remove the front slider and unscrew the 2 bolt in front. Just unscrew the one in the back, and u can make a big enough gap so the screw can inside fall out. Mouse works like new without that, and dont have the rattling noise. Its the easy method to solve the problem without damaging your front slider.
Thank you so much for such a nice idea!
thank you bro you the mvp
I had some rattling sound in mine, I sent it back with warrantee (we don't have Razer support here) and they said they can't repair it. I got a new one, and after a month the same sound came, and since I'm not being aggressive with the mouse I wanted to look for myself, and I wanted to look up a video, so I can be more safe and don't damage the mice. The upper pcb loose a screw, the thread for it was damaged. I used some glue to make a bed for it, and it is in it's place now. Thanks bro
Does fixing it yourself by opening the hole to the screw void the warranty though?
@@Lvlaple4Ever Yea, I guess so... it's a shame. This is why I didn't want to repair the first one by myself.. but since the service was so horrible here I didn't want to waste my time with it. It's fully functioning ever since. If your service is better I suggest you use the warranty, but if you struggle like me, then it's a good and quick solution.
Thanks, man, I'm having a problem that dropped a screw inside it and almost everything fell, I'll try to fix it with this video, Thanks!
I had problems with my right-click not registering properly, especially when aiming in shooters. Tried this disassembly, cleaned it with a brush and isopropyl alcohol, and the mouse feels like it´s new!
Thanks, got to resolve my scrolling problem that occured due to cat hair inside the mouse :)
If just cleaning - get the three screws out and use "contact cleaner w/lubricant" on whatever doesn't blow out.
Saved me from having to buy a new mouse. Side buttons were not working. I was able to take it apart and the screws holding the insides to the top of the mouse broke. Super glue to the rescue!
dude thank you soo much..You just saved my mouse
thanks man, help i lot, my mouse now looks new
*IF YOU'RE ONLY DOING THIS TO GET RID OF THE RATTLING NOISE PLEASE READ THIS*
I managed to get the little piece of plastic and screw to fall out but simply unscrewing the middle screw near the barcode (It's hidden under the sticker) then prying open the back of the mouse VERY SLIGHTLY and simply shaking it until the junk fell out. I hope this helps someone!
Thank you, best advice
Thanks, saved me the trouble of taking my whole mouse apart
I'm so happy I could help! :D
Top tier mate, thank you so much!
I you have a squeaking mouse wheel and want a ( temporary) fix without opening the mouse. buy some lubricating oil and with the long small tip of the bottle put one or two small drops left and right from the wheel. scroll the wheel for a minute so the oil can drop down onto the axle of the wheel. I know it's a temp solution but you don't have to open the mouse.
Good oil can last you up to 10+ years
Thanks for the tutorial got a screw loose
Dropped the mouse and started hearing rattling unsure what it might be. After the dissassembly it turned out to be a screw. Anyone experienced that?
yea same here
im wondering where the screw goes.
@@Shadow-op5nk same
Sachko me
Same
I just needed to know where the screws are so I can open for a cleaning, thanks!
Pretty sure there is a hair or something similar in front of my sensor, might just need to do this since it likes to skip around randomly
How do I get the plastic cover off, wihch is on the top body this thing where the booth mouse klicks are? Like I accidentally dropped some ornage juice about it and its sticky.. but just between the mouse buttons and the body below it
Having a problem where my mice isnt clicking at time, but when it does it kinda double clicks
Same and when I hold down click it sometimes un-clicks and hold down clicks again
@@kozcs2 Im having the same issue as @koz.
@@TheBrotipz same issue any help?
@@Bouwer2100 it stopped working after a while. So it broke. I purchased a new mouse.
same
thanks for the video!
Is it possible to change the switches on this mouse? I want to change the right one for the left one because one has a double click and the other does not
do the teflon feet re-aply decently after you put it back together if so how did you do it?
they're really going to be the last thing you gonna be worrying about. you can just get some superglue and plop them back into their place anyway
Thanks for your help!
Thanks a lot you saved me buying a new one
happy to hear that I bought 3 and all of them had different problems
Hey dude, what is the key you use to open the mouse?
