Brand New MJJC Snowfoam Lance S V3.0 Is it Now The BEST??
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- MJJC have been hard at work listening to consumer feedback and reviews and have responded with this BRAND NEW S V3.0 snowfoam lance for SUPER THICK FOAM if that’s your thing…
In this video I try it out for the first time after unboxing it and showing how easily it’s built up, and also a real quick way to calculate the panel impact ratio (PIR) with it AND compare it to the MTM PF22 foam lance around the same price range
I hope you enjoy the video, don’t forget to like, share and subscribe to @GMDetails
#carcleaning #carcare #satisfying
Links to check out if you want to buy one direct from MJJC - www.mjjc.com/c...
New Snowfoam Shampoo - www.mjjc.com/p...
NEW!!, IN2Detailing have the MJJC lance
www.in2detaili...
Amazon run an affiliate programme for you to help support GMDETAILS , by clicking the links below before you buy anything from Amazon, it doesn’t even have to be anything in the links but just clicking and buying something else could give the channel a commission to help make these videos for you to enjoy , I’ve listed some of the popular products I get asked about
Amazon Links for recommended products (As an Amazon Associate, I earn from qualifying purchases.)
AUTOGLYM POLAR BLASTER amzn.to/34fmpAR
AUTOGLYM POLAR BLAST FOAM amzn.to/3uhyY9F
WHITE DRILL BRUSHES amzn.to/3wmDqrL
KÄRCHER K4 - amzn.to/3b1ZbCJ
KÄRCHER K4 Compact amzn.to/3BT9KDB
KÄRCHER K5 Compact amzn.to/3cYLR2a
KARCHER WD3P wet vac amzn.to/3hkTx14
ANGLED QUICK RELEASE EXTENSION 1/4'' - amzn.to/3q0GC62
KÄRCHER 15M HOSE - amzn.to/3r1PY2N
SHORT TRIGGER GUN (KÄRCHER K FIT) - amzn.to/2NJv5eh
MTM SGS35 STAINLESS STEEL GUN
www.ebay.co.uk...
MTM HYDRO PF22 SNOWFOAM LANCE
amzn.to/34KfzH3
WARM AIR DRYER FOR ALLOYS AND CREVICES - amzn.to/2RyTKDW
EZ SMALL WHEEL BRUSH - amzn.to/3fNdfmi
EZ LARGE WHEEL BRUSH - amzn.to/3dOvPHU
Interior Scrub Pads 4 pack amzn.to/2RrTBCu
RECORDING EQUIPMENT
APPLE IPHONE
PHONE HOLDER amzn.to/3L1BgCV
MANFROTTO MINI TRIPOD amzn.to/3uZwH6q
TRIPOD amzn.to/3MgBhD8
SUPPORT GMDETAILS linktr.ee/GMDE...
If you loved this video and you want to help support the channel, you can do so from even £1 by clicking on the support tab in linktree, thank you for your continued support 🎥
![The Wall Song ร้องข้ามกำแพง | EP.213 | กรีน อัษฎาพร | 3 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/3KrlLbCsadI/mqdefault.jpg)
Excellent video Graham full of useful, informative & relevant content. Many of the established detailing channels would do well to follow your structure instead of promoting themselves as the Yoda of all things related to valeting etc. It's easy to say but you should take no notice of the sycophantic detractors, as yours, Martin's , David's and Marks are mostly the only ones really worth watching.. I wouldn't let the majority of others anywhere near my cars & most don't have the courtesy to reply or acknowledge to comments. As for the MJJC, it looks good enough but when it is on general sale in the UK, any seller will sell you a foam cannon but won't stock a range of consumables or if they do they will be at inflated prices as with the V2. The bottle looks susceptible to damage & there are no spare mesh filters included. I have a V2 & and a MTM PF22.2 & a PF22, but the V2 is relegated to using up my BH Autofoam which won't be replaced The MTM's are by far the best overall cannons in my opinion, the only drawback is the bottle opening but that would entail a complete new casting so i doubt that would happen, but really it's not that big a deal. The consistency of the foam is completely different to the MJJC & that could only be improved by dialing back the mixture control but that would as you said lessen the PIR. It definitely has its place in the market for the likes of Bilt Hamber etc but i wouldn't buy another one as my go to foam cannon, however it's easier to strip down for maintenance but pointless if you can't get spares. Great work, keep it up 👍🏻
Wow Alan thank you so much mate!!, so you’ve noticed I get ignored by the ‘celebrity’ TH-camrs too eh 😉 doesn’t bother me in the slightest , they’re too busy entertaining mental health frauds to know good content when it’s there , the subscribers are growing fast and I’ll keep on doing what I do for guys like you who appreciate all the efforts , it really does make it all worth while so thank you again.
