Time For Some Front-End Travel on the c10!
ฝัง
- เผยแพร่เมื่อ 22 พ.ย. 2024
- we are back on the c10, this time trying to get some front end travel with some Moroso trick springs, some 90/10 shocks and some cutting so we can transfer some weight to the rear.
Thanks for Watching!!!!
#c10 #builtnotbought #hotrod #carvlog #automobile #v8engine #v8muscle #squarebody #chevy #chevytrucks #funnyvlog #funny - ยานยนต์และพาหนะ
Y’all crack me up! Love this channel.
Y’all going places with this channel for sure!
Keep’em a coming. 😎
My guys always start my fri night off right with a laugh
Thanks brother!🤙
Paint shaker 3000 needs an award after that one! I about fell off the couch laughing!!!
@@Racetruckdude 🤣🤣
Just put big block springs on my 68 Nova. Made it look like a gasser, had to cut a bit of the coil off. I can’t stand the Carolina squat look 😂 Love the videos guys! Hope you’re doing good Ed!
@@meganwilson7290 yeah hopefully it’s not squatted!🤣 Thanks!✌️
I just put a set of trick springs in my 68 c10 last weekend. Our suspension is the same. I used a coil spring compressor from O'Reilly that hooks inside the coils. Worked great and was pretty easy. I did cut a coil to get the ride height correct. Love the videos guys
@@CMurderC10 I might check that out man thanks!🤙
you're welcome
@CMurderC10 going to ditch my 3 in drop spindle with stock spindles and do trick springs. What part number spring did you use or spring rate. I'm a iron block ls
i been waiting for a video on the C10. Glad you chose Moroso trick spring . you can move the radiator to the bed area and relocate the transmission cooler too.but the coils will transfer the weight just fine.great content brothers,,,
@@rachalhollier5679 Thanks man!🤙
Crusty getting some love
@@CCAutoWorks yes sir! Thanks man!🤙
You may not be able to just replace the aluminum rods , usually the crank has a lot of weight taken out of it
It’s about to turn into a snow ball ain’t it!🤣🤣
Love it. Oh BTW, got about 20 layers of candy on my 2000 S10 chassis last weekend. 6 straight hours of forgetting to wear a respirator at all lol. At least it was windy and dusty and covered in leaves..it's like mossy oak does candy, only the best 👌 😂😅 also my breathing is like you when Chris lights up..not great lol #TeamSafetyThird
@@beasyphone 🤣🤣 sounds like a day at Ed’s Garage!🤘
Harbor freight spring compressor tool
Hey Marlboro man u better wear safety glasses when running that wire wheel ,I dang near put my eye out with one , goodluck and we are enjoying the videos ! You need dropped spindles for the c10 frt end.
Safety first! The c10 has drop spindles on it, we gonna put the stock ones on it.
Hell yea im hoping and praying for ur health. Keep up the hard work and dedication towards the channel and much love to ya from Maryland ❤❤❤.
@@melvinrawlings1457 Thanks bro I appreciate it!✌️
Good to see you guys back and Ed feeling better. Crusty is definitely going to look better with the nose a little higher. Those are some tall springs though. You might have to cut them to get them in the truck. Oh by the way Chris JUST SEND IT! Nah, I agree about not doing any unnecessary damage to the motor. 👍💯
@@GasCarGarage yeah if it’s squatted we definitely gonna have to cut some🤣 Thanks brother!🤙
@@EdsGarage99 yessir
👍👍
Love our weekly dose of Ed's Garage
@@PlaytimeRacing Thanks bro!🤘
I like eds garage paint and body krylon corner behind the welding shop
@@markphillips8238 🤣🤣
😅 FUNNY 🤣💪🏾👍🏾😜🙏🏾🪛🔩🔧💯
u beat me to trying those springs, hope you get it figured out!!!
@@csharp8126 shit I done spent the money, we gonna make them fit even if it’s wrong 🤣
@ could u compress it with a spring compressor then try to fish that screw to get a deeper bite?
Paint can slung a rod 😂
@@fivestar8337 🤣🤣
That’s a steal for 2500$
Yes sir!
Been thinking about doing this to mine so I'm wondering how it's gonna sit when youre done. I've read a few guys have ran the Moog 81114 springs on theirs with success. I think i would find a close face helmet to wear when youre compressing those. 😂 See you next week!
@@fivestar8337 yeah hopefully doesn’t look like a squatted truck 🤣 🤙
I've tried those moog 81114 springs off a trailblazer before but it wasn't a drastic change in how easily it lifted and it sat to low with my 3 inch spindles.
I'm now interested in trying some trick springs or I've heard v8 grand cherokee springs as well, now that I got a set of stock height spindles again
@matthdz6369 how hard were they to get in? I don't wanna go as low on the rate as the trick springs and get it too soft on the street
@fivestar8337 they were hard to get in but nothing like what the trick springs look like iwas able to get the bottom coil in the pocket chain it up and jack the lower control arm up. Make sure you got some tall jackstands
Take some 90 percent running alcohol on a rag and wipe the screen or where ever the paint got on the camera it will come off
hey, gen 2 garage has a video about putting in Trick Springs. Tommy put a set on his C1500. He used a tip he saw on a video on Ordinary Guy Garage. Check 'em out.
@@williambrown8689 yeah I’ve seen them both actually a while back but on the c10 the shock doesn’t go through the spring and there isn’t a hole on the top spring pocket so we just tried something different but I think we gonna cut a hole and do it that way. Thanks for looking out though man we appreciate it!🤙
Don’t tear that motor up ! Put some iron rods on it and make sure she lasts !! And you can make more then half of one run down the track ! Big love from edgemere Maryland
Thanks bro!✌️
If y'all boys was in KY we would give the people a good video and send my shit packing it's front wheels. Like the old man says " come on"
Did yous get hooked up with Jeremy and get that 468 BB ?
Or was he just full of b.s
@@chrisv6008 he said we need to set up a time and I told him I only have the weekend and he said he works on the weekends so Chris said he can meet up during the week and haven’t heard anything 🤷🏻♂️
🐂💩
@EdsGarage99 jezzz what a guy he is
Making yous think you may have a line on an engine
What part number did u go with?
@@matthdz6369 47200
@EdsGarage99 1750-1810 front spring weight seems kinda light u sure it's gonna hold the truck up of the bump stops 😂 just messing with you man, any luck getting them in yet want to pick up a set for mine, iron ly6 no inner fenders no ac stuff, battery is out behind the axle I'm guessing I should have similar front end weight as you what did yours weigh in at?