Thanks man this might be useful to clean the hair off of my mouse wheel
Hey I was thinking about moving my deathadder like a final mouse phantom by drilling holes in it to reduce weight... How Brittle is the plastic... I want a light mouse that I can palm grip but the final mouse is too small
If you want to make it lighter, I wouldn't recommend cutting holes into the top, because there would be VERY little weight reduction, at most 5-6g. I would recommend cutting pieces of plastic off the bottom or inside the mouse, which would be more efficient and effective, but make sure you're not damaging any important parts.
Great Value Bleach cool I have a broken deathadder so it would be a good expierement.. might upload my results to my channel voodoo gaming
What's the height of the TTC encoder? I need a replacement for mine. TIA
I have a problem with it that makes it really hard to click like a ton of pressure to click but everything else works
I bought one (deathadder elite 5g) and the mouse wheel is not working. Try everyrhing software related and nothing. Have you ever experienced this??
ty man, u r the best
PERFECT THX.. my issue, middle click didn´t work properly after a few months not using the mouse / FIXED: alcohol bath = anti viral can spray = did the job, let it dry = hot air, loob a little the moving axle... done
Thanks man
thanks for the help
What about unstable mouse wheels where it scrolls up a bit
i hate that. mine does it sooo much.
any fix yet
@@AintPopular no. This doesn't really matter to me anymore since i replaced my mouse with a basilisk v2
any way to open it up without ruining my mouse skates? I literally just applied new ones a few months ago
Yyyy Yes i thought of a genius idea
@@deanleung3422 tell m pls??
There are pointless long screws holding up the death adder led light module inside; they get loose and fallout. black plastic cracks that they screw into.
Open up carefully, take them both out, there is one of three bigger that is strong enough to keep it in place. Put it back together and you”re good.
Don’t worry the glue of the front back pad sticks well like new.
Also you have to poke a hole to get to the back underside screw, it doesn’t interfere with sliding.
Mine broke a couple years ago and when I push too hard on the side button it twists the module out of place :/
got pissed and lightly slammed the mouse onto the mousepad. instantly a rattling sound occured, going to open it up ill drop a like
In this case it's better to go for a psychologist
You are a legend
Hello I'm trying to take my mouse apart and clean it. I don't know how do I access the first screw?
anyone know how to be rid of the dreaded razer squeak for the death adder elite mine started a couple of days ago.i was wondering if i can lube it up somehow or spray it with some compressed airif someone could help i was very much appreciate it
Is there a way to make this mouse lighter, cause i like the ergonomics, though 105 gramms is pretty heavy weight.. it's my first mouse and i don't want to swap yet since it's fairly new. So does this baby include weights? otherwise i'll drill hole if necessary like i've someone doing before
No weights. Some guys used to rip off a big part inside the old DA, below the top shell which can't be seen when the mouse is put all together again. I didn't open my Elite yet to see exactly if it still can be done tho
commit helium balloon mod
Mine squeaked... every turn of the wheel a small squeak noise. Warranty replaced it. Sadly now after warranty gone, this one doing same thing. Probably needs just a touch of silicon grease. Shame screw holes are under the pads. They never seem to re-glue properly.
I've learned how to live with the squeak but now the wheel button is acting up so I guess I'll need to open it but then the issue with pads comes in...
Truly disturbing situation
having a problem where all the USB shut downs and when I hit the side of my keyboard with my mouse it shuts off ( mouse )
what is the name of the micro-switch?
im confused in the first 10 seconds why doesnt my mouse have a single screw around the whole mouse
Ty very much
I have a problem with the back side button. It Just get clicked by the air its so easy to click
Ty
what sensor that use?? 3366 or 3389
My left mouse button isn’t registering or something when I click sometimes
Thx 🙏🏼
the drawbakc is that in order to restore it internaly we have to ruin its feet
Thanks for this, just saved me the hassle of dealing with postal and or replacement costs
Dissamble the clickers too..
I think i have a newer model cuz mine doesnt have a screw on the back and im just opening it to clean it well nvm now
no it exists, you just have to break the film, It is unsettling, but you have to
:)
Braydden it’s the same for mine but there’s no film
my mouse doesnt have a hole and no bar code?
i spilled a bit of soda or something on the right mouse button and now it soft clicks. it so annoying. considering opening it up...
a screwhole which holds connectors for side buttons and dpi buttons broke off and the screw it self felt off which resulted in terrible noise inside. Easy fix, but very weak from razer since mouse is only 1,5 years old.