Hopefully Martin, Mark & Dave will see this too as I’ve pinned it to the top of all comments 🙌🏻🙌🏻
@@GMDetails As an an experiment Graham, i bought a clone off Aliexpres £14 delivered in 12 days.The manifold is identical to the MJJC minus the engraving and the colouring is almost the same and came with a proper stainless quick connect.. The fan assembly & actions are excellent and i assume are the same as the MJJC and the 5 gram fitted mesh filter which i swapped out for the MJJC 3 part set fits in exactly the same. The clear PET bottle is a bit shorter & wider with a bigger inlet and it has the same raised bottom centre to accommodatethe a weighted filter. i bought a very soft flexible pick up tube & a better quality stainless filter gravity ball and tried it out on Saturday with excellent results & drained every drop from the bottle. Better foam with BH Autofoam than the V2, £20 in all .. I mention the fitted mesh filter because i bought 2 from Yum cars for my PF22.2s at a cost of £17 delivered but i weighed them & they are only 2.7 gram, the cheapest of the cheapest !!! bloody robbers & i will never buy from them again. The 5 gram filters are only 60p on Aliexpress. Doubt that i will use the foam cannon much but just wanted to see if i could do it😂😂. Think we are being taken for mugs by the detailing industry, a lot of hype at a lot of cost to us.👍🏻
@alan taylor I love this !!!!, absolutely brilliant work Alan 👌
Can you provide a link to the one you got pls?
I can send a link for the silicone tubing which was £1 a metre & the gravity balls were 2 for £4 if you want. I bought 5mm Id x 7mm od. They are so good that I have put them on my pf22s
@@GMDetails I have tried to send you a link Graham but it does not work for me on TH-cam, if you let me have you email I will send you links for everything.👍
Without doubt Graeme this is one of my top detailing TH-cam channels. Honest view with quality useful information. Other review channels should take note and learn from your channel. The new lance looks great but not enough for me to spend my pension on so will stick with my current collection for now but great video mate👍
Thanks Martin 🥰 that’s made my day mate, 😀
I’ve always tried (sometimes a bit too hard) to be open and honest with my channel , highly criticised of late by some who refuse to say anything negative about a product so they can keep getting free stuff and that’s really not for me.
Good channels are pretty thin on the ground now and I include yours in my top watched channels as well mate, no bullsh*T and clear honest advice. 👌
You have v2 & the MTM, which do you prefer using ?
@@GMDetails I tend to switch between them depending on what foam I using. I have a bit of a soft spot for the MTM but the MJJC do seem to be evolving and looking to improve where the MTM seem to be standing still and letting others catch up
Have you ever tried any of the Autobrite ones from PA Italy?
@@GMDetails no mate not as yet
Great video Graeme. As always, no stone was left unturned. You've covered every aspect that might affect users of this new lance and shown the difference beside what is arguably the market leading snowfoam lance👍🏼
Brilliant editing, music and fantastic levels of information 👌🏼
Nice touch with the flag in the background at the end 🏴
Thanks Mark!, 🥰 I do love a snowfoam lance especially one brand new to the market and a tough marketplace too with the v2 pro possibly leading the table at the moment.
Thanks for the feedback on production too!, that really helps going forward 🙌🏻
🏴 there is a hint of ‘Scotland the brave’ in the background as well 🤣🤣
Some great advice there buddy, every foam is different is always the hardest thing some are thick some are thin
Thanks Kiran, wasn’t just about how it foams tho , some just don’t feel pleasant to use at all, I’m glad I didn’t pay full price for that Dooka one 🥴
So far I’ve thought it wasn’t much of an upgrade from v.2 just a fancy new bottle but you’ve really gone into detail with this and I look forward to getting my hands on one now 👍🏼
You getting one too?, brilliant I look forward to your testing too 🙌🏻
The first review of the "new" lance... Looks a bit of kit. Can see issues with trying to replace the bottle when it breaks. The head looks very similar to the old V2 and v1 just another colour ....
Great honest review Graeme.
