How to Recaulk A Boat!
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- Welcome to Marine Detail Supply - Tampa Bay!
In today's video, I'll show my process for recaulking a boat!
00:00 - How do I recaulk a boat?
00:25 - What do I need to redo the caulking on a boat?
01:39 - How do I remove caulking?
02:54 - How do I properly tape the seams?
06:00 - How do I properly apply the caulk line?
07:28 - How do I make sure the finish is clean and precise on my caulking?
Check out our products!
marinedetailsupplytb.com/
Thank you for being so helpful. I left the tape too long and I have to redo the job.
Informative video. However did I miss cleaning the surfaces before applying new chalking? And what about using finisher to smooth the chalking?
To easily remove old chalking try using a good stainless steel putty knife. It'll be much easier on your hands and less fatiguing.
To remove excess chalking try an appropriate diameter PVC pipe to scoop up. Two birds with one stone. Quick uniform chalking and the excess chalking gets collected inside the pipe. No mess and much quicker.
Excellent VID! Thanks for taking time to show different things that we could run into.....
Thanks, just caulked the seams on my fiberglass boat!
Great vid!
Who’s this professional looks amazeing
@@marinedetailsupplyco.-tamp3457 love videos keeping coming!!!
Whats easier removing the life caulk or the 3m 4200 product
🙌🙌😎
Are you guys located off 580 ? Or another place in Tampa I was interested in getting some detailing supplies for my freshwater ranger or getting my boat detailed possibly if that's an option 🤔
@@marinedetailsupplyco.-tamp3457 could you possibly give me a rough estimate for my 21ft ranger to do that hull detailing with the compound video I just watched my boat needs some love before I buy the equipment and do myself next time
I am looking at a boat where there is a lot of 5200 in the hull plank seams, the planks are strips of Mahogpny 1 x 3/8 by 1x 7/8. When you encounter 5200 that has to be repaired or removed, What do you do?????
@@marinedetailsupplyco.-tamp3457 Thank you very much for your response. What I have learned is all strip planked boats or most, are glued from the beginning and that 5200 isn't a bad choice when replacing planks strips. I learned that from a surveyor. Thanks again.
got a genoa track and it leaks. be appreciative for some expert advise. already pulled it off and is ready for sealant, but ur recomondation.
Thanks for asking so after making this video and testing several different caulks 3M 4000 UV is what I would recommend.
4000 I thought so . thx@@marinedetailsupplyco.-tamp3457
How much should I charge
Nothing about prepping?