Hey bro I love your videos I learn a lot from them but I have a quad not a dirt bike and I know you guys post more about dirt bike but can you post about quads more often I have a raptor 660 and just things like that type of quads thank you
Old video but i hope i can get some help anyway. So im about to remove the fuel tank and was wondering if i can skip the step where u start it and let run until it stals? Because it has not been running for several years so the oil and filters is not the best atm hehe. Is the step just so you dont get fuel everywhere? ^^
Video might be old but hopefully someone can help me out. I got a 2008 crf450, at low rpms it bogs out, needs the throttle cracked to start, runs rough up until its past 1/4 throttle but when Im in high rpms everything seems fine. After doing some research I found that it should probably be the fuel pump filter just like in this video. The problem is I cant find the filter in the manual nor fuel tank diagram. So my question is does it have the same filter, is it a different one or doesn’t it have filter. In case my bike does not have a filter what could the problem be? Perhaps something with the carburetor?
The 08 models did not have a fuel pump, they were gravity fed into the carburetor. You can get a fuel filter for your model. They are little cone shape fuel filters. You might have a clog somewhere in your carburetor. Pulling it out and cleaning it could solve the problem. If that doesn't help, new jetting kit would be where I would start.
Why should you replace the fuel pump or fuel pump assembly if there is more than a 1 mm gap between the tabs and hooks? I just replaced my filter on my 2016 crf250r and the tabs and hooks were holding firmly just fine however the gap between them was more than 4 thousands of an inch .004 . or 1 mm. Should I take it back out and replace the whole thing because of this? PLEASE HELP
Big scrap heap out back. A loader onto a flabed to a yard where metals are seperated and crushed and shipped back to asia to build 2020 models from (lead time in processing)
After replacing the filter is there any sort of priming that needs to be done? I just replaced my fuel filter and am having some trouble getting my bike going again. There is fuel running through the line and everything seems to be connected but it doesn’t even try to turn over when i kick it, any suggestions?
It might take a bit to start but it should prime itself after a few times of trying to turn over. Just make sure all your connections (fuel fittings, battery terminals, fuel filter wires) are all connected properly.
*Jaxon Slocum* So, the fuel is coming out of the fuel pump? Did you follow all of our steps in this video? Are you disconnecting the fuel feed hose from the pump? This should stop the gas from coming out once disconnected.
Jaxon Slocum another bike down via trying to follow the over the top service intravals ....honda loves it ...get the old bikes into the scrap heap and sell new ones ...disposable society...makes me want to SCREAM!
btw Jaxon Slocum...are you related to Joshua Slocum sailed round the world in a tiny sailboat? Joshua Slocum, Sailing Alone Around the World Joshua SlocumJune 21, 2012 Text Publishing Switch to the audiobook 3 Add to Wishlist Joshua Slocum was the first man to circumnavigate the world single-handed. His classic account of his voyage, Sailing Alone Around the World, has been captivating readers for over a hundred years. It remains one of the most thrilling and entertaining travel narratives of all time. Slocum writes of dangers and delights in encounters with Moorish pirates and Juan Fernandez islanders, tempests and languid seas, sharks and flying fish. Even if you are not into boats by the time you read this you will WANT TO BE!
TOTAL turn off! Makes me say SCREW IT! I want something Ican ride not stress out with ridiculous assemblies ...I am so sick of modern engineering...CRAP CRAP CRAP! You just wont convince me that stuff needs to be this elaborate stupid for things needing service so frequently ...RIDICULOUS!!
BTW service intervals for racing bikes have always been over the top. But you know what? Some kid living out in the dessert who's dad buys him a race bike to play on? Chances are he wont even read those intervals much less pay attention to them...I have seen ridiculously thrashed Japanese MXers that just keep going and going and going without all the required maintenance ...I even bought a used one from such riders multiple times ...you dont want to do that is my experience but I'm just saying there is keeping a machine "in spec" maximum competitive status...and then there is just riding the piss out of one until it's not fun anymore for whatever item is slowing things down LOL ...two different worlds man!
When testing should the needle bounce. When l hit the throttle it wants die.
Thanks for the video. It helped me replace my filter on my 19 crf250r
Hey bro I love your videos I learn a lot from them but I have a quad not a dirt bike and I know you guys post more about dirt bike but can you post about quads more often I have a raptor 660 and just things like that type of quads thank you
No
Old video but i hope i can get some help anyway. So im about to remove the fuel tank and was wondering if i can skip the step where u start it and let run until it stals? Because it has not been running for several years so the oil and filters is not the best atm hehe. Is the step just so you dont get fuel everywhere? ^^
You don't have to; it helps from spilling the fuel when removing the parts. Emptying the fuel system.