Thanks mate, to be honest the body is the same with the nozzles slightly tighter so that it doesn’t turn when you adjust the fan, then the connection for the new bottle but yeah, I don’t think it’ll be the most robust if it blows off a work trolly out in the wind 🥴
Great video mate. Lots of really good information on the cannon and for me it's the best video I've seen about the cannon so far 💪
Thank you mate, really appreciate the feedback , I know you have unboxed yours and used it on the BMW so looking forward to a video on the lance if you have that planned 🤔
Great video Graeme, very thorough and lots of relevant information especially the difference in the bottle plastic from the v2, had to giggle at the "Scotlands favourite foam lance" too.
Thanks Paul , yeah that worked well I thought with the flag 🤣
Great concise, informative and well presented video, thanks.
Thanks Ian, you’re very welcome mate 😀
Great review! I wouldn’t say it’s a snow foam cannon… when on the highest foaming dial, it’s an avalanche cannon ❄️
Rebranding at MJJC as we speak , brilliant 🤣🤣🙌🏻
I haven’t got the v2 but have the v3. How did you feel the difference in between them?
Main body is the same , fan selection is nicer to rotate and each control is not affecting the other (fan and pitch)
I love how it connects to the bottle and the new pick up tube is much better , time till tell how the PET bottle lasts
@@GMDetails brilliant! I’ve dropped it couple of times and it seems to be pretty robust. The PET bottle does seem a lot thinner to the last cannon I was using. The clear bottle design is a winner for me
Great comparison and explanations. I got the V2 and was shocked at how quickly it used up the product and also how quickly the foam slid off. I use BH so was interested in seeing if thicker foam improved things; it did not. Costs more in product and less effective dwell time so will be looking to get MTM if can find at decent price.
If you don’t mind the older MTM bottle you can get them on eBay for £50 mate , interesting to hear about thickening up Bilt Hamber , so it must dry that out a little too, 🤔
I choose MJJC Pro which has Balance, a wider container mouth opening, threaded stays on better, a nice container shape and is affordable. V3.0 has a clear bottle and easier-to-see markings, if dropped the bottle may pop off or crack, more expensive than Pro makes little sense. The headpiece is the same build just V3 has a different bottleneck size.
Nice one Rich!, I can only advice you to thoroughly rinse the lance out after every use and don’t use it for applying spray and rinse sealants as it has 2 gauzes and a foam buffer , so 3 times the foaming parts of any other lance , do that and it’ll last years!!
I was never a fan of their previous incarnation, thought it was over rated. After this excellent review I will stick with my MTM and autobrite lances.
Thanks Chris, yes I agree the MTM & AD lances are absolutely fantastic 👌
Excellent informative video Graeme! this is exactly the kind of info people potentially wanting to buy this lance want to see.
For me personally at a price of £65 id rather buy the MTM lance, i do like a thick foam but i also like a foam to be able to sit on the panels without just falling off.
Thanks mate, yeah at £25 more then the v2 it’s a steep jump at the moment hopefully the price drops a little in time like the v2 did, I’m sure that was around £65 when it was launched too 🤔
I'm with Martin @OCD on this offering but if the 3 foam canons I have from Angelwax and Autobrite ever expire it would be on my wish list but by then we will be looking at V10 I'm sure. I was looking forward to your views on M & K Snow but you didn't comment. Interesting video as usual. I am waiting for someone to tell me definitively how much better PIR to standard 1 to 9 dilution is in cleaning a car.
Thanks John, I had a sorry, 4 different Angelwax lances and returned every one of them and when I went back, there was a box full of them 😳 so I hope they’ve sorted their issues with it , no issues with the Autobrite ones I have , they are brilliant
Re the snowfoam, I didn’t give any feelings towards the snow foam as the MJJC made it all fall to the floor. Where the MTM made it cling longer but I wasn’t paying particular attention to cleaning power of the two as I was concentrating on the MJJC for the review , but I was impressed with Snow for the record
PIR , well it’s really only Bilt Hamber that really mentions it and doesn’t give a choice so calculating PIR would only benefit you if you want to use Autofoam or Garage Therapy foams , most brands use a standard dilution method to keep it simple
@@GMDetails Re PIR I thought that would be your answer but I do appreciate the reply. I have never used Bilt Hamber products apart from Atom Mac. Re the M&K Snow it looked like it was removing dirt for you in the dirty suds under the car. My Angelwax lances keep getting clogged but that maybe was my fault if I forget to rinse them out after use but I have a stock of gauze's now and apertures in different sizes so I can maintain them and have had no issues since and have upgraded to quick release so I can use with my stubby gun. The only thing is I like the thicker bottomed reservoir and the weighted pick up tube on the newer ones as mine are unstable empty like you highlighted.