There’s no screw on mine can I still open it?
when i tried to take off the feet or whatever they are called it just tore off the glides and now i cant use the mouse
Using an exacto-knife is the best way
Thx Lot Bro ;)
;)
@@georgejoglidze1504 Can you share with us its omron switch codes?
So i can find same of them on the internet.
Thanks
HOW COME I DONT HAVE THE HOLE TO OPEN MY MOUSE ON MINE???
under the sticker
U purchased the male edition
the hole is there, you have to make it by your own, i used a screwdriver for that
I have to do this because of the squeaky mouse wheel problem and no way in hell that I send it all the way to hong kong where it arrived from...
Can dust make my mouse double clicking? I have mouse for 2 months and it started double clicking for some reason. never punched and my room is clear :D
got 3 dh elites all of them have issues but none have double clicking problem so I can't answer your question, version with dust is funny but impossible I have dusty Microsoft IO 1.1 and it still works perfectly
Giorgi Joglidze My keyboard got same issue, double typing ... razer is fcking worst company ever
Giorgi Joglidze my mouse on every like 10 clicks it double 1 time, and all again
@@jibaobao so strange never had this kind of problem with any gear
Giorgi Joglidze Idk but it’s annoying and i cant fix
Is there a back screw? Mine doesnt want to come off the back
yes, you can see it on 0:01 second where it is, you have to perforate to unscrew
Giorgi Joglidze thanks
i wanna open the top part
they made my razor death adder elite without a fucking screw hole to take off the bottom like hello
is there a weight anywhere inside of there?
no
dont need any...the mouse is heavy enough
music?
Thank you sir. Razzer quality is absolute crap! If it wasnt for the great shape of deathadder i would have moved on long ago.
That Music is good
Who clicked this just to see what's inside this mouse? I did... And for the knowledge along the road incase it breaks.
i fucked up the plastic part on the front hiding the 2 screws
Thank you sir! I found two loose screws inside and idk where to put it back.
Same here... Two fking screwa but no where to go.. maybe they put them in for backup?
@@Groepsdrug What color are they?
I have nothing under that sticker but no screw??
you have to perforate it's little bit upper from the bottom sticker, you can see where in the beginning of the video
@@georgejoglidze1504 The bottom skate?
Remember when you didn't have to install shitty invasive software in order to have a regular mouse?
Spray Deoxit on the buttons, click em a few to get the liquid inside, slap her back together, buy $14 new skates on amazon, done. Wash your hands before gaming, mt dew and Doritos dust all over everything.
do you know the name of these so called "razer mechanical mouse switches" ? Wonder if they're just Omron D2FC-F-7N's with a fancy green color
D2FC-F-K(50M) will help to learn more (insider.razer.com/index.php?threads/deathadder-elite-switches.18623/ will help to learn more)
I need to oil up my scroll wheel or something, but i don't wanna destroy the feet of my mouse...
Crazedtech yes i thought of a genius idea. I just opened mine without removing the feet. What i dis was take a needle and pick two tiny holes to where the screws are. Then i took a screwdriver and opened the mouse without the feet peeling. You will have two permanent holes in the feet but its much better than removing them.
whenever i shake my mouse, i hear some little peace or something, can someone help me fix it? Also, i dont have the screw hole in my model :///
you do have the screw hole, it's just under the stickers
craptastic razer quality brought me here
my deathadder elite doesnt have any screws wtf
I just want to see what's inside lol
Having issue with my Mouse wheel it goes top sometimes by itself (not physically pc detects like that.) Any idea to fix? Tried WD-40 didn't work
Where can I find sliders
You mean skates of mice?
On amazon
theres nothing in this mouse but its still 100g+
Bruh there's no screw on the bottom of my Razer Deathadder Elite
Bruh my muse doesn't have a screw
the Razer Deathadder Elite that i have doesnt have a screw on the bottom of it like yours...?
you have to perforate it's little bit upper from the bottom sticker
you can see where in the beginning of the video
Giorgi Joglidze how ?
I fixed My mouse, for the 10th time :) :) :) :) :) :) :) :) :) :) :) :) :(, I sincerely lost track of how many time I watched this video 0_0
i found a way to fix the rattling, just shake it to were the screw or loose part gets stuck somewhere lmao
Are the sliding devices destroyed?
yes, switched old ones with new
where can i get new ones?
@@georgejoglidze1504 mine are now broken and dont know where to get them?
Mine doesn't have that screw, wtf?