Video might be old but hopefully someone can help me out. I got a 2008 crf450, at low rpms it bogs out, needs the throttle cracked to start, runs rough up until its past 1/4 throttle but when Im in high rpms everything seems fine. After doing some research I found that it should probably be the fuel pump filter just like in this video. The problem is I cant find the filter in the manual nor fuel tank diagram. So my question is does it have the same filter, is it a different one or doesn’t it have filter. In case my bike does not have a filter what could the problem be? Perhaps something with the carburetor?
The 08 models did not have a fuel pump, they were gravity fed into the carburetor. You can get a fuel filter for your model. They are little cone shape fuel filters. You might have a clog somewhere in your carburetor. Pulling it out and cleaning it could solve the problem. If that doesn't help, new jetting kit would be where I would start.
Why should you replace the fuel pump or fuel pump assembly if there is more than a 1 mm gap between the tabs and hooks? I just replaced my filter on my 2016 crf250r and the tabs and hooks were holding firmly just fine however the gap between them was more than 4 thousands of an inch .004 . or 1 mm. Should I take it back out and replace the whole thing because of this? PLEASE HELP
Shouldn’t be a huge issue
what do yall do with all the dirtbikes once yall are done fixing them
Ride them
Big scrap heap out back. A loader onto a flabed to a yard where metals are seperated and crushed and shipped back to asia to build 2020 models from (lead time in processing)
Yes
Great!!
Muchas gracias por el video.
After replacing the filter is there any sort of priming that needs to be done? I just replaced my fuel filter and am having some trouble getting my bike going again. There is fuel running through the line and everything seems to be connected but it doesn’t even try to turn over when i kick it, any suggestions?
It might take a bit to start but it should prime itself after a few times of trying to turn over. Just make sure all your connections (fuel fittings, battery terminals, fuel filter wires) are all connected properly.
Rocky Mountain ATV MC Thanks! Ill have to do a once over on everything then.
Can someone tell me if a dirty filter can cause the engine to stall while riding please??
Yes, a dirty air filter could potentially cause your bike to stall.
I have a 2019 crf450x and it has been getting harder and harder to start could this be the issue?
Depending on the hours on the bike, I’d suggest checking valve clearances. Incorrect clearances can cause hard starting
Which neckbrace is Perfect for the Thor Guardian
Yes
Anyone know why fuel would continue to come out when the line is taken off? Just replaced the pump and filter and can’t seem to find the problem.
*Jaxon Slocum* So, the fuel is coming out of the fuel pump? Did you follow all of our steps in this video? Are you disconnecting the fuel feed hose from the pump? This should stop the gas from coming out once disconnected.
Jaxon Slocum did u find out wot was up with it leaking fuel
wigan9581 nope. Haven’t been able to get my bike to start since replacing the pump and filter also.
Jaxon Slocum another bike down via trying to follow the over the top service intravals ....honda loves it ...get the old bikes into the scrap heap and sell new ones ...disposable society...makes me want to SCREAM!
btw Jaxon Slocum...are you related to Joshua Slocum sailed round the world in a tiny sailboat?
Joshua Slocum, Sailing Alone Around the World
Joshua SlocumJune 21, 2012
Text Publishing
Switch to the audiobook
3
Add to Wishlist
Joshua Slocum was the first man to circumnavigate the world single-handed. His classic account of his voyage, Sailing Alone Around the World, has been captivating readers for over a hundred years. It remains one of the most thrilling and entertaining travel narratives of all time. Slocum writes of dangers and delights in encounters with Moorish pirates and Juan Fernandez islanders, tempests and languid seas, sharks and flying fish.
Even if you are not into boats by the time you read this you will WANT TO BE!
Cool, but it seems like a pain in the ass to have to do so often.
Gravity fed carbs on the old XR's... are so much nicer for maintenance
Wish I would have known this before buying a CRF.. these kits (OEM) are £105 UK. Every 30 rides!! Wow
Why not super filter the FUEL before it even gets to that filter? THEN how many rides? 100?
Nobody does this unless they’re making money riding their bikes.
My bike will not start. Thing it might be this poblem
cool
This bike don't have filter in fuel LINE? It's Just "pre filter"
30hours 😓
TOTAL turn off! Makes me say SCREW IT! I want something Ican ride not stress out with ridiculous assemblies ...I am so sick of modern engineering...CRAP CRAP CRAP! You just wont convince me that stuff needs to be this elaborate stupid for things needing service so frequently ...RIDICULOUS!!
BTW service intervals for racing bikes have always been over the top. But you know what? Some kid living out in the dessert who's dad buys him a race bike to play on? Chances are he wont even read those intervals much less pay attention to them...I have seen ridiculously thrashed Japanese MXers that just keep going and going and going without all the required maintenance ...I even bought a used one from such riders multiple times ...you dont want to do that is my experience but I'm just saying there is keeping a machine "in spec" maximum competitive status...and then there is just riding the piss out of one until it's not fun anymore for whatever item is slowing things down LOL ...two different worlds man!