The thick foam looks the business but like you've mentioned it just runs off to fast to have a proper dwell time. Always enjoy your videos.
Thanks mate , maybe it’ll not run off so quick if I run round the car quicker 🤣
@@GMDetails I have a couple of Chinese cannons I bought some time ago, the one you could do 4 cars with one 1 litre, it drains down very slowly yet still is good. The other absolutely empties it. You got to rush to get one car done from one litre.
Weird how different they all are when all they’re using is the Venturi effect 😅
Cracking video , was hoping to get one out this week , but that will have to wait as too man projects on the go this week .... Really interesting to see how it performs I like the way the bottle attaches on this lance must admit it felt quite study altho it feels like replacement bottles could be a pain if they break .
Great video , make me wanna have a play with my one now
Thanks Darren , just heard that In2detailing will be stocking the v3.0 and possibly spares but it’s certainly a concern that PET bottle
@@GMDetails yeah that's my about these bottles
Many thanks for sharing Graham, always very good, honest content from yourself, the time and effort that goes into filming, editing and producing these are appreciated, the graphics are an added touch of class.
Like many will say no doubt, I'll stick with my PF22.2 which is used most of the time, I have an MJJC (V1 - if that's its name?) which I do like, it does produce thicker foam which isn't always wanted, but the overall user experience isn't bad at all, and it will remain in my arsenal.
Thanks Ally, really appreciate your comments there mate 👌
Superb video as always. The lance really does look a quality well built unit again like the v2 which also came well presented. Certainly seems like it will appeal to the enthusiasts and the lance collectors out there. Performance wise I'm not sure it offers anymore than the v2. Will be interesting to see if there's any plans for in2d to distribute it
Thanks Andy, yeah I do like it, it’s a nicely improved tool but the thickness of the foam is possibly going to aid thinner foams last a bit longer and will be welcomed by those users.
It’s a little pricey at £70 posted direct as well so maybe it’ll come down a bit if uk distributers start selling it like the v2
Great video and very informative. I spoke with In2detailing and they will stock the new MJJC V3.0. They are based in Dundee and will ship all over UK
Brilliant news David thanks 👌
@@GMDetails You are welcome. I visited recently and Imran mentioned he is expecting their order soon. Check their website for an update and information 😀
Awesome 👌
And a great review once again. The new lance certainly looks great but I see no reason to replace my MJJC V1 for it. The softer, more flexible pick up might be a plus though. I had to replace mine because it broke right on top of the filter/metal weight. Maybe it hardened over time. I only use BH snowfoams nowadays so MJJC is the lance for me😂
Ahhh thanks mate, very interesting comments there , v1 MJJC being the tall bottle? That’s weird it hardened the pick up straw , do you keep product in the lance between uses?
I’ve had comments saying the MJJC doesn’t make Bilt Hamber perform and better than any other lance and it’s interesting you have found it works best for you , just shows not everyone gets the same results 👌
@@GMDetails Hey Graeme, no it's not the tall one. It's the same as the V2 (I've got a rebranded one). And I always rinse it out with water before storing. As for the BH foam, it will always be thinner than other foams but with the MJJC lance I can get it a bit thicker😅. Touchless will do better in that aspect than Autofoam.
Thanks for clarifying mate 🙌🏻
Another top video mate. 👏👏
Thank you very much 👋
Great video on a great product. I've purchased a snide one off Ali Express and will be interesting to see how it fares when it shows up. The thumbnail for the video was a bit misleading 😅
Ha ha ha sorry it wasn’t as you expected 😅 be great to hear how you get on with the clone 🤔
@@GMDetails I will update once I've used it
Cheers matey 👌
Another great review video Graeme, the only thing I took away from this new one was the direction and fan adjustment were better. Must admit my v2 can be a pain to turn with wet hands but I think for now I'll stick with it as I've got a spare one from Direct hoses which is pretty damn good. The price has also gone up significantly too and I need to save some cash for a bigger project.
Thanks Paul, I’d predict by the time it’s sold in the uk by distributers it’ll fall possibly to sub £50
I had a DH lance as my first one and agree it is an absolute cracking lance , I gave it away when I got my Autobrite one but wish I’d kept it now
Top work there Graeme, a really good review. I've been saying I want a V3, I have the V2 and the excellent AD lance as well and, after watching this video, I think I might grab the MTM lance, when I get a few sheckles spare. I do use BH SF so the V2 will always be used for that but that's my winter SF, in the summer I switch to PH neutral, and there's no need for the thickness the MJJC offers. 1 little question, has your V2 MJJC ever dropped the vessel off of the threaded cap, mine has a few times. All the best Graeme.
Thanks Lee, yeah I think if the MTM had a wider neck it would be unbeatable but there you go, I don’t use the v2 all that often Lee, but it hasn’t dropped off the thread so far , haven’t heard of it doing so with others either , v2 can be used with a litre standard bottle too screwed inside the cap if you look under 😉
@GM Details whoa, I didn't realise that, that's interesting, I could just whack the AD vessel on there. Cheers Graeme. 🍻
Hope it’s a solution for you 🙌🏻
no one talks about the HOLE in the cap. It leaks "slippery" soap any time you tilt or shake product. it's a bad design. I want to return this and go to V.2 PRO. It's weird that all if a sudden MJJC is not responding to my emails, they sure were when I wanted to buy!!@ i hope I get a resolution soon!
Hey Linda!, I did mention it leaked when upside down but I don’t think I’ve seen a hole in the cap on mine as it doesn’t leak when I’m using it normally
I hope you get a resolution soon 👍
Looks decent enough lance to me if you have a v2 there's no point in going for a v3 but if your buying a new one get a v3 maybe have they done away with the spare filter in the boxes now ?
That’s a good shout or if yours is broken & want an upgrade get v3, my v2 came with all sorts of adaptors & spare parts but v3 only has what you’ll need and spares are available from MJJC direct
@@GMDetails there hard to get in the uk atm Aswell which is silly really there not widely available and being set to uk reviewers
@@bigdtailing1950 same thing happened with v2.0 , hopefully In2detailing and a few others take some on board for the UK
Great video as always.
I think the MJJC is PERFECT if you are a Bilt Hamber lover, either the Auto Foam or the Touchless, as it'll give you just a tad more foam and cling.
However, for anything else this might just be a bit of overkill.
The only thing I will ask though is, before you did the comparison, did you strip down the MTM and descale the metal gauze?
I dont know what the water hardness is like where you are, but in my experience they clog with limescale and sediment very easily and that just hampers the foam.
I have to descale my guaze at least once a quarter.
Thanks mate, ah good thinking but no there’s absolutely zero chance of scale where I am, the softest of unicorn tears water flows from our taps here 😅
I also flush out the lances after every use and don’t use lance applied sealants with them so the gauze is fine , the MJJC has ramped up the ability to make even thicker foam than before and although it’s great for photographs you have to apply it quick so you don’t create the thick layers that are too heavy to cling , or maybe stand further back while applying it 🤔
@@GMDetails hehehe. Interesting. So definitely one for the slightly lower foaming snow foams or those with very under-powered pressure washers then!
Here down south, my water is harder than Rocky Balboa! 🤣
@@AntEloftheHouseofEl same as mr McMahon he should leave this tool well alone with his rocks for water 😅
Great review, mate 👍
For me the MTM gave the better consistency - not as heavy or dry and more bubbles.
Don’t really like the looks of the new MJJC but could be a good opportunity for people to pick up the last model cheaper when this one is released haha
Thanks Craig, hmmm not sure as MJJC are keeping v1 , v2 and v3 all current choices depending on budget but if you have the money for one , MTM would be the one for me long term
@@GMDetails just looked on the website cos I’ve never actually looked at their range and it seems like they’ve confused things with version numbers (maybe based on product release). Their range is;
Classic
S
Pro
And this new lance is an upgrade to the S model.
Interesting stuff!
😳😳 ITS TRUE!!!!, staring us all right in the face of course!!!!, all makes sense now!!!
@@GMDetails the internet is a wonderful place, sometimes a little bit of research pays off 👍
Aye all right rub it in 🤣
I wouldn't recommend leaving water in the bottle to go stagnant....it's still too top-heavy and won't ever become part of my set-up. The v2 Pro is fine in every department!